| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1316023462-3287-1-git-send-email-rklein@nvidia.com>
Date: Wed, 14 Sep 2011 11:04:22 -0700
From: Rhyland Klein <rklein@...dia.com>
To: Anton Vorontsov <cbouatmailru@...il.com>,
Grant Likely <grant.likely@...retlab.ca>
Cc: linux-kernel@...r.kernel.org, devicetree-discuss@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org,
Rhyland Klein <rklein@...dia.com>
Subject: [PATCH v4] power: bq20z75: devicetree init support
Adding support to generate platform data when kernel is configured
through device tree.
Also adding the binding for the TI bq20z75 fuel gadge and the
bq20z75 driver.
Signed-off-by: Rhyland Klein <rklein@...dia.com>
---
v2: Fixed typo in binding description
v3: Changed to use "ti," for properties
Changed to use single gpio entry for battery detect info.
Removed unnecessary call to of_match_device.
v4: squashed bindings and drivers changes together.
fixed case where CONFIG_OF is not selected, to return existing
pdata pointer if it exists.
.../bindings/power_supply/ti_bq20z75.txt | 23 ++++++
drivers/power/bq20z75.c | 75 ++++++++++++++++++++
2 files changed, 98 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
new file mode 100644
index 0000000..7571294
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
@@ -0,0 +1,23 @@
+TI bq20z75
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq20z75"
+
+Optional properties :
+ - ti,i2c-retry-count : The number of times to retry i2c transactions on i2c
+ IO failure.
+ - ti,poll-retry-count : The number of times to try looking for new status
+ after an external change notification.
+ - ti,battery-detect-gpios : The gpio which signals battery detection and
+ a flag specifying its polarity.
+
+Example:
+
+ bq20z75@b {
+ compatible = "ti,bq20z75";
+ reg = < 0xb >;
+ ti,i2c-retry-count = <2>;
+ ti,poll-retry-count = <10>;
+ ti,battery-detect-gpios = <&gpio-controller 122 1>;
+ }
diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
index 9c5e5be..4c4669e 100644
--- a/drivers/power/bq20z75.c
+++ b/drivers/power/bq20z75.c
@@ -613,6 +613,78 @@ static void bq20z75_delayed_work(struct work_struct *work)
}
}
+#if defined(CONFIG_OF)
+#include <linux/of_device.h>
+static const struct of_device_id bq20z75_dt_ids[] = {
+ { .compatible = "ti,bq20z75" },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, bq20z75_dt_ids);
+
+static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
+ struct i2c_client *client)
+{
+ const struct of_device_id *dtid;
+ struct device_node *of_node = client->dev.of_node;
+ struct bq20z75_platform_data *pdata = client->dev.platform_data;
+ enum of_gpio_flags gpio_flags;
+ int rc;
+ u32 prop;
+
+ /* verify this driver matches this device */
+ if (!of_node)
+ return NULL;
+
+ /* if platform data is set, honor it */
+ if (pdata)
+ return pdata;
+
+ /* first make sure at least one property is set, otherwise
+ * it won't change behavior from running without pdata.
+ */
+ if (!of_get_property(of_node, "ti,i2c-retry-count", NULL) &&
+ !of_get_property(of_node, "ti,poll-retry-count", NULL) &&
+ !of_get_property(of_node, "ti,battery-detect-gpios", NULL))
+ goto of_out;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(struct bq20z75_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ goto of_out;
+
+ rc = of_property_read_u32(of_node, "ti,i2c-retry-count", &prop);
+ if (!rc)
+ pdata->i2c_retry_count = prop;
+
+ rc = of_property_read_u32(of_node, "ti,poll-retry-count", &prop);
+ if (!rc)
+ pdata->poll_retry_count = prop;
+
+ if (!of_get_property(of_node, "ti,battery-detect-gpios", NULL)) {
+ pdata->battery_detect = -1;
+ goto of_out;
+ }
+
+ pdata->battery_detect = of_get_named_gpio_flags(of_node,
+ "ti,battery-detect-gpios", 0, &gpio_flags);
+
+ if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+ pdata->battery_detect_present = 0;
+ else
+ pdata->battery_detect_present = 1;
+
+of_out:
+ return pdata;
+}
+#else
+#define bq20z75_dt_ids NULL
+static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
+ struct i2c_client *client)
+{
+ return client->dev.platform_data;
+}
+#endif
+
static int __devinit bq20z75_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -642,6 +714,8 @@ static int __devinit bq20z75_probe(struct i2c_client *client,
bq20z75_device->power_supply.external_power_changed =
bq20z75_external_power_changed;
+ pdata = bq20z75_of_populate_pdata(client);
+
if (pdata) {
bq20z75_device->gpio_detect =
gpio_is_valid(pdata->battery_detect);
@@ -775,6 +849,7 @@ static struct i2c_driver bq20z75_battery_driver = {
.id_table = bq20z75_id,
.driver = {
.name = "bq20z75-battery",
+ .of_match_table = bq20z75_dt_ids,
},
};
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists