| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1316128857-9781-3-git-send-email-kilroyd@googlemail.com>
Date: Fri, 16 Sep 2011 00:20:46 +0100
From: David Kilroy <kilroyd@...glemail.com>
To: linux-kernel@...r.kernel.org, greg@...ah.com
Cc: pe1dnn@...at.org, David Kilroy <kilroyd@...glemail.com>
Subject: [PATCH 02/13] staging: wlags49_h2: Reindent hcfdef.h
Untabified with tab-width set to 4. Reindented with linux style.
Also remove BITN macros.
Signed-off-by: David Kilroy <kilroyd@...glemail.com>
---
drivers/staging/wlags49_h2/hcfdef.h | 817 +++++++++++++++++------------------
1 files changed, 390 insertions(+), 427 deletions(-)
diff --git a/drivers/staging/wlags49_h2/hcfdef.h b/drivers/staging/wlags49_h2/hcfdef.h
index cb1966d..0261c73 100644
--- a/drivers/staging/wlags49_h2/hcfdef.h
+++ b/drivers/staging/wlags49_h2/hcfdef.h
@@ -1,286 +1,249 @@
-
-// vim:tw=110:ts=4:
#ifndef HCFDEFC_H
#define HCFDEFC_H 1
/*************************************************************************************************
-*
-* FILE : HCFDEF.H
-*
-* DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.8 $
-* Original: 2004/05/28 14:05:35 Revision: 1.59 Tag: hcf7_t20040602_01
-* Original: 2004/05/13 15:31:45 Revision: 1.53 Tag: hcf7_t7_20040513_01
-* Original: 2004/04/15 09:24:42 Revision: 1.44 Tag: hcf7_t7_20040415_01
-* Original: 2004/04/13 14:22:45 Revision: 1.43 Tag: t7_20040413_01
-* Original: 2004/04/01 15:32:55 Revision: 1.40 Tag: t7_20040401_01
-* Original: 2004/03/10 15:39:28 Revision: 1.36 Tag: t20040310_01
-* Original: 2004/03/03 14:10:12 Revision: 1.34 Tag: t20040304_01
-* Original: 2004/03/02 09:27:12 Revision: 1.32 Tag: t20040302_03
-* Original: 2004/02/24 13:00:29 Revision: 1.29 Tag: t20040224_01
-* Original: 2004/02/18 17:13:57 Revision: 1.26 Tag: t20040219_01
-*
-* AUTHOR : Nico Valster
-*
-* SPECIFICATION: ...........
-*
-* DESC : Definitions and Prototypes for HCF only
-*
-**************************************************************************************************
-*
-*
-* SOFTWARE LICENSE
-*
-* This software is provided subject to the following terms and conditions,
-* which you should read carefully before using the software. Using this
-* software indicates your acceptance of these terms and conditions. If you do
-* not agree with these terms and conditions, do not use the software.
-*
-* COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved
-* COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved
-* COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved
-* All rights reserved.
-*
-* Redistribution and use in source or binary forms, with or without
-* modifications, are permitted provided that the following conditions are met:
-*
-* . Redistributions of source code must retain the above copyright notice, this
-* list of conditions and the following Disclaimer as comments in the code as
-* well as in the documentation and/or other materials provided with the
-* distribution.
-*
-* . Redistributions in binary form must reproduce the above copyright notice,
-* this list of conditions and the following Disclaimer in the documentation
-* and/or other materials provided with the distribution.
-*
-* . Neither the name of Agere Systems Inc. nor the names of the contributors
-* may be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* Disclaimer
-*
-* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
-* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
-* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
-* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
-* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
-* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-* DAMAGE.
-*
-*
-*************************************************************************************************/
+ *
+ * FILE : HCFDEF.H
+ *
+ * DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.8 $
+ * Original: 2004/05/28 14:05:35 Revision: 1.59 Tag: hcf7_t20040602_01
+ * Original: 2004/05/13 15:31:45 Revision: 1.53 Tag: hcf7_t7_20040513_01
+ * Original: 2004/04/15 09:24:42 Revision: 1.44 Tag: hcf7_t7_20040415_01
+ * Original: 2004/04/13 14:22:45 Revision: 1.43 Tag: t7_20040413_01
+ * Original: 2004/04/01 15:32:55 Revision: 1.40 Tag: t7_20040401_01
+ * Original: 2004/03/10 15:39:28 Revision: 1.36 Tag: t20040310_01
+ * Original: 2004/03/03 14:10:12 Revision: 1.34 Tag: t20040304_01
+ * Original: 2004/03/02 09:27:12 Revision: 1.32 Tag: t20040302_03
+ * Original: 2004/02/24 13:00:29 Revision: 1.29 Tag: t20040224_01
+ * Original: 2004/02/18 17:13:57 Revision: 1.26 Tag: t20040219_01
+ *
+ * AUTHOR : Nico Valster
+ *
+ * SPECIFICATION: ...........
+ *
+ * DESC : Definitions and Prototypes for HCF only
+ *
+ **************************************************************************************************
+ *
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved
+ * COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved
+ * COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ *
+ *************************************************************************************************/
/************************************************************************************************/
/********************************* P R E F I X E S ********************************************/
/************************************************************************************************/
-//IFB_ Interface Block
-//HCMD_ Hermes Command
-//HFS_ Hermes (Transmit/Receive) Frame Structure
-//HREG_ Hermes Register
+//IFB_ Interface Block
+//HCMD_ Hermes Command
+//HFS_ Hermes (Transmit/Receive) Frame Structure
+//HREG_ Hermes Register
/*************************************************************************************************/
-#if 0 //
-#define BIT0 0x0001
-#define BIT1 0x0002
-#define BIT2 0x0004
-#define BIT3 0x0008
-#define BIT4 0x0010
-#define BIT5 0x0020
-#define BIT6 0x0040
-#define BIT7 0x0080
-#define BIT8 0x0100
-#define BIT9 0x0200
-#define BIT10 0x0400
-#define BIT11 0x0800
-#define BIT12 0x1000
-#define BIT13 0x2000
-#define BIT14 0x4000
-#define BIT15 0x8000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-#endif // 0
-
/************************************************************************************************/
/********************************* GENERAL EQUATES **********************************************/
/************************************************************************************************/
-#define HCF_MAGIC 0x7D37 // "}7" Handle validation
+#define HCF_MAGIC 0x7D37 // "}7" Handle validation
-#define PLUG_DATA_OFFSET 0x00000800 //needed by some test tool on top of H-II NDIS driver
+#define PLUG_DATA_OFFSET 0x00000800 //needed by some test tool on top of H-II NDIS driver
-#define INI_TICK_INI 0x00040000L
+#define INI_TICK_INI 0x00040000L
-#define IO_IN 0 //hcfio_in_string
-#define IO_OUT 1 //hcfio_out_string
+#define IO_IN 0 //hcfio_in_string
+#define IO_OUT 1 //hcfio_out_string
//DO_ASSERT, create an artificial FALSE to force an ASSERT without the nasty compiler warning
-#define DO_ASSERT ( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC )
-#define NT_ASSERT 0x0000 //, NEVER_TESTED
-#define NEVER_TESTED MERGE_2( 0xEFFE, 0xFEEF )
-#define SE_ASSERT 0x5EFF /* Side Effect, HCFASSERT invokation which are only called for the
- * side effect and which should never trigger */
-#define DHF_FILE_NAME_OFFSET 10000 //to distinguish DHF from HCF asserts by means of line number
-#define MMD_FILE_NAME_OFFSET 20000 //to distinguish MMD from HCF asserts by means of line number
+#define DO_ASSERT ( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC )
+#define NT_ASSERT 0x0000 //, NEVER_TESTED
+#define NEVER_TESTED MERGE_2( 0xEFFE, 0xFEEF )
+#define SE_ASSERT 0x5EFF /* Side Effect, HCFASSERT invokation which are only called for the
+ * side effect and which should never trigger */
+#define DHF_FILE_NAME_OFFSET 10000 //to distinguish DHF from HCF asserts by means of line number
+#define MMD_FILE_NAME_OFFSET 20000 //to distinguish MMD from HCF asserts by means of line number
// trace codes used to
// 1: profile execution times via HCF_TRACE and HCF_TRACE_VALUE
// 2: hierarchical flow information via HCFLOGENTRY / HCFLOGEXIT
-//#define HCF_TRACE_CONNECT useless
-//#define HCF_TRACE_DISCONNECT useless
-#define HCF_TRACE_ACTION 0x0000 // 0x0001
-#define HCF_TRACE_CNTL 0x0001 // 0x0002
-#define HCF_TRACE_DMA_RX_GET 0x0002 // 0x0004
-#define HCF_TRACE_DMA_RX_PUT 0x0003 // 0x0008
-#define HCF_TRACE_DMA_TX_GET 0x0004 // 0x0010
-#define HCF_TRACE_DMA_TX_PUT 0x0005 // 0x0020
-#define HCF_TRACE_GET_INFO 0x0006 // 0x0040
-#define HCF_TRACE_PUT_INFO 0x0007 // 0x0080
-#define HCF_TRACE_RCV_MSG 0x0008 // 0x0100
-#define HCF_TRACE_SEND_MSG 0x0009 // 0x0200
-#define HCF_TRACE_SERVICE_NIC 0x000A // 0x0400
+//#define HCF_TRACE_CONNECT useless
+//#define HCF_TRACE_DISCONNECT useless
+#define HCF_TRACE_ACTION 0x0000 // 0x0001
+#define HCF_TRACE_CNTL 0x0001 // 0x0002
+#define HCF_TRACE_DMA_RX_GET 0x0002 // 0x0004
+#define HCF_TRACE_DMA_RX_PUT 0x0003 // 0x0008
+#define HCF_TRACE_DMA_TX_GET 0x0004 // 0x0010
+#define HCF_TRACE_DMA_TX_PUT 0x0005 // 0x0020
+#define HCF_TRACE_GET_INFO 0x0006 // 0x0040
+#define HCF_TRACE_PUT_INFO 0x0007 // 0x0080
+#define HCF_TRACE_RCV_MSG 0x0008 // 0x0100
+#define HCF_TRACE_SEND_MSG 0x0009 // 0x0200
+#define HCF_TRACE_SERVICE_NIC 0x000A // 0x0400
// #define HCF_TRACE_ 0x000C // 0x1000
// #define HCF_TRACE_ 0x000D // 0x2000
// #define HCF_TRACE_ 0x000E // 0x4000
// #define HCF_TRACE_ 0x000F // 0x8000
-// ============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry
-#define HCF_TRACE_ACTION_KLUDGE 0x0010 /* once you start introducing kludges there is no end to it
- * this is an escape to do not assert on re-entrancy problem caused
- * by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going
- */
-#define HCF_TRACE_STRIO 0x0020
-#define HCF_TRACE_ALLOC 0X0021
-#define HCF_TRACE_DL 0X0023
-#define HCF_TRACE_ISR_INFO 0X0024
-#define HCF_TRACE_CALIBRATE 0x0026
-
-#define HCF_TRACE_CMD_CPL 0x0040
-#define HCF_TRACE_CMD_EXE 0x0041
-#define HCF_TRACE_GET_FID 0x0042
-#define HCF_TRACE_GET_FRAG 0x0043
-#define HCF_TRACE_INIT 0x0044
-#define HCF_TRACE_PUT_FRAG 0x0045
-#define HCF_TRACE_SETUP_BAP 0x0046
-
-#define HCF_TRACE_EXIT 0x8000 // Keil C warns "long constant truncated to int"
-
-//#define BAP_0 HREG_DATA_0 //Used by DMA controller to access NIC RAM
-#define BAP_1 HREG_DATA_1 //Used by HCF to access NIC RAM
+// ============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry
+#define HCF_TRACE_ACTION_KLUDGE 0x0010 /* once you start introducing kludges there is no end to it
+ * this is an escape to do not assert on re-entrancy problem caused
+ * by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going
+ */
+#define HCF_TRACE_STRIO 0x0020
+#define HCF_TRACE_ALLOC 0X0021
+#define HCF_TRACE_DL 0X0023
+#define HCF_TRACE_ISR_INFO 0X0024
+#define HCF_TRACE_CALIBRATE 0x0026
+
+#define HCF_TRACE_CMD_CPL 0x0040
+#define HCF_TRACE_CMD_EXE 0x0041
+#define HCF_TRACE_GET_FID 0x0042
+#define HCF_TRACE_GET_FRAG 0x0043
+#define HCF_TRACE_INIT 0x0044
+#define HCF_TRACE_PUT_FRAG 0x0045
+#define HCF_TRACE_SETUP_BAP 0x0046
+
+#define HCF_TRACE_EXIT 0x8000 // Keil C warns "long constant truncated to int"
+
+//#define BAP_0 HREG_DATA_0 //Used by DMA controller to access NIC RAM
+#define BAP_1 HREG_DATA_1 //Used by HCF to access NIC RAM
//************************* Hermes Receive/Transmit Frame Structures
//HFS_STAT
//see MMD.H for HFS_STAT_ERR
-#define HFS_STAT_MSG_TYPE 0xE000 //Hermes reported Message Type
-#define HFS_STAT_MIC_KEY_ID 0x1800 //MIC key used (if any)
-#define HFS_STAT_1042 0x2000 //RFC1042 Encoded
-#define HFS_STAT_TUNNEL 0x4000 //Bridge-Tunnel Encoded
-#define HFS_STAT_WMP_MSG 0x6000 //WaveLAN-II Management Protocol Frame
+#define HFS_STAT_MSG_TYPE 0xE000 //Hermes reported Message Type
+#define HFS_STAT_MIC_KEY_ID 0x1800 //MIC key used (if any)
+#define HFS_STAT_1042 0x2000 //RFC1042 Encoded
+#define HFS_STAT_TUNNEL 0x4000 //Bridge-Tunnel Encoded
+#define HFS_STAT_WMP_MSG 0x6000 //WaveLAN-II Management Protocol Frame
#if (HCF_TYPE) & HCF_TYPE_WPA
-#define HFS_STAT_MIC 0x0010 //Frame contains MIC //;? re-instate when F/W ready
+#define HFS_STAT_MIC 0x0010 //Frame contains MIC //;? re-instate when F/W ready
#endif
//************************* Hermes Register Offsets and Command bits
-#define HREG_IO_RANGE 0x80 //I/O Range used by Hermes
+#define HREG_IO_RANGE 0x80 //I/O Range used by Hermes
//************************* Command/Status
-#define HREG_CMD 0x00 //
-#define HCMD_CMD_CODE 0x3F
-#define HREG_PARAM_0 0x02 //
-#define HREG_PARAM_1 0x04 //
-#define HREG_PARAM_2 0x06 //
-#define HREG_STAT 0x08 //
-#define HREG_STAT_CMD_CODE 0x003F //
-#define HREG_STAT_DIAG_ERR 0x0100
-#define HREG_STAT_INQUIRE_ERR 0x0500
-#define HREG_STAT_CMD_RESULT 0x7F00 //
-#define HREG_RESP_0 0x0A //
-#define HREG_RESP_1 0x0C //
-#define HREG_RESP_2 0x0E //
+#define HREG_CMD 0x00 //
+#define HCMD_CMD_CODE 0x3F
+#define HREG_PARAM_0 0x02 //
+#define HREG_PARAM_1 0x04 //
+#define HREG_PARAM_2 0x06 //
+#define HREG_STAT 0x08 //
+#define HREG_STAT_CMD_CODE 0x003F //
+#define HREG_STAT_DIAG_ERR 0x0100
+#define HREG_STAT_INQUIRE_ERR 0x0500
+#define HREG_STAT_CMD_RESULT 0x7F00 //
+#define HREG_RESP_0 0x0A //
+#define HREG_RESP_1 0x0C //
+#define HREG_RESP_2 0x0E //
//************************* FID Management
-#define HREG_INFO_FID 0x10 //
-#define HREG_RX_FID 0x20 //
-#define HREG_ALLOC_FID 0x22 //
-#define HREG_TX_COMPL_FID 0x24 //
+#define HREG_INFO_FID 0x10 //
+#define HREG_RX_FID 0x20 //
+#define HREG_ALLOC_FID 0x22 //
+#define HREG_TX_COMPL_FID 0x24 //
//************************* BAP
//20031030 HWi Inserted this again because the dongle code uses this (GPIF.C)
-//#define HREG_SELECT_0 0x18 //
-//#define HREG_OFFSET_0 0x1C //
-//#define HREG_DATA_0 0x36 //
+//#define HREG_SELECT_0 0x18 //
+//#define HREG_OFFSET_0 0x1C //
+//#define HREG_DATA_0 0x36 //
-//#define HREG_OFFSET_BUSY 0x8000 // use HCMD_BUSY
-#define HREG_OFFSET_ERR 0x4000 //
-//rsrvd #define HREG_OFFSET_DATA_OFFSET 0x0FFF //
+//#define HREG_OFFSET_BUSY 0x8000 // use HCMD_BUSY
+#define HREG_OFFSET_ERR 0x4000 //
+//rsrvd #define HREG_OFFSET_DATA_OFFSET 0x0FFF //
-#define HREG_SELECT_1 0x1A //
-#define HREG_OFFSET_1 0x1E //
-#define HREG_DATA_1 0x38 //
+#define HREG_SELECT_1 0x1A //
+#define HREG_OFFSET_1 0x1E //
+#define HREG_DATA_1 0x38 //
//************************* Event
-#define HREG_EV_STAT 0x30 //
-#define HREG_INT_EN 0x32 //
-#define HREG_EV_ACK 0x34 //
+#define HREG_EV_STAT 0x30 //
+#define HREG_INT_EN 0x32 //
+#define HREG_EV_ACK 0x34 //
-#define HREG_EV_TICK 0x8000 //Auxiliary Timer Tick
-//#define HREG_EV_RES 0x4000 //H-I only: H/W error (Wait Time-out)
-#define HREG_EV_INFO_DROP 0x2000 //WMAC did not have sufficient RAM to build Unsollicited Frame
+#define HREG_EV_TICK 0x8000 //Auxiliary Timer Tick
+//#define HREG_EV_RES 0x4000 //H-I only: H/W error (Wait Time-out)
+#define HREG_EV_INFO_DROP 0x2000 //WMAC did not have sufficient RAM to build Unsollicited Frame
#if (HCF_TYPE) & HCF_TYPE_HII5
-#define HREG_EV_ACK_REG_READY 0x0000
+#define HREG_EV_ACK_REG_READY 0x0000
#else
-#define HREG_EV_ACK_REG_READY 0x1000 //Workaround Kludge bit for H-II (not H-II.5)
+#define HREG_EV_ACK_REG_READY 0x1000 //Workaround Kludge bit for H-II (not H-II.5)
#endif // HCF_TYPE_HII5
#if (HCF_SLEEP) & ( HCF_CDS | HCF_DDS )
-#define HREG_EV_SLEEP_REQ 0x0800
+#define HREG_EV_SLEEP_REQ 0x0800
#else
-#define HREG_EV_SLEEP_REQ 0x0000
+#define HREG_EV_SLEEP_REQ 0x0000
#endif // HCF_CDS / HCF_DDS
#if HCF_DMA
-//#define HREG_EV_LPESC 0x0400 // firmware sets this bit and clears it, not for host usage.
-#define HREG_EV_RDMAD 0x0200 // rx frame in host memory
-#define HREG_EV_TDMAD 0x0100 // tx frame in host memory processed
-//#define HREG_EV_RXDMA 0x0040 // firmware kicks off DMA engine (bit is not for host usage)
-//#define HREG_EV_TXDMA 0x0020 // firmware kicks off DMA engine (bit is not for host usage)
-#define HREG_EV_FW_DMA 0x0460 // firmware / DMA engine I/F (bits are not for host usage)
+//#define HREG_EV_LPESC 0x0400 // firmware sets this bit and clears it, not for host usage.
+#define HREG_EV_RDMAD 0x0200 // rx frame in host memory
+#define HREG_EV_TDMAD 0x0100 // tx frame in host memory processed
+//#define HREG_EV_RXDMA 0x0040 // firmware kicks off DMA engine (bit is not for host usage)
+//#define HREG_EV_TXDMA 0x0020 // firmware kicks off DMA engine (bit is not for host usage)
+#define HREG_EV_FW_DMA 0x0460 // firmware / DMA engine I/F (bits are not for host usage)
#else
-#define HREG_EV_FW_DMA 0x0000
+#define HREG_EV_FW_DMA 0x0000
#endif // HCF_DMA
-#define HREG_EV_INFO 0x0080 // Asynchronous Information Frame
-#define HREG_EV_CMD 0x0010 // Command completed, Status and Response available
-#define HREG_EV_ALLOC 0x0008 // Asynchronous part of Allocation/Reclaim completed
-#define HREG_EV_TX_EXC 0x0004 // Asynchronous Transmission unsuccessful completed
-#define HREG_EV_TX 0x0002 // Asynchronous Transmission successful completed
-#define HREG_EV_RX 0x0001 // Asynchronous Receive Frame
-
-#define HREG_EV_TX_EXT ( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) )
- /* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK
- * could be extended with HREG_EV_TX */
+#define HREG_EV_INFO 0x0080 // Asynchronous Information Frame
+#define HREG_EV_CMD 0x0010 // Command completed, Status and Response available
+#define HREG_EV_ALLOC 0x0008 // Asynchronous part of Allocation/Reclaim completed
+#define HREG_EV_TX_EXC 0x0004 // Asynchronous Transmission unsuccessful completed
+#define HREG_EV_TX 0x0002 // Asynchronous Transmission successful completed
+#define HREG_EV_RX 0x0001 // Asynchronous Receive Frame
+
+#define HREG_EV_TX_EXT ( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) )
+/* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK
+ * could be extended with HREG_EV_TX */
#if HCF_EXT_INT_TX_EX != HREG_EV_TX_EXC
err: these values should match;
#endif // HCF_EXT_INT_TX_EX / HREG_EV_TX_EXC
@@ -290,97 +253,97 @@ err: these values should match;
#endif // HCF_EXT_INT_TICK / HREG_EV_TICK
//************************* Host Software
-#define HREG_SW_0 0x28 //
-#define HREG_SW_1 0x2A //
-#define HREG_SW_2 0x2C //
-//rsrvd #define HREG_SW_3 0x2E //
+#define HREG_SW_0 0x28 //
+#define HREG_SW_1 0x2A //
+#define HREG_SW_2 0x2C //
+//rsrvd #define HREG_SW_3 0x2E //
//************************* Control and Auxiliary Port
-#define HREG_IO 0x12
-#define HREG_IO_SRESET 0x0001
-#define HREG_IO_WAKEUP_ASYNC 0x0002
-#define HREG_IO_WOKEN_UP 0x0004
-#define HREG_CNTL 0x14 //
-//#define HREG_CNTL_WAKEUP_SYNC 0x0001
-#define HREG_CNTL_AUX_ENA_STAT 0xC000
-#define HREG_CNTL_AUX_DIS_STAT 0x0000
-#define HREG_CNTL_AUX_ENA_CNTL 0x8000
-#define HREG_CNTL_AUX_DIS_CNTL 0x4000
-#define HREG_CNTL_AUX_DSD 0x2000
-#define HREG_CNTL_AUX_ENA (HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL )
-#define HREG_SPARE 0x16 //
-#define HREG_AUX_PAGE 0x3A //
-#define HREG_AUX_OFFSET 0x3C //
-#define HREG_AUX_DATA 0x3E //
+#define HREG_IO 0x12
+#define HREG_IO_SRESET 0x0001
+#define HREG_IO_WAKEUP_ASYNC 0x0002
+#define HREG_IO_WOKEN_UP 0x0004
+#define HREG_CNTL 0x14 //
+//#define HREG_CNTL_WAKEUP_SYNC 0x0001
+#define HREG_CNTL_AUX_ENA_STAT 0xC000
+#define HREG_CNTL_AUX_DIS_STAT 0x0000
+#define HREG_CNTL_AUX_ENA_CNTL 0x8000
+#define HREG_CNTL_AUX_DIS_CNTL 0x4000
+#define HREG_CNTL_AUX_DSD 0x2000
+#define HREG_CNTL_AUX_ENA (HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL )
+#define HREG_SPARE 0x16 //
+#define HREG_AUX_PAGE 0x3A //
+#define HREG_AUX_OFFSET 0x3C //
+#define HREG_AUX_DATA 0x3E //
#if HCF_DMA
//************************* DMA (bus mastering)
- // Be careful to use these registers only at a genuine 32 bits NIC
- // On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
- // thereof, e.g. HREG_DMA_CTRL register maps to HREG_CMD.
-#define HREG_DMA_CTRL 0x0040
-#define HREG_TXDMA_PTR32 0x0044
-#define HREG_TXDMA_PRIO_PTR32 0x0048
-#define HREG_TXDMA_HIPRIO_PTR32 0x004C
-#define HREG_RXDMA_PTR32 0x0050
-#define HREG_CARDDETECT_1 0x007C // contains 7D37
-#define HREG_CARDDETECT_2 0x007E // contains 7DE7
-#define HREG_FREETIMER 0x0058
-#define HREG_DMA_RX_CNT 0x0026
+// Be careful to use these registers only at a genuine 32 bits NIC
+// On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
+// thereof, e.g. HREG_DMA_CTRL register maps to HREG_CMD.
+#define HREG_DMA_CTRL 0x0040
+#define HREG_TXDMA_PTR32 0x0044
+#define HREG_TXDMA_PRIO_PTR32 0x0048
+#define HREG_TXDMA_HIPRIO_PTR32 0x004C
+#define HREG_RXDMA_PTR32 0x0050
+#define HREG_CARDDETECT_1 0x007C // contains 7D37
+#define HREG_CARDDETECT_2 0x007E // contains 7DE7
+#define HREG_FREETIMER 0x0058
+#define HREG_DMA_RX_CNT 0x0026
/******************************************************************************
-* Defines for the bits in the DmaControl register (@40h)
-******************************************************************************/
-#define HREG_DMA_CTRL_RXHWEN 0x80000000 // high word enable bit
-#define HREG_DMA_CTRL_RXRESET 0x40000000 // tx dma init bit
-#define HREG_DMA_CTRL_RXBAP1 BIT29
-#define HREG_DMA_CTRL_RX_STALLED BIT28
-#define HREG_DMA_CTRL_RXAUTOACK_DMADONE BIT27 // no host involvement req. for TDMADONE event
-#define HREG_DMA_CTRL_RXAUTOACK_INFO BIT26 // no host involvement req. for alloc event
-#define HREG_DMA_CTRL_RXAUTOACK_DMAEN 0x02000000 // no host involvement req. for TxDMAen event
-#define HREG_DMA_CTRL_RXAUTOACK_RX 0x01000000 // no host involvement req. for tx event
-#define HREG_DMA_CTRL_RX_BUSY BIT23 // read only bit
-//#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN 0 // bits 21..20
-//#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA 0 // mode 0
-#define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET 0x00010000 // mode 1
-#define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET 0x00020000 // mode 2
-//#define HREG_DMA_CTRL_RX_MODE_DISABLE (0x00020000|0x00010000) // disable tx dma engine
-#define HREG_DMA_CTRL_TXHWEN 0x8000 // low word enable bit
-#define HREG_DMA_CTRL_TXRESET 0x4000 // rx dma init bit
-#define HREG_DMA_CTRL_TXBAP1 BIT13
-#define HREG_DMA_CTRL_TXAUTOACK_DMADONE BIT11 // no host involvement req. for RxDMADONE event
-#define HREG_DMA_CTRL_TXAUTOACK_DMAEN 0x00000400 // no host involvement req. for RxDMAen event
-#define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC 0x00000200 // no host involvement req. for info event
-#define HREG_DMA_CTRL_TXAUTOACK_TX 0x00000100 // no host involvement req. for rx event
-#define HREG_DMA_CTRL_TX_BUSY BIT7 // read only bit
-//#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN 0 // bits 6..5
-//#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA 0 // mode 0
-#define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET BIT0 // mode 1
-#define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET 0x00000002 // mode 2
-//#define HREG_DMA_CTRL_TX_MODE_DISABLE (0x00000001|0x00000002) // disable tx dma engine
+ * Defines for the bits in the DmaControl register (@40h)
+ ******************************************************************************/
+#define HREG_DMA_CTRL_RXHWEN 0x80000000 // high word enable bit
+#define HREG_DMA_CTRL_RXRESET 0x40000000 // tx dma init bit
+#define HREG_DMA_CTRL_RXBAP1 BIT29
+#define HREG_DMA_CTRL_RX_STALLED BIT28
+#define HREG_DMA_CTRL_RXAUTOACK_DMADONE BIT27 // no host involvement req. for TDMADONE event
+#define HREG_DMA_CTRL_RXAUTOACK_INFO BIT26 // no host involvement req. for alloc event
+#define HREG_DMA_CTRL_RXAUTOACK_DMAEN 0x02000000 // no host involvement req. for TxDMAen event
+#define HREG_DMA_CTRL_RXAUTOACK_RX 0x01000000 // no host involvement req. for tx event
+#define HREG_DMA_CTRL_RX_BUSY BIT23 // read only bit
+//#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN 0 // bits 21..20
+//#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA 0 // mode 0
+#define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET 0x00010000 // mode 1
+#define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET 0x00020000 // mode 2
+//#define HREG_DMA_CTRL_RX_MODE_DISABLE (0x00020000|0x00010000) // disable tx dma engine
+#define HREG_DMA_CTRL_TXHWEN 0x8000 // low word enable bit
+#define HREG_DMA_CTRL_TXRESET 0x4000 // rx dma init bit
+#define HREG_DMA_CTRL_TXBAP1 BIT13
+#define HREG_DMA_CTRL_TXAUTOACK_DMADONE BIT11 // no host involvement req. for RxDMADONE event
+#define HREG_DMA_CTRL_TXAUTOACK_DMAEN 0x00000400 // no host involvement req. for RxDMAen event
+#define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC 0x00000200 // no host involvement req. for info event
+#define HREG_DMA_CTRL_TXAUTOACK_TX 0x00000100 // no host involvement req. for rx event
+#define HREG_DMA_CTRL_TX_BUSY BIT7 // read only bit
+//#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN 0 // bits 6..5
+//#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA 0 // mode 0
+#define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET BIT0 // mode 1
+#define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET 0x00000002 // mode 2
+//#define HREG_DMA_CTRL_TX_MODE_DISABLE (0x00000001|0x00000002) // disable tx dma engine
//configuration DWORD to configure DMA for mode2 operation, using BAP0 as the DMA BAP.
#define DMA_CTRLSTAT_GO (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RX_MODE_MULTI_PACKET | \
HREG_DMA_CTRL_RXAUTOACK_DMAEN | HREG_DMA_CTRL_RXAUTOACK_RX | \
HREG_DMA_CTRL_TXHWEN | /*;?HREG_DMA_CTRL_TX_TBUFCONT_PLAIN |*/ \
- HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN |\
+ HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN | \
HREG_DMA_CTRL_TXAUTOACK_DMAALLOC)
//configuration DWORD to reset both the Tx and Rx DMA engines
#define DMA_CTRLSTAT_RESET (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RXRESET | HREG_DMA_CTRL_TXHWEN | HREG_DMA_CTRL_TXRESET)
-//#define DESC_DMA_OWNED 0x80000000 // BIT31
-#define DESC_DMA_OWNED 0x8000 // BIT31
-#define DESC_SOP 0x8000 // BIT15
-#define DESC_EOP 0x4000 // BIT14
+//#define DESC_DMA_OWNED 0x80000000 // BIT31
+#define DESC_DMA_OWNED 0x8000 // BIT31
+#define DESC_SOP 0x8000 // BIT15
+#define DESC_EOP 0x4000 // BIT14
-#define DMA_RX 0
-#define DMA_TX 1
+#define DMA_RX 0
+#define DMA_TX 1
-// #define IFB_RxFirstDesc IFB_FirstDesc[DMA_RX]
-// #define IFB_TxFirstDesc IFB_FirstDesc[DMA_TX]
-// #define IFB_RxLastDesc IFB_LastDesc[DMA_RX]
-// #define IFB_TxLastDesc IFB_LastDesc[DMA_TX]
+// #define IFB_RxFirstDesc IFB_FirstDesc[DMA_RX]
+// #define IFB_TxFirstDesc IFB_FirstDesc[DMA_TX]
+// #define IFB_RxLastDesc IFB_LastDesc[DMA_RX]
+// #define IFB_TxLastDesc IFB_LastDesc[DMA_TX]
#endif // HCF_DMA
//
@@ -390,96 +353,96 @@ err: these values should match;
// Hermes Command Codes and Qualifier bits
-#define HCMD_BUSY 0x8000 // Busy bit, applicable for all commands
-#define HCMD_INI 0x0000 //
-#define HCMD_ENABLE HCF_CNTL_ENABLE // 0x0001
-#define HCMD_DISABLE HCF_CNTL_DISABLE // 0x0002
-#define HCMD_CONNECT HCF_CNTL_CONNECT // 0x0003
-#define HCMD_EXECUTE 0x0004 //
-#define HCMD_DISCONNECT HCF_CNTL_DISCONNECT // 0x0005
-#define HCMD_SLEEP 0x0006 //
-#define HCMD_CONTINUE HCF_CNTL_CONTINUE // 0x0007
-#define HCMD_RETRY 0x0100 // Retry bit
-#define HCMD_ALLOC 0x000A //
-#define HCMD_TX 0x000B //
-#define HCMD_RECL 0x0100 // Reclaim bit, applicable for Tx and Inquire
-#define HCMD_INQUIRE 0x0011 //
-#define HCMD_ACCESS 0x0021 //
-#define HCMD_ACCESS_WRITE 0x0100 // Write bit
-#define HCMD_PROGRAM 0x0022 //
-#define HCMD_READ_MIF 0x0030
-#define HCMD_WRITE_MIF 0x0031
-#define HCMD_THESEUS 0x0038
-#define HCMD_STARTPREAMBLE 0x0E00 // Start continuous preamble Tx
-#define HCMD_STOP 0x0F00 // Stop Theseus test mode
+#define HCMD_BUSY 0x8000 // Busy bit, applicable for all commands
+#define HCMD_INI 0x0000 //
+#define HCMD_ENABLE HCF_CNTL_ENABLE // 0x0001
+#define HCMD_DISABLE HCF_CNTL_DISABLE // 0x0002
+#define HCMD_CONNECT HCF_CNTL_CONNECT // 0x0003
+#define HCMD_EXECUTE 0x0004 //
+#define HCMD_DISCONNECT HCF_CNTL_DISCONNECT // 0x0005
+#define HCMD_SLEEP 0x0006 //
+#define HCMD_CONTINUE HCF_CNTL_CONTINUE // 0x0007
+#define HCMD_RETRY 0x0100 // Retry bit
+#define HCMD_ALLOC 0x000A //
+#define HCMD_TX 0x000B //
+#define HCMD_RECL 0x0100 // Reclaim bit, applicable for Tx and Inquire
+#define HCMD_INQUIRE 0x0011 //
+#define HCMD_ACCESS 0x0021 //
+#define HCMD_ACCESS_WRITE 0x0100 // Write bit
+#define HCMD_PROGRAM 0x0022 //
+#define HCMD_READ_MIF 0x0030
+#define HCMD_WRITE_MIF 0x0031
+#define HCMD_THESEUS 0x0038
+#define HCMD_STARTPREAMBLE 0x0E00 // Start continuous preamble Tx
+#define HCMD_STOP 0x0F00 // Stop Theseus test mode
//Configuration Management
//
-#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM 1 // Default Bottom Compatibility for Primary Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_PRI_3_TOP 1 // Default Top Compatibility for Primary Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM 1 // Default Bottom Compatibility for Primary Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_PRI_3_TOP 1 // Default Top Compatibility for Primary Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
-#define CFG_DRV_ACT_RANGES_HSI_4_TOP 1 // Default Top Compatibility for H/W - driver I/F
+#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
+#define CFG_DRV_ACT_RANGES_HSI_4_TOP 1 // Default Top Compatibility for H/W - driver I/F
-#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
-#define CFG_DRV_ACT_RANGES_HSI_5_TOP 1 // Default Top Compatibility for H/W - driver I/F
+#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
+#define CFG_DRV_ACT_RANGES_HSI_5_TOP 1 // Default Top Compatibility for H/W - driver I/F
#if (HCF_TYPE) & HCF_TYPE_WPA
-#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 16 // Default Bottom Compatibility for AP Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_APF_1_TOP 16 // Default Top Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 16 // Default Bottom Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_1_TOP 16 // Default Top Compatibility for AP Firmware - driver I/F
#else //;? is this REALLY O.K.
-#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_APF_1_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_1_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#endif // HCF_TYPE_WPA
-#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM 2 // Default Bottom Compatibility for AP Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_APF_2_TOP 2 // Default Top Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM 2 // Default Bottom Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_2_TOP 2 // Default Top Compatibility for AP Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_APF_3_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_APF_3_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_3_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_3_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_APF_4_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_APF_4_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_4_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_APF_4_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#if (HCF_TYPE) & HCF_TYPE_HII5
-#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 6 // Default Bottom Compatibility for Station Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_STA_2_TOP 6 // Default Top Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 6 // Default Bottom Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_2_TOP 6 // Default Top Compatibility for Station Firmware - driver I/F
#else // (HCF_TYPE) & HCF_TYPE_HII5
-#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_STA_2_TOP 2 // Default Top Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_2_TOP 2 // Default Top Compatibility for Station Firmware - driver I/F
#endif // (HCF_TYPE) & HCF_TYPE_HII5
-#define CFG_DRV_ACT_RANGES_STA_3_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_STA_3_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_3_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_3_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_STA_4_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
-#define CFG_DRV_ACT_RANGES_STA_4_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_4_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
+#define CFG_DRV_ACT_RANGES_STA_4_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_PRI_1_TOP || defined HCF_CFG_PRI_1_BOTTOM
-err: PRI_1 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
+err: PRI_1 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
#endif // HCF_CFG_PRI_1_TOP / HCF_CFG_PRI_1_BOTTOM
#if defined HCF_CFG_PRI_2_TOP || defined HCF_CFG_PRI_2_BOTTOM
-err: PRI_2 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
+err: PRI_2 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
#endif // HCF_CFG_PRI_2_TOP / HCF_CFG_PRI_2_BOTTOM
-#ifdef HCF_CFG_PRI_3_TOP // Top Compatibility for Primary Firmware - driver I/F
-#if HCF_CFG_PRI_3_TOP == 0 || \
+#ifdef HCF_CFG_PRI_3_TOP // Top Compatibility for Primary Firmware - driver I/F
+#if HCF_CFG_PRI_3_TOP == 0 || \
CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_TOP && HCF_CFG_PRI_3_TOP <= CFG_DRV_ACT_RANGES_PRI_3_TOP
#undef CFG_DRV_ACT_RANGES_PRI_3_TOP
-#define CFG_DRV_ACT_RANGES_PRI_3_TOP HCF_CFG_PRI_3_TOP
+#define CFG_DRV_ACT_RANGES_PRI_3_TOP HCF_CFG_PRI_3_TOP
#else
err: ;
#endif
#endif // HCF_CFG_PRI_3_TOP
-#ifdef HCF_CFG_PRI_3_BOTTOM // Bottom Compatibility for Primary Firmware - driver I/F
+#ifdef HCF_CFG_PRI_3_BOTTOM // Bottom Compatibility for Primary Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_BOTTOM && HCF_CFG_PRI_3_BOTTOM <= CFG_DRV_ACT_RANGES_PRI_3_TOP
#undef CFG_DRV_ACT_RANGES_PRI_3_BOTTOM
-#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM HCF_CFG_PRI_3_BOTTOM
+#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM HCF_CFG_PRI_3_BOTTOM
#else
err: ;
#endif
@@ -488,77 +451,77 @@ err: ;
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_HSI_0_TOP || defined HCF_CFG_HSI_0_BOTTOM
-err: HSI_0 not supported for H-I; // Compatibility for HSI I/F
+err: HSI_0 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_0_TOP / HCF_CFG_HSI_0_BOTTOM
#if defined HCF_CFG_HSI_1_TOP || defined HCF_CFG_HSI_1_BOTTOM
-err: HSI_1 not supported for H-I; // Compatibility for HSI I/F
+err: HSI_1 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_1_TOP / HCF_CFG_HSI_1_BOTTOM
#if defined HCF_CFG_HSI_2_TOP || defined HCF_CFG_HSI_2_BOTTOM
-err: HSI_2 not supported for H-I; // Compatibility for HSI I/F
+err: HSI_2 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_2_TOP / HCF_CFG_HSI_2_BOTTOM
#if defined HCF_CFG_HSI_3_TOP || defined HCF_CFG_HSI_3_BOTTOM
-err: HSI_3 not supported for H-I; // Compatibility for HSI I/F
+err: HSI_3 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_3_TOP / HCF_CFG_HSI_3_BOTTOM
-#ifdef HCF_CFG_HSI_4_TOP // Top Compatibility for HSI I/F
-#if HCF_CFG_HSI_4_TOP == 0 || \
+#ifdef HCF_CFG_HSI_4_TOP // Top Compatibility for HSI I/F
+#if HCF_CFG_HSI_4_TOP == 0 || \
CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= CF_CFG_HSI_4_TOP && HCF_CFG_HSI_4_TOP <= CFG_DRV_ACT_RANGES_HSI_4_TOP
#undef CFG_DRV_ACT_RANGES_HSI_4_TOP
-#define CFG_DRV_ACT_RANGES_HSI_4_TOP HCF_CFG_HSI_4_TOP
+#define CFG_DRV_ACT_RANGES_HSI_4_TOP HCF_CFG_HSI_4_TOP
#else
err: ;
#endif
#endif // HCF_CFG_HSI_4_TOP
-#ifdef HCF_CFG_HSI_4_BOTTOM // Bottom Compatibility for HSI I/F
+#ifdef HCF_CFG_HSI_4_BOTTOM // Bottom Compatibility for HSI I/F
#if CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= HCF_CFG_HSI_4_BOTTOM && HCF_CFG_HSI_4_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_4_TOP
#undef CFG_DRV_ACT_RANGES_HSI_4_BOTTOM
-#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM HCF_CFG_HSI_4_BOTTOM
+#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM HCF_CFG_HSI_4_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_HSI_4_BOTTOM
-#ifdef HCF_CFG_HSI_5_TOP // Top Compatibility for HSI I/F
-#if HCF_CFG_HSI_5_TOP == 0 || \
+#ifdef HCF_CFG_HSI_5_TOP // Top Compatibility for HSI I/F
+#if HCF_CFG_HSI_5_TOP == 0 || \
CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= CF_CFG_HSI_5_TOP && HCF_CFG_HSI_5_TOP <= CFG_DRV_ACT_RANGES_HSI_5_TOP
#undef CFG_DRV_ACT_RANGES_HSI_5_TOP
-#define CFG_DRV_ACT_RANGES_HSI_5_TOP HCF_CFG_HSI_5_TOP
+#define CFG_DRV_ACT_RANGES_HSI_5_TOP HCF_CFG_HSI_5_TOP
#else
err: ;
#endif
#endif // HCF_CFG_HSI_5_TOP
-#ifdef HCF_CFG_HSI_5_BOTTOM // Bottom Compatibility for HSI I/F
+#ifdef HCF_CFG_HSI_5_BOTTOM // Bottom Compatibility for HSI I/F
#if CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= HCF_CFG_HSI_5_BOTTOM && HCF_CFG_HSI_5_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_5_TOP
#undef CFG_DRV_ACT_RANGES_HSI_5_BOTTOM
-#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM HCF_CFG_HSI_5_BOTTOM
+#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM HCF_CFG_HSI_5_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_HSI_5_BOTTOM
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_APF_1_TOP || defined HCF_CFG_APF_1_BOTTOM
-err: APF_1 not supported for H-I; // Compatibility for AP Firmware - driver I/F
+err: APF_1 not supported for H-I; // Compatibility for AP Firmware - driver I/F
#endif // HCF_CFG_APF_1_TOP / HCF_CFG_APF_1_BOTTOM
-#ifdef HCF_CFG_APF_2_TOP // Top Compatibility for AP Firmware - driver I/F
-#if HCF_CFG_APF_2_TOP == 0 || \
+#ifdef HCF_CFG_APF_2_TOP // Top Compatibility for AP Firmware - driver I/F
+#if HCF_CFG_APF_2_TOP == 0 || \
CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_TOP && HCF_CFG_APF_2_TOP <= CFG_DRV_ACT_RANGES_APF_2_TOP
#undef CFG_DRV_ACT_RANGES_APF_2_TOP
-#define CFG_DRV_ACT_RANGES_APF_2_TOP HCF_CFG_APF_2_TOP
+#define CFG_DRV_ACT_RANGES_APF_2_TOP HCF_CFG_APF_2_TOP
#else
err: ;
#endif
#endif // HCF_CFG_APF_TOP
-#ifdef HCF_CFG_APF_2_BOTTOM // Bottom Compatibility for AP Firmware - driver I/F
+#ifdef HCF_CFG_APF_2_BOTTOM // Bottom Compatibility for AP Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_BOTTOM && HCF_CFG_APF_2_BOTTOM <= CFG_DRV_ACT_RANGES_APF_2_TOP
#undef CFG_DRV_ACT_RANGES_APF_2_BOTTOM
-#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM HCF_CFG_APF_2_BOTTOM
+#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM HCF_CFG_APF_2_BOTTOM
#else
err: ;
#endif
@@ -566,23 +529,23 @@ err: ;
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_STA_1_TOP || defined HCF_CFG_STA_1_BOTTOM
-err: STA_1 not supported for H-I; // Compatibility for Station Firmware - driver I/F
+err: STA_1 not supported for H-I; // Compatibility for Station Firmware - driver I/F
#endif // HCF_CFG_STA_1_TOP / HCF_CFG_STA_1_BOTTOM
-#ifdef HCF_CFG_STA_2_TOP // Top Compatibility for Station Firmware - driver I/F
-#if HCF_CFG_STA_2_TOP == 0 || \
+#ifdef HCF_CFG_STA_2_TOP // Top Compatibility for Station Firmware - driver I/F
+#if HCF_CFG_STA_2_TOP == 0 || \
CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_TOP && HCF_CFG_STA_2_TOP <= CFG_DRV_ACT_RANGES_STA_2_TOP
#undef CFG_DRV_ACT_RANGES_STA_2_TOP
-#define CFG_DRV_ACT_RANGES_STA_2_TOP HCF_CFG_STA_2_TOP
+#define CFG_DRV_ACT_RANGES_STA_2_TOP HCF_CFG_STA_2_TOP
#else
err: ;
#endif
#endif // HCF_CFG_STA_TOP
-#ifdef HCF_CFG_STA_2_BOTTOM // Bottom Compatibility for Station Firmware - driver I/F
+#ifdef HCF_CFG_STA_2_BOTTOM // Bottom Compatibility for Station Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_BOTTOM && HCF_CFG_STA_2_BOTTOM <= CFG_DRV_ACT_RANGES_STA_2_TOP
#undef CFG_DRV_ACT_RANGES_STA_2_BOTTOM
-#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM HCF_CFG_STA_2_BOTTOM
+#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM HCF_CFG_STA_2_BOTTOM
#else
err: ;
#endif
@@ -597,32 +560,32 @@ err: ;
#if defined MSF_WAIT
err: MSF should no longer supply this macro;
#else
-#define MSF_WAIT(x) \
- { PROT_CNT_INI \
- HCF_WAIT_WHILE( ( IPW( HREG_IO ) & HREG_IO_WOKEN_UP ) == 0 ); \
- HCFASSERT( prot_cnt, IPW( HREG_IO ) ) \
- }
+#define MSF_WAIT(x) \
+ { PROT_CNT_INI \
+ HCF_WAIT_WHILE( ( IPW( HREG_IO ) & HREG_IO_WOKEN_UP ) == 0 ); \
+ HCFASSERT( prot_cnt, IPW( HREG_IO ) ) \
+ }
#endif // MSF_WAIT
#else
-#define MSF_WAIT(x) /*NOP*/
+#define MSF_WAIT(x) /*NOP*/
#endif // HCF_SLEEP
-#define LOF(x) (sizeof(x)/sizeof(hcf_16)-1)
+#define LOF(x) (sizeof(x)/sizeof(hcf_16)-1)
-#define MUL_BY_2( x ) ( (x) << 1 ) //used to multiply by 2
-#define DIV_BY_2( x ) ( (x) >> 1 ) //used to divide by 2
+#define MUL_BY_2( x ) ( (x) << 1 ) //used to multiply by 2
+#define DIV_BY_2( x ) ( (x) >> 1 ) //used to divide by 2
//resolve problems on for some 16 bits compilers to create 32 bit values
-#define MERGE_2( hw, lw ) ( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) )
+#define MERGE_2( hw, lw ) ( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) )
#if ! defined HCF_STATIC
-#define HCF_STATIC static
-#endif // HCF_STATIC
+#define HCF_STATIC static
+#endif // HCF_STATIC
#if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0
-#define DAWA_ACK( mask) { \
- OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY ); \
- OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); }
+#define DAWA_ACK( mask) { \
+ OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY ); \
+ OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); }
#define DAWA_ZERO_FID(reg) OPW( reg, 0 );
#else
#define DAWA_ACK( mask) OPW( HREG_EV_ACK, mask );
@@ -630,20 +593,20 @@ err: MSF should no longer supply this macro;
#endif // HCF_TYPE_HII5
#if (HCF_TYPE) & HCF_TYPE_WPA
-#define CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len )
-#define CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len )
+#define CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len )
+#define CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len )
#define IF_SSN(x) x
#define IF_NOT_SSN(x)
#else
-#define CALC_RX_MIC( p, len )
-#define CALC_TX_MIC( p, len )
+#define CALC_RX_MIC( p, len )
+#define CALC_TX_MIC( p, len )
#define MIC_RX_RTN( mic, dw )
#define MIC_TX_RTN( mic, dw )
#define IF_SSN(x)
#define IF_NOT_SSN(x) x
#endif // HCF_TYPE_WPA
-#if HCF_TALLIES & HCF_TALLIES_HCF //HCF tally support
+#if HCF_TALLIES & HCF_TALLIES_HCF //HCF tally support
#define IF_TALLY(x) x
#else
#define IF_TALLY(x)
@@ -651,23 +614,23 @@ err: MSF should no longer supply this macro;
#if HCF_DMA
-#define IF_DMA(x) x
+#define IF_DMA(x) x
#define IF_NOT_DMA(x)
-#define IF_USE_DMA(x) if ( ifbp->IFB_CntlOpt & USE_DMA ) x
-#define IF_NOT_USE_DMA(x) if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) x
+#define IF_USE_DMA(x) if ( ifbp->IFB_CntlOpt & USE_DMA ) x
+#define IF_NOT_USE_DMA(x) if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) x
#else
#define IF_DMA(x)
-#define IF_NOT_DMA(x) x
+#define IF_NOT_DMA(x) x
#define IF_USE_DMA(x)
-#define IF_NOT_USE_DMA(x) x
+#define IF_NOT_USE_DMA(x) x
#endif // HCF_DMA
#define IPW(x) ((hcf_16)IN_PORT_WORD( ifbp->IFB_IOBase + (x) ) )
#define OPW(x, y) OUT_PORT_WORD( ifbp->IFB_IOBase + (x), y )
- /* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls
- * in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt
- */
+/* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls
+ * in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt
+ */
#if HCF_PROT_TIME == 0
#define PROT_CNT_INI
#define IF_PROT_TIME(x)
@@ -677,8 +640,8 @@ err: MSF should no longer supply this macro;
#define HCF_WAIT_WHILE( x ) while ( x ) /*NOP*/;
#endif // HCF_YIELD
#else
-#define PROT_CNT_INI hcf_32 prot_cnt = ifbp->IFB_TickIni;
-#define IF_PROT_TIME(x) x
+#define PROT_CNT_INI hcf_32 prot_cnt = ifbp->IFB_TickIni;
+#define IF_PROT_TIME(x) x
#if defined HCF_YIELD
#define HCF_WAIT_WHILE( x ) while ( prot_cnt && (x) && (HCF_YIELD) ) prot_cnt--;
#else
@@ -697,7 +660,7 @@ err: you used an invalid bitmask;
#endif // HCF_EX_INT
#if 0 //get compiler going
-#if HCF_EX_INT_TICK != HREG_EV_TICK
+#if HCF_EX_INT_TICK != HREG_EV_TICK
;? out dated checking
err: someone redefined these macros while the implemenation assumes they are equal;
#endif
@@ -724,36 +687,36 @@ err: someone redefined these macros while the implemenation assumes they are equ
#define HCFASSERT(x,q) {if (!(x)) {mdd_assert( ifbp, __LINE__ , q );}}
#define MMDASSERT(x,q) {if (!(x)) {mdd_assert( assert_ifbp, __LINE__ + FILE_NAME_OFFSET, q );}}
-#define HCFLOGENTRY( where, what ) \
-{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
- HCF_ENTRY( ifbp ); \
- HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace ); \
- ifbp->IFB_AssertTrace |= 1<<((where)&0xF); \
- } \
-HCFTRACE(ifbp, where ) \
-HCFTRACEVALUE(ifbp, what ) \
-}
-
-#define HCFLOGEXIT( where ) \
-{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
- HCF_EXIT( ifbp ); \
- ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF)); \
- } \
-HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
-}
+#define HCFLOGENTRY( where, what ) \
+ {if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
+ HCF_ENTRY( ifbp ); \
+ HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace ); \
+ ifbp->IFB_AssertTrace |= 1<<((where)&0xF); \
+ } \
+ HCFTRACE(ifbp, where ) \
+ HCFTRACEVALUE(ifbp, what ) \
+ }
+
+#define HCFLOGEXIT( where ) \
+ {if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
+ HCF_EXIT( ifbp ); \
+ ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF)); \
+ } \
+ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
+ }
#else // HCF_ASSERT
#define HCFASSERT( x, q )
#define MMDASSERT( x, q )
-#define HCFLOGENTRY( where, what ) {HCF_ENTRY( ifbp );}
-#define HCFLOGEXIT( where ) {HCF_EXIT( ifbp );}
+#define HCFLOGENTRY( where, what ) {HCF_ENTRY( ifbp );}
+#define HCFLOGEXIT( where ) {HCF_EXIT( ifbp );}
#endif // HCF_ASSERT
#if HCF_INT_ON
/* ;? HCFASSERT_INT
* #if (HCF_SLEEP) & HCF_DDS
* #define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF && ifbp->IFB_IntOffCnt != 0xFFFE, \
- * ifbp->IFB_IntOffCnt )
+ * ifbp->IFB_IntOffCnt )
* #else
*/
#define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF, ifbp->IFB_IntOffCnt )
@@ -764,8 +727,8 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
#if defined HCF_TRACE
-#define HCFTRACE(ifbp, where ) {OPW( HREG_SW_1, where );}
-//#define HCFTRACE(ifbp, where ) {HCFASSERT( DO_ASSERT, where );}
+#define HCFTRACE(ifbp, where ) {OPW( HREG_SW_1, where );}
+//#define HCFTRACE(ifbp, where ) {HCFASSERT( DO_ASSERT, where );}
#define HCFTRACEVALUE(ifbp, what ) {OPW( HREG_SW_2, what );}
//#define HCFTRACEVALUE(ifbp, what ) {HCFASSERT( DO_ASSERT, what );}
#else
@@ -775,7 +738,7 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
#if HCF_BIG_ENDIAN
-#define BE_PAR(x) ,x
+#define BE_PAR(x) ,x
#else
#define BE_PAR(x)
#endif // HCF_BIG_ENDIAN
@@ -789,13 +752,13 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
/************************************************************************************************/
#if HCF_ASSERT
-extern IFBP BASED assert_ifbp; //to make asserts easily work under MMD and DHF
-EXTERN_C void mdd_assert (IFBP ifbp, unsigned int line_number, hcf_32 q );
+extern IFBP BASED assert_ifbp; //to make asserts easily work under MMD and DHF
+EXTERN_C void mdd_assert (IFBP ifbp, unsigned int line_number, hcf_32 q );
#endif //HCF_ASSERT
-#if ! ( (HCF_IO) & HCF_IO_32BITS ) // defined 16 bits only
+#if ! ( (HCF_IO) & HCF_IO_32BITS ) // defined 16 bits only
#undef OUT_PORT_STRING_32
#undef IN_PORT_STRING_32
#endif // HCF_IO
-#endif //HCFDEFC_H
+#endif //HCFDEFC_H
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists