| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1316037145-18079-1-git-send-email-justinmattock@gmail.com>
Date: Wed, 14 Sep 2011 14:52:25 -0700
From: "Justin P. Mattock" <justinmattock@...il.com>
To: trivial@...nel.org
Cc: linux-kernel@...r.kernel.org,
"Justin P. Mattock" <justinmattock@...il.com>,
"J. Bruce Fields" <bfields@...ldses.org>
Subject: [PATCH v2 1/3]Fix typos in the kernel
From: "Justin P. Mattock" <justinmattock@...il.com>
Resend with changes.
The below patch fixes some typos that I have found in the kernel.
Signed-off-by: Justin P. Mattock <justinmattock@...il.com>
Cc: J. Bruce Fields <bfields@...ldses.org>
---
arch/arm/mach-omap2/smartreflex.c | 2 +-
arch/arm/plat-omap/include/plat/serial.h | 2 +-
arch/powerpc/include/asm/io.h | 2 +-
arch/powerpc/include/asm/keylargo.h | 2 +-
arch/powerpc/mm/numa.c | 2 +-
arch/powerpc/platforms/embedded6xx/storcenter.c | 2 +-
arch/sparc/kernel/smp_64.c | 2 +-
drivers/acpi/acpica/hwxface.c | 2 +-
drivers/base/regmap/regmap.c | 2 +-
drivers/block/xen-blkback/xenbus.c | 2 +-
drivers/char/ipmi/ipmi_bt_sm.c | 2 +-
drivers/edac/ppc4xx_edac.c | 2 +-
drivers/media/video/zoran/zoran_driver.c | 2 +-
13 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 34c01a7..f49804f 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index de3b10c..564646d 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -2,7 +2,7 @@
* arch/arm/plat-omap/include/mach/serial.h
*
* Copyright (C) 2009 Texas Instruments
- * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@...com>
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@...com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 45698d5..2fd3645 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -394,7 +394,7 @@ __do_out_asm(_rec_outl, "stwbrx")
#endif /* CONFIG_PPC32 */
/* The "__do_*" operations below provide the actual "base" implementation
- * for each of the defined acccessor. Some of them use the out_* functions
+ * for each of the defined accessor. Some of them use the out_* functions
* directly, some of them still use EEH, though we might change that in the
* future. Those macros below provide the necessary argument swapping and
* handling of the IO base for PIO.
diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
index d8520ef..fc195d0 100644
--- a/arch/powerpc/include/asm/keylargo.h
+++ b/arch/powerpc/include/asm/keylargo.h
@@ -51,7 +51,7 @@
#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05)
-/* Hrm... this one is only to be used on Pismo. It seeem to also
+/* Hrm... this one is only to be used on Pismo. It seems to also
* control the timebase enable on other machines. Still to be
* experimented... --BenH.
*/
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 2164006..ef2674d 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -511,7 +511,7 @@ static int of_get_assoc_arrays(struct device_node *memory,
aa->n_arrays = *prop++;
aa->array_sz = *prop++;
- /* Now that we know the number of arrrays and size of each array,
+ /* Now that we know the number of arrays and size of each array,
* revalidate the size of the property read in.
*/
if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e..f1eebca 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the turbostation come
+ * Interrupt setup and service. Interrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 4a442c3..92aa0e7 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -840,7 +840,7 @@ static void tsb_sync(void *info)
struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id()];
struct mm_struct *mm = info;
- /* It is not valid to test "currrent->active_mm == mm" here.
+ /* It is not valid to test "current->active_mm == mm" here.
*
* The value of "current" is not changed atomically with
* switch_mm(). But that's OK, we just need to check the
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index f75f81a..f34ba22 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -355,7 +355,7 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register)
*
* PARAMETERS: register_id - ID of ACPI Bit Register to access
* Value - Value to write to the register, in bit
- * position zero. The bit is automaticallly
+ * position zero. The bit is automatically
* shifted to the correct position.
*
* RETURN: Status
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 0eef4da..d6217d2 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -309,7 +309,7 @@ static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
/*
* Some buses flag reads by setting the high bits in the
- * register addresss; since it's always the high bits for all
+ * register address; since it's always the high bits for all
* current formats we can do this here rather than in
* formatting. This may break if we get interesting formats.
*/
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 3f129b4..c092368 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -582,7 +582,7 @@ static void frontend_changed(struct xenbus_device *dev,
case XenbusStateConnected:
/*
* Ensure we connect even when two watches fire in
- * close successsion and we miss the intermediate value
+ * close succession and we miss the intermediate value
* of frontend_state.
*/
if (dev->state == XenbusStateConnected)
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 3ed20e8..cdd4c09f 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -560,7 +560,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
BT_CONTROL(BT_H_BUSY); /* set */
/*
- * Uncached, ordered writes should just proceeed serially but
+ * Uncached, ordered writes should just proceed serially but
* some BMCs don't clear B2H_ATN with one hit. Fast-path a
* workaround without too much penalty to the general case.
*/
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 0de7d87..032a9c6 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -142,7 +142,7 @@
/*
* The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are
- * indirectly acccessed and have a base and length defined by the
+ * indirectly accessed and have a base and length defined by the
* device tree. The base can be anything; however, we expect the
* length to be precisely two registers, the first for the address
* window and the second for the data window.
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index d4d05d2..c624403 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1550,7 +1550,7 @@ static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
if (zoran_formats[i].flags & flag && num++ == fmt->index) {
strncpy(fmt->description, zoran_formats[i].name,
sizeof(fmt->description) - 1);
- /* fmt struct pre-zeroed, so adding '\0' not neeed */
+ /* fmt struct pre-zeroed, so adding '\0' not need */
fmt->pixelformat = zoran_formats[i].fourcc;
if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists