| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <aeb2d1e4eb36e6a0265ed0e6c279e81880bbfef2.1313585187.git.mina86@mina86.com>
Date: Wed, 17 Aug 2011 15:03:07 +0200
From: Michal Nazarewicz <mnazarewicz@...gle.com>
To: "Sebastian Andrzej Siewior" <bigeasy@...utronix.de>,
"Yang Rui Rui" <ruirui.r.yang@...to.com>,
"Felipe Balbi" <balbi@...com>
Cc: Greg Kroah-Hartman <gregkh@...e.de>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] usb: gadget: get rid of USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED
From: Michal Nazarewicz <mina86@...a86.com>
This commit removes the use of USB_GADGET_DUALSPEED and
USB_GADGET_SUPERSPEED Kconfig options. Those were selected
by UDC drivers which supported respective speeds.
However, since kernel now allows multiple UDC drivers to be
compiled, the options in question may no longer reflect the
state of all gadgets.
For instance, if one driver that supports dual speed is selected
and another that does not, the USB_GADGE_DUALSPEED will be set
"for both".
This commit replaces all the #ifdefs by a run-time checks made
by calling gadget_is_dualspeed().
Signed-off-by: Michal Nazarewicz <mina86@...a86.com>
---
drivers/usb/gadget/Kconfig | 30 -------------------
drivers/usb/gadget/composite.c | 9 +-----
drivers/usb/gadget/file_storage.c | 4 --
drivers/usb/gadget/inode.c | 18 ++---------
drivers/usb/gadget/printer.c | 59 ++++++++++--------------------------
drivers/usb/gadget/u_ether.c | 7 ----
6 files changed, 21 insertions(+), 106 deletions(-)
Please note that because I'm currently lacking hardware to test it
(and PandaBoard seem out of stock everywhere), the code is
compile-tested only.
It is applied on top of next-20110817.
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5a084b9..c60c167 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -133,7 +133,6 @@ config USB_AT91
config USB_ATMEL_USBA
tristate "Atmel USBA"
- select USB_GADGET_DUALSPEED
depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
USBA is the integrated high-speed USB Device controller on
@@ -142,7 +141,6 @@ config USB_ATMEL_USBA
config USB_FSL_USB2
tristate "Freescale Highspeed USB DR Peripheral Controller"
depends on FSL_SOC || ARCH_MXC
- select USB_GADGET_DUALSPEED
select USB_FSL_MPH_DR_OF if OF
help
Some of Freescale PowerPC processors have a High Speed
@@ -158,7 +156,6 @@ config USB_FSL_USB2
config USB_FUSB300
tristate "Faraday FUSB300 USB Peripheral Controller"
depends on !PHYS_ADDR_T_64BIT
- select USB_GADGET_DUALSPEED
help
Faraday usb device controller FUSB300 driver
@@ -206,7 +203,6 @@ config USB_PXA25X_SMALL
config USB_R8A66597
tristate "Renesas R8A66597 USB Peripheral Controller"
- select USB_GADGET_DUALSPEED
help
R8A66597 is a discrete USB host and peripheral controller chip that
supports both full and high speed USB 2.0 data transfers.
@@ -220,7 +216,6 @@ config USB_RENESAS_USBHS_UDC
tristate 'Renesas USBHS controller'
depends on SUPERH || ARCH_SHMOBILE
depends on USB_RENESAS_USBHS
- select USB_GADGET_DUALSPEED
help
Renesas USBHS is a discrete USB host and peripheral controller chip
that supports both full and high speed USB 2.0 data transfers.
@@ -249,7 +244,6 @@ config USB_S3C_HSOTG
tristate "S3C HS/OtG USB Device controller"
depends on S3C_DEV_USB_HSOTG
select USB_GADGET_S3C_HSOTG_PIO
- select USB_GADGET_DUALSPEED
help
The Samsung S3C64XX USB2.0 high-speed gadget controller
integrated into the S3C64XX series SoC.
@@ -287,7 +281,6 @@ config USB_S3C2410_DEBUG
config USB_S3C_HSUDC
tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
depends on ARCH_S3C2410
- select USB_GADGET_DUALSPEED
help
Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
integrated with dual speed USB 2.0 device controller. It has
@@ -298,7 +291,6 @@ config USB_S3C_HSUDC
config USB_PXA_U2O
tristate "PXA9xx Processor USB2.0 controller"
depends on ARCH_MMP
- select USB_GADGET_DUALSPEED
help
PXA9xx Processor series include a high speed USB2.0 device
controller, which support high speed and full speed USB peripheral.
@@ -311,14 +303,12 @@ config USB_PXA_U2O
config USB_GADGET_MUSB_HDRC
tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
depends on USB_MUSB_HDRC
- select USB_GADGET_DUALSPEED
help
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
config USB_M66592
tristate "Renesas M66592 USB Peripheral Controller"
- select USB_GADGET_DUALSPEED
help
M66592 is a discrete USB peripheral controller chip that
supports both full and high speed USB 2.0 data transfers.
@@ -335,7 +325,6 @@ config USB_M66592
config USB_AMD5536UDC
tristate "AMD5536 UDC"
depends on PCI
- select USB_GADGET_DUALSPEED
help
The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
It is a USB Highspeed DMA capable USB device controller. Beside ep0
@@ -363,7 +352,6 @@ config USB_FSL_QE
config USB_CI13XXX_PCI
tristate "MIPS USB CI13xxx PCI UDC"
depends on PCI
- select USB_GADGET_DUALSPEED
help
MIPS USB IP core family device controller
Currently it only supports IP part number CI13412
@@ -374,7 +362,6 @@ config USB_CI13XXX_PCI
config USB_NET2272
tristate "PLX NET2272"
- select USB_GADGET_DUALSPEED
help
PLX NET2272 is a USB peripheral controller which supports
both full and high speed USB 2.0 data transfers.
@@ -398,7 +385,6 @@ config USB_NET2272_DMA
config USB_NET2280
tristate "NetChip 228x"
depends on PCI
- select USB_GADGET_DUALSPEED
help
NetChip 2280 / 2282 is a PCI based USB peripheral controller which
supports both full and high speed USB 2.0 data transfers.
@@ -429,7 +415,6 @@ config USB_LANGWELL
tristate "Intel Langwell USB Device Controller"
depends on PCI
depends on !PHYS_ADDR_T_64BIT
- select USB_GADGET_DUALSPEED
help
Intel Langwell USB Device Controller is a High-Speed USB
On-The-Go device controller.
@@ -444,7 +429,6 @@ config USB_LANGWELL
config USB_EG20T
tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
depends on PCI
- select USB_GADGET_DUALSPEED
help
This is a USB device driver for EG20T PCH.
EG20T PCH is the platform controller hub that is used in Intel's
@@ -466,7 +450,6 @@ config USB_EG20T
config USB_CI13XXX_MSM
tristate "MIPS USB CI13xxx for MSM"
depends on ARCH_MSM
- select USB_GADGET_DUALSPEED
select USB_MSM_OTG
help
MSM SoC has chipidea USB controller. This driver uses
@@ -487,8 +470,6 @@ config USB_CI13XXX_MSM
config USB_DUMMY_HCD
tristate "Dummy HCD (DEVELOPMENT)"
depends on USB=y || (USB=m && USB_GADGET=m)
- select USB_GADGET_DUALSPEED
- select USB_GADGET_SUPERSPEED
help
This host controller driver emulates USB, looping all data transfer
requests back to a USB "gadget driver" in the same host. The host
@@ -513,17 +494,6 @@ config USB_DUMMY_HCD
endchoice
-# Selected by UDC drivers that support high-speed operation.
-config USB_GADGET_DUALSPEED
- bool
- depends on USB_GADGET
-
-# Selected by UDC drivers that support super-speed opperation
-config USB_GADGET_SUPERSPEED
- bool
- depends on USB_GADGET
- depends on USB_GADGET_DUALSPEED
-
#
# USB Gadget Drivers
#
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5a3461e..a0355a3 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1559,12 +1559,6 @@ composite_resume(struct usb_gadget *gadget)
/*-------------------------------------------------------------------------*/
static struct usb_gadget_driver composite_driver = {
-#ifdef CONFIG_USB_GADGET_SUPERSPEED
- .speed = USB_SPEED_SUPER,
-#else
- .speed = USB_SPEED_HIGH,
-#endif
-
.unbind = composite_unbind,
.setup = composite_setup,
@@ -1609,8 +1603,7 @@ int usb_composite_probe(struct usb_composite_driver *driver,
driver->iProduct = driver->name;
composite_driver.function = (char *) driver->name;
composite_driver.driver.name = driver->name;
- composite_driver.speed = min((u8)composite_driver.speed,
- (u8)driver->max_speed);
+ composite_driver.speed = min(USB_SPEED_SUPER, driver->max_speed);
composite = driver;
composite_gadget_bind = bind;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index cf875be..61ed4ec 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3562,11 +3562,7 @@ static void fsg_resume(struct usb_gadget *gadget)
/*-------------------------------------------------------------------------*/
static struct usb_gadget_driver fsg_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
.speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif
.function = (char *) fsg_string_product,
.unbind = fsg_unbind,
.disconnect = fsg_disconnect,
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 1b24099..1869478 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -837,7 +837,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (value == 0)
data->state = STATE_EP_ENABLED;
break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_SPEED_HIGH:
/* fails if caller didn't provide that descriptor... */
ep->desc = &data->hs_desc;
@@ -845,7 +844,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (value == 0)
data->state = STATE_EP_ENABLED;
break;
-#endif
default:
DBG(data->dev, "unconnected, %s init abandoned\n",
data->name);
@@ -1015,9 +1013,8 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
if (dev->current_config) {
unsigned power;
- if (gadget_is_dualspeed(dev->gadget)
- && (dev->gadget->speed
- == USB_SPEED_HIGH))
+ if (gadget_is_dualspeed(dev->gadget) &&
+ (dev->gadget->speed == USB_SPEED_HIGH))
power = dev->hs_config->bMaxPower;
else
power = dev->config->bMaxPower;
@@ -1331,7 +1328,6 @@ static const struct file_operations ep0_io_operations = {
* Unrecognized ep0 requests may be handled in user space.
*/
-#ifdef CONFIG_USB_GADGET_DUALSPEED
static void make_qualifier (struct dev_data *dev)
{
struct usb_qualifier_descriptor qual;
@@ -1354,10 +1350,8 @@ static void make_qualifier (struct dev_data *dev)
memcpy (dev->rbuf, &qual, sizeof qual);
}
-#endif
-static int
-config_buf (struct dev_data *dev, u8 type, unsigned index)
+static int config_buf (struct dev_data *dev, u8 type, unsigned index)
{
int len;
int hs = 0;
@@ -1434,7 +1428,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
req->buf = dev->dev;
break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
if (!dev->hs_config)
break;
@@ -1444,7 +1437,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
break;
case USB_DT_OTHER_SPEED_CONFIG:
// FALLTHROUGH
-#endif
case USB_DT_CONFIG:
value = config_buf (dev,
w_value >> 8,
@@ -1773,11 +1765,7 @@ gadgetfs_suspend (struct usb_gadget *gadget)
}
static struct usb_gadget_driver gadgetfs_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
.speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif
.function = (char *) driver_desc,
.unbind = gadgetfs_unbind,
.setup = gadgetfs_setup,
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index a341dde..87f8d03 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -164,12 +164,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
#define QLEN qlen
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-#define DEVSPEED USB_SPEED_HIGH
-#else /* full speed (low speed doesn't do bulk) */
-#define DEVSPEED USB_SPEED_FULL
-#endif
-
/*-------------------------------------------------------------------------*/
#define xprintk(d, level, fmt, args...) \
@@ -288,8 +282,6 @@ static const struct usb_descriptor_header *fs_printer_function [11] = {
NULL
};
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
/*
* usb 2.0 devices need to expose both high speed and full speed
* descriptors, unless they only run at full speed.
@@ -326,14 +318,13 @@ static const struct usb_descriptor_header *hs_printer_function [11] = {
};
/* maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs))
-
-#else
-
-/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g, hs, fs) (((void)(g)), (fs))
-
-#endif /* !CONFIG_USB_GADGET_DUALSPEED */
+static inline struct usb_endpoint_descriptor *
+ep_desc(struct printer_dev *dev,
+ struct usb_endpoint_descriptor *hs,
+ struct usb_endpoint_descriptor *fs)
+{
+ return gadget_is_dualspeed(dev->gadget) ? hs : fs;
+}
/*-------------------------------------------------------------------------*/
@@ -897,11 +888,10 @@ set_printer_interface(struct printer_dev *dev)
{
int result = 0;
- dev->in_ep->desc = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc);
+ dev->in_ep->desc = ep_desc(dev, &hs_ep_in_desc, &fs_ep_in_desc);
dev->in_ep->driver_data = dev;
- dev->out_ep->desc = ep_desc(dev->gadget, &hs_ep_out_desc,
- &fs_ep_out_desc);
+ dev->out_ep->desc = ep_desc(dev, &hs_ep_out_desc, &fs_ep_out_desc);
dev->out_ep->driver_data = dev;
result = usb_ep_enable(dev->in_ep);
@@ -979,9 +969,7 @@ printer_set_config(struct printer_dev *dev, unsigned number)
switch (gadget->speed) {
case USB_SPEED_FULL: speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_SPEED_HIGH: speed = "high"; break;
-#endif
default: speed = "?"; break;
}
@@ -998,23 +986,15 @@ config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index,
{
int len;
const struct usb_descriptor_header **function;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
int hs = (speed == USB_SPEED_HIGH);
+ if (index >= device_desc.bNumConfigurations)
+ return -EINVAL;
+
if (type == USB_DT_OTHER_SPEED_CONFIG)
hs = !hs;
- if (hs) {
- function = hs_printer_function;
- } else {
- function = fs_printer_function;
- }
-#else
- function = fs_printer_function;
-#endif
-
- if (index >= device_desc.bNumConfigurations)
- return -EINVAL;
+ function = hs ? hs_printer_function : fs_printer_function;
/* for now, don't advertise srp-only devices */
if (!is_otg)
@@ -1156,9 +1136,8 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
value = min(wLength, (u16) sizeof device_desc);
memcpy(req->buf, &device_desc, value);
break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
/*
* assumes ep0 uses the same value for both
@@ -1172,10 +1151,9 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
break;
case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
break;
/* FALLTHROUGH */
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
case USB_DT_CONFIG:
value = config_buf(gadget->speed, req->buf,
wValue >> 8,
@@ -1460,11 +1438,9 @@ autoconf_fail:
goto autoconf_fail;
out_ep->driver_data = out_ep; /* claim */
-#ifdef CONFIG_USB_GADGET_DUALSPEED
/* assumes that all endpoints are dual-speed */
hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-#endif /* DUALSPEED */
usb_gadget_set_selfpowered(gadget);
@@ -1552,7 +1528,7 @@ fail:
/*-------------------------------------------------------------------------*/
static struct usb_gadget_driver printer_driver = {
- .speed = DEVSPEED,
+ .speed = USB_SPEED_HIGH,
.function = (char *) driver_desc,
.unbind = printer_unbind,
@@ -1570,8 +1546,7 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Craig Nadler");
MODULE_LICENSE("GPL");
-static int __init
-init(void)
+static int __init init(void)
{
int status;
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index dfed4c1..8642abb 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -92,17 +92,10 @@ struct eth_dev {
#define DEFAULT_QLEN 2 /* double buffering by default */
-
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
static unsigned qmult = 5;
module_param(qmult, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");
-#else /* full speed (low speed doesn't do bulk) */
-#define qmult 1
-#endif
-
/* for dual-speed hardware, use deeper queues at high/super speed */
static inline int qlen(struct usb_gadget *gadget)
{
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists