lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1316691479-1849-2-git-send-email-keshava_mgowda@ti.com>
Date:	Thu, 22 Sep 2011 17:07:55 +0530
From:	Keshava Munegowda <keshava_mgowda@...com>
To:	<linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <b-cousson@...com>,
	<paul@...an.com>
CC:	Keshava Munegowda <keshava_mgowda@...com>, <balbi@...com>,
	<gadiyar@...com>, <sameo@...ux.intel.com>, <parthab@...ia.ti.com>,
	<tony@...mide.com>, <khilman@...com>, <johnstul@...ibm.com>,
	<vishwanath.bs@...com>
Subject: [PATCH 1/5 v11] arm: omap: usb: ehci and ohci hwmod structures for omap4

From: Benoit Cousson <b-cousson@...com>

Following 4 hwmod structures are added
1. usb_host_hs hwmod of usbhs with uhh base address and functional clock,
2. usb_ehci_hs hwmod with irq and base address,
3. usb_ohci_hs hwmod with irq and base address,
   - The ehci and ohci hwmods does not require functional clock
     because usb_host_hs has functional clock which is sufficient
     to access ehci and ohci address space.
   - The usb_ehci_hs and usb_ohci_hs should be two separate hwmods
     which should not be combined. This is needed because ehci and
     ohci will have separate dedicated ports & in omap4 there is a
     clock per port.We should be able to configure the IO-Wakeup
     capability of pins specific to EHCI & OHCI separately and depending
     on the I/O wakeup event  the  only port clocks corresponding
     to the wakeup source will be enabled internally by the usb host driver.

4. usb_tll_hs hwmod of usbhs with the TLL base address and irq.

Signed-off-by: Benoit Cousson <b-cousson@...com>

- The initial version had only two hwmods,usb_host_hs and usb_tll_hs.
These two hwmods are reorganized as above four hwmods, because there
will be dedicated ports for ehci and ohci; and each port will have I/O
mux, which will be initialized per hwmod in future.

- migrated these hwmod structures to Kevin's pm branch:
 git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git .

Signed-off-by: Keshava Munegowda <keshava_mgowda@...com>
Reviewed-by: Partha Basak <parthab@...ia.ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |  250 +++++++++++++++++++++++++++-
 1 files changed, 249 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 6201422..5e8a640 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -68,6 +68,10 @@ static struct omap_hwmod omap44xx_mmc2_hwmod;
 static struct omap_hwmod omap44xx_mpu_hwmod;
 static struct omap_hwmod omap44xx_mpu_private_hwmod;
 static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
+static struct omap_hwmod omap44xx_usbhs_ohci_hwmod;
+static struct omap_hwmod omap44xx_usbhs_ehci_hwmod;
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
 
 /*
  * Interconnects omap_hwmod structures
@@ -5336,6 +5340,245 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+	.master		= &omap44xx_usb_host_hs_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
+	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+	.name = "usb_host_hs",
+	.sysc = &omap44xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
+	&omap44xx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+	{
+		.name		= "uhh",
+		.pa_start	= 0x4a064000,
+		.pa_end		= 0x4a0647ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_host_hs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_host_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
+	&omap44xx_l4_cfg__usb_host_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap44xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.main_clk	= "usb_host_hs_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.slaves		= omap44xx_usb_host_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
+	.masters	= omap44xx_usb_host_hs_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_masters),
+/*
+ * The usbhs controller prevents the enter omap to low power mode
+ * if other than FORCE IDLE and FORCE STANDBY are used.
+ */
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* 'usb_ohci_hs' class */
+static struct omap_hwmod_class omap44xx_usbhs_ohci_hwmod_class = {
+	.name = "usb_ohci_hs",
+};
+
+static struct omap_hwmod_irq_info omap44xx_usbhs_ohci_irqs[] = {
+	{ .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usbhs_ohci_addrs[] = {
+	{
+		.name		= "ohci",
+		.pa_start	= 0x4a064800,
+		.pa_end		= 0x4a064bff,
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usbhs_ohci = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usbhs_ohci_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usbhs_ohci_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usbhs_ohci_slaves[] = {
+	&omap44xx_l4_cfg__usbhs_ohci,
+};
+
+static struct omap_hwmod omap44xx_usbhs_ohci_hwmod = {
+	.name		= "usb_ohci_hs",
+	.class		= &omap44xx_usbhs_ohci_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap44xx_usbhs_ohci_irqs,
+	.slaves		= omap44xx_usbhs_ohci_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usbhs_ohci_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+/*
+ * The ohci hwmod does not has any sysconfig , so
+ * there is no RESET and IDLE settings.
+ */
+	.flags		= HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
+};
+
+/* 'usb_ehci_hs' class */
+static struct omap_hwmod_class omap44xx_usbhs_ehci_hwmod_class = {
+	.name = "usb_ehci_hs",
+};
+
+static struct omap_hwmod_irq_info omap44xx_usbhs_ehci_irqs[] = {
+	{ .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usbhs_ehci_addrs[] = {
+	{
+		.name		= "ehci",
+		.pa_start	= 0x4a064c00,
+		.pa_end		= 0x4a064fff,
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usbhs_ehci = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usbhs_ehci_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usbhs_ehci_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usbhs_ehci_slaves[] = {
+	&omap44xx_l4_cfg__usbhs_ehci,
+};
+
+static struct omap_hwmod omap44xx_usbhs_ehci_hwmod = {
+	.name		= "usb_ehci_hs",
+	.class		= &omap44xx_usbhs_ehci_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap44xx_usbhs_ehci_irqs,
+	.slaves		= omap44xx_usbhs_ehci_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usbhs_ehci_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+/*
+ * The ehci hwmod does not has any sysconfig , so
+ * there is no RESET and IDLE settings.
+ */
+	.flags		= HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_CLOCKACTIVITY),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+	.name = "usb_tll_hs",
+	.sysc = &omap44xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+	{ .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
+	{
+		.name		= "tll",
+		.pa_start	= 0x4a062000,
+		.pa_end		= 0x4a063fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_tll_hs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_tll_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
+	&omap44xx_l4_cfg__usb_tll_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap44xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap44xx_usb_tll_hs_irqs,
+	.main_clk	= "usb_tll_hs_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.slaves		= omap44xx_usb_tll_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+/*
+ * The usbhs controller prevents the enter omap to low power mode
+ * if other than FORCE IDLE for TLL mode too.
+ */
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 
 	/* dmm class */
@@ -5475,13 +5718,18 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	&omap44xx_uart3_hwmod,
 	&omap44xx_uart4_hwmod,
 
+	/* usb host class */
+	&omap44xx_usb_host_hs_hwmod,
+	&omap44xx_usbhs_ohci_hwmod,
+	&omap44xx_usbhs_ehci_hwmod,
+	&omap44xx_usb_tll_hs_hwmod,
+
 	/* usb_otg_hs class */
 	&omap44xx_usb_otg_hs_hwmod,
 
 	/* wd_timer class */
 	&omap44xx_wd_timer2_hwmod,
 	&omap44xx_wd_timer3_hwmod,
-
 	NULL,
 };
 
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ