| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1314948813-3583-1-git-send-email-ravishankar.km@greenturtles.in>
Date: Fri, 2 Sep 2011 13:03:33 +0530
From: Ravishankar K Mallikarjunayya <ravishankar.km@...enturtles.in>
To: gregkh@...e.de, wfp5p@...ginia.edu
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Ravishankar K Mallikarjunayya <ravishankar.km@...enturtles.in>
Subject: [PATCH 1/1] Staging: comedi: fix line over 80 character issue in usbduxfast.c
This is a patch to the usbduxfast.c file that fixes up a line 0ver 80 character warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar K Mallikarjunayya <ravishankar.km@...enturtles.in>
---
drivers/staging/comedi/drivers/usbduxfast.c | 47 ++++++++++++++------------
1 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 2a8e725..62ca2a3 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -453,14 +453,15 @@ static int usbduxfastsub_start(struct usbduxfastsub_s *udfs)
/* 7f92 to zero */
local_transfer_buffer[0] = 0;
/* bRequest, "Firmware" */
- ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
- VENDOR_DIR_OUT, /* bmRequestType */
- USBDUXFASTSUB_CPUCS, /* Value */
- 0x0000, /* Index */
- /* address of the transfer buffer */
- local_transfer_buffer,
- 1, /* Length */
- EZTIMEOUT); /* Timeout */
+ ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+ USBDUXFASTSUB_FIRMWARE,
+ VENDOR_DIR_OUT, /* bmRequestType */
+ USBDUXFASTSUB_CPUCS, /* Value */
+ 0x0000, /* Index */
+ /* address of the transfer buffer */
+ local_transfer_buffer,
+ 1, /* Length */
+ EZTIMEOUT); /* Timeout */
if (ret < 0) {
printk("comedi_: usbduxfast_: control msg failed (start)\n");
return ret;
@@ -477,12 +478,13 @@ static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
/* 7f92 to one */
local_transfer_buffer[0] = 1;
/* bRequest, "Firmware" */
- ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
- VENDOR_DIR_OUT, /* bmRequestType */
- USBDUXFASTSUB_CPUCS, /* Value */
- 0x0000, /* Index */
- local_transfer_buffer, 1, /* Length */
- EZTIMEOUT); /* Timeout */
+ ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+ USBDUXFASTSUB_FIRMWARE,
+ VENDOR_DIR_OUT, /* bmRequestType */
+ USBDUXFASTSUB_CPUCS, /* Value */
+ 0x0000, /* Index */
+ local_transfer_buffer, 1, /* Length */
+ EZTIMEOUT); /* Timeout */
if (ret < 0) {
printk(KERN_ERR "comedi_: usbduxfast: control msg failed "
"(stop)\n");
@@ -504,14 +506,15 @@ static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
startAddr, local_transfer_buffer[0]);
#endif
/* brequest, firmware */
- ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
- VENDOR_DIR_OUT, /* bmRequestType */
- startAddr, /* value */
- 0x0000, /* index */
- /* our local safe buffer */
- local_transfer_buffer,
- len, /* length */
- EZTIMEOUT); /* timeout */
+ ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+ USBDUXFASTSUB_FIRMWARE,
+ VENDOR_DIR_OUT, /* bmRequestType */
+ startAddr, /* value */
+ 0x0000, /* index */
+ /* our local safe buffer */
+ local_transfer_buffer,
+ len, /* length */
+ EZTIMEOUT); /* timeout */
#ifdef CONFIG_COMEDI_DEBUG
printk(KERN_DEBUG "comedi_: usbduxfast: result=%d\n", ret);
--
1.6.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists