[ 0.000000] Linux version 3.1.0-rc3+ (marcia@marcia-desktop) (gcc version 4.6.1 (Debian 4.6.1-7) ) #24 Thu Aug 25 10:53:35 BRT 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf10000 (usable) [ 0.000000] BIOS-e820: 000000007bf10000 - 000000007bf18000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf18000 - 000000007bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: CLEVO M5X0JE /M5X0JE , BIOS 2005Q2 03/10/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7bf10 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f8260] f8260 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 12288 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 379fc000 - 37cf6000 [ 0.000000] Allocated new RAMDISK: 37702000 - 379fb5b5 [ 0.000000] Move RAMDISK from 00000000379fc000 - 0000000037cf55b4 to 37702000 - 379fb5b4 [ 0.000000] 1091MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x0007bf10 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007bf10 [ 0.000000] On node 0 totalpages: 507549 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2183 pages used for memmap [ 0.000000] HighMem zone: 277131 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: nVIDIA [ 0.000000] MPTABLE: Product ID: C51-MCP51 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 1 [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503582 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc3+ root=UUID=92b6c2a8-b801-4435-b8b3-f36ad6a17a69 ro acpi=off [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007bf10) [ 0.000000] Memory: 2006108k/2030656k available (1830k kernel code, 24088k reserved, 1179k data, 300k init, 1117256k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc12f1000 - 0xc133c000 ( 300 kB) [ 0.000000] .data : 0xc11c9895 - 0xc12f0620 (1179 kB) [ 0.000000] .text : 0xc1000000 - 0xc11c9895 (1830 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=f600e000 soft=f6010000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1808.641 MHz processor. [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 3618.00 BogoMIPS (lpj=6028803) [ 0.006800] pid_max: default: 32768 minimum: 301 [ 0.006920] Mount-cache hash table entries: 512 [ 0.007102] mce: CPU supports 5 MCE banks [ 0.007176] using AMD E400 aware idle routine [ 0.007246] CPU: Mobile AMD Sempron(tm) Processor 3400+ stepping 02 [ 0.007447] Performance Events: AMD PMU driver. [ 0.007558] ... version: 0 [ 0.007621] ... bit width: 48 [ 0.007685] ... generic registers: 4 [ 0.007748] ... value mask: 0000ffffffffffff [ 0.007814] ... max period: 00007fffffffffff [ 0.007879] ... fixed-purpose events: 0 [ 0.007942] ... event mask: 000000000000000f [ 0.008166] NMI watchdog enabled, takes one hw-pmu counter. [ 0.008248] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.010079] ExtINT not setup in hardware but reported by MP table [ 0.010625] ..TIMER: vector=0x30 apic1=-1 pin1=-1 apic2=0 pin2=0 [ 0.150092] devtmpfs: initialized [ 0.150252] PM: Registering ACPI NVS region at 7bf18000 (425984 bytes) [ 0.150389] RTC time: 11:11:27, date: 08/25/11 [ 0.150479] NET: Registered protocol family 16 [ 0.150638] node 0 link 0: io port [1000, fffff] [ 0.150642] TOM: 0000000080000000 aka 2048M [ 0.150708] node 0 link 0: mmio [a0000, bffff] [ 0.150712] node 0 link 0: mmio [80000000, dfffffff] [ 0.150715] node 0 link 0: mmio [e0000000, efffffff] [ 0.150719] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.150722] bus: [00, ff] on node 0 link 0 [ 0.150726] bus: 00 index 0 [io 0x0000-0xffff] [ 0.150729] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.150732] bus: 00 index 2 [mem 0x80000000-0xfcffffffff] [ 0.159491] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. [ 0.159572] PCI: BIOS BUG #81[00000000] found [ 0.159636] PCI: Using configuration type 1 for base access [ 0.160240] bio: create slab at 0 [ 0.160359] ACPI: Interpreter disabled. [ 0.160477] vgaarb: loaded [ 0.160574] PCI: Probing PCI hardware [ 0.160576] PCI: Probing PCI hardware (bus 00) [ 0.160607] pci_bus 0000:00: scanning bus [ 0.160621] pci 0000:00:00.0: [10de:02f3] type 0 class 0x000500 [ 0.160632] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.160659] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.160681] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500 [ 0.160685] pci 0000:00:00.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.160711] pci 0000:00:00.1: calling quirk_resource_alignment+0x0/0x166 [ 0.160721] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500 [ 0.160726] pci 0000:00:00.2: calling quirk_mmio_always_on+0x0/0x13 [ 0.160758] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x166 [ 0.160770] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500 [ 0.160774] pci 0000:00:00.3: calling quirk_mmio_always_on+0x0/0x13 [ 0.160806] pci 0000:00:00.3: calling quirk_resource_alignment+0x0/0x166 [ 0.160818] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500 [ 0.160823] pci 0000:00:00.4: calling quirk_mmio_always_on+0x0/0x13 [ 0.160857] pci 0000:00:00.4: calling quirk_resource_alignment+0x0/0x166 [ 0.160870] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500 [ 0.160876] pci 0000:00:00.5: calling quirk_mmio_always_on+0x0/0x13 [ 0.160901] pci 0000:00:00.5: calling quirk_resource_alignment+0x0/0x166 [ 0.160920] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500 [ 0.160925] pci 0000:00:00.6: calling quirk_mmio_always_on+0x0/0x13 [ 0.160950] pci 0000:00:00.6: calling quirk_resource_alignment+0x0/0x166 [ 0.160961] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500 [ 0.160965] pci 0000:00:00.7: calling quirk_mmio_always_on+0x0/0x13 [ 0.160998] pci 0000:00:00.7: calling quirk_resource_alignment+0x0/0x166 [ 0.161014] pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604 [ 0.161018] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.161032] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x166 [ 0.161046] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.161050] pci 0000:00:02.0: PME# disabled [ 0.161066] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604 [ 0.161070] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.161085] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x166 [ 0.161097] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.161101] pci 0000:00:03.0: PME# disabled [ 0.161116] pci 0000:00:05.0: [10de:0247] type 0 class 0x000300 [ 0.161122] pci 0000:00:05.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.161129] pci 0000:00:05.0: reg 10: [mem 0xb2000000-0xb2ffffff] [ 0.161136] pci 0000:00:05.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.161143] pci 0000:00:05.0: reg 1c: [mem 0xb1000000-0xb1ffffff 64bit] [ 0.161151] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.161157] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x166 [ 0.161196] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500 [ 0.161214] pci 0000:00:09.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.161330] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x166 [ 0.161396] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601 [ 0.161401] pci 0000:00:0a.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.161452] pci 0000:00:0a.0: calling nvidia_force_enable_hpet+0x0/0x7e [ 0.161455] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.161525] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x166 [ 0.161545] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05 [ 0.161556] pci 0000:00:0a.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.161596] pci 0000:00:0a.1: reg 20: [io 0x3040-0x307f] [ 0.161606] pci 0000:00:0a.1: reg 24: [io 0x3000-0x303f] [ 0.161620] pci 0000:00:0a.1: calling quirk_resource_alignment+0x0/0x166 [ 0.161643] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.161650] pci 0000:00:0a.1: PME# disabled [ 0.161678] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03 [ 0.161686] pci 0000:00:0b.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.161698] pci 0000:00:0b.0: reg 10: [mem 0xb0004000-0xb0004fff] [ 0.161741] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x166 [ 0.161756] pci 0000:00:0b.0: supports D1 D2 [ 0.161759] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.161764] pci 0000:00:0b.0: PME# disabled [ 0.161782] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03 [ 0.161792] pci 0000:00:0b.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.161803] pci 0000:00:0b.1: reg 10: [mem 0xb0005000-0xb00050ff] [ 0.161844] pci 0000:00:0b.1: calling quirk_resource_alignment+0x0/0x166 [ 0.161864] pci 0000:00:0b.1: supports D1 D2 [ 0.161867] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.161871] pci 0000:00:0b.1: PME# disabled [ 0.161898] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101 [ 0.161905] pci 0000:00:0d.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.161938] pci 0000:00:0d.0: reg 20: [io 0x3080-0x308f] [ 0.161957] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x166 [ 0.161988] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101 [ 0.161999] pci 0000:00:0e.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.162010] pci 0000:00:0e.0: reg 10: [io 0x30b0-0x30b7] [ 0.162019] pci 0000:00:0e.0: reg 14: [io 0x30a4-0x30a7] [ 0.162028] pci 0000:00:0e.0: reg 18: [io 0x30a8-0x30af] [ 0.162037] pci 0000:00:0e.0: reg 1c: [io 0x30a0-0x30a3] [ 0.162046] pci 0000:00:0e.0: reg 20: [io 0x3090-0x309f] [ 0.162055] pci 0000:00:0e.0: reg 24: [mem 0xb0006000-0xb0006fff] [ 0.162069] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x166 [ 0.162109] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604 [ 0.162118] pci 0000:00:10.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.162144] pci 0000:00:10.0: calling quirk_resource_alignment+0x0/0x166 [ 0.162179] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403 [ 0.162191] pci 0000:00:10.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.162202] pci 0000:00:10.1: reg 10: [mem 0xb0000000-0xb0003fff] [ 0.162245] pci 0000:00:10.1: calling quirk_resource_alignment+0x0/0x166 [ 0.162268] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.162272] pci 0000:00:10.1: PME# disabled [ 0.162304] pci 0000:00:14.0: [10de:0269] type 0 class 0x000680 [ 0.162311] pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.162322] pci 0000:00:14.0: reg 10: [mem 0xb0007000-0xb0007fff] [ 0.162331] pci 0000:00:14.0: reg 14: [io 0x30b8-0x30bf] [ 0.162367] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x166 [ 0.162380] pci 0000:00:14.0: supports D1 D2 [ 0.162383] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.162388] pci 0000:00:14.0: PME# disabled [ 0.162403] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.162407] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.162418] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x166 [ 0.162430] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.162434] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.162446] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x166 [ 0.162455] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.162459] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x13 [ 0.162470] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x166 [ 0.162479] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.162483] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x13 [ 0.162494] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x166 [ 0.162508] pci_bus 0000:00: fixups for bus [ 0.162511] PCI: peer root bus 00 res updated from pci conf [ 0.162517] pci 0000:00:02.0: scanning [bus 01-02] behind bridge, pass 0 [ 0.162539] pci_bus 0000:01: scanning bus [ 0.162542] pci_bus 0000:01: fixups for bus [ 0.162546] pci 0000:00:02.0: PCI bridge to [bus 01-02] [ 0.162613] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff] [ 0.162616] pci 0000:00:02.0: bridge window [mem 0xb3000000-0xb31fffff] [ 0.162621] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.162625] pci_bus 0000:01: bus scan returning with max=01 [ 0.162629] pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 0 [ 0.162650] pci_bus 0000:03: scanning bus [ 0.162654] pci_bus 0000:03: fixups for bus [ 0.162657] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.162725] pci_bus 0000:03: bus scan returning with max=03 [ 0.162730] pci 0000:00:10.0: scanning [bus 05-06] behind bridge, pass 0 [ 0.162754] pci_bus 0000:05: scanning bus [ 0.162777] pci 0000:05:07.0: [104c:8039] type 2 class 0x000607 [ 0.162786] pci 0000:05:07.0: calling quirk_mmio_always_on+0x0/0x13 [ 0.162800] pci 0000:05:07.0: reg 10: [mem 0xb3200000-0xb3200fff] [ 0.162808] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x166 [ 0.162825] pci 0000:05:07.0: supports D1 D2 [ 0.162828] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.162834] pci 0000:05:07.0: PME# disabled [ 0.162853] pci 0000:05:07.1: [104c:803a] type 0 class 0x000c00 [ 0.162862] pci 0000:05:07.1: calling quirk_mmio_always_on+0x0/0x13 [ 0.162876] pci 0000:05:07.1: reg 10: [mem 0xb3201000-0xb32017ff] [ 0.162888] pci 0000:05:07.1: reg 14: [mem 0xb3204000-0xb3207fff] [ 0.162936] pci 0000:05:07.1: calling quirk_resource_alignment+0x0/0x166 [ 0.162953] pci 0000:05:07.1: supports D1 D2 [ 0.162956] pci 0000:05:07.1: PME# supported from D0 D1 D2 D3hot [ 0.162961] pci 0000:05:07.1: PME# disabled [ 0.162980] pci 0000:05:07.2: [104c:803b] type 0 class 0x000180 [ 0.162989] pci 0000:05:07.2: calling quirk_mmio_always_on+0x0/0x13 [ 0.163003] pci 0000:05:07.2: reg 10: [mem 0xb3202000-0xb3202fff] [ 0.163058] pci 0000:05:07.2: calling quirk_resource_alignment+0x0/0x166 [ 0.163074] pci 0000:05:07.2: supports D1 D2 [ 0.163077] pci 0000:05:07.2: PME# supported from D0 D1 D2 D3hot [ 0.163082] pci 0000:05:07.2: PME# disabled [ 0.163101] pci 0000:05:07.3: [104c:803c] type 0 class 0x000805 [ 0.163110] pci 0000:05:07.3: calling quirk_mmio_always_on+0x0/0x13 [ 0.163124] pci 0000:05:07.3: reg 10: [mem 0xb3201800-0xb32018ff] [ 0.163178] pci 0000:05:07.3: calling quirk_resource_alignment+0x0/0x166 [ 0.163195] pci 0000:05:07.3: supports D1 D2 [ 0.163198] pci 0000:05:07.3: PME# supported from D0 D1 D2 D3hot [ 0.163203] pci 0000:05:07.3: PME# disabled [ 0.163245] pci_bus 0000:05: fixups for bus [ 0.163248] pci 0000:00:10.0: PCI bridge to [bus 05-06] (subtractive decode) [ 0.163320] pci 0000:00:10.0: bridge window [mem 0xb3200000-0xb32fffff] [ 0.163330] pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.163334] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.163338] pci 0000:00:10.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode) [ 0.163343] pci 0000:05:07.0: scanning [bus 06-06] behind bridge, pass 0 [ 0.163351] pci 0000:05:07.0: scanning [bus 06-06] behind bridge, pass 1 [ 0.163384] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06] [ 0.163469] pci_bus 0000:05: bus scan returning with max=09 [ 0.163474] pci 0000:00:02.0: scanning [bus 01-02] behind bridge, pass 1 [ 0.163479] pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 1 [ 0.163484] pci 0000:00:10.0: scanning [bus 05-06] behind bridge, pass 1 [ 0.163490] pci_bus 0000:00: bus scan returning with max=09 [ 0.163788] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.170894] pci 0000:00:0a.0: default IRQ router [10de:0260] [ 0.170969] PCI: pci_cache_line_size set to 64 bytes [ 0.170985] pci 0000:00:05.0: BAR 0: reserving [mem 0xb2000000-0xb2ffffff flags 0x40200] (d=0, p=0) [ 0.170990] pci 0000:00:05.0: BAR 1: reserving [mem 0xc0000000-0xcfffffff flags 0x14220c] (d=0, p=0) [ 0.170995] pci 0000:00:05.0: BAR 3: reserving [mem 0xb1000000-0xb1ffffff flags 0x140204] (d=0, p=0) [ 0.171005] pci 0000:00:0a.1: BAR 4: reserving [io 0x3040-0x307f flags 0x40101] (d=0, p=0) [ 0.171009] pci 0000:00:0a.1: BAR 5: reserving [io 0x3000-0x303f flags 0x40101] (d=0, p=0) [ 0.171015] pci 0000:00:0b.0: BAR 0: reserving [mem 0xb0004000-0xb0004fff flags 0x40200] (d=0, p=0) [ 0.171021] pci 0000:00:0b.1: BAR 0: reserving [mem 0xb0005000-0xb00050ff flags 0x40200] (d=0, p=0) [ 0.171027] pci 0000:00:0d.0: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 0.171031] pci 0000:00:0d.0: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 0.171036] pci 0000:00:0d.0: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 0.171040] pci 0000:00:0d.0: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 0.171044] pci 0000:00:0d.0: BAR 4: reserving [io 0x3080-0x308f flags 0x40101] (d=0, p=0) [ 0.171050] pci 0000:00:0e.0: BAR 0: reserving [io 0x30b0-0x30b7 flags 0x40101] (d=0, p=0) [ 0.171055] pci 0000:00:0e.0: BAR 1: reserving [io 0x30a4-0x30a7 flags 0x40101] (d=0, p=0) [ 0.171059] pci 0000:00:0e.0: BAR 2: reserving [io 0x30a8-0x30af flags 0x40101] (d=0, p=0) [ 0.171064] pci 0000:00:0e.0: BAR 3: reserving [io 0x30a0-0x30a3 flags 0x40101] (d=0, p=0) [ 0.171068] pci 0000:00:0e.0: BAR 4: reserving [io 0x3090-0x309f flags 0x40101] (d=0, p=0) [ 0.171075] pci 0000:00:10.1: BAR 0: reserving [mem 0xb0000000-0xb0003fff flags 0x40200] (d=0, p=0) [ 0.171081] pci 0000:00:14.0: BAR 0: reserving [mem 0xb0007000-0xb0007fff flags 0x40200] (d=0, p=0) [ 0.171086] pci 0000:00:14.0: BAR 1: reserving [io 0x30b8-0x30bf flags 0x40101] (d=0, p=0) [ 0.171096] pci 0000:05:07.1: BAR 0: reserving [mem 0xb3201000-0xb32017ff flags 0x40200] (d=0, p=0) [ 0.171100] pci 0000:05:07.1: BAR 1: reserving [mem 0xb3204000-0xb3207fff flags 0x40200] (d=0, p=0) [ 0.171107] pci 0000:05:07.2: BAR 0: reserving [mem 0xb3202000-0xb3202fff flags 0x40200] (d=0, p=0) [ 0.171113] pci 0000:05:07.3: BAR 0: reserving [mem 0xb3201800-0xb32018ff flags 0x40200] (d=0, p=0) [ 0.171136] pci 0000:00:0e.0: BAR 5: reserving [mem 0xb0006000-0xb0006fff flags 0x40200] (d=1, p=1) [ 0.171148] pci 0000:05:07.0: BAR 0: reserving [mem 0xb3200000-0xb3200fff flags 0x40200] (d=1, p=1) [ 0.171158] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.171162] reserve RAM buffer: 000000007bf10000 - 000000007bffffff [ 0.172436] pnp: PnP ACPI: disabled [ 0.174550] PCI: max bus depth: 2 pci_try_num: 3 [ 0.174580] pci 0000:00:05.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.174664] pci 0000:00:02.0: PCI bridge to [bus 01-02] [ 0.174731] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff] [ 0.174799] pci 0000:00:02.0: bridge window [mem 0xb3000000-0xb31fffff] [ 0.174869] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.174952] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.175026] pci 0000:05:07.0: BAR 10: assigned [mem 0x84000000-0x87ffffff] [ 0.175098] pci 0000:05:07.0: BAR 9: assigned [mem 0x88000000-0x8bffffff pref] [ 0.175181] pci 0000:05:07.0: BAR 8: assigned [io 0x1000-0x10ff] [ 0.175250] pci 0000:05:07.0: BAR 7: assigned [io 0x1400-0x14ff] [ 0.175318] pci 0000:05:07.0: CardBus bridge to [bus 06-09] [ 0.175384] pci 0000:05:07.0: bridge window [io 0x1400-0x14ff] [ 0.175454] pci 0000:05:07.0: bridge window [io 0x1000-0x10ff] [ 0.175524] pci 0000:05:07.0: bridge window [mem 0x88000000-0x8bffffff pref] [ 0.175607] pci 0000:05:07.0: bridge window [mem 0x84000000-0x87ffffff] [ 0.175678] pci 0000:00:10.0: PCI bridge to [bus 05-06] [ 0.175746] pci 0000:00:10.0: bridge window [mem 0xb3200000-0xb32fffff] [ 0.175825] pci 0000:00:02.0: setting latency timer to 64 [ 0.175830] pci 0000:00:03.0: setting latency timer to 64 [ 0.175836] pci 0000:00:10.0: setting latency timer to 64 [ 0.175843] pci 0000:05:07.0: enabling device (0104 -> 0107) [ 0.175916] pci 0000:05:07.0: can't find IRQ for PCI INT D; probably buggy MP table [ 0.176001] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.176004] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.176008] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff] [ 0.176011] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.176015] pci_bus 0000:01: resource 1 [mem 0xb3000000-0xb31fffff] [ 0.176018] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.176022] pci_bus 0000:05: resource 1 [mem 0xb3200000-0xb32fffff] [ 0.176025] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.176029] pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff] [ 0.176032] pci_bus 0000:05: resource 6 [mem 0x80000000-0xfcffffffff] [ 0.176036] pci_bus 0000:06: resource 0 [io 0x1400-0x14ff] [ 0.176039] pci_bus 0000:06: resource 1 [io 0x1000-0x10ff] [ 0.176042] pci_bus 0000:06: resource 2 [mem 0x88000000-0x8bffffff pref] [ 0.176046] pci_bus 0000:06: resource 3 [mem 0x84000000-0x87ffffff] [ 0.176087] NET: Registered protocol family 2 [ 0.176188] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.176418] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.177359] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.177638] TCP: Hash tables configured (established 131072 bind 65536) [ 0.177706] TCP reno registered [ 0.177770] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.177843] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.177980] NET: Registered protocol family 1 [ 0.178058] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178077] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.178147] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.178217] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178222] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178227] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x8b [ 0.178232] pci 0000:00:00.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178237] pci 0000:00:00.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178242] pci 0000:00:00.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178246] pci 0000:00:00.1: calling pci_fixup_video+0x0/0x8b [ 0.178251] pci 0000:00:00.2: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178256] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178261] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178265] pci 0000:00:00.2: calling pci_fixup_video+0x0/0x8b [ 0.178270] pci 0000:00:00.3: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178275] pci 0000:00:00.3: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178280] pci 0000:00:00.3: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178284] pci 0000:00:00.3: calling pci_fixup_video+0x0/0x8b [ 0.178289] pci 0000:00:00.4: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178294] pci 0000:00:00.4: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178299] pci 0000:00:00.4: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178303] pci 0000:00:00.4: calling pci_fixup_video+0x0/0x8b [ 0.178308] pci 0000:00:00.5: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178315] pci 0000:00:00.5: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178320] pci 0000:00:00.5: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178324] pci 0000:00:00.5: calling pci_fixup_video+0x0/0x8b [ 0.178329] pci 0000:00:00.6: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178334] pci 0000:00:00.6: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178338] pci 0000:00:00.6: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178342] pci 0000:00:00.6: calling pci_fixup_video+0x0/0x8b [ 0.178347] pci 0000:00:00.7: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178352] pci 0000:00:00.7: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178357] pci 0000:00:00.7: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178361] pci 0000:00:00.7: calling pci_fixup_video+0x0/0x8b [ 0.178366] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178387] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.178454] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178458] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178463] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x8b [ 0.178468] pci 0000:00:03.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178491] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.178558] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178563] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178567] pci 0000:00:03.0: calling pci_fixup_video+0x0/0x8b [ 0.178572] pci 0000:00:05.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178578] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178583] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178587] pci 0000:00:05.0: calling pci_fixup_video+0x0/0x8b [ 0.178590] pci 0000:00:05.0: Boot video device [ 0.178595] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178620] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178624] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178629] pci 0000:00:09.0: calling pci_fixup_video+0x0/0x8b [ 0.178636] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178641] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178645] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178650] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0x8b [ 0.178655] pci 0000:00:0a.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178666] pci 0000:00:0a.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178671] pci 0000:00:0a.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.178675] pci 0000:00:0a.1: calling pci_fixup_video+0x0/0x8b [ 0.178680] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.178689] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.178693] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243327] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0x8b [ 0.243334] pci 0000:00:0b.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.243344] pci 0000:00:0b.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243350] pci 0000:00:0b.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243369] pci 0000:00:0b.1: calling pci_fixup_video+0x0/0x8b [ 0.243375] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.243383] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243387] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243392] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0x8b [ 0.243397] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.243458] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.243526] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243530] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243534] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0x8b [ 0.243540] pci 0000:00:10.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.243603] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.243671] pci 0000:00:10.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243675] pci 0000:00:10.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243679] pci 0000:00:10.0: calling pci_fixup_video+0x0/0x8b [ 0.243685] pci 0000:00:10.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.243751] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.243818] pci 0000:00:10.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243823] pci 0000:00:10.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243827] pci 0000:00:10.1: calling pci_fixup_video+0x0/0x8b [ 0.243833] pci 0000:00:14.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x18 [ 0.243841] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243845] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243849] pci 0000:00:14.0: calling pci_fixup_video+0x0/0x8b [ 0.243856] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243860] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243864] pci 0000:00:18.0: calling pci_fixup_video+0x0/0x8b [ 0.243870] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243874] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243878] pci 0000:00:18.1: calling pci_fixup_video+0x0/0x8b [ 0.243884] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243888] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243892] pci 0000:00:18.2: calling pci_fixup_video+0x0/0x8b [ 0.243898] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243902] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243906] pci 0000:00:18.3: calling pci_fixup_video+0x0/0x8b [ 0.243912] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243917] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243922] pci 0000:05:07.0: calling pci_fixup_video+0x0/0x8b [ 0.243928] pci 0000:05:07.1: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243933] pci 0000:05:07.1: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243937] pci 0000:05:07.1: calling pci_fixup_video+0x0/0x8b [ 0.243943] pci 0000:05:07.2: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243947] pci 0000:05:07.2: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243952] pci 0000:05:07.2: calling pci_fixup_video+0x0/0x8b [ 0.243958] pci 0000:05:07.3: calling quirk_cardbus_legacy+0x0/0x16 [ 0.243962] pci 0000:05:07.3: calling quirk_usb_early_handoff+0x0/0x4bd [ 0.243967] pci 0000:05:07.3: calling pci_fixup_video+0x0/0x8b [ 0.243971] PCI: CLS 64 bytes, default 64 [ 0.244025] Unpacking initramfs... [ 0.343284] Freeing initrd memory: 3048k freed [ 0.345671] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.350093] highmem bounce pool size: 64 pages [ 0.350100] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.367010] msgmni has been set to 1741 [ 0.367232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.367315] io scheduler noop registered [ 0.367378] io scheduler deadline registered [ 0.367451] io scheduler cfq registered (default) [ 0.367949] vga16fb: initializing [ 0.367953] vga16fb: mapped to 0xc00a0000 [ 0.368101] fb0: VGA16 VGA frame buffer device [ 0.415556] Linux agpgart interface v0.103 [ 0.415770] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.417517] i8042: Detected active multiplexing controller, rev 1.1 [ 0.418613] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.418682] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.418788] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.418866] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.419986] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.420385] mousedev: PS/2 mouse device common for all mice [ 0.420788] rtc_cmos: dev (254:0) [ 0.420798] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.420895] rtc0: alarms up to one day, 114 bytes nvram [ 0.420989] cpuidle: using governor ladder [ 0.421053] cpuidle: using governor menu [ 0.421129] TCP cubic registered [ 0.421192] NET: Registered protocol family 17 [ 0.421262] Registering the dns_resolver key type [ 0.421350] Using IPI Shortcut mode [ 0.421631] PM: Hibernation image not present or could not be loaded. [ 0.426971] Magic number: 7:672:176 [ 0.427084] tty ttyr2: hash matches [ 0.427260] rtc_cmos rtc_cmos: setting system clock to 2011-08-25 11:11:27 UTC (1314270687) [ 0.427454] Freeing unused kernel memory: 300k freed [ 0.427737] Write protecting the kernel text: 1832k [ 0.427826] Write protecting the kernel read-only data: 984k [ 0.427892] NX-protecting the kernel data: 2264k [ 0.446798] udevd[668]: starting version 172 [ 0.452280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.545243] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.545348] forcedeth 0000:00:14.0: can't find IRQ for PCI INT A; probably buggy MP table [ 0.546648] forcedeth 0000:00:14.0: setting latency timer to 64 [ 0.562858] SCSI subsystem initialized [ 0.574040] usbcore: registered new interface driver usbfs [ 0.574133] usbcore: registered new interface driver hub [ 0.577241] usbcore: registered new device driver usb [ 0.577780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.597363] libata version 3.00 loaded. [ 1.100432] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:90:f5:67:a6:d3 [ 1.100521] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 1.100737] ehci_hcd 0000:00:0b.1: can't find IRQ for PCI INT B; probably buggy MP table [ 1.100837] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 1.100842] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 1.100930] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 1.101040] ehci_hcd 0000:00:0b.1: debug port 1 [ 1.101112] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 1.101129] ehci_hcd 0000:00:0b.1: irq 10, io mem 0xb0005000 [ 1.109939] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 1.110265] hub 1-0:1.0: USB hub found [ 1.110332] hub 1-0:1.0: 8 ports detected [ 1.110598] sata_nv 0000:00:0e.0: version 3.5 [ 1.110607] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) [ 1.110682] sata_nv 0000:00:0e.0: can't find IRQ for PCI INT A; probably buggy MP table [ 1.110765] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.110882] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.113583] scsi0 : sata_nv [ 1.115331] scsi1 : sata_nv [ 1.115472] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 7 [ 1.115543] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 7 [ 1.115656] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.115701] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.116422] scsi2 : pata_amd [ 1.116648] scsi3 : pata_amd [ 1.116765] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 1.116834] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 1.117172] ata3: port disabled--ignoring [ 1.193726] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.193823] ohci_hcd 0000:00:0b.0: can't find IRQ for PCI INT A; probably buggy MP table [ 1.193923] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 1.193927] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 1.194004] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 1.194114] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000 [ 1.248829] hub 2-0:1.0: USB hub found [ 1.248902] hub 2-0:1.0: 8 ports detected [ 1.346618] Switching to clocksource tsc [ 1.416464] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.579773] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.586827] ata1.00: HPA detected: current 153356490, native 156301488 [ 1.586899] ata1.00: ATA-7: FUJITSU MHV2080BH, 0085002A, max UDMA/100 [ 1.586968] ata1.00: 153356490 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.600160] ata1.00: configured for UDMA/100 [ 1.600329] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0085 PQ: 0 ANSI: 5 [ 1.912989] ata2: SATA link down (SStatus 0 SControl 300) [ 2.073304] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33 [ 2.073376] ata4: nv_mode_filter: 0x739f&0x3f3ff->0x739f, BIOS=0x3f000 (0xc600) ACPI=0x0 [ 2.086565] ata4.00: configured for UDMA/33 [ 2.088881] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.60 PQ: 0 ANSI: 5 [ 2.102505] sd 0:0:0:0: [sda] 153356490 512-byte logical blocks: (78.5 GB/73.1 GiB) [ 2.102636] sd 0:0:0:0: [sda] Write Protect is off [ 2.102703] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.102723] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.105139] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.105145] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.105610] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.397299] sda: sda1 sda2 < sda5 sda6 > [ 2.397838] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.403758] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.403992] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.910874] PM: Starting manual resume from disk [ 2.910957] PM: Hibernation image partition 8:6 present [ 2.910960] PM: Looking for hibernation image. [ 2.911236] PM: Image not found (code -22) [ 2.911239] PM: Hibernation image not present or could not be loaded. [ 2.914983] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 2.914990] PM: Basic memory bitmaps created [ 2.932763] PM: Basic memory bitmaps freed [ 2.966467] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 3.216530] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.863220] udevd[846]: starting version 172 [ 7.832756] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 8.042432] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 8.042531] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 8.100300] NV_TCO: NV TCO WatchDog Timer Driver v0.01 [ 8.100462] NV_TCO: Watchdog reboot not detected. [ 8.100664] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0) [ 8.446989] cfg80211: Calling CRDA to update world regulatory domain [ 8.580244] snd_hda_intel 0000:00:10.1: can't find IRQ for PCI INT B; probably buggy MP table [ 8.580335] hda_intel: Disabling MSI [ 8.580421] snd_hda_intel 0000:00:10.1: setting latency timer to 64 [ 8.875261] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.875401] ieee80211 phy0: hwaddr 00:15:af:65:3e:90, RTL8187vB (default) V1 + rtl8225, rfkill mask 2 [ 8.886791] rtl8187: Customer ID is 0x00 [ 8.886890] Registered led device: rtl8187-phy0::radio [ 8.886912] Registered led device: rtl8187-phy0::tx [ 8.886934] Registered led device: rtl8187-phy0::rx [ 8.888157] rtl8187: wireless switch is off [ 8.888261] usbcore: registered new interface driver rtl8187 [ 9.034998] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x204000/0x0 [ 9.068725] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 9.091522] udevd[864]: renamed network interface wlan0 to wlan1 [ 11.623392] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 12.459813] hda_codec: ALC883: SKU not ready 0x411111f0 [ 12.546538] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input2 [ 13.781495] Adding 1004024k swap on /dev/sda6. Priority:-1 extents:1 across:1004024k [ 13.785700] EXT4-fs (sda5): re-mounted. Opts: (null) [ 14.106572] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 14.262374] fuse init (API version 7.17) [ 15.931277] RPC: Registered named UNIX socket transport module. [ 15.931361] RPC: Registered udp transport module. [ 15.931426] RPC: Registered tcp transport module. [ 15.931490] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.612578] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00) [ 19.618051] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects [ 19.618120] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup [ 141.287349] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 161.123878] wlan1: authenticate with 6c:2e:85:67:00:28 (try 1) [ 161.126007] wlan1: authenticated [ 161.220906] wlan1: associate with 6c:2e:85:67:00:28 (try 1) [ 161.223779] wlan1: RX AssocResp from 6c:2e:85:67:00:28 (capab=0x411 status=0 aid=1) [ 161.223783] wlan1: associated [ 179.014671] wlan1: deauthenticating from 6c:2e:85:67:00:28 by local choice (reason=3) [ 179.060837] cfg80211: Calling CRDA to update world regulatory domain [ 243.389359] ata1: EH in SWNCQ mode,QC:qc_active 0x7 sactive 0x7 [ 243.389367] ata1: SWNCQ:qc_active 0x3 defer_bits 0x4 last_issue_tag 0x1 [ 243.389368] dhfis 0x3 dmafis 0x0 sdbfis 0x0 [ 243.389374] ata1: ATA_REG 0x40 ERR_REG 0x0 [ 243.389377] ata1: tag : dhfis dmafis sdbfis sactive [ 243.389380] ata1: tag 0x0: 1 0 0 1 [ 243.389383] ata1: tag 0x1: 1 0 0 1 [ 243.389398] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen [ 243.389403] ata1.00: failed command: READ FPDMA QUEUED [ 243.389411] ata1.00: cmd 60/08:00:c9:10:be/00:00:07:00:00/40 tag 0 ncq 4096 in [ 243.389413] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 243.389417] ata1.00: status: { DRDY } [ 243.389420] ata1.00: failed command: READ FPDMA QUEUED [ 243.389428] ata1.00: cmd 60/08:08:19:10:be/00:00:07:00:00/40 tag 1 ncq 4096 in [ 243.389430] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 243.389433] ata1.00: status: { DRDY } [ 243.389437] ata1.00: failed command: WRITE FPDMA QUEUED [ 243.389444] ata1.00: cmd 61/58:10:79:4f:62/00:00:06:00:00/40 tag 2 ncq 45056 out [ 243.389446] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 243.389450] ata1.00: status: { DRDY } [ 243.389457] ata1: hard resetting link [ 243.389460] ata1: nv: skipping hardreset on occupied port [ 244.289547] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 244.306186] Clocksource tsc unstable (delta = 429752755 ns) [ 244.306214] Switching to clocksource jiffies [ 244.309862] ata1.00: configured for UDMA/100 [ 244.309862] ata1.00: device reported invalid CHS sector 0 [ 244.309862] ata1.00: device reported invalid CHS sector 0 [ 244.309862] ata1.00: device reported invalid CHS sector 0 [ 244.309862] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 244.309862] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 244.309862] Descriptor sense data with sense descriptors (in hex): [ 244.309862] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 244.309862] 00 00 00 00 [ 244.309862] sd 0:0:0:0: [sda] Add. Sense: No additional sense information [ 244.309862] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 07 be 10 c9 00 00 08 00 [ 244.309862] end_request: I/O error, dev sda, sector 129896649 [ 244.309862] ata1: EH complete [ 293.834434] ata1: EH in SWNCQ mode,QC:qc_active 0x7FF sactive 0x7FF [ 293.834442] ata1: SWNCQ:qc_active 0x1F defer_bits 0x7E0 last_issue_tag 0x4 [ 293.834444] dhfis 0x1F dmafis 0x0 sdbfis 0x0 [ 293.834449] ata1: ATA_REG 0x40 ERR_REG 0x0 [ 293.834452] ata1: tag : dhfis dmafis sdbfis sactive [ 293.834456] ata1: tag 0x0: 1 0 0 1 [ 293.834459] ata1: tag 0x1: 1 0 0 1 [ 293.834462] ata1: tag 0x2: 1 0 0 1 [ 293.834465] ata1: tag 0x3: 1 0 0 1 [ 293.834468] ata1: tag 0x4: 1 0 0 1 [ 293.834483] ata1.00: exception Emask 0x0 SAct 0x7ff SErr 0x0 action 0x6 frozen [ 293.834488] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834496] ata1.00: cmd 61/80:00:49:eb:6e/00:00:06:00:00/40 tag 0 ncq 65536 out [ 293.834498] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834502] ata1.00: status: { DRDY } [ 293.834505] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834513] ata1.00: cmd 61/00:08:c9:f2:6e/02:00:06:00:00/40 tag 1 ncq 262144 out [ 293.834515] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834518] ata1.00: status: { DRDY } [ 293.834522] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834530] ata1.00: cmd 61/c8:10:c9:f5:6e/01:00:06:00:00/40 tag 2 ncq 233472 out [ 293.834531] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834535] ata1.00: status: { DRDY } [ 293.834538] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834546] ata1.00: cmd 61/00:18:c9:47:6f/01:00:06:00:00/40 tag 3 ncq 131072 out [ 293.834547] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834551] ata1.00: status: { DRDY } [ 293.834554] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834562] ata1.00: cmd 61/80:20:01:07:7b/00:00:06:00:00/40 tag 4 ncq 65536 out [ 293.834564] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834567] ata1.00: status: { DRDY } [ 293.834570] ata1.00: failed command: READ FPDMA QUEUED [ 293.834578] ata1.00: cmd 60/08:28:41:8e:82/00:00:08:00:00/40 tag 5 ncq 4096 in [ 293.834580] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834583] ata1.00: status: { DRDY } [ 293.834587] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834594] ata1.00: cmd 61/08:30:a9:34:7b/00:00:06:00:00/40 tag 6 ncq 4096 out [ 293.834596] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834599] ata1.00: status: { DRDY } [ 293.834603] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834610] ata1.00: cmd 61/10:38:21:35:7b/00:00:06:00:00/40 tag 7 ncq 8192 out [ 293.834612] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834616] ata1.00: status: { DRDY } [ 293.834619] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834626] ata1.00: cmd 61/08:40:d1:33:7b/00:00:06:00:00/40 tag 8 ncq 4096 out [ 293.834628] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834632] ata1.00: status: { DRDY } [ 293.834635] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834643] ata1.00: cmd 61/08:48:99:5f:62/00:00:06:00:00/40 tag 9 ncq 4096 out [ 293.834644] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834648] ata1.00: status: { DRDY } [ 293.834651] ata1.00: failed command: WRITE FPDMA QUEUED [ 293.834659] ata1.00: cmd 61/58:50:a1:5f:62/00:00:06:00:00/40 tag 10 ncq 45056 out [ 293.834661] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 293.834664] ata1.00: status: { DRDY } [ 293.834671] ata1: hard resetting link [ 293.834674] ata1: nv: skipping hardreset on occupied port [ 294.301320] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 294.321806] ata1.00: configured for UDMA/100 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1.00: device reported invalid CHS sector 0 [ 294.321806] ata1: EH complete [ 359.603023] ata1: EH in SWNCQ mode,QC:qc_active 0x1E3 sactive 0x1E3 [ 359.603030] ata1: SWNCQ:qc_active 0x1E1 defer_bits 0x2 last_issue_tag 0x0 [ 359.603032] dhfis 0x1E0 dmafis 0x0 sdbfis 0x0 [ 359.603038] ata1: ATA_REG 0x40 ERR_REG 0x0 [ 359.603041] ata1: tag : dhfis dmafis sdbfis sactive [ 359.603044] ata1: tag 0x0: 0 0 0 1 [ 359.603047] ata1: tag 0x5: 1 0 0 1 [ 359.603050] ata1: tag 0x6: 1 0 0 1 [ 359.603053] ata1: tag 0x7: 1 0 0 1 [ 359.603056] ata1: tag 0x8: 1 0 0 1 [ 359.603072] ata1.00: exception Emask 0x0 SAct 0x1e3 SErr 0x0 action 0x6 frozen [ 359.603077] ata1.00: failed command: WRITE FPDMA QUEUED [ 359.603085] ata1.00: cmd 61/70:00:c1:61:62/00:00:06:00:00/40 tag 0 ncq 57344 out [ 359.603087] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 359.603090] ata1.00: status: { DRDY } [ 359.603094] ata1.00: failed command: READ FPDMA QUEUED [ 359.603101] ata1.00: cmd 60/20:08:91:23:9b/00:00:07:00:00/40 tag 1 ncq 16384 in [ 359.603103] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 359.603107] ata1.00: status: { DRDY } [ 359.603110] ata1.00: failed command: WRITE FPDMA QUEUED [ 359.603118] ata1.00: cmd 61/40:28:31:37:7b/00:00:06:00:00/40 tag 5 ncq 32768 out [ 359.603120] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 359.603123] ata1.00: status: { DRDY } [ 359.603126] ata1.00: failed command: WRITE FPDMA QUEUED [ 359.603134] ata1.00: cmd 61/08:30:21:37:7b/00:00:06:00:00/40 tag 6 ncq 4096 out [ 359.603136] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 359.603139] ata1.00: status: { DRDY } [ 359.603143] ata1.00: failed command: WRITE FPDMA QUEUED [ 359.603150] ata1.00: cmd 61/30:38:81:36:7b/00:00:06:00:00/40 tag 7 ncq 24576 out [ 359.603152] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 359.603155] ata1.00: status: { DRDY } [ 359.603159] ata1.00: failed command: WRITE FPDMA QUEUED [ 359.603166] ata1.00: cmd 61/08:40:b9:61:62/00:00:06:00:00/40 tag 8 ncq 4096 out [ 359.603168] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 359.603172] ata1.00: status: { DRDY } [ 359.603179] ata1: hard resetting link [ 359.603181] ata1: nv: skipping hardreset on occupied port [ 360.069906] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 360.090174] ata1.00: configured for UDMA/100 [ 360.090174] ata1.00: device reported invalid CHS sector 0 [ 360.090174] ata1.00: device reported invalid CHS sector 0 [ 360.090174] ata1.00: device reported invalid CHS sector 0 [ 360.090174] ata1.00: device reported invalid CHS sector 0 [ 360.090174] ata1.00: device reported invalid CHS sector 0 [ 360.090174] ata1.00: device reported invalid CHS sector 0 [ 360.090174] ata1: EH complete [ 395.538647] ata1: EH in SWNCQ mode,QC:qc_active 0x7FE00 sactive 0x7FE00 [ 395.538655] ata1: SWNCQ:qc_active 0x7E00 defer_bits 0x78000 last_issue_tag 0xe [ 395.538657] dhfis 0x3E00 dmafis 0x0 sdbfis 0x0 [ 395.538662] ata1: ATA_REG 0x40 ERR_REG 0x0 [ 395.538665] ata1: tag : dhfis dmafis sdbfis sactive [ 395.538669] ata1: tag 0x9: 1 0 0 1 [ 395.538672] ata1: tag 0xa: 1 0 0 1 [ 395.538675] ata1: tag 0xb: 1 0 0 1 [ 395.538678] ata1: tag 0xc: 1 0 0 1 [ 395.538681] ata1: tag 0xd: 1 0 0 1 [ 395.538684] ata1: tag 0xe: 0 0 0 1 [ 395.538697] ata1.00: NCQ disabled due to excessive errors [ 395.538703] ata1.00: exception Emask 0x0 SAct 0x7fe00 SErr 0x0 action 0x6 frozen [ 395.538708] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538717] ata1.00: cmd 61/80:48:49:34:8e/00:00:06:00:00/40 tag 9 ncq 65536 out [ 395.538718] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538722] ata1.00: status: { DRDY } [ 395.538725] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538733] ata1.00: cmd 61/00:50:c9:37:8e/01:00:06:00:00/40 tag 10 ncq 131072 out [ 395.538735] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538739] ata1.00: status: { DRDY } [ 395.538742] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538749] ata1.00: cmd 61/80:58:b9:37:7b/00:00:06:00:00/40 tag 11 ncq 65536 out [ 395.538751] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538755] ata1.00: status: { DRDY } [ 395.538758] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538766] ata1.00: cmd 61/08:60:c9:18:8e/00:00:06:00:00/40 tag 12 ncq 4096 out [ 395.538767] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538771] ata1.00: status: { DRDY } [ 395.538774] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538782] ata1.00: cmd 61/40:68:89:43:8e/00:00:06:00:00/40 tag 13 ncq 32768 out [ 395.538783] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538787] ata1.00: status: { DRDY } [ 395.538790] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538798] ata1.00: cmd 61/08:70:d9:ff:6e/00:00:06:00:00/40 tag 14 ncq 4096 out [ 395.538800] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538803] ata1.00: status: { DRDY } [ 395.538806] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538814] ata1.00: cmd 61/08:78:a9:34:6a/00:00:06:00:00/40 tag 15 ncq 4096 out [ 395.538816] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538819] ata1.00: status: { DRDY } [ 395.538822] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538830] ata1.00: cmd 61/10:80:71:d7:6f/00:00:06:00:00/40 tag 16 ncq 8192 out [ 395.538832] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538835] ata1.00: status: { DRDY } [ 395.538839] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538846] ata1.00: cmd 61/08:88:61:ff:6d/00:00:06:00:00/40 tag 17 ncq 4096 out [ 395.538848] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538852] ata1.00: status: { DRDY } [ 395.538855] ata1.00: failed command: WRITE FPDMA QUEUED [ 395.538862] ata1.00: cmd 61/08:90:e9:62:62/01:00:06:00:00/40 tag 18 ncq 135168 out [ 395.538864] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.538868] ata1.00: status: { DRDY } [ 395.538874] ata1: hard resetting link [ 395.538877] ata1: nv: skipping hardreset on occupied port [ 396.005559] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 396.025796] ata1.00: configured for UDMA/100 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1.00: device reported invalid CHS sector 0 [ 396.025796] ata1: EH complete