[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.3-vdr3-00280-gc9c8f9f (root@highlander) (gcc version 4.6.1 (Debian 4.6.1-7) ) #1 SMP PREEMPT Fri Aug 19 14:33:09 CEST 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.3-vdr3-00280-gc9c8f9f root=UUID=c900708e-25b3-4743-9c67-2b03a62f3d73 ro quiet fastboot [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff90000 (usable) [ 0.000000] BIOS-e820: 000000005ff90000 - 000000005ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000005ff9e000 - 000000005ffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005ffd0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/AT3N7A-I, BIOS 0216 10/12/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x5ff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 080000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000005ff90000 [ 0.000000] 0000000000 - 005fe00000 page 2M [ 0.000000] 005fe00000 - 005ff90000 page 4k [ 0.000000] kernel direct mapping tables up to 5ff90000 @ 5ff8c000-5ff90000 [ 0.000000] RAMDISK: 377f0000 - 37bf0000 [ 0.000000] ACPI: RSDP 00000000000fbde0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000005ff90100 0005C (v01 101209 XSDT0912 20091012 MSFT 00000097) [ 0.000000] ACPI: FACP 000000005ff90290 000F4 (v03 101209 FACP0912 20091012 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000005ff904a0 0997C (v01 A1417 A1417000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 000000005ff9e000 00040 [ 0.000000] ACPI: APIC 000000005ff90390 00080 (v01 101209 APIC0912 20091012 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000005ff90410 0003C (v01 101209 OEMMCFG 20091012 MSFT 00000097) [ 0.000000] ACPI: WDRT 000000005ff90450 00047 (v01 101209 NV-WDRT 20091012 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000005ff9e040 0007A (v01 101209 OEMB0912 20091012 MSFT 00000097) [ 0.000000] ACPI: HPET 000000005ff99e20 00038 (v01 101209 OEMHPET0 20091012 MSFT 00000097) [ 0.000000] ACPI: NVHD 000000005ff9e0c0 00284 (v01 101209 NVHDCP 20091012 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00015fffff] PMD -> [ffff88005de00000-ffff88005f3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005ff90 [ 0.000000] On node 0 totalpages: 392991 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5319 pages used for memmap [ 0.000000] DMA32 zone: 383689 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88005fc00000 s70016 r8192 d24192 u524288 [ 0.000000] pcpu-alloc: s70016 r8192 d24192 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387611 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.3-vdr3-00280-gc9c8f9f root=UUID=c900708e-25b3-4743-9c67-2b03a62f3d73 ro quiet fastboot [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1534200k/1572416k available (4592k kernel code, 452k absent, 37764k reserved, 1907k data, 452k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 8200 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1599.874 MHz processor. [ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 3201.07 BogoMIPS (lpj=5332913) [ 0.003351] pid_max: default: 32768 minimum: 301 [ 0.003440] Mount-cache hash table entries: 256 [ 0.003697] Initializing cgroup subsys cpuacct [ 0.003711] Initializing cgroup subsys freezer [ 0.003716] Initializing cgroup subsys blkio [ 0.003753] Disabled fast string operations [ 0.003761] CPU: Physical Processor ID: 0 [ 0.003764] CPU: Processor Core ID: 0 [ 0.003768] mce: CPU supports 5 MCE banks [ 0.003781] CPU0: Thermal monitoring enabled (TM2) [ 0.003788] using mwait in idle threads. [ 0.003823] ACPI: Core revision 20110413 [ 0.016665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.049709] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.049997] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.049997] ... version: 3 [ 0.049997] ... bit width: 40 [ 0.049997] ... generic registers: 2 [ 0.049997] ... value mask: 000000ffffffffff [ 0.049997] ... max period: 000000007fffffff [ 0.049997] ... fixed-purpose events: 3 [ 0.049997] ... event mask: 0000000700000003 [ 0.066700] Booting Node 0, Processors #1 [ 0.066708] smpboot cpu 1: start_ip = 9a000 [ 0.006666] Disabled fast string operations [ 0.170030] #2 [ 0.170035] smpboot cpu 2: start_ip = 9a000 [ 0.006666] Disabled fast string operations [ 0.273371] #3 Ok. [ 0.273376] smpboot cpu 3: start_ip = 9a000 [ 0.006666] Disabled fast string operations [ 0.369997] Brought up 4 CPUs [ 0.370005] Total of 4 processors activated (12804.96 BogoMIPS). [ 0.371280] PM: Registering ACPI NVS region at 5ff9e000 (204800 bytes) [ 0.371280] Time: 12:48:41 Date: 08/19/11 [ 0.371280] NET: Registered protocol family 16 [ 0.373360] ACPI: bus type pci registered [ 0.373385] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000) [ 0.373385] PCI: not using MMCONFIG [ 0.373385] PCI: Using configuration type 1 for base access [ 0.387056] bio: create slab at 0 [ 0.392893] ACPI: EC: Look up EC in DSDT [ 0.396932] ACPI: Executed 1 blocks of module-level executable AML code [ 0.405909] ACPI: Interpreter enabled [ 0.405919] ACPI: (supports S0 S1 S3 S4 S5) [ 0.405967] ACPI: Using IOAPIC for interrupt routing [ 0.406042] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000) [ 0.408829] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources [ 0.446802] ACPI: No dock devices found. [ 0.446812] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.447411] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.447488] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.447488] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.447488] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.447488] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.447488] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfbffffff] [ 0.447488] pci_root PNP0A03:00: host bridge window [mem 0xfe000000-0xfebfffff] [ 0.447488] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600 [ 0.447488] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500 [ 0.447488] pci 0000:00:03.0: [10de:0aad] type 0 class 0x000601 [ 0.447488] pci 0000:00:03.0: reg 10: [io 0x4f00-0x4fff] [ 0.447542] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500 [ 0.447641] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05 [ 0.447662] pci 0000:00:03.2: reg 10: [io 0x4900-0x493f] [ 0.447692] pci 0000:00:03.2: reg 20: [io 0x4d00-0x4d3f] [ 0.447703] pci 0000:00:03.2: reg 24: [io 0x4e00-0x4e3f] [ 0.447738] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.447748] pci 0000:00:03.2: PME# disabled [ 0.447775] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500 [ 0.447938] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40 [ 0.447963] pci 0000:00:03.5: reg 10: [mem 0xf5f80000-0xf5ffffff] [ 0.448101] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03 [ 0.448119] pci 0000:00:04.0: reg 10: [mem 0xf5f7f000-0xf5f7ffff] [ 0.448175] pci 0000:00:04.0: supports D1 D2 [ 0.448180] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448188] pci 0000:00:04.0: PME# disabled [ 0.448211] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03 [ 0.448231] pci 0000:00:04.1: reg 10: [mem 0xf5f7ec00-0xf5f7ecff] [ 0.448293] pci 0000:00:04.1: supports D1 D2 [ 0.448298] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448305] pci 0000:00:04.1: PME# disabled [ 0.448340] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03 [ 0.448358] pci 0000:00:06.0: reg 10: [mem 0xf5f7d000-0xf5f7dfff] [ 0.448414] pci 0000:00:06.0: supports D1 D2 [ 0.448419] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448426] pci 0000:00:06.0: PME# disabled [ 0.448453] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03 [ 0.448474] pci 0000:00:06.1: reg 10: [mem 0xf5f7e800-0xf5f7e8ff] [ 0.448537] pci 0000:00:06.1: supports D1 D2 [ 0.448542] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448549] pci 0000:00:06.1: PME# disabled [ 0.448582] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403 [ 0.448600] pci 0000:00:08.0: reg 10: [mem 0xf5f78000-0xf5f7bfff] [ 0.448657] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.448664] pci 0000:00:08.0: PME# disabled [ 0.448685] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604 [ 0.448747] pci 0000:00:0b.0: [10de:0ab4] type 0 class 0x000101 [ 0.448766] pci 0000:00:0b.0: reg 10: [io 0xc080-0xc087] [ 0.448777] pci 0000:00:0b.0: reg 14: [io 0xc000-0xc003] [ 0.448788] pci 0000:00:0b.0: reg 18: [io 0xbc00-0xbc07] [ 0.448798] pci 0000:00:0b.0: reg 1c: [io 0xb880-0xb883] [ 0.448809] pci 0000:00:0b.0: reg 20: [io 0xb800-0xb80f] [ 0.448820] pci 0000:00:0b.0: reg 24: [mem 0xf5f76000-0xf5f77fff] [ 0.448876] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604 [ 0.448922] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448929] pci 0000:00:10.0: PME# disabled [ 0.448993] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604 [ 0.450130] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.450142] pci 0000:00:15.0: PME# disabled [ 0.450247] pci 0000:01:05.0: [14f1:8800] type 0 class 0x000400 [ 0.450272] pci 0000:01:05.0: reg 10: [mem 0xf9000000-0xf9ffffff] [ 0.450370] pci 0000:01:05.1: [14f1:8801] type 0 class 0x000480 [ 0.450391] pci 0000:01:05.1: reg 10: [mem 0xf8000000-0xf8ffffff] [ 0.450484] pci 0000:01:05.2: [14f1:8802] type 0 class 0x000480 [ 0.450506] pci 0000:01:05.2: reg 10: [mem 0xf7000000-0xf7ffffff] [ 0.450597] pci 0000:01:05.4: [14f1:8804] type 0 class 0x000480 [ 0.450617] pci 0000:01:05.4: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.450730] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.450739] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.450746] pci 0000:00:09.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.450754] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.450760] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.450767] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.450773] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.450779] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.450786] pci 0000:00:09.0: bridge window [mem 0x80000000-0xfbffffff] (subtractive decode) [ 0.450792] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode) [ 0.450842] pci 0000:02:00.0: [10de:087d] type 0 class 0x000300 [ 0.450863] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.450881] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.450898] pci 0000:02:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.450911] pci 0000:02:00.0: reg 24: [io 0xdc00-0xdc7f] [ 0.450924] pci 0000:02:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref] [ 0.450988] pci 0000:00:10.0: PCI bridge to [bus 02-02] [ 0.450996] pci 0000:00:10.0: bridge window [io 0xd000-0xdfff] [ 0.451003] pci 0000:00:10.0: bridge window [mem 0xfa000000-0xfbefffff] [ 0.451012] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf3ffffff 64bit pref] [ 0.451181] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 0.451202] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.451232] pci 0000:03:00.0: reg 18: [mem 0xf4fff000-0xf4ffffff 64bit pref] [ 0.451253] pci 0000:03:00.0: reg 20: [mem 0xf4ff8000-0xf4ffbfff 64bit pref] [ 0.451269] pci 0000:03:00.0: reg 30: [mem 0xfbff0000-0xfbffffff pref] [ 0.451311] pci 0000:03:00.0: supports D1 D2 [ 0.451316] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.451324] pci 0000:03:00.0: PME# disabled [ 0.456672] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.456691] pci 0000:00:15.0: bridge window [io 0xe000-0xefff] [ 0.456703] pci 0000:00:15.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.456722] pci 0000:00:15.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref] [ 0.456753] pci_bus 0000:00: on NUMA node 0 [ 0.456764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.457048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT] [ 0.457148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.457240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.457619] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.458085] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.458091] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.473602] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *15 [ 0.473855] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.474105] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.474354] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.474604] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled. [ 0.474857] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.475115] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.476811] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.477064] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.477321] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.477572] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.477822] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.478073] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. [ 0.478324] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.478574] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.478824] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.479082] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *10 [ 0.479332] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.479583] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.479834] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.480112] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.480364] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.480616] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.480867] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.481118] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.481369] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.481621] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.481873] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.482125] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.482377] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.482631] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.482889] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.483154] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14 [ 0.483451] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.483725] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.483985] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9 [ 0.484242] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *11 [ 0.484500] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *9 [ 0.484757] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15 [ 0.485023] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.485313] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.485573] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.485830] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11 [ 0.486091] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled. [ 0.486345] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled. [ 0.486598] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled. [ 0.486883] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10 [ 0.487146] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *0, disabled. [ 0.487400] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled. [ 0.487654] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled. [ 0.487729] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.487729] vgaarb: loaded [ 0.487729] vgaarb: bridge control possible 0000:02:00.0 [ 0.487729] SCSI subsystem initialized [ 0.487729] libata version 3.00 loaded. [ 0.487729] usbcore: registered new interface driver usbfs [ 0.487729] usbcore: registered new interface driver hub [ 0.487729] usbcore: registered new device driver usb [ 0.490024] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.490024] PCI: Using ACPI for IRQ routing [ 0.490994] PCI: pci_cache_line_size set to 64 bytes [ 0.491137] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.491144] reserve RAM buffer: 000000005ff90000 - 000000005fffffff [ 0.491191] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.491191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.491191] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.506692] Switching to clocksource hpet [ 0.506851] pnp: PnP ACPI init [ 0.506875] ACPI: bus type pnp registered [ 0.507189] pnp 00:00: [bus 00-ff] [ 0.507196] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.507202] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.507207] pnp 00:00: [io 0x0d00-0xffff window] [ 0.507213] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.507219] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.507224] pnp 00:00: [mem 0x80000000-0xfbffffff window] [ 0.507230] pnp 00:00: [mem 0xfe000000-0xfebfffff window] [ 0.507495] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.507591] pnp 00:01: [dma 4] [ 0.507597] pnp 00:01: [io 0x0000-0x000f] [ 0.507602] pnp 00:01: [io 0x0081-0x0083] [ 0.507606] pnp 00:01: [io 0x0087] [ 0.507611] pnp 00:01: [io 0x0089-0x008b] [ 0.507615] pnp 00:01: [io 0x008f] [ 0.507620] pnp 00:01: [io 0x00c0-0x00df] [ 0.507773] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.507809] pnp 00:02: [io 0x0061] [ 0.507953] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.507983] pnp 00:03: [io 0x00f0-0x00ff] [ 0.508003] pnp 00:03: [irq 13] [ 0.508149] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.509078] pnp 00:04: [mem 0x000d0000-0x000d3fff window] [ 0.509085] pnp 00:04: [mem 0x000d4000-0x000d7fff window] [ 0.509090] pnp 00:04: [mem 0x000de000-0x000dffff window] [ 0.509096] pnp 00:04: [io 0x0010-0x001f] [ 0.509105] pnp 00:04: [io 0x0022-0x003f] [ 0.509109] pnp 00:04: [io 0x0044-0x004d] [ 0.509114] pnp 00:04: [io 0x0050-0x005f] [ 0.509119] pnp 00:04: [io 0x0062-0x0063] [ 0.509123] pnp 00:04: [io 0x0065-0x006f] [ 0.509128] pnp 00:04: [io 0x0072-0x007f] [ 0.509133] pnp 00:04: [io 0x0080] [ 0.509137] pnp 00:04: [io 0x0084-0x0086] [ 0.509142] pnp 00:04: [io 0x0088] [ 0.509146] pnp 00:04: [io 0x008c-0x008e] [ 0.509151] pnp 00:04: [io 0x0090-0x009f] [ 0.509155] pnp 00:04: [io 0x00a2-0x00bf] [ 0.509160] pnp 00:04: [io 0x00e0-0x00ef] [ 0.509165] pnp 00:04: [io 0x04d0-0x04d1] [ 0.509170] pnp 00:04: [io 0x0800-0x080f] [ 0.509175] pnp 00:04: [io 0x4000-0x407f] [ 0.509179] pnp 00:04: [io 0x4080-0x40ff] [ 0.509184] pnp 00:04: [io 0x4400-0x447f] [ 0.509189] pnp 00:04: [io 0x4480-0x44ff] [ 0.509193] pnp 00:04: [io 0x4800-0x487f] [ 0.509198] pnp 00:04: [io 0x4880-0x48ff] [ 0.509204] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.509209] pnp 00:04: [mem 0xfefe2000-0xfefe3fff] [ 0.509214] pnp 00:04: [mem 0xfefe1000-0xfefe1fff] [ 0.509219] pnp 00:04: [mem 0xfee01000-0xfeefffff] [ 0.509491] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.509499] system 00:04: [io 0x0800-0x080f] has been reserved [ 0.509506] system 00:04: [io 0x4000-0x407f] has been reserved [ 0.509512] system 00:04: [io 0x4080-0x40ff] has been reserved [ 0.509518] system 00:04: [io 0x4400-0x447f] has been reserved [ 0.509525] system 00:04: [io 0x4480-0x44ff] has been reserved [ 0.509531] system 00:04: [io 0x4800-0x487f] has been reserved [ 0.509537] system 00:04: [io 0x4880-0x48ff] has been reserved [ 0.509545] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.509552] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.509559] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved [ 0.509566] system 00:04: [mem 0xfefe2000-0xfefe3fff] has been reserved [ 0.509572] system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.509579] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.509588] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.509690] Switched to NOHz mode on CPU #0 [ 0.509788] Switched to NOHz mode on CPU #2 [ 0.509807] Switched to NOHz mode on CPU #1 [ 0.509852] Switched to NOHz mode on CPU #3 [ 0.509968] pnp 00:05: [mem 0xfed00000-0xfed00fff] [ 0.509976] pnp 00:05: [irq 2 disabled] [ 0.509993] pnp 00:05: [irq 8] [ 0.510209] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.510282] pnp 00:06: [io 0x0070-0x0071] [ 0.510450] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.511088] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.511095] pnp 00:07: [io 0x0c00-0x0c0f] [ 0.511100] pnp 00:07: [io 0x0290-0x029f] [ 0.511105] pnp 00:07: [io 0x0a20-0x0a2f] [ 0.511109] pnp 00:07: [io 0x0a30-0x0a3f] [ 0.511348] system 00:07: [io 0x0c00-0x0c0f] has been reserved [ 0.511356] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.511362] system 00:07: [io 0x0a20-0x0a2f] has been reserved [ 0.511368] system 00:07: [io 0x0a30-0x0a3f] has been reserved [ 0.511376] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.511619] pnp 00:08: [io 0x0060] [ 0.511624] pnp 00:08: [io 0x0064] [ 0.511630] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 0.511635] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 0.511862] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.511871] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.511879] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.512030] pnp 00:09: [mem 0xfc000000-0xfdffffff] [ 0.512244] system 00:09: [mem 0xfc000000-0xfdffffff] has been reserved [ 0.512253] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.512754] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.512761] pnp 00:0a: [mem 0x000c0000-0x000cffff] [ 0.512766] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.512777] pnp 00:0a: [mem 0x00100000-0x7fffffff] [ 0.512782] pnp 00:0a: [mem 0xfec00000-0xffffffff] [ 0.513049] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.513058] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.513065] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.513071] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.513078] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.513086] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.514925] pnp: PnP ACPI: found 11 devices [ 0.514930] ACPI: ACPI bus type pnp unregistered [ 0.531172] PCI: max bus depth: 1 pci_try_num: 2 [ 0.531234] pci 0000:00:09.0: PCI bridge to [bus 01-01] [ 0.531240] pci 0000:00:09.0: bridge window [io disabled] [ 0.531249] pci 0000:00:09.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.531256] pci 0000:00:09.0: bridge window [mem pref disabled] [ 0.531265] pci 0000:00:10.0: PCI bridge to [bus 02-02] [ 0.531272] pci 0000:00:10.0: bridge window [io 0xd000-0xdfff] [ 0.531279] pci 0000:00:10.0: bridge window [mem 0xfa000000-0xfbefffff] [ 0.531287] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf3ffffff 64bit pref] [ 0.531296] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.531304] pci 0000:00:15.0: bridge window [io 0xe000-0xefff] [ 0.531319] pci 0000:00:15.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.531331] pci 0000:00:15.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref] [ 0.531360] pci 0000:00:09.0: setting latency timer to 64 [ 0.531372] pci 0000:00:10.0: setting latency timer to 64 [ 0.531825] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 23 [ 0.531856] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 23 (level, low) -> IRQ 23 [ 0.531870] pci 0000:00:15.0: setting latency timer to 64 [ 0.531881] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.531887] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.531893] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.531899] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.531905] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfbffffff] [ 0.531911] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff] [ 0.531917] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff] [ 0.531923] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.531928] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.531934] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.531940] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.531946] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfbffffff] [ 0.531952] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff] [ 0.531958] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.531963] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbefffff] [ 0.531970] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf3ffffff 64bit pref] [ 0.531976] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.531981] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.531988] pci_bus 0000:03: resource 2 [mem 0xf4f00000-0xf4ffffff 64bit pref] [ 0.532073] NET: Registered protocol family 2 [ 0.532185] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.533221] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.536452] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.537283] TCP: Hash tables configured (established 262144 bind 65536) [ 0.537290] TCP reno registered [ 0.537303] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.537335] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.537585] NET: Registered protocol family 1 [ 0.706822] pci 0000:02:00.0: Boot video device [ 0.706834] PCI: CLS 64 bytes, default 64 [ 0.706946] Trying to unpack rootfs image as initramfs... [ 0.883419] Freeing initrd memory: 4096k freed [ 0.891701] microcode: CPU0 sig=0x106c2, pf=0x8, revision=0x219 [ 0.891726] microcode: CPU1 sig=0x106c2, pf=0x8, revision=0x219 [ 0.891747] microcode: CPU2 sig=0x106c2, pf=0x8, revision=0x219 [ 0.891773] microcode: CPU3 sig=0x106c2, pf=0x8, revision=0x219 [ 0.891922] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.899819] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.927206] Btrfs loaded [ 0.927225] msgmni has been set to 3004 [ 0.928592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.928684] io scheduler noop registered [ 0.928690] io scheduler deadline registered [ 0.928903] io scheduler cfq registered (default) [ 0.929835] intel_idle: MWAIT substates: 0x10 [ 0.929863] intel_idle: v0.4 model 0x1C [ 0.929867] intel_idle: lapic_timer_reliable_states 0x2 [ 0.930790] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.930802] ACPI: Power Button [PWRB] [ 0.931018] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.931028] ACPI: Power Button [PWRF] [ 0.931469] ACPI: acpi_idle yielding to intel_idle [ 0.944692] brd: module loaded [ 0.947677] loop: module loaded [ 0.948368] ahci 0000:00:0b.0: version 3.0 [ 0.948835] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 0.948869] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 0.948954] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X [ 0.948966] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP [ 0.949066] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl IDE mode [ 0.949075] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs [ 0.949083] ahci 0000:00:0b.0: setting latency timer to 64 [ 0.952574] scsi0 : ahci [ 0.953073] scsi1 : ahci [ 0.953497] scsi2 : ahci [ 0.953898] scsi3 : ahci [ 0.954290] scsi4 : ahci [ 0.954669] scsi5 : ahci [ 0.955209] ata1: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76100 irq 40 [ 0.955217] ata2: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76180 irq 40 [ 0.955223] ata3: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76200 irq 40 [ 0.955229] ata4: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76280 irq 40 [ 0.955234] ata5: DUMMY [ 0.955237] ata6: DUMMY [ 0.955902] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.956379] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19 [ 0.956411] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19 [ 0.956472] r8169 0000:03:00.0: setting latency timer to 64 [ 0.956535] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 0.957339] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000000c000, 90:e6:ba:cc:ba:19, XID 083000c0 IRQ 41 [ 0.957541] console [netcon0] enabled [ 0.957545] netconsole: network logging started [ 0.957572] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.957577] ohci_hcd: block sizes: ed 80 td 96 [ 0.958035] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 0.958066] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 0.958098] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.958105] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.958152] drivers/usb/core/inode.c: creating file 'devices' [ 0.958176] drivers/usb/core/inode.c: creating file '001' [ 0.958186] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 0.958207] ohci_hcd 0000:00:04.0: created debug files [ 0.958212] ohci_hcd 0000:00:04.0: supports USB remote wakeup [ 0.958249] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf5f7f000 [ 1.012056] ohci_hcd 0000:00:04.0: OHCI controller state [ 1.012066] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers [ 1.012074] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 1.012080] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0 [ 1.012087] ohci_hcd 0000:00:04.0: intrstatus 0x00000044 RHSC SF [ 1.012094] ohci_hcd 0000:00:04.0: intrenable 0x8000001a MIE UE RD WDH [ 1.012102] ohci_hcd 0000:00:04.0: hcca frame #0003 [ 1.012109] ohci_hcd 0000:00:04.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6) [ 1.012116] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.012123] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE [ 1.012130] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS [ 1.012138] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS [ 1.012145] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS [ 1.012153] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00010101 CSC PPS CCS [ 1.012161] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00010301 CSC LSDA PPS CCS [ 1.012169] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00010101 CSC PPS CCS [ 1.012200] usb usb1: default language 0x0409 [ 1.012215] usb usb1: udev 1, busnum 1, minor = 0 [ 1.012220] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.012226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.012232] usb usb1: Product: OHCI Host Controller [ 1.012237] usb usb1: Manufacturer: Linux 3.0.3-vdr3-00280-gc9c8f9f ohci_hcd [ 1.012242] usb usb1: SerialNumber: 0000:00:04.0 [ 1.012526] usb usb1: usb_probe_device [ 1.012534] usb usb1: configuration #1 chosen from 1 choice [ 1.012553] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.012731] hub 1-0:1.0: usb_probe_interface [ 1.012737] hub 1-0:1.0: usb_probe_interface - got id [ 1.012742] hub 1-0:1.0: USB hub found [ 1.012754] hub 1-0:1.0: 6 ports detected [ 1.012759] hub 1-0:1.0: standalone hub [ 1.012763] hub 1-0:1.0: no power switching (usb 1.0) [ 1.012767] hub 1-0:1.0: no over-current protection [ 1.012772] hub 1-0:1.0: power on to power good time: 2ms [ 1.012781] hub 1-0:1.0: local power source is good [ 1.012787] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.012826] drivers/usb/core/inode.c: creating file '001' [ 1.013396] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20 [ 1.013429] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20 [ 1.013466] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 1.013473] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.013488] drivers/usb/core/inode.c: creating file '002' [ 1.013501] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2 [ 1.013524] ohci_hcd 0000:00:06.0: created debug files [ 1.013529] ohci_hcd 0000:00:06.0: supports USB remote wakeup [ 1.013567] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf5f7d000 [ 1.068725] ohci_hcd 0000:00:06.0: OHCI controller state [ 1.068733] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers [ 1.068741] ohci_hcd 0000:00:06.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 1.068748] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0 [ 1.068754] ohci_hcd 0000:00:06.0: intrstatus 0x00000004 SF [ 1.068761] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.068769] ohci_hcd 0000:00:06.0: hcca frame #0003 [ 1.068777] ohci_hcd 0000:00:06.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6) [ 1.068784] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.068790] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE [ 1.068798] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS [ 1.068805] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS [ 1.068813] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS [ 1.068821] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS [ 1.068828] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS [ 1.068836] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS [ 1.068865] usb usb2: default language 0x0409 [ 1.068880] usb usb2: udev 1, busnum 2, minor = 128 [ 1.068886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.068892] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.068897] usb usb2: Product: OHCI Host Controller [ 1.068902] usb usb2: Manufacturer: Linux 3.0.3-vdr3-00280-gc9c8f9f ohci_hcd [ 1.068907] usb usb2: SerialNumber: 0000:00:06.0 [ 1.069174] usb usb2: usb_probe_device [ 1.069182] usb usb2: configuration #1 chosen from 1 choice [ 1.069202] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.069369] hub 2-0:1.0: usb_probe_interface [ 1.069375] hub 2-0:1.0: usb_probe_interface - got id [ 1.069380] hub 2-0:1.0: USB hub found [ 1.069392] hub 2-0:1.0: 6 ports detected [ 1.069396] hub 2-0:1.0: standalone hub [ 1.069400] hub 2-0:1.0: no power switching (usb 1.0) [ 1.069405] hub 2-0:1.0: no over-current protection [ 1.069409] hub 2-0:1.0: power on to power good time: 2ms [ 1.069419] hub 2-0:1.0: local power source is good [ 1.069424] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.069467] drivers/usb/core/inode.c: creating file '001' [ 1.069696] uhci_hcd: USB Universal Host Controller Interface driver [ 1.070103] usbcore: registered new interface driver libusual [ 1.070670] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.071283] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.071348] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.071731] mousedev: PS/2 mouse device common for all mice [ 1.072227] rtc_cmos 00:06: RTC can wake from S4 [ 1.072581] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.072646] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.073417] coretemp coretemp.0: Unable to read TjMax from CPU. [ 1.073457] coretemp coretemp.0: Unable to read TjMax from CPU. [ 1.074670] cpuidle: using governor ladder [ 1.076775] cpuidle: using governor menu [ 1.076781] EFI Variables Facility v0.08 2004-May-17 [ 1.079107] usbcore: registered new interface driver usbhid [ 1.079113] usbhid: USB HID core driver [ 1.079434] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 1.079445] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 1.079870] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 [ 1.079882] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23 [ 1.079889] hda_intel: Disabling MSI [ 1.079965] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 1.110070] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS [ 1.110080] hub 1-0:1.0: port 4: status 0101 change 0001 [ 1.110091] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [4] = 0x00010301 CSC LSDA PPS CCS [ 1.110098] hub 1-0:1.0: port 5: status 0301 change 0001 [ 1.110108] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00010101 CSC PPS CCS [ 1.110115] hub 1-0:1.0: port 6: status 0101 change 0001 [ 1.166765] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.210057] hub 1-0:1.0: state 7 ports 6 chg 0070 evt 0000 [ 1.210091] hub 1-0:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.273387] ata3: SATA link down (SStatus 0 SControl 300) [ 1.273432] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.273462] ata2: SATA link down (SStatus 0 SControl 300) [ 1.273493] ata4: SATA link down (SStatus 0 SControl 300) [ 1.276720] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS [ 1.279820] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 1.279827] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.286260] ata1.00: configured for UDMA/133 [ 1.286600] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 1.287346] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.287545] sd 0:0:0:0: [sda] Write Protect is off [ 1.287554] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.287641] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287729] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.322060] sda: sda1 sda2 < sda5 sda6 sda7 > [ 1.323514] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.330056] usb 1-4: new full speed USB device number 2 using ohci_hcd [ 1.406729] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS [ 1.495089] usb 1-4: udev 2, busnum 1, minor = 1 [ 1.495095] usb 1-4: New USB device found, idVendor=0a12, idProduct=0001 [ 1.495101] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.495397] usb 1-4: usb_probe_device [ 1.495406] usb 1-4: configuration #1 chosen from 1 choice [ 1.498089] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 1.498334] usb 1-4: adding 1-4:1.1 (config #1, interface 1) [ 1.498543] drivers/usb/core/inode.c: creating file '002' [ 1.498593] hub 1-0:1.0: port 5, status 0301, change 0000, 1.5 Mb/s [ 1.563391] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.616716] usb 1-5: new low speed USB device number 3 using ohci_hcd [ 1.683381] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.765081] usb 1-5: skipped 1 descriptor after interface [ 1.765087] usb 1-5: skipped 1 descriptor after interface [ 1.768078] usb 1-5: default language 0x0409 [ 1.777080] usb 1-5: udev 3, busnum 1, minor = 2 [ 1.777086] usb 1-5: New USB device found, idVendor=0a81, idProduct=0205 [ 1.777092] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.777098] usb 1-5: Product: PS2 to USB Converter [ 1.777102] usb 1-5: Manufacturer: CHESEN [ 1.777343] usb 1-5: usb_probe_device [ 1.777350] usb 1-5: configuration #1 chosen from 1 choice [ 1.785081] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 1.785299] usbhid 1-5:1.0: usb_probe_interface [ 1.785305] usbhid 1-5:1.0: usb_probe_interface - got id [ 1.794607] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.0/input/input2 [ 1.794993] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:04.0-5/input0 [ 1.795028] usb 1-5: adding 1-5:1.1 (config #1, interface 1) [ 1.795230] usbhid 1-5:1.1: usb_probe_interface [ 1.795237] usbhid 1-5:1.1: usb_probe_interface - got id [ 1.806661] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.1/input/input3 [ 1.807274] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:04.0-5/input1 [ 1.807310] drivers/usb/core/inode.c: creating file '003' [ 1.807360] hub 1-0:1.0: port 6, status 0101, change 0000, 12 Mb/s [ 1.873389] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00100103 PRSC PPS PES CCS [ 1.890056] Refined TSC clocksource calibration: 1599.992 MHz. [ 1.890067] Switching to clocksource tsc [ 1.926707] usb 1-6: new full speed USB device number 4 using ohci_hcd [ 1.961400] ALSA device list: [ 1.961407] #0: HDA NVidia at 0xf5f78000 irq 23 [ 1.961923] TCP cubic registered [ 1.961928] Initializing XFRM netlink socket [ 1.962858] NET: Registered protocol family 10 [ 1.964105] IPv6 over IPv4 tunneling driver [ 1.965296] NET: Registered protocol family 17 [ 1.965316] Registering the dns_resolver key type [ 1.965829] PM: Hibernation image not present or could not be loaded. [ 1.972726] Magic number: 7:499:835 [ 1.972965] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.972970] EDD information not available. [ 1.973292] Freeing unused kernel memory: 452k freed [ 1.993439] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00100103 PRSC PPS PES CCS [ 2.071089] usb 1-6: udev 4, busnum 1, minor = 3 [ 2.071097] usb 1-6: New USB device found, idVendor=0cf3, idProduct=3000 [ 2.071104] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.071434] usb 1-6: usb_probe_device [ 2.071443] usb 1-6: configuration #1 chosen from 1 choice [ 2.074107] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 2.074416] drivers/usb/core/inode.c: creating file '004' [ 2.074489] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 2.096718] ohci_hcd 0000:00:06.0: auto-stop root hub [ 2.141839] udevd[898]: starting version 172 [ 2.274148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.274157] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.274167] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 2.274951] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 2.274971] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 2.275034] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 2.275043] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 2.275074] drivers/usb/core/inode.c: creating file '003' [ 2.275092] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3 [ 2.275113] ehci_hcd 0000:00:04.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6 [ 2.275126] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0 [ 2.275132] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park [ 2.275162] ehci_hcd 0000:00:04.1: park 0 [ 2.275173] ehci_hcd 0000:00:04.1: debug port 1 [ 2.275184] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.275197] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 2.275203] ehci_hcd 0000:00:04.1: supports USB remote wakeup [ 2.275251] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf5f7ec00 [ 2.275262] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.275273] ehci_hcd 0000:00:04.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.275345] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0070 [ 2.275365] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [3] = 0x00030100 PESC CSC PPS [ 2.275388] hub 1-0:1.0: port 4, status 0100, change 0003, 12 Mb/s [ 2.275399] usb 1-4: USB disconnect, device number 2 [ 2.275406] usb 1-4: unregistering device [ 2.275414] usb 1-4: unregistering interface 1-4:1.0 [ 2.279369] usb 1-4: unregistering interface 1-4:1.1 [ 2.279725] usb 1-4: usb_disable_device nuking all URBs [ 2.283544] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 2.283737] usb usb3: default language 0x0409 [ 2.283765] usb usb3: udev 1, busnum 3, minor = 256 [ 2.283773] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.283781] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.283789] usb usb3: Product: EHCI Host Controller [ 2.283797] usb usb3: Manufacturer: Linux 3.0.3-vdr3-00280-gc9c8f9f ehci_hcd [ 2.283804] usb usb3: SerialNumber: 0000:00:04.1 [ 2.289535] usb usb3: usb_probe_device [ 2.289550] usb usb3: configuration #1 chosen from 1 choice [ 2.289586] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.289833] hub 3-0:1.0: usb_probe_interface [ 2.289842] hub 3-0:1.0: usb_probe_interface - got id [ 2.289851] hub 3-0:1.0: USB hub found [ 2.289872] hub 3-0:1.0: 6 ports detected [ 2.289880] hub 3-0:1.0: standalone hub [ 2.289886] hub 3-0:1.0: no power switching (usb 1.0) [ 2.289892] hub 3-0:1.0: individual port over-current protection [ 2.289899] hub 3-0:1.0: power on to power good time: 20ms [ 2.289917] hub 3-0:1.0: local power source is good [ 2.289925] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.290035] drivers/usb/core/inode.c: creating file '001' [ 2.290116] ehci_hcd 0000:00:04.1: HS companion for 0000:00:04.0 [ 2.290880] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 2.290899] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 2.290954] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 2.290965] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 2.290994] drivers/usb/core/inode.c: creating file '004' [ 2.291017] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 4 [ 2.291045] ehci_hcd 0000:00:06.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6 [ 2.291058] ehci_hcd 0000:00:06.1: reset portroute 0 0 0 0 0 0 [ 2.291065] ehci_hcd 0000:00:06.1: reset hcc_params a086 caching frame 256/512/1024 park [ 2.291105] ehci_hcd 0000:00:06.1: park 0 [ 2.291121] ehci_hcd 0000:00:06.1: debug port 1 [ 2.291136] ehci_hcd 0000:00:06.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.291153] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported [ 2.291162] ehci_hcd 0000:00:06.1: supports USB remote wakeup [ 2.291191] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf5f7e800 [ 2.291205] ehci_hcd 0000:00:06.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.291220] ehci_hcd 0000:00:06.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.298080] ohci_hcd 0000:00:04.0: urb ffff88005d8ed840 path 5 ep1in 5e160000 cc 5 --> status -62 [ 2.299072] ohci_hcd 0000:00:04.0: urb ffff88005d8e0540 path 5 ep2in 5e160000 cc 5 --> status -62 [ 2.300088] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 2.300147] usb usb4: default language 0x0409 [ 2.300173] usb usb4: udev 1, busnum 4, minor = 384 [ 2.300181] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.300189] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.300197] usb usb4: Product: EHCI Host Controller [ 2.300204] usb usb4: Manufacturer: Linux 3.0.3-vdr3-00280-gc9c8f9f ehci_hcd [ 2.300212] usb usb4: SerialNumber: 0000:00:06.1 [ 2.300712] usb usb4: usb_probe_device [ 2.300722] usb usb4: configuration #1 chosen from 1 choice [ 2.300750] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.301548] hub 4-0:1.0: usb_probe_interface [ 2.301558] hub 4-0:1.0: usb_probe_interface - got id [ 2.301567] hub 4-0:1.0: USB hub found [ 2.301592] hub 4-0:1.0: 6 ports detected [ 2.301599] hub 4-0:1.0: standalone hub [ 2.301605] hub 4-0:1.0: no power switching (usb 1.0) [ 2.301612] hub 4-0:1.0: individual port over-current protection [ 2.301619] hub 4-0:1.0: power on to power good time: 20ms [ 2.301636] hub 4-0:1.0: local power source is good [ 2.301645] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.301719] drivers/usb/core/inode.c: creating file '001' [ 2.301798] ehci_hcd 0000:00:06.1: HS companion for 0000:00:06.0 [ 2.330079] ohci_hcd 0000:00:04.0: urb ffff88005d8ed840 path 5 ep1in 5e160000 cc 5 --> status -62 [ 2.331075] ohci_hcd 0000:00:04.0: urb ffff88005d8e0540 path 5 ep2in 5e160000 cc 5 --> status -62 [ 2.378086] ohci_hcd 0000:00:04.0: urb ffff88005d8ed840 path 5 ep1in 5e160000 cc 5 --> status -62 [ 2.379083] ohci_hcd 0000:00:04.0: urb ffff88005d8e0540 path 5 ep2in 5e160000 cc 5 --> status -62 [ 2.386838] ehci_hcd 0000:00:04.1: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.386856] hub 3-0:1.0: port 4: status 0501 change 0001 [ 2.386879] ehci_hcd 0000:00:04.1: GetStatus port:5 status 001403 0 ACK POWER sig=k CSC CONNECT [ 2.386893] hub 3-0:1.0: port 5: status 0501 change 0001 [ 2.386914] ehci_hcd 0000:00:04.1: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.386927] hub 3-0:1.0: port 6: status 0501 change 0001 [ 2.400064] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100 [ 2.400091] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [4] = 0x00030300 PESC CSC LSDA PPS [ 2.400112] hub 1-0:1.0: port 5, status 0300, change 0003, 1.5 Mb/s [ 2.400120] usb 1-5: USB disconnect, device number 3 [ 2.400125] usb 1-5: unregistering device [ 2.400132] usb 1-5: unregistering interface 1-5:1.0 [ 2.437515] usb 1-5: unregistering interface 1-5:1.1 [ 2.488246] usb 1-5: usb_disable_device nuking all URBs [ 2.626711] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x300 [ 2.626725] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00030100 PESC CSC PPS [ 2.626738] hub 1-0:1.0: port 6, status 0100, change 0003, 12 Mb/s [ 2.626746] usb 1-6: USB disconnect, device number 4 [ 2.626750] usb 1-6: unregistering device [ 2.626756] usb 1-6: unregistering interface 1-6:1.0 [ 2.627012] usb 1-6: usb_disable_device nuking all URBs [ 2.746748] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x100 [ 2.746759] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 2.746767] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 2.746774] hub 3-0:1.0: state 7 ports 6 chg 0070 evt 0000 [ 2.746786] hub 3-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 2.791708] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.800049] ehci_hcd 0000:00:04.1: port 4 full speed --> companion [ 2.800063] ehci_hcd 0000:00:04.1: GetStatus port:4 status 003001 0 ACK POWER OWNER sig=se0 CONNECT [ 2.800076] hub 3-0:1.0: port 4 not reset yet, waiting 50ms [ 2.853392] ehci_hcd 0000:00:04.1: GetStatus port:4 status 003802 0 ACK POWER OWNER sig=j CSC [ 2.853433] hub 3-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 2.853450] ehci_hcd 0000:00:04.1: port 5 low speed --> companion [ 2.906733] ehci_hcd 0000:00:04.1: GetStatus port:5 status 003402 0 ACK POWER OWNER sig=k CSC [ 2.906773] hub 3-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 2.960079] ehci_hcd 0000:00:04.1: port 6 full speed --> companion [ 2.960097] ehci_hcd 0000:00:04.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT [ 2.960116] hub 3-0:1.0: port 6 not reset yet, waiting 50ms [ 2.967212] dracut: Remounting /dev/disk/by-uuid/c900708e-25b3-4743-9c67-2b03a62f3d73 with -o ro,relatime,errors=remount-ro [ 2.975806] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.988713] dracut: Mounted root filesystem /dev/sda5 [ 3.013382] ehci_hcd 0000:00:04.1: GetStatus port:6 status 003802 0 ACK POWER OWNER sig=j CSC [ 3.013439] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 3.013451] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 3.013463] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS [ 3.013473] hub 1-0:1.0: port 4, status 0101, change 0001, 12 Mb/s [ 3.133373] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x101 [ 3.200030] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS [ 3.253417] usb 1-4: new full speed USB device number 5 using ohci_hcd [ 3.282636] dracut: Switching root [ 3.323384] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS [ 3.421115] usb 1-4: udev 5, busnum 1, minor = 4 [ 3.421127] usb 1-4: New USB device found, idVendor=0a12, idProduct=0001 [ 3.421136] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.421478] usb 1-4: usb_probe_device [ 3.421487] usb 1-4: configuration #1 chosen from 1 choice [ 3.424093] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 3.424372] usb 1-4: adding 1-4:1.1 (config #1, interface 1) [ 3.424566] drivers/usb/core/inode.c: creating file '005' [ 3.424613] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [4] = 0x00010301 CSC LSDA PPS CCS [ 3.424627] hub 1-0:1.0: port 5, status 0301, change 0001, 1.5 Mb/s [ 3.543381] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x301 [ 3.610036] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.663390] usb 1-5: new low speed USB device number 6 using ohci_hcd [ 3.730047] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 3.811087] usb 1-5: skipped 1 descriptor after interface [ 3.811096] usb 1-5: skipped 1 descriptor after interface [ 3.814078] usb 1-5: default language 0x0409 [ 3.823075] usb 1-5: udev 6, busnum 1, minor = 5 [ 3.823082] usb 1-5: New USB device found, idVendor=0a81, idProduct=0205 [ 3.823088] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.823094] usb 1-5: Product: PS2 to USB Converter [ 3.823099] usb 1-5: Manufacturer: CHESEN [ 3.823392] usb 1-5: usb_probe_device [ 3.823403] usb 1-5: configuration #1 chosen from 1 choice [ 3.831096] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 3.831327] usbhid 1-5:1.0: usb_probe_interface [ 3.831335] usbhid 1-5:1.0: usb_probe_interface - got id [ 3.840610] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.0/input/input4 [ 3.841082] generic-usb 0003:0A81:0205.0003: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:04.0-5/input0 [ 3.841200] usb 1-5: adding 1-5:1.1 (config #1, interface 1) [ 3.841408] usbhid 1-5:1.1: usb_probe_interface [ 3.841419] usbhid 1-5:1.1: usb_probe_interface - got id [ 3.852668] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:04.0/usb1/1-5/1-5:1.1/input/input5 [ 3.853179] generic-usb 0003:0A81:0205.0004: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:04.0-5/input1 [ 3.853222] drivers/usb/core/inode.c: creating file '006' [ 3.853274] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00010101 CSC PPS CCS [ 3.853289] hub 1-0:1.0: port 6, status 0101, change 0001, 12 Mb/s [ 3.970058] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x101 [ 4.036733] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00100103 PRSC PPS PES CCS [ 4.090069] usb 1-6: new full speed USB device number 7 using ohci_hcd [ 4.156741] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00100103 PRSC PPS PES CCS [ 4.234082] usb 1-6: udev 7, busnum 1, minor = 6 [ 4.234090] usb 1-6: New USB device found, idVendor=0cf3, idProduct=3000 [ 4.234096] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.234408] usb 1-6: usb_probe_device [ 4.234421] usb 1-6: configuration #1 chosen from 1 choice [ 4.237109] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 4.237353] drivers/usb/core/inode.c: creating file '007' [ 4.237393] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 4.361331] udevd[1549]: starting version 172 [ 4.874196] wmi: Mapper loaded [ 5.218752] nvidia: module license 'NVIDIA' taints kernel. [ 5.218761] Disabling lock debugging due to kernel taint [ 5.470054] Linux media interface: v0.10 [ 5.549471] Linux video capture interface: v2.00 [ 5.933864] IR NEC protocol handler initialized [ 5.947334] IR RC5(x) protocol handler initialized [ 5.960394] cx2388x alsa driver version 0.0.8 loaded [ 5.961095] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18 [ 5.961138] cx88_audio 0000:01:05.1: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 5.961886] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 5.967161] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1 [ 5.967172] cx88[0]: TV tuner type -1, Radio tuner type -1 [ 5.973461] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded [ 5.988507] IR RC6 protocol handler initialized [ 6.019443] IR JVC protocol handler initialized [ 6.055152] IR Sony protocol handler initialized [ 6.084312] lirc_dev: IR Remote Control driver registered, major 250 [ 6.085238] IR LIRC bridge handler initialized [ 6.166224] i2c-core: driver [tuner] using legacy suspend method [ 6.166232] i2c-core: driver [tuner] using legacy resume method [ 6.245634] tveeprom 0-0050: Hauppauge model 69100, rev B4C3, serial# 7067407 [ 6.245645] tveeprom 0-0050: MAC address is 00:0d:fe:6b:d7:0f [ 6.245654] tveeprom 0-0050: tuner model is Conexant CX24118A (idx 123, type 4) [ 6.245664] tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80) [ 6.245671] tveeprom 0-0050: audio processor is None (idx 0) [ 6.245679] tveeprom 0-0050: decoder processor is CX880 (idx 20) [ 6.245686] tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter [ 6.245694] cx88[0]: hauppauge eeprom: model=69100 [ 6.283417] Registered IR keymap rc-hauppauge [ 6.283689] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:09.0/0000:01:05.1/rc/rc0/input6 [ 6.283813] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:09.0/0000:01:05.1/rc/rc0 [ 6.284004] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0 [ 6.284110] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 6.284422] cx8800 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 6.284448] cx88[0]/0: found at 0000:01:05.0, rev: 5, irq: 18, latency: 64, mmio: 0xf9000000 [ 6.284678] cx88[0]/0: registered device video0 [v4l2] [ 6.284740] cx88[0]/0: registered device vbi0 [ 6.284783] cx88[0]/2: cx2388x 8802 Driver Manager [ 6.284806] cx88-mpeg driver manager 0000:01:05.2: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 6.284821] cx88[0]/2: found at 0000:01:05.2, rev: 5, irq: 18, latency: 64, mmio: 0xf7000000 [ 6.364794] cx88/2: cx2388x dvb driver version 0.0.8 loaded [ 6.364805] cx88/2: registering cx8802 driver, type: dvb access: shared [ 6.364815] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69] [ 6.364824] cx88[0]/2: cx2388x based DVB/ATSC card [ 6.364830] cx8802_alloc_frontends() allocating 1 frontend(s) [ 6.585634] DVB: registering new adapter (cx88[0]) [ 6.585649] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)... [ 7.531617] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20 [ 7.531632] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 20 (level, low) -> IRQ 20 [ 7.532080] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23 [ 7.532089] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23 [ 7.532105] nvidia 0000:02:00.0: setting latency timer to 64 [ 7.532115] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.532600] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 [ 8.384955] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended [ 8.385202] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 9.204497] EXT4-fs (sda1): warning: checktime reached, running e2fsck is recommended [ 9.204877] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.329975] EXT4-fs (sda7): warning: checktime reached, running e2fsck is recommended [ 9.571886] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 9.598102] EXT4-fs (sda6): warning: checktime reached, running e2fsck is recommended [ 9.599374] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 11.094260] fuse init (API version 7.16) [ 11.312216] r8169 0000:03:00.0: eth0: link down [ 11.312229] r8169 0000:03:00.0: eth0: link down [ 11.313002] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.727174] r8169 0000:03:00.0: eth0: link up [ 13.727973] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.516247] r8169 0000:03:00.0: eth0: link down [ 16.809848] r8169 0000:03:00.0: eth0: link up [ 20.770977] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... [ 20.797657] cx24116_firmware_ondemand: Waiting for firmware upload(2)... [ 25.960038] cx24116_load_firmware: FW version 1.23.86.1 [ 25.960062] cx24116_firmware_ondemand: Firmware upload complete [ 26.118176] hrtimer: interrupt took 1133 ns