[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20110906234531.5b79867f@lxorguk.ukuu.org.uk>
Date: Tue, 6 Sep 2011 23:45:31 +0100
From: Alan Cox <alan@...rguk.ukuu.org.uk>
To: Dan McGee <dpmcgee@...il.com>
Cc: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
Jeff Garzik <jgarzik@...ox.com>,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: Re: [PATCH] pata_sis: enable MWDMA for UDMA 133 chipset
On Tue, 6 Sep 2011 16:09:18 -0500
Dan McGee <dpmcgee@...il.com> wrote:
> This ports the timing values over from the old IDE driver into the new
> PATA-based one. The comment was lying when it stated the old driver was
> not MWDMA capable.
The comment was correct when the driver work was done, but Bartlomiej
then sorted out the old driver.
>
> Boot tested on actual hardware using 'libata.force=mwdma2'.
Excellent - looks good to me.
>
> Signed-off-by: Dan McGee <dpmcgee@...il.com>
> ---
> drivers/ata/pata_sis.c | 27 +++++++++++++++++----------
> 1 files changed, 17 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
> index 810b7d6..9f11a8e 100644
> --- a/drivers/ata/pata_sis.c
> +++ b/drivers/ata/pata_sis.c
> @@ -293,14 +293,14 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
> u32 t1;
> int speed = adev->pio_mode - XFER_PIO_0;
>
> - const u32 timing133[] = {
> + static const u32 timing133[] = {
> 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */
> 0x0C266000,
> 0x04263000,
> 0x0C0A3000,
> 0x05093000
> };
> - const u32 timing100[] = {
> + static const u32 timing100[] = {
> 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */
> 0x091C4000,
> 0x031C2000,
> @@ -485,21 +485,28 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
> int port;
> u32 t1;
>
> - /* bits 4- cycle time 8 - cvs time */
> - static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
> - static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
> -
> port = sis_port_base(adev);
> pci_read_config_dword(pdev, port, &t1);
>
> if (adev->dma_mode < XFER_UDMA_0) {
> + /* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */
> + static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 };
> + static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 };
> + int speed = adev->dma_mode - XFER_MW_DMA_0;
> + t1 &= 0xC0C00FFF;
> + /* disable UDMA */
> t1 &= ~0x00000004;
> - /* FIXME: need data sheet to add MWDMA here. Also lacking on
> - ide/pci driver */
> + if (t1 & 0x08)
> + t1 |= timing_u133[speed];
> + else
> + t1 |= timing_u100[speed];
> } else {
> + /* bits 4- cycle time 8 - cvs time */
> + static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
> + static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
> int speed = adev->dma_mode - XFER_UDMA_0;
> - /* if & 8 no UDMA133 - need info for ... */
> t1 &= ~0x00000FF0;
> + /* enable UDMA */
> t1 |= 0x00000004;
> if (t1 & 0x08)
> t1 |= timing_u133[speed];
> @@ -620,7 +627,7 @@ static const struct ata_port_info sis_info100_early = {
> static const struct ata_port_info sis_info133 = {
> .flags = ATA_FLAG_SLAVE_POSS,
> .pio_mask = ATA_PIO4,
> - /* No MWDMA */
> + .mwdma_mask = ATA_MWDMA2,
> .udma_mask = ATA_UDMA6,
> .port_ops = &sis_133_ops,
> };
--
--
"Alan, I'm getting a bit worried about you."
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists