[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <678076BE-4CF8-4AC9-BE9B-9AF1A17B7AF8@kernel.crashing.org>
Date: Wed, 14 Sep 2011 15:42:21 -0500
From: Kumar Gala <galak@...nel.crashing.org>
To: David Daney <david.daney@...ium.com>
Cc: grant.likely@...retlab.ca, linux-mips@...ux-mips.org,
ralf@...ux-mips.org, devicetree-discuss@...ts.ozlabs.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>
Subject: Re: [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.
On Sep 13, 2011, at 6:23 PM, David Daney wrote:
> On 09/13/2011 04:07 PM, Kumar Gala wrote:
>>
>>> diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt
>>> new file mode 100644
>>> index 0000000..a908312
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/net/mdio-mux.txt
>>> @@ -0,0 +1,132 @@
>>> +Common MDIO bus multiplexer/switch properties.
>>> +
>>> +An MDIO bus multiplexer/switch will have several child busses that are
>>> +numbered uniquely in a device dependent manner. The nodes for an MDIO
>>> +bus multiplexer/switch will have one child node for each child bus.
>>> +
>>> +Required properties:
>>> +- parent-bus : phandle to the parent MDIO bus.
>>
>> Should probably be mdio-parent-bus
>
> Why? We know it is MDIO.
>
> Serial bus multiplexing is not a concept limited to MDIO. We would want to use "parent-bus" for some I2C multiplexers as well.
>From many years of dealing with device trees. We typically don't name things overlay generically unless they will be used over and over again as a common idiom (like reg, interrupt, etc.).
We don't really use 'bus' generically today.
>
>>
>>> +
>>> +Optional properties:
>>> +- Other properties specific to the multiplexer/switch hardware.
>>> +
>>> +Required properties for child nodes:
>>> +- #address-cells =<1>;
>>> +- #size-cells =<0>;
>>> +- cell-index : The sub-bus number.
>>
>> What does sub-bus number mean?
>
> There are N child buses (or sub-buses) coming out of the multiplexer. The cell-index is used as a handle or identifier for each of these.
>
> The concrete example in Patch 3/3 is a multiplexer with four child buses. The happen to have cell-indexes of 0, 1, 2 and 3.
>
> In the GPIO case of patch 3/3, these directly correspond the the state of the two GPIO pins controlling the multiplexer. The driver then uses the cell-index property to determine the state of the GPIO to connect any given child.
>
> It is possible that the documentation part of the patch could be made more clear about this.
>
>>
>>> +
>>> +
>>> +Example :
>>
> [...]
>>> +
>>> +int mdio_mux_probe(struct platform_device *pdev,
>>> + int (*switch_fn)(int cur, int desired, void *data),
>>> + void *data)
>>> +{
>>> + struct device_node *parent_bus_node;
>>> + struct device_node *child_bus_node;
>>> + int r, n, ret_val;
>>> + struct mii_bus *parent_bus;
>>> + struct mdio_mux_parent_bus *pb;
>>> + struct mdio_mux_child_bus *cb;
>>> +
>>> + if (!pdev->dev.of_node)
>>> + return -ENODEV;
>>> +
>>> + parent_bus_node = of_parse_phandle(pdev->dev.of_node, "parent-bus", 0);
>>> +
>>> + if (!parent_bus_node)
>>> + return -ENODEV;
>>> +
>>> + parent_bus = of_mdio_find_bus(parent_bus_node);
>>
>>
>> So what happens if the parent bus probe happens after the mux probe?
>>
>
> The whole house of cards collapses.
>
> Grant Likely has a patch to deal with this by retrying the probing, but as far as I know, it has not been merged yet.
- k--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists