| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20110829102732.03f0f05d.rdunlap@xenotime.net>
Date: Mon, 29 Aug 2011 10:27:32 -0700
From: Randy Dunlap <rdunlap@...otime.net>
To: Luciano Coelho <coelho@...com>
Cc: matti.j.aaltonen@...ia.com, johannes@...solutions.net,
linux-kernel@...r.kernel.org, sameo@...ux.intel.com,
mchehab@...radead.org, linux-media@...r.kernel.org
Subject: Re: Kconfig unmet dependency with RADIO_WL1273
On Mon, 29 Aug 2011 20:02:38 +0300 Luciano Coelho wrote:
> Hi Matti,
>
> Johannes has just reported a problem in the Kconfig of radio-wl1273. It
> seems to select MFD_CORE, but if the platform doesn't support MFD, then
> MFD_SUPPORT won't be selected and this kind of warning will come out:
>
> warning: (OLPC_XO1_PM && OLPC_XO1_SCI && I2C_ISCH && GPIO_SCH && GPIO_RDC321X && RADIO_WL1273)
> selects MFD_CORE which has unmet direct dependencies (MFD_SUPPORT)
>
> I guess it must depend on MFD_SUPPORT, right? If that's the correct
> solution, the following patch should fix the problem:
>
> diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
> index 52798a1..e87f544 100644
> --- a/drivers/media/radio/Kconfig
> +++ b/drivers/media/radio/Kconfig
> @@ -425,7 +425,7 @@ config RADIO_TIMBERDALE
>
> config RADIO_WL1273
> tristate "Texas Instruments WL1273 I2C FM Radio"
> - depends on I2C && VIDEO_V4L2
> + depends on I2C && VIDEO_V4L2 && MFD_SUPPORT
> select MFD_CORE
> select MFD_WL1273_CORE
> select FW_LOADER
>
> The same problem is happening with other drivers too, so maybe there is
> a better solution to fix all problems at once. ;)
>
> Reported-by: Johannes Berg <johannes@...solutions.net>
Yes, it can depend on MFD_SUPPORT or it can select both
MFD_SUPPORT and MFD_CORE or we could do what Jean Delvare
suggested last December and combine the MFD_SUPPORT and MFD_CORE
symbols, like I2c does. I did a patch for that but never
posted it. It's below, but probably needs a good bit of
updating since this patch was made in January.
---
From: Randy Dunlap <rdunlap@...otime.net>
Combine MFD_SUPPORT (which only enabled the remainder of the MFD
menu) and MFD_CORE. This allows other drivers to select MFD_CORE
without needing to also select MFD_SUPPORT, which fixes some
kconfig unmet dependency warnings. Modeled after I2C kconfig.
Signed-off-by: Randy Dunlap <rdunlap@...otime.net>
---
drivers/mfd/Kconfig | 42 ++++--------------------------------------
1 file changed, 4 insertions(+), 38 deletions(-)
--- lnx-2637-rc5.orig/drivers/mfd/Kconfig
+++ lnx-2637-rc5/drivers/mfd/Kconfig
@@ -2,10 +2,9 @@
# Multifunction miscellaneous devices
#
-menuconfig MFD_SUPPORT
- bool "Multifunction device drivers"
+menuconfig MFD_CORE
+ tristate "Multifunction device drivers"
depends on HAS_IOMEM
- default y
help
Multifunction devices embed several functions (e.g. GPIOs,
touchscreens, keyboards, current regulators, power management chips,
@@ -18,16 +17,11 @@ menuconfig MFD_SUPPORT
This option alone does not add any kernel code.
-if MFD_SUPPORT
-
-config MFD_CORE
- tristate
- default n
+if MFD_CORE
config MFD_88PM860X
bool "Support Marvell 88PM8606/88PM8607"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
This supports for Marvell 88PM8606/88PM8607 Power Management IC.
This includes the I2C driver and the core APIs _only_, you have to
@@ -55,7 +49,6 @@ config MFD_SM501_GPIO
config MFD_ASIC3
bool "Support for Compaq ASIC3"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
- select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
@@ -63,7 +56,6 @@ config MFD_ASIC3
config MFD_SH_MOBILE_SDHI
bool "Support for SuperH Mobile SDHI"
depends on SUPERH || ARCH_SHMOBILE
- select MFD_CORE
select TMIO_MMC_DMA
---help---
This driver supports the SDHI hardware block found in many
@@ -71,7 +63,6 @@ config MFD_SH_MOBILE_SDHI
config MFD_DAVINCI_VOICECODEC
tristate
- select MFD_CORE
config MFD_DM355EVM_MSP
bool "DaVinci DM355 EVM microcontroller"
@@ -91,7 +82,6 @@ config HTC_EGPIO
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
- select MFD_CORE
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
@@ -133,7 +123,6 @@ config TPS65010
config TPS6507X
tristate "TPS6507x Power Management / Touch Screen chips"
- select MFD_CORE
depends on I2C
help
If you say yes here you get support for the TPS6507x series of
@@ -183,7 +172,6 @@ config TWL4030_POWER
config TWL4030_CODEC
bool
depends on TWL4030_CORE
- select MFD_CORE
default n
config TWL6030_PWM
@@ -198,7 +186,6 @@ config TWL6030_PWM
config MFD_STMPE
bool "Support STMicroelectronics STMPE"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
STMicroelectronics.
@@ -221,7 +208,6 @@ config MFD_STMPE
config MFD_TC35892
bool "Support Toshiba TC35892"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Support for the Toshiba TC35892 I/O Expander.
@@ -241,7 +227,6 @@ config TMIO_MMC_DMA
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
depends on ARM && HAVE_CLK
- select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller T7L66XB
@@ -249,7 +234,6 @@ config MFD_T7L66XB
config MFD_TC6387XB
bool "Support Toshiba TC6387XB"
depends on ARM && HAVE_CLK
- select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller TC6387XB
@@ -257,7 +241,6 @@ config MFD_TC6387XB
config MFD_TC6393XB
bool "Support Toshiba TC6393XB"
depends on GPIOLIB && ARM
- select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller TC6393XB
@@ -286,7 +269,6 @@ config PMIC_ADP5520
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provies common support for
@@ -296,7 +278,6 @@ config MFD_MAX8925
config MFD_MAX8998
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
@@ -306,7 +287,6 @@ config MFD_MAX8998
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
- select MFD_CORE
depends on I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -320,7 +300,6 @@ config MFD_WM831X
config MFD_WM831X_I2C
bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
- select MFD_CORE
select MFD_WM831X
depends on I2C=y && GENERIC_HARDIRQS
help
@@ -331,7 +310,6 @@ config MFD_WM831X_I2C
config MFD_WM831X_SPI
bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
- select MFD_CORE
select MFD_WM831X
depends on SPI_MASTER && GENERIC_HARDIRQS
help
@@ -405,7 +383,6 @@ config MFD_WM8350_I2C
config MFD_WM8994
bool "Support Wolfson Microelectronics WM8994"
- select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS
help
The WM8994 is a highly integrated hi-fi CODEC designed for
@@ -430,7 +407,6 @@ config MFD_MC13783
config MFD_MC13XXX
tristate "Support Freescale MC13783 and MC13892"
depends on SPI_MASTER
- select MFD_CORE
select MFD_MC13783
help
Support for the Freescale (Atlas) PMIC and audio CODECs
@@ -466,7 +442,6 @@ config ABX500_CORE
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
depends on I2C=y && ABX500_CORE
- select MFD_CORE
default y if ARCH_U300
help
Select this to enable the AB3100 Mixed Signal IC core
@@ -497,7 +472,6 @@ config EZX_PCAP
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER && ARCH_U8500
- select MFD_CORE
help
Select this option to enable access to AB8500 power management
chip. This connects to U8500 either on the SSP/SPI bus
@@ -525,7 +499,6 @@ config AB8500_DEBUG
config AB3550_CORE
bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
- select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
help
Select this to enable the AB3550 Mixed Signal IC core
@@ -539,7 +512,6 @@ config AB3550_CORE
config MFD_TIMBERDALE
tristate "Support for the Timberdale FPGA"
- select MFD_CORE
depends on PCI && GPIOLIB
---help---
This is the core driver for the timberdale FPGA. This device is a
@@ -551,14 +523,12 @@ config MFD_TIMBERDALE
config LPC_SCH
tristate "Intel SCH LPC"
depends on PCI
- select MFD_CORE
help
LPC bridge function of the Intel SCH provides support for
System Management Bus and General Purpose I/O.
config MFD_RDC321X
tristate "Support for RDC-R321x southbridge"
- select MFD_CORE
depends on PCI
help
Say yes here if you want to have support for the RDC R-321x SoC
@@ -567,7 +537,6 @@ config MFD_RDC321X
config MFD_JANZ_CMODIO
tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
- select MFD_CORE
depends on PCI
help
This is the core driver for the Janz CMOD-IO PCI MODULbus
@@ -577,7 +546,6 @@ config MFD_JANZ_CMODIO
config MFD_JZ4740_ADC
tristate "Support for the JZ4740 SoC ADC core"
- select MFD_CORE
depends on MACH_JZ4740
help
Say yes here if you want support for the ADC unit in the JZ4740 SoC.
@@ -586,7 +554,6 @@ config MFD_JZ4740_ADC
config MFD_TPS6586X
bool "TPS6586x Power Management chips"
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
- select MFD_CORE
help
If you say yes here you get support for the TPS6586X series of
Power Management chips.
@@ -600,13 +567,12 @@ config MFD_TPS6586X
config MFD_VX855
tristate "Support for VIA VX855/VX875 integrated south bridge"
depends on PCI
- select MFD_CORE
help
Say yes here to enable support for various functions of the
VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
and/or vx855_gpio drivers for this to do anything useful.
-endif # MFD_SUPPORT
+endif # MFD_CORE
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists