| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.00.1109300107150.32653@utopia.booyaka.com>
Date: Fri, 30 Sep 2011 01:12:35 -0600 (MDT)
From: Paul Walmsley <paul@...an.com>
To: Keshava Munegowda <keshava_mgowda@...com>
cc: linux-usb@...r.kernel.org, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, balbi@...com, khilman@...com,
b-cousson@...com, gadiyar@...com, sameo@...ux.intel.com,
parthab@...ia.ti.com, tony@...mide.com, johnstul@...ibm.com,
vishwanath.bs@...com
Subject: Re: [PATCH 2/5 v12] arm: omap: usb: ehci and ohci hwmod structures
for omap3
Hi
a few comments
On Fri, 30 Sep 2011, Keshava Munegowda wrote:
> Following 2 hwmod structures are added
> 1. usb_host_hs
> The hwmod of usbhs with uhh, ehci and ohci base addresses
> functional clock and ehci, ohci irqs
>
> 2. usb_tll_hs
> hwmod of usbhs with the TLL base address and irq.
>
> Signed-off-by: Keshava Munegowda <keshava_mgowda@...com>
> Reviewed-by: Partha Basak <parthab@...ia.ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 195 ++++++++++++++++++++++++++++
> 1 files changed, 195 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> index 59fdb9f..bc17493 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -84,6 +84,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
> static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
> static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
> static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
> +static struct omap_hwmod omap34xx_usb_host_hs_hwmod;
> +static struct omap_hwmod omap34xx_usb_tll_hs_hwmod;
>
> /* L3 -> L4_CORE interface */
> static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
> @@ -3196,6 +3198,194 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
> .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> };
>
> +/*
> + * 'usb_host_hs' class
> + * high-speed multi-port usb host controller
> + */
> +static struct omap_hwmod_ocp_if omap34xx_usb_host_hs__l3_main_2 = {
> + .master = &omap34xx_usb_host_hs_hwmod,
> + .slave = &omap3xxx_l3_main_hwmod,
> + .clk = "core_l3_ick",
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_class_sysconfig omap34xx_usb_host_hs_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
This register has other bitfields. Please include them.
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class omap34xx_usb_host_hs_hwmod_class = {
> + .name = "usb_host_hs",
> + .sysc = &omap34xx_usb_host_hs_sysc,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usb_host_hs_masters[] = {
> + &omap34xx_usb_host_hs__l3_main_2,
> +};
> +
> +static struct omap_hwmod_addr_space omap34xx_usb_host_hs_addrs[] = {
> + {
> + .name = "uhh",
> + .pa_start = 0x48064000,
> + .pa_end = 0x480643ff,
> + .flags = ADDR_TYPE_RT
> + },
> + {
> + .name = "ohci",
> + .pa_start = 0x48064400,
> + .pa_end = 0x480647ff,
> + },
> + {
> + .name = "ehci",
> + .pa_start = 0x48064800,
> + .pa_end = 0x48064cff,
> + },
> + {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_l4_cfg__usb_host_hs = {
> + .master = &omap3xxx_l4_core_hwmod,
> + .slave = &omap34xx_usb_host_hs_hwmod,
> + .clk = "l4_ick",
> + .addr = omap34xx_usb_host_hs_addrs,
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_usb_host_hs__ick = {
> + .clk = "usbhost_ick",
> + .user = OCP_USER_MPU,
> + .flags = OCPIF_SWSUP_IDLE,
Does this really need OCPIF_SWSUP_IDLE? If so, then there is a hardware
bug, and some explanation is needed.
> +};
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usb_host_hs_slaves[] = {
> + &omap34xx_l4_cfg__usb_host_hs,
> + &omap34xx_usb_host_hs__ick,
> +};
> +
> +static struct omap_hwmod_opt_clk omap34xx_usb_host_hs_opt_clks[] = {
> + { .role = "usbhost_fck2", .clk = "usbhost_120m_fck", },
The role here doesn't need "usbhost" in its name -- ideally it would be
something like "120m_fck" or "ehci_logic_fck".
> +};
> +
> +static struct omap_hwmod_irq_info omap34xx_usb_host_hs_irqs[] = {
> + { .name = "ohci-irq", .irq = 76 },
> + { .name = "ehci-irq", .irq = 77 },
> + { .irq = -1 }
> +};
> +
> +static struct omap_hwmod omap34xx_usb_host_hs_hwmod = {
> + .name = "usb_host_hs",
> + .class = &omap34xx_usb_host_hs_hwmod_class,
> + .clkdm_name = "l3_init_clkdm",
> + .mpu_irqs = omap34xx_usb_host_hs_irqs,
> + .main_clk = "usbhost_48m_fck",
> + .prcm = {
> + .omap2 = {
> + .module_offs = OMAP3430ES2_USBHOST_MOD,
> + .prcm_reg_id = 1,
> + .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
> + .idlest_reg_id = 1,
> + .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
> + .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
> + },
> + },
> + .opt_clks = omap34xx_usb_host_hs_opt_clks,
> + .opt_clks_cnt = ARRAY_SIZE(omap34xx_usb_host_hs_opt_clks),
> + .slaves = omap34xx_usb_host_hs_slaves,
> + .slaves_cnt = ARRAY_SIZE(omap34xx_usb_host_hs_slaves),
> + .masters = omap34xx_usb_host_hs_masters,
> + .masters_cnt = ARRAY_SIZE(omap34xx_usb_host_hs_masters),
> +/*
> + * The usbhs controller prevents the enter omap to low power mode
> + * if other than FORCE IDLE and FORCE STANDBY are used.
> + */
> + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> +};
> +
> +/*
> + * 'usb_tll_hs' class
> + * usb_tll_hs module is the adapter on the usb_host_hs ports
> + */
> +static struct omap_hwmod_class_sysconfig omap34xx_usb_tll_hs_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
> + SYSC_HAS_SOFTRESET | SYSC_HAS_ENAWAKEUP |
> + SYSC_HAS_CLOCKACTIVITY),
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class omap34xx_usb_tll_hs_hwmod_class = {
> + .name = "usb_tll_hs",
> + .sysc = &omap34xx_usb_tll_hs_sysc,
> +};
> +
> +static struct omap_hwmod_irq_info omap34xx_usb_tll_hs_irqs[] = {
> + { .name = "tll-irq", .irq = 78 },
> + { .irq = -1 }
> +};
> +
> +static struct omap_hwmod_addr_space omap34xx_usb_tll_hs_addrs[] = {
> + {
> + .name = "tll",
> + .pa_start = 0x48062000,
> + .pa_end = 0x48062fff,
> + .flags = ADDR_TYPE_RT
> + },
> + {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_f_cfg__usb_tll_hs = {
> + .clk = "usbtll_ick",
> + .user = OCP_USER_MPU,
> + .flags = OCPIF_SWSUP_IDLE,
> +};
Does this really need OCPIF_SWSUP_IDLE? If so, then there is a hardware
bug, and some explanation is needed.
> +
> +static struct omap_hwmod_ocp_if omap34xx_l4_cfg__usb_tll_hs = {
> + .master = &omap3xxx_l4_core_hwmod,
> + .slave = &omap34xx_usb_tll_hs_hwmod,
> + .clk = "l4_ick",
> + .addr = omap34xx_usb_tll_hs_addrs,
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usb_tll_hs_slaves[] = {
> + &omap34xx_l4_cfg__usb_tll_hs,
> + &omap34xx_f_cfg__usb_tll_hs,
> +};
> +
> +static struct omap_hwmod omap34xx_usb_tll_hs_hwmod = {
> + .name = "usb_tll_hs",
> + .class = &omap34xx_usb_tll_hs_hwmod_class,
> + .clkdm_name = "l3_init_clkdm",
> + .mpu_irqs = omap34xx_usb_tll_hs_irqs,
> + .main_clk = "usbtll_fck",
> + .prcm = {
> + .omap2 = {
> + .module_offs = CORE_MOD,
> + .prcm_reg_id = 3,
> + .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
> + .idlest_reg_id = 3,
> + .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
> + },
> + },
> + .slaves = omap34xx_usb_tll_hs_slaves,
> + .slaves_cnt = ARRAY_SIZE(omap34xx_usb_tll_hs_slaves),
> +/*
> + * The usbhs controller prevents the enter omap to low power mode
> + * if other than FORCE IDLE for TLL mode too.
> + */
> + .flags = HWMOD_SWSUP_SIDLE,
> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> +};
> +
> static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
> &omap3xxx_l3_main_hwmod,
> &omap3xxx_l4_core_hwmod,
> @@ -3225,6 +3415,11 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
> &omap3xxx_uart2_hwmod,
> &omap3xxx_uart3_hwmod,
> &omap3xxx_uart4_hwmod,
> +
> + /* usb host class */
> + &omap34xx_usb_host_hs_hwmod,
> + &omap34xx_usb_tll_hs_hwmod,
> +
> /* dss class */
> &omap3430es1_dss_core_hwmod,
> &omap3xxx_dss_core_hwmod,
> --
> 1.6.0.4
>
- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists