| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1315997270-14332-1-git-send-email-keguang.zhang@gmail.com>
Date: Wed, 14 Sep 2011 18:47:50 +0800
From: keguang.zhang@...il.com
To: linux-mips@...ux-mips.org, linux-kernel@...r.kernel.org
Cc: ralf@...ux-mips.org, wuzhangjin@...il.com, r0bertz@...too.org,
chenj@...ote.com, "Zhang, Keguang" <keguang.zhang@...il.com>
Subject: [PATCH] MIPS: Add basic support for Loongson1B
From: Zhang, Keguang <keguang.zhang@...il.com>
This patch adds basic support for Loongson1B
including serial, timer and interrupt handler.
Loongson 1B is a 32-bit SoC designed by Institute of
Computing Technology (ICT), Chinese Academy of Sciences (CAS),
which implements the MIPS32 release 2 instruction set.
Signed-off-by: Zhang, Keguang <keguang.zhang@...il.com>
---
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 31 +
arch/mips/configs/ls1b_defconfig | 830 ++++++++++++++++++++++
arch/mips/include/asm/bootinfo.h | 3 +-
arch/mips/include/asm/cpu.h | 3 +-
arch/mips/include/asm/mach-loongson1/irq.h | 70 ++
arch/mips/include/asm/mach-loongson1/loongson1.h | 48 ++
arch/mips/include/asm/mach-loongson1/platform.h | 20 +
arch/mips/include/asm/mach-loongson1/prom.h | 24 +
arch/mips/include/asm/mach-loongson1/regs-clk.h | 32 +
arch/mips/include/asm/mach-loongson1/regs-intc.h | 24 +
arch/mips/include/asm/mach-loongson1/regs-wdt.h | 21 +
arch/mips/include/asm/mach-loongson1/war.h | 25 +
arch/mips/include/asm/module.h | 2 +
arch/mips/kernel/cpu-probe.c | 15 +
arch/mips/kernel/perf_event_mipsxx.c | 6 +
arch/mips/kernel/traps.c | 1 +
arch/mips/loongson1/Kconfig | 29 +
arch/mips/loongson1/Makefile | 11 +
arch/mips/loongson1/Platform | 7 +
arch/mips/loongson1/common/Makefile | 5 +
arch/mips/loongson1/common/clock.c | 164 +++++
arch/mips/loongson1/common/irq.c | 132 ++++
arch/mips/loongson1/common/platform.c | 50 ++
arch/mips/loongson1/common/prom.c | 89 +++
arch/mips/loongson1/common/reset.c | 48 ++
arch/mips/loongson1/common/setup.c | 32 +
arch/mips/loongson1/ls1b/Makefile | 5 +
arch/mips/loongson1/ls1b/board.c | 30 +
arch/mips/oprofile/common.c | 1 +
arch/mips/oprofile/op_model_mipsxx.c | 4 +
31 files changed, 1761 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/configs/ls1b_defconfig
create mode 100644 arch/mips/include/asm/mach-loongson1/irq.h
create mode 100644 arch/mips/include/asm/mach-loongson1/loongson1.h
create mode 100644 arch/mips/include/asm/mach-loongson1/platform.h
create mode 100644 arch/mips/include/asm/mach-loongson1/prom.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-clk.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-intc.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-wdt.h
create mode 100644 arch/mips/include/asm/mach-loongson1/war.h
create mode 100644 arch/mips/loongson1/Kconfig
create mode 100644 arch/mips/loongson1/Makefile
create mode 100644 arch/mips/loongson1/Platform
create mode 100644 arch/mips/loongson1/common/Makefile
create mode 100644 arch/mips/loongson1/common/clock.c
create mode 100644 arch/mips/loongson1/common/irq.c
create mode 100644 arch/mips/loongson1/common/platform.c
create mode 100644 arch/mips/loongson1/common/prom.c
create mode 100644 arch/mips/loongson1/common/reset.c
create mode 100644 arch/mips/loongson1/common/setup.c
create mode 100644 arch/mips/loongson1/ls1b/Makefile
create mode 100644 arch/mips/loongson1/ls1b/board.c
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5ce8029..d64786d 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -14,6 +14,7 @@ platforms += jz4740
platforms += lantiq
platforms += lasat
platforms += loongson
+platforms += loongson1
platforms += mipssim
platforms += mti-malta
platforms += netlogic
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b122adc..d693f48 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -259,6 +259,17 @@ config MACH_LOONGSON
Chinese Academy of Sciences (CAS) in the People's Republic
of China. The chief architect is Professor Weiwu Hu.
+config MACH_LOONGSON1
+ bool "Loongson1 family of machines"
+ select SYS_SUPPORTS_ZBOOT
+ help
+ This enables the support of Loongson1 family of machines.
+
+ Loongson1 is a family of 32-bit MIPS-compatible SoCs.
+ developed at Institute of Computing Technology (ICT),
+ Chinese Academy of Sciences (CAS) in the People's Republic
+ of China.
+
config MIPS_MALTA
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
@@ -804,6 +815,7 @@ source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson/Kconfig"
+source "arch/mips/loongson1/Kconfig"
source "arch/mips/netlogic/Kconfig"
endmenu
@@ -1197,6 +1209,14 @@ config CPU_LOONGSON2F
have a similar programming interface with FPGA northbridge used in
Loongson2E.
+config CPU_LOONGSON1B
+ bool "Loongson 1B"
+ depends on SYS_HAS_CPU_LOONGSON1B
+ select CPU_LOONGSON1
+ help
+ The Loongson 1B is a 32-bit SoC, which implements the MIPS32 release 2
+ instruction set.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1525,6 +1545,14 @@ config CPU_LOONGSON2
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON1
+ bool
+ select CPU_MIPS32
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
config SYS_HAS_CPU_LOONGSON2E
bool
@@ -1534,6 +1562,9 @@ config SYS_HAS_CPU_LOONGSON2F
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
select CPU_SUPPORTS_UNCACHED_ACCELERATED
+config SYS_HAS_CPU_LOONGSON1B
+ bool
+
config SYS_HAS_CPU_MIPS32_R1
bool
diff --git a/arch/mips/configs/ls1b_defconfig b/arch/mips/configs/ls1b_defconfig
new file mode 100644
index 0000000..6463311
--- /dev/null
+++ b/arch/mips/configs/ls1b_defconfig
@@ -0,0 +1,830 @@
+#
+# Automatically generated make config: don't edit
+# Linux/mips 3.0.3 Kernel Configuration
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_ATH79 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_JZ4740 is not set
+# CONFIG_LANTIQ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+CONFIG_MACH_LOONGSON1=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_NLM_XLR_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_LOONGSON1_LS1B=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_LOONGSON1B=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_CPU_LOONGSON1=y
+CONFIG_SYS_HAS_CPU_LOONGSON1B=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_HIGHMEM is not set
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+# CONFIG_USE_OF is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_DNS_RESOLVER is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+# CONFIG_DEVKMEM is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_RAMOOPS=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+# CONFIG_KGDB_TESTS is not set
+CONFIG_KGDB_LOW_LEVEL_TRAP=y
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_DEBUG_ZBOOT is not set
+# CONFIG_SPINLOCK_TEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 35cd1ba..f850b88 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -69,7 +69,8 @@
#define MACH_DEXXON_GDIUM2F10 5
#define MACH_LEMOTE_NAS 6
#define MACH_LEMOTE_LL2F 7
-#define MACH_LOONGSON_END 8
+#define MACH_LOONGSON_LS1B 8
+#define MACH_LOONGSON_END 9
/*
* Valid machtype for group INGENIC
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 5f95a4b..975f372 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -191,6 +191,7 @@
#define PRID_REV_34K_V1_0_2 0x0022
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
+#define PRID_REV_LOONGSON1B 0x0020
/*
* Older processors used to encode processor version and revision in two
@@ -253,7 +254,7 @@ enum cpu_type_enum {
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1,
/*
* MIPS64 class processors
diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson1/irq.h
new file mode 100644
index 0000000..44cec4a
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/irq.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Register mappings for Loongson1.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_IRQ_H
+#define __ASM_MACH_LOONGSON1_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE 0
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
+#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
+#define INT0_IRQ MIPS_CPU_IRQ(2)
+#define INT1_IRQ MIPS_CPU_IRQ(3)
+#define INT2_IRQ MIPS_CPU_IRQ(4)
+#define INT3_IRQ MIPS_CPU_IRQ(5)
+#define INT4_IRQ MIPS_CPU_IRQ(6)
+#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
+
+/*
+ * INT0~3 Interrupt Numbers
+ */
+#define LOONGSON1_IRQ_BASE 8
+#define LOONGSON1_IRQ(n,x) (LOONGSON1_IRQ_BASE + (n << 5) + (x))
+
+#define LOONGSON1_UART0_IRQ LOONGSON1_IRQ(0,2)
+#define LOONGSON1_UART1_IRQ LOONGSON1_IRQ(0,3)
+#define LOONGSON1_UART2_IRQ LOONGSON1_IRQ(0,4)
+#define LOONGSON1_UART3_IRQ LOONGSON1_IRQ(0,5)
+#define LOONGSON1_CAN0_IRQ LOONGSON1_IRQ(0,6)
+#define LOONGSON1_CAN1_IRQ LOONGSON1_IRQ(0,7)
+#define LOONGSON1_SPI0_IRQ LOONGSON1_IRQ(0,8)
+#define LOONGSON1_SPI1_IRQ LOONGSON1_IRQ(0,9)
+#define LOONGSON1_AC97_IRQ LOONGSON1_IRQ(0,10)
+#define LOONGSON1_DMA0_IRQ LOONGSON1_IRQ(0,13)
+#define LOONGSON1_DMA1_IRQ LOONGSON1_IRQ(0,14)
+#define LOONGSON1_DMA2_IRQ LOONGSON1_IRQ(0,15)
+#define LOONGSON1_PWM0_IRQ LOONGSON1_IRQ(0,17)
+#define LOONGSON1_PWM1_IRQ LOONGSON1_IRQ(0,18)
+#define LOONGSON1_PWM2_IRQ LOONGSON1_IRQ(0,19)
+#define LOONGSON1_PWM3_IRQ LOONGSON1_IRQ(0,20)
+#define LOONGSON1_RTC_INT0_IRQ LOONGSON1_IRQ(0,21)
+#define LOONGSON1_RTC_INT1_IRQ LOONGSON1_IRQ(0,22)
+#define LOONGSON1_RTC_INT2_IRQ LOONGSON1_IRQ(0,23)
+#define LOONGSON1_TOY_INT0_IRQ LOONGSON1_IRQ(0,24)
+#define LOONGSON1_TOY_INT1_IRQ LOONGSON1_IRQ(0,25)
+#define LOONGSON1_TOY_INT2_IRQ LOONGSON1_IRQ(0,26)
+#define LOONGSON1_RTC_TICK_IRQ LOONGSON1_IRQ(0,27)
+#define LOONGSON1_TOY_TICK_IRQ LOONGSON1_IRQ(0,28)
+#define LOONGSON1_UART4_IRQ LOONGSON1_IRQ(0,29)
+#define LOONGSON1_UART5_IRQ LOONGSON1_IRQ(0,30)
+
+#define LOONGSON1_OHCI_IRQ LOONGSON1_IRQ(1,0)
+#define LOONGSON1_EHCI_IRQ LOONGSON1_IRQ(1,1)
+#define LOONGSON1_GMAC0_IRQ LOONGSON1_IRQ(1,2)
+#define LOONGSON1_GMAC1_IRQ LOONGSON1_IRQ(1,3)
+
+#define NR_IRQS LOONGSON1_GMAC1_IRQ
+
+#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
new file mode 100644
index 0000000..3df4f5d
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Register mappings for Loongson1.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
+#define __ASM_MACH_LOONGSON1_LOONGSON1_H
+
+#define DEFAULT_MEMSIZE (256) /* If no memsize provided */
+
+/* Loongson1 Register Bases */
+/* All regs are accessed in KSEG1 */
+#define LOONGSON1_REGBASE (0xa0000000ul + 0x1fe00000ul)
+
+#define LOONGSON1_INTC_BASE (0xbfd01040)
+#define LOONGSON1_USB_BASE (0xbfe00000)
+#define LOONGSON1_GMAC0_BASE (0xbfe10000)
+#define LOONGSON1_GMAC1_BASE (0xbfe20000)
+#define LOONGSON1_UART0_BASE (0xbfe40000)
+#define LOONGSON1_UART1_BASE (0xbfe44000)
+#define LOONGSON1_UART2_BASE (0xbfe48000)
+#define LOONGSON1_UART3_BASE (0xbfe4c000)
+#define LOONGSON1_UART4_BASE (0xbfe6c000)
+#define LOONGSON1_UART5_BASE (0xbfe7c000)
+#define LOONGSON1_CAN0_BASE (0xbfe50000)
+#define LOONGSON1_CAN1_BASE (0xbfe54000)
+#define LOONGSON1_I2C0_BASE (0xbfe58000)
+#define LOONGSON1_I2C1_BASE (0xbfe68000)
+#define LOONGSON1_I2C2_BASE (0xbfe70000)
+#define LOONGSON1_PWM_BASE (0xbfe5c000)
+#define LOONGSON1_WDT_BASE (0xbfe5c060)
+#define LOONGSON1_RTC_BASE (0xbfe64000)
+#define LOONGSON1_AC97_BASE (0xbfe74000)
+#define LOONGSON1_NAND_BASE (0xbfe78000)
+#define LOONGSON1_CLK_BASE (0xbfe78030)
+
+#include <regs-clk.h>
+#include <regs-intc.h>
+#include <regs-wdt.h>
+
+#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h
new file mode 100644
index 0000000..f9e3a9e
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/platform.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
+#define __ASM_MACH_LOONGSON1_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device loongson1_uart_device;
+
+void loongson1_serial_setup(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson1/prom.h
new file mode 100644
index 0000000..b871dc4
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/prom.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_PROM_H
+#define __ASM_MACH_LOONGSON1_PROM_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+/* environment arguments from bootloader */
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern char *prom_getenv(char *name);
+extern void __init prom_init_cmdline(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PROM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h
new file mode 100644
index 0000000..acffd4f
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Loongson1 Clock Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
+#define __ASM_MACH_LOONGSON1_REGS_CLK_H
+
+#define LOONGSON1_CLK_REG(x) ((void __iomem *)(LOONGSON1_CLK_BASE + (x)))
+
+#define CLK_PLL_FREQ LOONGSON1_CLK_REG(0x0)
+#define CLK_PLL_DIV LOONGSON1_CLK_REG(0x4)
+
+/* Clock PLL Divisor Register Bits */
+#define DIV_DC_EN (0x1 << 31)
+#define DIV_DC (0x1f << 26)
+#define DIV_CPU_EN (0x1 << 25)
+#define DIV_CPU (0x1f << 20)
+#define DIV_DDR_EN (0x1 << 19)
+#define DIV_DDR (0x1f << 14)
+
+#define DIV_DC_SHIFT (26)
+#define DIV_CPU_SHIFT (20)
+#define DIV_DDR_SHIFT (14)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-intc.h b/arch/mips/include/asm/mach-loongson1/regs-intc.h
new file mode 100644
index 0000000..783eb54
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-intc.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Loongson1 Interrupt register definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_INTC_H
+#define __ASM_MACH_LOONGSON1_REGS_INTC_H
+
+#define LOONGSON1_INTC_REG(x) ((void __iomem *)(LOONGSON1_INTC_BASE + n * 0x18 + x))
+
+#define INTC_INTISR(n) LOONGSON1_INTC_REG(0x0)
+#define INTC_INTIEN(n) LOONGSON1_INTC_REG(0x4)
+#define INTC_INTSET(n) LOONGSON1_INTC_REG(0x8)
+#define INTC_INTCLR(n) LOONGSON1_INTC_REG(0xc)
+#define INTC_INTPOL(n) LOONGSON1_INTC_REG(0x10)
+#define INTC_INTEDGE(n) LOONGSON1_INTC_REG(0x14)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_INTC_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
new file mode 100644
index 0000000..ae04f08
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Loongson1 Watchdog register definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
+#define __ASM_MACH_LOONGSON1_REGS_WDT_H
+
+#define LOONGSON1_WDT_REG(x) ((void __iomem *)(LOONGSON1_WDT_BASE + (x)))
+
+#define WDT_EN LOONGSON1_WDT_REG(0x0)
+#define WDT_SET LOONGSON1_WDT_REG(0x4)
+#define WDT_TIMER LOONGSON1_WDT_REG(0x8)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
diff --git a/arch/mips/include/asm/mach-loongson1/war.h b/arch/mips/include/asm/mach-loongson1/war.h
new file mode 100644
index 0000000..e3680a8
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@...ux-mips.org>
+ */
+#ifndef __ASM_MACH_LOONGSON1_WAR_H
+#define __ASM_MACH_LOONGSON1_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MACH_LOONGSON1_WAR_H */
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index bc01a02..b53d642 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -116,6 +116,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "SB1 "
#elif defined CONFIG_CPU_LOONGSON2
#define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_LOONGSON1
+#define MODULE_PROC_FAMILY "LOONGSON1 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
#define MODULE_PROC_FAMILY "OCTEON "
#elif defined CONFIG_CPU_XLR
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index ebc0cd2..c886e0d 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -37,6 +37,8 @@
void (*cpu_wait)(void);
EXPORT_SYMBOL(cpu_wait);
+static void __cpuinit decode_configs(struct cpuinfo_mips *c);
+
static void r3081_wait(void)
{
unsigned long cfg = read_c0_conf();
@@ -190,6 +192,7 @@ void __init check_wait(void)
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
case CPU_JZRISC:
+ case CPU_LOONGSON1:
cpu_wait = r4k_wait;
break;
@@ -635,6 +638,18 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
MIPS_CPU_32FPR;
c->tlbsize = 64;
break;
+ case PRID_IMP_LOONGSON1:
+ decode_configs(c);
+
+ c->cputype = CPU_LOONGSON1;
+
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ __cpu_name[cpu] = "Loongson 1B";
+ break;
+ }
+
+ break;
}
}
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index e5ad09a..e316b0e 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1062,6 +1062,12 @@ init_hw_perf_events(void)
mipsxxcore_pmu.irq = irq;
mipspmu = &mipsxxcore_pmu;
break;
+ case CPU_LOONGSON1:
+ mipsxxcore_pmu.name = "mips/loongson1";
+ mipsxxcore_pmu.num_counters = counters;
+ mipsxxcore_pmu.irq = irq;
+ mipspmu = &mipsxxcore_pmu;
+ break;
default:
pr_cont("Either hardware does not support performance "
"counters, or not yet implemented.\n");
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 01eff7e..cd55823 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1241,6 +1241,7 @@ static inline void parity_protection_init(void)
break;
case CPU_5KC:
+ case CPU_LOONGSON1:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig
new file mode 100644
index 0000000..c22ceac
--- /dev/null
+++ b/arch/mips/loongson1/Kconfig
@@ -0,0 +1,29 @@
+if MACH_LOONGSON1
+
+choice
+ prompt "Machine Type"
+
+config LOONGSON1_LS1B
+ bool "Loongson LS1B board"
+ select ARCH_SPARSEMEM_ENABLE
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_LOONGSON1B
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+# select USB_ARCH_HAS_OHCI
+# select USB_ARCH_HAS_EHCI
+
+endchoice
+
+#config LOONGSON_SUSPEND
+# bool
+# default y
+# depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
+
+endif # MACH_LOONGSON1
diff --git a/arch/mips/loongson1/Makefile b/arch/mips/loongson1/Makefile
new file mode 100644
index 0000000..e9123c2
--- /dev/null
+++ b/arch/mips/loongson1/Makefile
@@ -0,0 +1,11 @@
+#
+# Common code for all Loongson1 based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON1) += common/
+
+#
+# Loongson LS1B board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson1/Platform
new file mode 100644
index 0000000..92804c6
--- /dev/null
+++ b/arch/mips/loongson1/Platform
@@ -0,0 +1,7 @@
+cflags-$(CONFIG_CPU_LOONGSON1) += \
+ $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+ -Wa,-mips32r2 -Wa,--trap
+
+platform-$(CONFIG_MACH_LOONGSON1) += loongson1/
+cflags-$(CONFIG_MACH_LOONGSON1) += -I$(srctree)/arch/mips/include/asm/mach-loongson1
+load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80010000
diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson1/common/Makefile
new file mode 100644
index 0000000..b279770
--- /dev/null
+++ b/arch/mips/loongson1/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for common code of loongson1 based machines.
+#
+
+obj-y += clock.o irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
new file mode 100644
index 0000000..e854953
--- /dev/null
+++ b/arch/mips/loongson1/common/clock.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/time.h>
+
+#include <loongson1.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static void pll_clk_init(struct clk *clk)
+{
+ u32 pll;
+
+ pll = __raw_readl(CLK_PLL_FREQ);
+ clk->rate = (12 + (pll & 0x3f)) * 33 / 2 + ((pll >>8 ) & 0x3ff) * 33 / 1024 / 2;
+ clk->rate *= 1000000;
+}
+
+static void cpu_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(CLK_PLL_DIV) & DIV_CPU;
+ clk->rate = pll / (ctrl >> DIV_CPU_SHIFT);
+}
+
+static void ddr_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(CLK_PLL_DIV) & DIV_DDR;
+ clk->rate = pll / (ctrl >> DIV_DDR_SHIFT);
+}
+
+static void dc_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(CLK_PLL_DIV) & DIV_DC;
+ clk->rate = pll / (ctrl >> DIV_DC_SHIFT);
+}
+
+static struct clk_ops pll_clk_ops = {
+ .init = pll_clk_init,
+};
+
+static struct clk_ops cpu_clk_ops = {
+ .init = cpu_clk_init,
+};
+
+static struct clk_ops ddr_clk_ops = {
+ .init = ddr_clk_init,
+};
+
+static struct clk_ops dc_clk_ops = {
+ .init = dc_clk_init,
+};
+
+static struct clk pll_clk = {
+ .name = "pll",
+ .ops = &pll_clk_ops,
+};
+
+static struct clk cpu_clk = {
+ .name = "cpu",
+ .parent = &pll_clk,
+ .ops = &cpu_clk_ops,
+};
+
+static struct clk ddr_clk = {
+ .name = "ddr",
+ .parent = &pll_clk,
+ .ops = &ddr_clk_ops,
+};
+
+static struct clk dc_clk = {
+ .name = "dc",
+ .parent = &pll_clk,
+ .ops = &dc_clk_ops,
+};
+
+int clk_register(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->node, &clocks);
+ if (clk->ops->init)
+ clk->ops->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+static struct clk *loongson1_clks[] = {
+ &pll_clk,
+ &cpu_clk,
+ &ddr_clk,
+ &dc_clk,
+};
+
+int __init loongson1_clock_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(loongson1_clks); i++)
+ clk_register(loongson1_clks[i]);
+
+ return 0;
+}
+
+void __init plat_time_init(void)
+{
+ struct clk *clk;
+
+ /* Initialize loongson1 clocks */
+ loongson1_clock_init();
+
+ /* setup mips r4k timer */
+ clk = clk_get(NULL, "cpu");
+ if (IS_ERR(clk))
+ panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+}
diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson1/common/irq.c
new file mode 100644
index 0000000..8a7287f
--- /dev/null
+++ b/arch/mips/loongson1/common/irq.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Based on Copyright (C) 2009 Lemote Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq_cpu.h>
+
+#include <loongson1.h>
+#include <irq.h>
+
+static void loongson1_irq_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(INTC_INTCLR(n)) | (1 << bit), INTC_INTCLR(n));
+}
+
+static void loongson1_irq_mask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(INTC_INTIEN(n)) & ~(1 << bit), INTC_INTIEN(n));
+}
+
+static void loongson1_irq_mask_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(INTC_INTIEN(n)) & ~(1 << bit), INTC_INTIEN(n));
+ __raw_writel(__raw_readl(INTC_INTCLR(n)) | (1 << bit), INTC_INTCLR(n));
+}
+
+static void loongson1_irq_unmask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(INTC_INTIEN(n)) | (1 << bit), INTC_INTIEN(n));
+}
+
+static struct irq_chip loongson1_irq_chip = {
+ .name = "LOONGSON1-INTC",
+ .irq_ack = loongson1_irq_ack,
+ .irq_mask = loongson1_irq_mask,
+ .irq_mask_ack = loongson1_irq_mask_ack,
+ .irq_unmask = loongson1_irq_unmask,
+};
+
+static void loongson1_irq_dispatch(int n)
+{
+ u32 int_status, irq;
+
+ /* Get pending sources, masked by current enables */
+ int_status = __raw_readl(INTC_INTISR(n)) &
+ __raw_readl(INTC_INTIEN(n));
+
+ if (int_status) {
+ irq = LOONGSON1_IRQ(n, __ffs(int_status));
+ do_IRQ(irq);
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ if (pending & CAUSEF_IP7)
+ do_IRQ(TIMER_IRQ);
+ else if (pending & CAUSEF_IP2)
+ loongson1_irq_dispatch(0); /* INT0 */
+ else if (pending & CAUSEF_IP3)
+ loongson1_irq_dispatch(1); /* INT1 */
+ else if (pending & CAUSEF_IP4)
+ loongson1_irq_dispatch(2); /* INT2 */
+ else if (pending & CAUSEF_IP5)
+ loongson1_irq_dispatch(3); /* INT3 */
+ else if (pending & CAUSEF_IP6)
+ loongson1_irq_dispatch(4); /* INT4 */
+ else
+ spurious_interrupt();
+
+}
+
+struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+static void __init loongson1_irq_init(int base)
+{
+ int n;
+
+ /* Disable interrupts and clear pending,
+ * setup all IRQs as high level triggered
+ */
+ for (n = 0; n < 4; n++) {
+ __raw_writel(0x0, INTC_INTIEN(n));
+ __raw_writel(0xffffffff, INTC_INTCLR(n));
+ __raw_writel(0xffffffff, INTC_INTPOL(n));
+ __raw_writel(0x0, INTC_INTEDGE(n));
+ }
+
+
+ for (n = base; n < NR_IRQS; n++) {
+ irq_set_chip_and_handler(n, &loongson1_irq_chip,
+ handle_level_irq);
+ }
+
+ setup_irq(INT0_IRQ, &cascade_irqaction);
+ setup_irq(INT1_IRQ, &cascade_irqaction);
+ setup_irq(INT2_IRQ, &cascade_irqaction);
+ setup_irq(INT3_IRQ, &cascade_irqaction);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ loongson1_irq_init(LOONGSON1_IRQ_BASE);
+}
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
new file mode 100644
index 0000000..baababb
--- /dev/null
+++ b/arch/mips/loongson1/common/platform.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/serial_8250.h>
+
+#include <loongson1.h>
+
+#define LOONGSON1_UART_PORT(_id) \
+ { \
+ .mapbase = LOONGSON1_UART ## _id ## _BASE, \
+ .membase = (void *)(LOONGSON1_UART ## _id ## _BASE), \
+ .irq = LOONGSON1_UART ## _id ## _IRQ, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ }
+
+static struct plat_serial8250_port loongson1_serial8250_port[] = {
+ LOONGSON1_UART_PORT(0),
+ {},
+};
+
+struct platform_device loongson1_uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = loongson1_serial8250_port,
+ },
+};
+
+void __init loongson1_serial_setup(void)
+{
+ struct clk *clk;
+ struct plat_serial8250_port *p;
+
+ clk = clk_get(NULL, "dc");
+ if (IS_ERR(clk))
+ panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+ for (p = loongson1_serial8250_port; p->flags != 0; ++p)
+ p->uartclk = clk_get_rate(clk);
+}
diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c
new file mode 100644
index 0000000..84a25f6
--- /dev/null
+++ b/arch/mips/loongson1/common/prom.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Based on Copyright (C) 2009 Lemote Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/bootinfo.h>
+
+#include <loongson1.h>
+#include <prom.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+unsigned long memsize, highmemsize;
+
+char *prom_getenv(char *envname)
+{
+ extern char **prom_envp;
+ char **env = prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while (*env) {
+ if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
+ return *env + i + 1;
+ env++;
+ }
+
+ return 0;
+}
+
+static inline unsigned long env_or_default(char *env, unsigned long dfl)
+{
+ char *str = prom_getenv(env);
+ return str ? simple_strtol(str, 0, 0) : dfl;
+}
+
+void __init prom_init_cmdline(void)
+{
+ char *c = &(arcs_cmdline[0]);
+ int i;
+
+ for (i = 1; i < prom_argc; i++) {
+ strcpy(c, prom_argv[i]);
+ c += strlen(prom_argv[i]);
+ if (i < prom_argc-1)
+ *c++ = ' ';
+ }
+ *c = 0;
+}
+
+void __init prom_init(void)
+{
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
+ highmemsize = env_or_default("highmemsize", 0x0);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+#define UART_BASE LOONGSON1_UART0_BASE
+#define PORT(base, offset) (u8 *)(base + offset)
+
+void __init prom_putchar(char c)
+{
+ int timeout;
+
+ timeout = 1024;
+
+ while (((readb(PORT(UART_BASE, UART_LSR)) & UART_LSR_THRE) == 0)
+ && (timeout-- > 0))
+ ;
+
+ writeb(c, PORT(UART_BASE, UART_TX));
+}
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
new file mode 100644
index 0000000..b34ad35
--- /dev/null
+++ b/arch/mips/loongson1/common/reset.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Based on Copyright (C) 2009 Lemote Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+#include <loongson1.h>
+
+static void loongson1_restart(char *command)
+{
+ __raw_writel(0x1, WDT_EN);
+ __raw_writel(0x5000000, WDT_TIMER);
+ __raw_writel(0x1, WDT_SET);
+}
+
+static void loongson1_halt(void)
+{
+ pr_notice("\n\n** You can safely turn off the power now **\n\n");
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+}
+
+static void loongson1_power_off(void)
+{
+ loongson1_halt();
+}
+
+static int __init loongson1_reboot_setup(void)
+{
+ _machine_restart = loongson1_restart;
+ _machine_halt = loongson1_halt;
+ pm_power_off = loongson1_power_off;
+
+ return 0;
+}
+
+arch_initcall(loongson1_reboot_setup);
diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c
new file mode 100644
index 0000000..2a978d2
--- /dev/null
+++ b/arch/mips/loongson1/common/setup.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * Based on Copyright (C) 2009 Lemote Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <prom.h>
+
+void __init plat_mem_setup(void)
+{
+ add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+}
+
+const char *get_system_type(void)
+{
+ unsigned int processor_id = (¤t_cpu_data)->processor_id;
+
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ return "LOONGSON LS1B";
+ default:
+ return "LOONGSON (unknown)";
+ }
+
+}
diff --git a/arch/mips/loongson1/ls1b/Makefile b/arch/mips/loongson1/ls1b/Makefile
new file mode 100644
index 0000000..891eac4
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c
new file mode 100644
index 0000000..b1a602f
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/board.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+#include <linux/serial_8250.h>
+#include <loongson1.h>
+
+static struct platform_device *loongson1_platform_devices[] __initdata = {
+ &loongson1_uart_device,
+};
+
+static int __init loongson1_platform_init(void)
+{
+ int err;
+
+ loongson1_serial_setup();
+
+ err = platform_add_devices(loongson1_platform_devices,
+ ARRAY_SIZE(loongson1_platform_devices));
+ return err;
+}
+
+arch_initcall(loongson1_platform_init);
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index d1f2d4c..99216f0 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -89,6 +89,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
+ case CPU_LOONGSON1:
lmodel = &op_model_mipsxx_ops;
break;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 54759f1..03be670 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -365,6 +365,10 @@ static int __init mipsxx_init(void)
op_model_mipsxx_ops.cpu_type = "mips/sb1";
break;
+ case CPU_LOONGSON1:
+ op_model_mipsxx_ops.cpu_type = "mips/loongson1";
+ break;
+
default:
printk(KERN_ERR "Profiling unsupported for this CPU\n");
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists