| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1317243959-26383-3-git-send-email-sboyd@codeaurora.org>
Date: Wed, 28 Sep 2011 14:05:59 -0700
From: Stephen Boyd <sboyd@...eaurora.org>
To: David Brown <davidb@...eaurora.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960
Add support for DEBUG_LL on the 8660 and 8960 development boards.
While we're here, cleanup the uncompress.h code a bit.
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
---
arch/arm/Kconfig.debug | 16 ++++++++++++
arch/arm/mach-msm/Kconfig | 3 ++
arch/arm/mach-msm/include/mach/debug-macro.S | 27 ++++++++++++++++++++
arch/arm/mach-msm/include/mach/msm_iomap-8960.h | 5 +++
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 5 +++
arch/arm/mach-msm/include/mach/uncompress.h | 31 +++++++++++++++++------
arch/arm/mach-msm/io.c | 6 ++++
7 files changed, 85 insertions(+), 8 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 35eebad..72e7aeb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -141,6 +141,22 @@ choice
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
+ config DEBUG_MSM8660_UART
+ bool "Kernel low-level debugging messages via MSM 8660 UART"
+ depends on ARCH_MSM8X60
+ select MSM_HAS_DEBUG_UART_HS
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on MSM 8960 devices.
+
+ config DEBUG_MSM8960_UART
+ bool "Kernel low-level debugging messages via MSM 8960 UART"
+ depends on ARCH_MSM8960
+ select MSM_HAS_DEBUG_UART_HS
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on MSM 8960 devices.
+
endchoice
config EARLY_PRINTK
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 5b07b61..000ddf0 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -60,6 +60,9 @@ config ARCH_MSM8960
endchoice
+config MSM_HAS_DEBUG_UART_HS
+ bool
+
config MSM_SOC_REV_A
bool
config ARCH_MSM_SCORPIONMP
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 3120691..8fa4e87 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -1,6 +1,7 @@
/*
*
* Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@...gle.com>
*
* This software is licensed under the terms of the GNU General Public
@@ -23,15 +24,41 @@
.endm
.macro senduart,rd,rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+ @ Clear TX_READY by writing to the UARTDM_CR register
+ mov r12, #0x300
+ str r12, [\rx, #0x10]
+ @ Write 0x1 to NCF register
+ mov r12, #0x1
+ str r12, [\rx, #0x40]
+ @ UARTDM reg. Read to induce delay
+ ldr r12, [\rx, #0x08]
+ @ Write the 1 character to UARTDM_TF
+ str \rd, [\rx, #0x70]
+#else
teq \rx, #0
strne \rd, [\rx, #0x0C]
+#endif
.endm
.macro waituart,rd,rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+ @ check for TX_EMT in UARTDM_SR
+ ldr \rd, [\rx, #0x08]
+ tst \rd, #0x08
+ bne 1002f
+ @ wait for TXREADY in UARTDM_ISR
+1001: ldreq \rd, [\rx, #0x14]
+ tst \rd, #0x80
+ dsb
+ beq 1001b
+#else
@ wait for TX_READY
1001: ldr \rd, [\rx, #0x08]
tst \rd, #0x04
beq 1001b
+#endif
+1002:
.endm
.macro busyuart,rd,rx
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
index 3c9d960..800b557 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
@@ -45,4 +45,9 @@
#define MSM8960_TMR0_PHYS 0x0208A000
#define MSM8960_TMR0_SIZE SZ_4K
+#ifdef CONFIG_DEBUG_MSM8960_UART
+#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_PHYS 0x16440000
+#endif
+
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 3b19b8f..54e12ca 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -62,4 +62,9 @@
#define MSM8X60_TMR0_PHYS 0x02040000
#define MSM8X60_TMR0_SIZE SZ_4K
+#ifdef CONFIG_DEBUG_MSM8660_UART
+#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_PHYS 0x19C40000
+#endif
+
#endif
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index d94292c..ee906e4 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/uncompress.h
- *
+/*
* Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -14,17 +14,32 @@
*/
#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+#define __ASM_ARCH_MSM_UNCOMPRESS_H
-#include "hardware.h"
-#include "linux/io.h"
-#include "mach/msm_iomap.h"
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <mach/msm_iomap.h>
static void putc(int c)
{
#if defined(MSM_DEBUG_UART_PHYS)
- unsigned base = MSM_DEBUG_UART_PHYS;
- while (!(readl(base + 0x08) & 0x04)) ;
- writel(c, base + 0x0c);
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+ /*
+ * Wait for TX_READY to be set; but skip it if we have a
+ * TX underrun.
+ */
+ if (readl_relaxed(MSM_DEBUG_UART_PHYS + 0x08) & 0x08)
+ while (!(readl_relaxed(MSM_DEBUG_UART_PHYS + 0x14) & 0x80))
+ cpu_relax();
+
+ writel_relaxed(0x300, MSM_DEBUG_UART_PHYS + 0x10);
+ writel_relaxed(0x1, MSM_DEBUG_UART_PHYS + 0x40);
+ writel_relaxed(c, MSM_DEBUG_UART_PHYS + 0x70);
+#else
+ while (!(readl_relaxed(MSM_DEBUG_UART_PHYS + 0x08) & 0x04))
+ cpu_relax();
+ writel_relaxed(c, MSM_DEBUG_UART_PHYS + 0x0c);
+#endif
#endif
}
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 03036af..578b04e 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -111,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
MSM_CHIP_DEVICE(TMR0, MSM8X60),
MSM_DEVICE(ACC),
MSM_DEVICE(GCC),
+#ifdef CONFIG_DEBUG_MSM8660_UART
+ MSM_DEVICE(DEBUG_UART),
+#endif
};
void __init msm_map_msm8x60_io(void)
@@ -125,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = {
MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
MSM_CHIP_DEVICE(TMR, MSM8960),
MSM_CHIP_DEVICE(TMR0, MSM8960),
+#ifdef CONFIG_DEBUG_MSM8960_UART
+ MSM_DEVICE(DEBUG_UART),
+#endif
};
void __init msm_map_msm8960_io(void)
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists