[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <194d8f8008a965d68812738f7530e07856952d3a.1313360100.git.joe@perches.com>
Date: Sun, 14 Aug 2011 15:16:19 -0700
From: Joe Perches <joe@...ches.com>
To: Eilon Greenstein <eilong@...adcom.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH V2 net-next 1/3] bnx2x: Remove local defines for %pM and mac address
Use %pM and mac address directly instead.
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 4 --
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 41 +++++++++-------------
3 files changed, 23 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index c423504..5aac959 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -115,10 +115,6 @@ do { \
dev_info(&bp->pdev->dev, __fmt, ##__args); \
} while (0)
-#define BNX2X_MAC_FMT "%pM"
-#define BNX2X_MAC_PRN_LIST(mac) (mac)
-
-
#ifdef BNX2X_STOP_ON_ERROR
void bnx2x_int_disable(struct bnx2x *bp);
#define bnx2x_panic() do { \
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 1507091..173b258 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9315,9 +9315,8 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
val = MF_CFG_RD(bp, func_ext_config[func].
iscsi_mac_addr_lower);
bnx2x_set_mac_buf(iscsi_mac, val, val2);
- BNX2X_DEV_INFO("Read iSCSI MAC: "
- BNX2X_MAC_FMT"\n",
- BNX2X_MAC_PRN_LIST(iscsi_mac));
+ BNX2X_DEV_INFO("Read iSCSI MAC: %pM\n",
+ iscsi_mac);
} else
bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
@@ -9327,9 +9326,8 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
val = MF_CFG_RD(bp, func_ext_config[func].
fcoe_mac_addr_lower);
bnx2x_set_mac_buf(fip_mac, val, val2);
- BNX2X_DEV_INFO("Read FCoE L2 MAC to "
- BNX2X_MAC_FMT"\n",
- BNX2X_MAC_PRN_LIST(fip_mac));
+ BNX2X_DEV_INFO("Read FCoE L2 MAC to %pM\n",
+ fip_mac);
} else
bp->flags |= NO_FCOE_FLAG;
@@ -9384,9 +9382,9 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
if (!is_valid_ether_addr(bp->dev->dev_addr))
dev_err(&bp->pdev->dev,
"bad Ethernet MAC address configuration: "
- BNX2X_MAC_FMT", change it manually before bringing up "
+ "%pM, change it manually before bringing up "
"the appropriate network interface\n",
- BNX2X_MAC_PRN_LIST(bp->dev->dev_addr));
+ bp->dev->dev_addr);
}
static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index df52f11..b4d9c16 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -707,9 +707,8 @@ static void bnx2x_set_one_mac_e2(struct bnx2x *bp,
bnx2x_vlan_mac_set_cmd_hdr_e2(bp, o, add, CLASSIFY_RULE_OPCODE_MAC,
&rule_entry->mac.header);
- DP(BNX2X_MSG_SP, "About to %s MAC "BNX2X_MAC_FMT" for "
- "Queue %d\n", (add ? "add" : "delete"),
- BNX2X_MAC_PRN_LIST(mac), raw->cl_id);
+ DP(BNX2X_MSG_SP, "About to %s MAC %pM for Queue %d\n",
+ add ? "add" : "delete", mac, raw->cl_id);
/* Set a MAC itself */
bnx2x_set_fw_mac_addr(&rule_entry->mac.mac_msb,
@@ -801,9 +800,9 @@ static inline void bnx2x_vlan_mac_set_rdata_e1x(struct bnx2x *bp,
bnx2x_vlan_mac_set_cfg_entry_e1x(bp, o, add, opcode, mac, vlan_id,
cfg_entry);
- DP(BNX2X_MSG_SP, "%s MAC "BNX2X_MAC_FMT" CLID %d CAM offset %d\n",
- (add ? "setting" : "clearing"),
- BNX2X_MAC_PRN_LIST(mac), raw->cl_id, cam_offset);
+ DP(BNX2X_MSG_SP, "%s MAC %pM CLID %d CAM offset %d\n",
+ add ? "setting" : "clearing",
+ mac, raw->cl_id, cam_offset);
}
/**
@@ -2579,9 +2578,8 @@ static inline void bnx2x_mcast_hdl_pending_add_e2(struct bnx2x *bp,
cnt++;
- DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
- " mcast MAC\n",
- BNX2X_MAC_PRN_LIST(pmac_pos->mac));
+ DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+ pmac_pos->mac);
list_del(&pmac_pos->link);
@@ -2702,9 +2700,8 @@ static inline void bnx2x_mcast_hdl_add(struct bnx2x *bp,
cnt++;
- DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
- " mcast MAC\n",
- BNX2X_MAC_PRN_LIST(mlist_pos->mac));
+ DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+ mlist_pos->mac);
}
*line_idx = cnt;
@@ -2998,9 +2995,8 @@ static inline void bnx2x_mcast_hdl_add_e1h(struct bnx2x *bp,
bit = bnx2x_mcast_bin_from_mac(mlist_pos->mac);
BNX2X_57711_SET_MC_FILTER(mc_filter, bit);
- DP(BNX2X_MSG_SP, "About to configure "
- BNX2X_MAC_FMT" mcast MAC, bin %d\n",
- BNX2X_MAC_PRN_LIST(mlist_pos->mac), bit);
+ DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC, bin %d\n",
+ mlist_pos->mac, bit);
/* bookkeeping... */
BIT_VEC64_SET_BIT(o->registry.aprox_match.vec,
@@ -3233,9 +3229,8 @@ static inline int bnx2x_mcast_handle_restore_cmd_e1(
i++;
- DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
- " mcast MAC\n",
- BNX2X_MAC_PRN_LIST(cfg_data.mac));
+ DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+ cfg_data.mac);
}
*rdata_idx = i;
@@ -3270,9 +3265,8 @@ static inline int bnx2x_mcast_handle_pending_cmds_e1(
cnt++;
- DP(BNX2X_MSG_SP, "About to configure "BNX2X_MAC_FMT
- " mcast MAC\n",
- BNX2X_MAC_PRN_LIST(pmac_pos->mac));
+ DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n",
+ pmac_pos->mac);
}
break;
@@ -3357,9 +3351,8 @@ static inline int bnx2x_mcast_refresh_registry_e1(struct bnx2x *bp,
&data->config_table[i].middle_mac_addr,
&data->config_table[i].lsb_mac_addr,
elem->mac);
- DP(BNX2X_MSG_SP, "Adding registry entry for ["
- BNX2X_MAC_FMT"]\n",
- BNX2X_MAC_PRN_LIST(elem->mac));
+ DP(BNX2X_MSG_SP, "Adding registry entry for [%pM]\n",
+ elem->mac);
list_add_tail(&elem->link,
&o->registry.exact_match.macs);
}
--
1.7.6.405.gc1be0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists