| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1314712647-30008-3-git-send-email-keshava_mgowda@ti.com>
Date: Tue, 30 Aug 2011 19:27:27 +0530
From: Keshava Munegowda <keshava_mgowda@...com>
To: <linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Keshava Munegowda <keshava_mgowda@...com>, <balbi@...com>,
<gadiyar@...com>, <sameo@...ux.intel.com>, <parthab@...ia.ti.com>,
<tony@...mide.com>, <khilman@...com>, <b-cousson@...com>,
<paul@...an.com>, <johnstul@...ibm.com>, <vishwanath.bs@...com>,
Keshava Munegowda <Keshava_mgowda@...com>
Subject: [PATCH 2/2] arm: omap: usb: Add mux initialization to ehci and ohci hwmods for omap3
From: Keshava Munegowda <Keshava_mgowda@...com>
For ehci and ohci hwmods, the omap3 mux initializations functions
are included.
Signed-off-by: Keshava Munegowda <keshava_mgowda@...com>
---
arch/arm/mach-omap2/usb-host.c | 692 ++++++++++++++++++++++++++++++---------
1 files changed, 532 insertions(+), 160 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 9ec3d01..485341f 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -401,151 +401,525 @@ static struct omap_device_pad port2_2pin_pads[] __initdata = {
},
};
+/*
+ * OMAP3 pad confs
+ */
+static struct omap_device_pad omap3_port1_phy_pads[] __initdata = {
+ {
+ .name = "etk_clk.hsusb1_stp",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_ctl.hsusb1_clk",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d8.hsusb1_dir",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d9.hsusb1_nxt",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d0.hsusb1_data0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d1.hsusb1_data1",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d2.hsusb1_data2",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d7.hsusb1_data3",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d4.hsusb1_data4",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d5.hsusb1_data5",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d6.hsusb1_data6",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d3.hsusb1_data7",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+};
+
+static struct omap_device_pad omap3_port1_tll_pads[] __initdata = {
+ {
+ .name = "etk_clk.hsusb1_tll_stp",
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_ctl.hsusb1_tll_clk",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d8.hsusb1_tll_dir",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d9.hsusb1_tll_nxt",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d0.hsusb1_tll_data0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d1.hsusb1_tll_data1",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d2.hsusb1_tll_data2",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d7.hsusb1_tll_data3",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d4.hsusb1_tll_data4",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d5.hsusb1_tll_data5",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d6.hsusb1_tll_data6",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d3.hsusb1_tll_data7",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+};
+
+static struct omap_device_pad omap3_port2_phy_pads[] __initdata = {
+ {
+ .name = "etk_d11.hsusb2_stp",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d10.hsusb2_clk",
+ .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d12.hsusb2_dir",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d13.hsusb2_nxt",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d14.hsusb2_data0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "etk_d15.hsusb2_data1",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "mcspi1_cs3.hsusb2_data2",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "mcspi2_cs1.hsusb2_data3",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "mcspi2_simo.hsusb2_data4",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "mcspi2_somi.hsusb2_data5",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "mcspi2_cs0.hsusb2_data6",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+ {
+ .name = "mcspi2_clk.hsusb2_data7",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE3,
+ },
+};
+
+static struct omap_device_pad omap3_port2_tll_pads[] __initdata = {
+ {
+ .name = "etk_d11.hsusb2_tll_stp",
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d10.hsusb2_tll_clk",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d12.hsusb2_tll_dir",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d13.hsusb2_tll_nxt",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d14.hsusb2_tll_data0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "etk_d15.hsusb2_tll_data1",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcspi1_cs3.hsusb2_tll_data2",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE2,
+ },
+ {
+ .name = "mcspi2_cs1.hsusb2_tll_data3",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE2,
+ },
+ {
+ .name = "mcspi2_simo.hsusb2_tll_data4",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE2,
+ },
+ {
+ .name = "mcspi2_somi.hsusb2_tll_data5",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE2,
+ },
+ {
+ .name = "mcspi2_cs0.hsusb2_tll_data6",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE2,
+ },
+ {
+ .name = "mcspi2_clk.hsusb2_tll_data7",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE2,
+ },
+};
+
+static struct omap_device_pad omap3_port3_tll_pads[] __initdata = {
+ {
+ .name = "sdmmc2_dat5.hsusb3_tll_stp",
+ .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "uart1_cts.hsusb3_tll_clk",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "sdmmc2_dat6.hsusb3_tll_dir",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "sdmmc2_dat7.hsusb3_tll_nxt",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp4_dr.hsusb3_tll_data0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp4_clkx.hsusb3_tll_data1",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp4_dx.hsusb3_tll_data2",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp4_fsx.hsusb3_tll_data3",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp3_dx.hsusb3_tll_data4",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp3_dr.hsusb3_tll_data5",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp3_clkx.hsusb3_tll_data6",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcbsp3_fsx.hsusb3_tll_data7",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port1_6pin_pads[] __initdata = {
+ {
+ .name = "etk_clk.mm1_rxdp",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d9.mm1_rxdm",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d0.mm1_rxrcv",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d7.mm1_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d2.mm1_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d1.mm1_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port1_4pin_pads[] __initdata = {
+ {
+ .name = "etk_d0.mm1_rxrcv",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d7.mm1_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d2.mm1_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d1.mm1_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port1_3pin_pads[] __initdata = {
+ {
+ .name = "etk_d7.mm1_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d2.mm1_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d1.mm1_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port1_2pin_pads[] __initdata = {
+ {
+ .name = "etk_d2.mm1_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d1.mm1_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port2_6pin_pads[] __initdata = {
+ {
+ .name = "etk_d11.mm2_rxdp",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d13.mm2_rxdm",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d14.mm2_rxrcv",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcspi2_cs1.mm2_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d15.mm2_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcspi1_cs3.mm2_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port2_4pin_pads[] __initdata = {
+ {
+ .name = "etk_d14.mm2_rxrcv",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcspi2_cs1.mm2_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d15.mm2_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcspi1_cs3.mm2_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port2_3pin_pads[] __initdata = {
+ {
+ .name = "mcspi2_cs1.mm2_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "etk_d15.mm2_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcspi1_cs3.mm2_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port2_2pin_pads[] __initdata = {
+ {
+ .name = "etk_d15.mm2_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+ {
+ .name = "mcspi1_cs3.mm2_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE5,
+ },
+};
+
+static struct omap_device_pad omap3_port3_6pin_pads[] __initdata = {
+ {
+ .name = "sdmmc2_dat5.mm3_rxdp",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "sdmmc2_dat7.mm3_rxdm",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_dr.mm3_rxrcv",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_fsx.mm3_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_clkx.mm3_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_dx.mm3_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+};
+
+static struct omap_device_pad omap3_port3_4pin_pads[] __initdata = {
+ {
+ .name = "mcbsp4_dr.mm3_rxrcv",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_fsx.mm3_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_clkx.mm3_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_dx.mm3_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+};
+
+static struct omap_device_pad omap3_port3_3pin_pads[] __initdata = {
+ {
+ .name = "mcbsp4_fsx.mm3_txen_n",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_clkx.mm3_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_dx.mm3_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+};
+
+static struct omap_device_pad omap3_port3_2pin_pads[] __initdata = {
+ {
+ .name = "mcbsp4_clkx.mm3_txse0",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+ {
+ .name = "mcbsp4_dx.mm3_txdat",
+ .enable = OMAP_PIN_INPUT_PULLDOWN | OMAP_MUX_MODE6,
+ },
+};
+
/* MUX settings for EHCI pins */
/*
* setup_ehci_io_mux - initialize IO pad mux for USBHOST
*/
-static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode,
+ struct omap_board_data *bdata)
{
switch (port_mode[0]) {
case OMAP_EHCI_PORT_MODE_PHY:
- omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port1_phy_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port1_phy_pads);
break;
case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("hsusb1_tll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hsusb1_tll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb1_tll_data7",
- OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port1_tll_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port1_tll_pads);
break;
case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
default:
break;
}
-
switch (port_mode[1]) {
case OMAP_EHCI_PORT_MODE_PHY:
- omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_data7",
- OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port2_phy_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port2_phy_pads);
break;
case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("hsusb2_tll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hsusb2_tll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb2_tll_data7",
- OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port2_tll_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port2_tll_pads);
break;
case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
default:
break;
}
-
switch (port_mode[2]) {
case OMAP_EHCI_PORT_MODE_PHY:
printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
break;
case OMAP_EHCI_PORT_MODE_TLL:
- omap_mux_init_signal("hsusb3_tll_stp",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hsusb3_tll_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hsusb3_tll_data7",
- OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port3_tll_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port3_tll_pads);
break;
case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
default:
break;
}
-
- return;
}
static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode,
@@ -579,98 +953,92 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode,
}
}
-static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode,
+ struct omap_board_data *bdata)
{
switch (port_mode[0]) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("mm1_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm1_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port1_6pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port1_6pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("mm1_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port1_4pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port1_4pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port1_3pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port1_3pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("mm1_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm1_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port1_2pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port1_2pin_pads);
break;
+
case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
default:
break;
}
+
switch (port_mode[1]) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("mm2_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm2_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port2_6pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port2_6pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("mm2_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port2_4pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port2_4pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port2_3pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port2_3pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("mm2_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm2_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port2_2pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port2_3pin_pads);
break;
+
case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
default:
break;
}
+
switch (port_mode[2]) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
- omap_mux_init_signal("mm3_rxdp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm3_rxdm",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port3_6pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port3_6pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
- omap_mux_init_signal("mm3_rxrcv",
- OMAP_PIN_INPUT_PULLDOWN);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port3_4pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port3_4pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
- omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
- /* FALLTHROUGH */
+ bdata->pads = omap3_port3_3pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port3_3pin_pads);
+ break;
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
- omap_mux_init_signal("mm3_txse0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("mm3_txdat",
- OMAP_PIN_INPUT_PULLDOWN);
+ bdata->pads = omap3_port3_2pin_pads;
+ bdata->pads_cnt = ARRAY_SIZE(omap3_port3_2pin_pads);
break;
+
case OMAP_USBHS_PORT_MODE_UNUSED:
- /* FALLTHROUGH */
default:
break;
}
@@ -785,8 +1153,12 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
}
if (cpu_is_omap34xx()) {
- setup_ehci_io_mux(pdata->port_mode);
- setup_ohci_io_mux(pdata->port_mode);
+ setup_ehci_io_mux(pdata->port_mode, &bdata);
+ oh[2]->mux = omap_hwmod_mux_init((&bdata)->pads,
+ bdata.pads_cnt);
+ setup_ohci_io_mux(pdata->port_mode, &bdata);
+ oh[1]->mux = omap_hwmod_mux_init((&bdata)->pads,
+ bdata.pads_cnt);
} else if (cpu_is_omap44xx()) {
setup_4430ehci_io_mux(pdata->port_mode, &bdata);
oh[2]->mux = omap_hwmod_mux_init((&bdata)->pads,
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists