| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <929137d06c253bafa2a5559534dd865d4d5a959e.1314028707.git.mina86@mina86.com>
Date: Mon, 22 Aug 2011 18:04:19 +0200
From: Michal Nazarewicz <mnazarewicz@...gle.com>
To: Alan Stern <stern@...land.harvard.edu>, Felipe Balbi <balbi@...com>
Cc: "Sebastian Andrzej Siewior" <bigeasy@...utronix.de>,
"Yang Rui Rui" <ruirui.r.yang@...to.com>,
"Dave Young" <hidave.darkstar@...il.com>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCHv4 1/4] usb: Provide usb_speed_string() function
From: Michal Nazarewicz <mina86@...a86.com>
In a few places in the kernel, the code prints
a human-readable USB device speed (eg. "high speed").
This involves a switch statement sometimes wrapped
around in ({ ... }) block leading to code repetition.
To mitigate this issue, this commit introduces
usb_speed_string() function, which returns
a human-readable name of provided speed.
It also changes a few places switch was used to use
this new function. This changes a bit the way the
speed is printed in few instances at the same time
standardising it.
Signed-off-by: Michal Nazarewicz <mina86@...a86.com>
---
drivers/usb/Makefile | 3 ++
drivers/usb/common.c | 24 ++++++++++++++++
drivers/usb/core/hub.c | 27 ++++++------------
drivers/usb/gadget/amd5536udc.c | 9 +----
drivers/usb/gadget/atmel_usba_udc.c | 9 ++---
drivers/usb/gadget/composite.c | 22 ++------------
drivers/usb/gadget/file_storage.c | 15 ++-------
drivers/usb/gadget/fsl_udc_core.c | 53 ++++++++++++----------------------
drivers/usb/gadget/gmidi.c | 11 +------
drivers/usb/gadget/langwell_udc.c | 50 +++++++++++---------------------
drivers/usb/gadget/net2272.c | 4 +-
drivers/usb/gadget/net2280.c | 4 +--
drivers/usb/gadget/printer.c | 14 ++-------
drivers/usb/gadget/s3c-hsotg.c | 8 +----
drivers/usb/gadget/udc-core.c | 19 +-----------
drivers/usb/misc/usbtest.c | 21 +------------
include/linux/usb/ch9.h | 12 ++++++++
17 files changed, 110 insertions(+), 195 deletions(-)
create mode 100644 drivers/usb/common.c
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 30ddf8d..a3167cc 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -51,3 +51,6 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb/
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
obj-$(CONFIG_USB_OTG_UTILS) += otg/
obj-$(CONFIG_USB_GADGET) += gadget/
+
+obj-$(CONFIG_USB) += common.o
+obj-$(CONFIG_USB_GADGET) += common.o
diff --git a/drivers/usb/common.c b/drivers/usb/common.c
new file mode 100644
index 0000000..2f6627c
--- /dev/null
+++ b/drivers/usb/common.c
@@ -0,0 +1,24 @@
+/*
+ * Provides code common for host and device side USB.
+ */
+
+#include <linux/kernel.h> /* for ARRAY_SIZE() */
+#include <linux/module.h> /* for EXPORT_SYMBOL_GPL() */
+#include <linux/usb/ch9.h>
+
+const char *usb_speed_string(enum usb_device_speed speed)
+{
+ static const char *const names[] = {
+ [USB_SPEED_UNKNOWN] = "UNKNOWN",
+ [USB_SPEED_LOW] = "low-speed",
+ [USB_SPEED_FULL] = "full-speed",
+ [USB_SPEED_HIGH] = "high-speed",
+ [USB_SPEED_WIRELESS] = "wireless",
+ [USB_SPEED_SUPER] = "super-speed",
+ };
+
+ if (speed < 0 || speed >= ARRAY_SIZE(names))
+ speed = USB_SPEED_UNKNOWN;
+ return names[speed];
+}
+EXPORT_SYMBOL_GPL(usb_speed_string);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a428aa0..8614cbe 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2798,7 +2798,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
- char *speed, *type;
+ const char *speed;
int devnum = udev->devnum;
/* root hub ports have a slightly longer reset period
@@ -2858,25 +2858,16 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
default:
goto fail;
}
-
- type = "";
- switch (udev->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- case USB_SPEED_SUPER:
- speed = "super";
- break;
- case USB_SPEED_WIRELESS:
- speed = "variable";
- type = "Wireless ";
- break;
- default: speed = "?"; break;
- }
+
+ if (udev->speed == USB_SPEED_WIRELESS)
+ speed = "variable speed Wireless";
+ else
+ speed = usb_speed_string(udev->speed);
+
if (udev->speed != USB_SPEED_SUPER)
dev_info(&udev->dev,
- "%s %s speed %sUSB device number %d using %s\n",
- (udev->config) ? "reset" : "new", speed, type,
+ "%s %s USB device number %d using %s\n",
+ (udev->config) ? "reset" : "new", speed,
devnum, udev->bus->controller->driver->name);
/* Set up TT records, if needed */
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 70f2b37..397c9b9 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3014,13 +3014,8 @@ __acquires(dev->lock)
/* link up all endpoints */
udc_setup_endpoints(dev);
- if (dev->gadget.speed == USB_SPEED_HIGH) {
- dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
- "high");
- } else if (dev->gadget.speed == USB_SPEED_FULL) {
- dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
- "full");
- }
+ dev_info(&dev->pdev->dev, "Connect: %s\n",
+ usb_speed_string(dev->gadget.speed));
/* init ep 0 */
activate_control_endpoints(dev);
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 5b1665e..2507a34 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1718,13 +1718,12 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
spin_lock(&udc->lock);
}
- if (status & USBA_HIGH_SPEED) {
- DBG(DBG_BUS, "High-speed bus reset detected\n");
+ if (status & USBA_HIGH_SPEED)
udc->gadget.speed = USB_SPEED_HIGH;
- } else {
- DBG(DBG_BUS, "Full-speed bus reset detected\n");
+ else
udc->gadget.speed = USB_SPEED_FULL;
- }
+ DBG(DBG_BUS, "%s bus reset detected\n",
+ usb_speed_string(udc->gadget.speed));
ep0 = &usba_ep[0];
ep0->desc = &usba_ep0_desc;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5a3461e..0d03936 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -627,25 +627,9 @@ static int set_config(struct usb_composite_dev *cdev,
result = 0;
}
- INFO(cdev, "%s speed config #%d: %s\n",
- ({ char *speed;
- switch (gadget->speed) {
- case USB_SPEED_LOW:
- speed = "low";
- break;
- case USB_SPEED_FULL:
- speed = "full";
- break;
- case USB_SPEED_HIGH:
- speed = "high";
- break;
- case USB_SPEED_SUPER:
- speed = "super";
- break;
- default:
- speed = "?";
- break;
- } ; speed; }), number, c ? c->label : "unconfigured");
+ INFO(cdev, "%s config #%d: %s\n",
+ usb_speed_string(gadget->speed),
+ number, c ? c->label : "unconfigured");
if (!c)
goto done;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index cf875be..fede982 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2863,17 +2863,10 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config)
fsg->config = new_config;
if ((rc = do_set_interface(fsg, 0)) != 0)
fsg->config = 0; // Reset on errors
- else {
- char *speed;
-
- switch (fsg->gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }
- INFO(fsg, "%s speed config #%d\n", speed, fsg->config);
- }
+ else
+ INFO(fsg, "%s config #%d\n",
+ usb_speed_string(fsg->gadget->speed),
+ fsg->config);
}
return rc;
}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index de24a42..a3ce075 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1715,34 +1715,31 @@ static void dtd_complete_irq(struct fsl_udc *udc)
}
}
+static inline enum usb_device_speed portscx_device_speed(u32 reg)
+{
+ switch (speed & PORTSCX_PORT_SPEED_MASK) {
+ case PORTSCX_PORT_SPEED_HIGH:
+ return USB_SPEED_HIGH;
+ case PORTSCX_PORT_SPEED_FULL:
+ return USB_SPEED_FULL;
+ case PORTSCX_PORT_SPEED_LOW:
+ return USB_SPEED_LOW;
+ default:
+ return USB_SPEED_UNKNOWN;
+ }
+}
+
/* Process a port change interrupt */
static void port_change_irq(struct fsl_udc *udc)
{
- u32 speed;
-
if (udc->bus_reset)
udc->bus_reset = 0;
/* Bus resetting is finished */
- if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
+ if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET))
/* Get the speed */
- speed = (fsl_readl(&dr_regs->portsc1)
- & PORTSCX_PORT_SPEED_MASK);
- switch (speed) {
- case PORTSCX_PORT_SPEED_HIGH:
- udc->gadget.speed = USB_SPEED_HIGH;
- break;
- case PORTSCX_PORT_SPEED_FULL:
- udc->gadget.speed = USB_SPEED_FULL;
- break;
- case PORTSCX_PORT_SPEED_LOW:
- udc->gadget.speed = USB_SPEED_LOW;
- break;
- default:
- udc->gadget.speed = USB_SPEED_UNKNOWN;
- break;
- }
- }
+ udc->gadget.speed =
+ portscx_device_speed(fsl_readl(&dr_regs->portsc1));
/* Update USB state */
if (!udc->resume_state)
@@ -2167,20 +2164,8 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
default:
s = "None"; break;
}
- s;} ), ( {
- char *s;
- switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
- case PORTSCX_PORT_SPEED_FULL:
- s = "Full Speed"; break;
- case PORTSCX_PORT_SPEED_LOW:
- s = "Low Speed"; break;
- case PORTSCX_PORT_SPEED_HIGH:
- s = "High Speed"; break;
- default:
- s = "Undefined"; break;
- }
- s;
- } ),
+ s;} ),
+ usb_speed_string(portscx_device_speed(tmp_reg)),
(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
"Normal PHY mode" : "Low power mode",
(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 305a8a8..6c3d213 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -641,17 +641,8 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
if (result) {
gmidi_reset_config(dev);
} else {
- char *speed;
-
- switch (gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }
-
dev->config = number;
- INFO(dev, "%s speed\n", speed);
+ INFO(dev, "%s speed\n", usb_speed_string(gadget->speed));
}
return result;
}
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c2..806a5df 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -1700,20 +1700,7 @@ static ssize_t show_langwell_udc(struct device *_dev,
"BmAttributes: %d\n\n",
LPM_PTS(tmp_reg),
(tmp_reg & LPM_STS) ? 1 : 0,
- ({
- char *s;
- switch (LPM_PSPD(tmp_reg)) {
- case LPM_SPEED_FULL:
- s = "Full Speed"; break;
- case LPM_SPEED_LOW:
- s = "Low Speed"; break;
- case LPM_SPEED_HIGH:
- s = "High Speed"; break;
- default:
- s = "Unknown Speed"; break;
- }
- s;
- }),
+ usb_speed_string(lpm_device_speed(tmp_reg)),
(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
LPM_BA(tmp_reg));
@@ -2657,12 +2644,24 @@ done:
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
}
+static inline enum usb_device_speed lpm_device_speed(u32 reg)
+{
+ switch (LPM_PSPD(reg)) {
+ case LPM_SPEED_HIGH:
+ return USB_SPEED_HIGH;
+ case LPM_SPEED_FULL:
+ return USB_SPEED_FULL;
+ case LPM_SPEED_LOW:
+ return USB_SPEED_LOW;
+ default:
+ return USB_SPEED_UNKNOWN;
+ }
+}
/* port change detect interrupt handler */
static void handle_port_change(struct langwell_udc *dev)
{
u32 portsc1, devlc;
- u32 speed;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
@@ -2677,24 +2676,9 @@ static void handle_port_change(struct langwell_udc *dev)
/* bus reset is finished */
if (!(portsc1 & PORTS_PR)) {
/* get the speed */
- speed = LPM_PSPD(devlc);
- switch (speed) {
- case LPM_SPEED_HIGH:
- dev->gadget.speed = USB_SPEED_HIGH;
- break;
- case LPM_SPEED_FULL:
- dev->gadget.speed = USB_SPEED_FULL;
- break;
- case LPM_SPEED_LOW:
- dev->gadget.speed = USB_SPEED_LOW;
- break;
- default:
- dev->gadget.speed = USB_SPEED_UNKNOWN;
- break;
- }
- dev_vdbg(&dev->pdev->dev,
- "speed = %d, dev->gadget.speed = %d\n",
- speed, dev->gadget.speed);
+ dev->gadget.speed = lpm_device_speed(devlc);
+ dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
+ dev->gadget.speed);
}
/* LPM L0 to L1 */
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index ab98ea9..81d3dfa 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -1764,8 +1764,8 @@ net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat)
dev->gadget.speed = USB_SPEED_HIGH;
else
dev->gadget.speed = USB_SPEED_FULL;
- dev_dbg(dev->dev, "%s speed\n",
- (dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full");
+ dev_dbg(dev->dev, "%s\n",
+ usb_speed_string(dev->gadget.speed));
}
ep = &dev->ep[0];
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4..149ade6 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2266,9 +2266,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
else
dev->gadget.speed = USB_SPEED_FULL;
net2280_led_speed (dev, dev->gadget.speed);
- DEBUG (dev, "%s speed\n",
- (dev->gadget.speed == USB_SPEED_HIGH)
- ? "high" : "full");
+ DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed));
}
ep = &dev->ep [0];
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index a341dde..78fc14b 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -971,23 +971,15 @@ printer_set_config(struct printer_dev *dev, unsigned number)
usb_gadget_vbus_draw(dev->gadget,
dev->gadget->is_otg ? 8 : 100);
} else {
- char *speed;
unsigned power;
power = 2 * config_desc.bMaxPower;
usb_gadget_vbus_draw(dev->gadget, power);
- switch (gadget->speed) {
- case USB_SPEED_FULL: speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- case USB_SPEED_HIGH: speed = "high"; break;
-#endif
- default: speed = "?"; break;
- }
-
dev->config = number;
- INFO(dev, "%s speed config #%d: %d mA, %s\n",
- speed, number, power, driver_desc);
+ INFO(dev, "%s config #%d: %d mA, %s\n",
+ usb_speed_string(gadget->speed),
+ number, power, driver_desc);
}
return result;
}
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8bdee67..48b5c71 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1951,30 +1951,26 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
case S3C_DSTS_EnumSpd_FS:
case S3C_DSTS_EnumSpd_FS48:
hsotg->gadget.speed = USB_SPEED_FULL;
- dev_info(hsotg->dev, "new device is full-speed\n");
-
ep0_mps = EP0_MPS_LIMIT;
ep_mps = 64;
break;
case S3C_DSTS_EnumSpd_HS:
- dev_info(hsotg->dev, "new device is high-speed\n");
hsotg->gadget.speed = USB_SPEED_HIGH;
-
ep0_mps = EP0_MPS_LIMIT;
ep_mps = 512;
break;
case S3C_DSTS_EnumSpd_LS:
hsotg->gadget.speed = USB_SPEED_LOW;
- dev_info(hsotg->dev, "new device is low-speed\n");
-
/* note, we don't actually support LS in this driver at the
* moment, and the documentation seems to imply that it isn't
* supported by the PHYs on some of the devices.
*/
break;
}
+ dev_info(hsotg->dev, "new device is %s\n",
+ usb_speed_string(hsotg->gadget.speed));
/* we should now know the maximum packet size for an
* endpoint, so set the endpoints to a default value. */
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 05ba472..5e77a46 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -375,23 +375,8 @@ static ssize_t usb_udc_speed_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
- struct usb_gadget *gadget = udc->gadget;
-
- switch (gadget->speed) {
- case USB_SPEED_LOW:
- return snprintf(buf, PAGE_SIZE, "low-speed\n");
- case USB_SPEED_FULL:
- return snprintf(buf, PAGE_SIZE, "full-speed\n");
- case USB_SPEED_HIGH:
- return snprintf(buf, PAGE_SIZE, "high-speed\n");
- case USB_SPEED_WIRELESS:
- return snprintf(buf, PAGE_SIZE, "wireless\n");
- case USB_SPEED_SUPER:
- return snprintf(buf, PAGE_SIZE, "super-speed\n");
- case USB_SPEED_UNKNOWN: /* FALLTHROUGH */
- default:
- return snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
- }
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ usb_speed_string(udc->gadget->speed));
}
static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index bb10846..48b31e6 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -2298,25 +2298,8 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
usb_set_intfdata(intf, dev);
dev_info(&intf->dev, "%s\n", info->name);
- dev_info(&intf->dev, "%s speed {control%s%s%s%s%s} tests%s\n",
- ({ char *tmp;
- switch (udev->speed) {
- case USB_SPEED_LOW:
- tmp = "low";
- break;
- case USB_SPEED_FULL:
- tmp = "full";
- break;
- case USB_SPEED_HIGH:
- tmp = "high";
- break;
- case USB_SPEED_SUPER:
- tmp = "super";
- break;
- default:
- tmp = "unknown";
- break;
- }; tmp; }),
+ dev_info(&intf->dev, "%s {control%s%s%s%s%s} tests%s\n",
+ usb_speed_string(udev->speed),
info->ctrl_out ? " in/out" : "",
rtest, wtest,
irtest, iwtest,
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 0fd3fbd..7d4188f 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -851,6 +851,18 @@ enum usb_device_speed {
USB_SPEED_SUPER, /* usb 3.0 */
};
+#ifdef __KERNEL__
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for. If it's not
+ * any of the speeds defined in usb_device_speed enum, string for
+ * USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
enum usb_device_state {
/* NOTATTACHED isn't in the USB spec, and this state acts
* the same as ATTACHED ... but it's clearer this way.
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists