[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAG1a4rukteF+NmmTEhYT5yOmUYfDcbZ5qsghai1wm3ndpeiesg@mail.gmail.com>
Date: Sat, 27 Aug 2011 18:50:37 -0400
From: Pavel Ivanov <paivanof@...il.com>
To: Michel Dänzer <michel@...nzer.net>
Cc: dri-devel@...ts.freedesktop.org,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: Kernel almost hangs when CONFIG_DRM_RADEON=y
2011/8/27 Michel Dänzer <michel@...nzer.net>:
>> I observe very strange behavior dependent on value of
>> CONFIG_DRM_RADEON parameter. When it's set to m everything works very
>> good, no problem. When I set it to y I see kernel hang during boot. Or
>> I should better say it "almost hangs" because during last boot attempt
>> I accidentally waited a little bit longer and saw that after more than
>> a minute waiting system continued to boot. Dmesg after "hang" shows
>> these messages:
>>
>> [ 8.542639] [drm] Loading CEDAR Microcode
>> [ 69.161605] r600_cp: Failed to load firmware "radeon/CEDAR_pfp.bin"
>> [ 69.161670] [drm:evergreen_startup] *ERROR* Failed to load firmware!
>>
>> While during normal boot
>>
>> [ 9.898870] [drm] Loading CEDAR Microcode
>> [ 9.908425] radeon 0000:05:00.0: WB enabled
>
> With CONFIG_DRM_RADEON=y, the microcode is needed before it can be
> loaded from userspace, so it needs to be built into the kernel as well.
How should I do that? I've tried to set all "m"s to "y" in .config and
still saw this issue. Should I set some special parameter?
Pavel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists