| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201109272150.42732.rjw@sisk.pl>
Date: Tue, 27 Sep 2011 21:50:42 +0200
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Kevin Hilman <khilman@...com>
Cc: Linux PM mailing list <linux-pm@...ts.linux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>,
"Linux-sh list" <linux-sh@...r.kernel.org>,
Magnus Damm <magnus.damm@...il.com>, jean.pihet@...oldbits.com,
Ming Lei <tom.leiming@...il.com>
Subject: Re: [PATCH 2/3] PM / Runtime: Don't run callbacks under lock for power.irq_safe set
On Tuesday, September 27, 2011, Rafael J. Wysocki wrote:
> On Tuesday, September 27, 2011, Kevin Hilman wrote:
> > "Rafael J. Wysocki" <rjw@...k.pl> writes:
> >
> > > From: Rafael J. Wysocki <rjw@...k.pl>
> > >
> > > The rpm_suspend() and rpm_resume() routines execute subsystem or PM
> > > domain callbacks under power.lock if power.irq_safe is set for the
> > > given device. This is inconsistent with that rpm_idle() does after
> > > commit 02b2677 (PM / Runtime: Allow _put_sync() from
> > > interrupts-disabled context) and is problematic for subsystems and PM
> > > domains wanting to use power.lock for synchronization in their
> > > runtime PM callbacks.
> > >
> > > Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
> >
> > The part described here looks right, and is much better for consistency.
> >
> > Reviewed-by: Kevin Hilman <khilman@...com>
> >
> > but...
> >
> > [...]
> >
> > > @@ -347,6 +353,15 @@ static int rpm_suspend(struct device *de
> > > goto out;
> > > }
> > >
> > > + if (dev->power.irq_safe) {
> > > + spin_unlock(&dev->power.lock);
> > > +
> > > + cpu_relax();
> > > +
> > > + spin_lock(&dev->power.lock);
> > > + goto repeat;
> > > + }
> > > +
> >
> >
> > ... AFAICT, this isn't directly related to the problem described in the
> > changelog (or at least I didn't find it obvious),
>
> It is related. Whether or not it's obvious, I'm not sure. :-)
>
> The problem is that after the changes in __rpm_callback() another CPU may start
> executing the same routine for the same device if dev->power.irq_safe is set
> (previously, it would block on the dev's power.lock) and it may see
> dev->power.runtime_status == RPM_RESUMING or
> dev->power.runtime_status == RPM_SUSPENDING, while previously, it wouldn't
> reach the relevant code. Thus we have to modify that code to take
> the dev->power.irq_safe case into account.
>
> > and probably deserves a comment in the code as well.
>
> Well, the comment in the code would explain why the commit did what it did,
> but it wouldn't be very useful afterwards IMHO.
>
> Perhaps I'll simply add some explanation to the changelog.
Below is the patch with the new changelog, for completness.
---
From: Rafael J. Wysocki <rjw@...k.pl>
Subject: PM / Runtime: Don't run callbacks under lock for power.irq_safe set
The rpm_suspend() and rpm_resume() routines execute subsystem or PM
domain callbacks under power.lock if power.irq_safe is set for the
given device. This is inconsistent with that rpm_idle() does after
commit 02b2677 (PM / Runtime: Allow _put_sync() from
interrupts-disabled context) and is problematic for subsystems and PM
domains wanting to use power.lock for synchronization in their
runtime PM callbacks.
This change requires the code checking if the device's runtime PM
status is RPM_SUSPENDING or RPM_RESUMING to be modified too, to take
the power.irq_safe set case into account (that code wasn't reachable
before with power.irq_safe set, because it's executed with the
device's power.lock held).
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Reviewed-by: Ming Lei <tom.leiming@...il.com>
Reviewed-by: Kevin Hilman <khilman@...com>
---
drivers/base/power/runtime.c | 68 +++++++++++++++++++++++++++++--------------
1 file changed, 46 insertions(+), 22 deletions(-)
Index: linux/drivers/base/power/runtime.c
===================================================================
--- linux.orig/drivers/base/power/runtime.c
+++ linux/drivers/base/power/runtime.c
@@ -155,6 +155,31 @@ static int rpm_check_suspend_allowed(str
}
/**
+ * __rpm_callback - Run a given runtime PM callback for a given device.
+ * @cb: Runtime PM callback to run.
+ * @dev: Device to run the callback for.
+ */
+static int __rpm_callback(int (*cb)(struct device *), struct device *dev)
+ __releases(&dev->power.lock) __acquires(&dev->power.lock)
+{
+ int retval;
+
+ if (dev->power.irq_safe)
+ spin_unlock(&dev->power.lock);
+ else
+ spin_unlock_irq(&dev->power.lock);
+
+ retval = cb(dev);
+
+ if (dev->power.irq_safe)
+ spin_lock(&dev->power.lock);
+ else
+ spin_lock_irq(&dev->power.lock);
+
+ return retval;
+}
+
+/**
* rpm_idle - Notify device bus type if the device can be suspended.
* @dev: Device to notify the bus type about.
* @rpmflags: Flag bits.
@@ -225,19 +250,8 @@ static int rpm_idle(struct device *dev,
else
callback = NULL;
- if (callback) {
- if (dev->power.irq_safe)
- spin_unlock(&dev->power.lock);
- else
- spin_unlock_irq(&dev->power.lock);
-
- callback(dev);
-
- if (dev->power.irq_safe)
- spin_lock(&dev->power.lock);
- else
- spin_lock_irq(&dev->power.lock);
- }
+ if (callback)
+ __rpm_callback(callback, dev);
dev->power.idle_notification = false;
wake_up_all(&dev->power.wait_queue);
@@ -252,22 +266,14 @@ static int rpm_idle(struct device *dev,
* @dev: Device to run the callback for.
*/
static int rpm_callback(int (*cb)(struct device *), struct device *dev)
- __releases(&dev->power.lock) __acquires(&dev->power.lock)
{
int retval;
if (!cb)
return -ENOSYS;
- if (dev->power.irq_safe) {
- retval = cb(dev);
- } else {
- spin_unlock_irq(&dev->power.lock);
-
- retval = cb(dev);
+ retval = __rpm_callback(cb, dev);
- spin_lock_irq(&dev->power.lock);
- }
dev->power.runtime_error = retval;
return retval != -EACCES ? retval : -EIO;
}
@@ -347,6 +353,15 @@ static int rpm_suspend(struct device *de
goto out;
}
+ if (dev->power.irq_safe) {
+ spin_unlock(&dev->power.lock);
+
+ cpu_relax();
+
+ spin_lock(&dev->power.lock);
+ goto repeat;
+ }
+
/* Wait for the other suspend running in parallel with us. */
for (;;) {
prepare_to_wait(&dev->power.wait_queue, &wait,
@@ -496,6 +511,15 @@ static int rpm_resume(struct device *dev
goto out;
}
+ if (dev->power.irq_safe) {
+ spin_unlock(&dev->power.lock);
+
+ cpu_relax();
+
+ spin_lock(&dev->power.lock);
+ goto repeat;
+ }
+
/* Wait for the operation carried out in parallel with us. */
for (;;) {
prepare_to_wait(&dev->power.wait_queue, &wait,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists