| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1317418715-9666-1-git-send-email-alexandre.bounine@idt.com>
Date: Fri, 30 Sep 2011 17:38:34 -0400
From: Alexandre Bounine <alexandre.bounine@....com>
To: akpm@...ux-foundation.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org
Cc: Alexandre Bounine <alexandre.bounine@....com>,
Vinod Koul <vinod.koul@...el.com>,
Kumar Gala <galak@...nel.crashing.org>,
Matt Porter <mporter@...nel.crashing.org>,
Li Yang <leoli@...escale.com>
Subject: [RFC PATCH 1/2] RapidIO: Add DMA Engine support for RIO data transfers
Adds DMA Engine framework support into RapidIO subsystem.
Uses DMA Engine DMA_SLAVE interface to generate data transfers to/from remote
RapidIO target devices. Uses scatterlist to describe local data buffer and
dma_chan.private member to pass target specific information. Supports flat
data buffer only for a remote side.
Signed-off-by: Alexandre Bounine <alexandre.bounine@....com>
Cc: Vinod Koul <vinod.koul@...el.com>
Cc: Kumar Gala <galak@...nel.crashing.org>
Cc: Matt Porter <mporter@...nel.crashing.org>
Cc: Li Yang <leoli@...escale.com>
---
drivers/dma/dmaengine.c | 4 ++
drivers/rapidio/Kconfig | 6 +++
drivers/rapidio/rio.c | 79 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/dmaengine.h | 1 +
include/linux/rio.h | 47 ++++++++++++++++++++++++++
include/linux/rio_drv.h | 9 +++++
6 files changed, 146 insertions(+), 0 deletions(-)
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index b48967b..11fdc2c 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -699,6 +699,10 @@ int dma_async_device_register(struct dma_device *device)
!device->device_prep_dma_cyclic);
BUG_ON(dma_has_cap(DMA_SLAVE, device->cap_mask) &&
!device->device_control);
+ BUG_ON(dma_has_cap(DMA_RAPIDIO, device->cap_mask) &&
+ !device->device_prep_slave_sg);
+ BUG_ON(dma_has_cap(DMA_RAPIDIO, device->cap_mask) &&
+ !device->device_control);
BUG_ON(!device->device_alloc_chan_resources);
BUG_ON(!device->device_free_chan_resources);
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index bc87192..c4aa279 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -34,3 +34,9 @@ config RAPIDIO_DEBUG
If you are unsure about this, say N here.
source "drivers/rapidio/switches/Kconfig"
+
+# This option to be turned on by a device selection
+config RAPIDIO_DMA_ENGINE
+ bool
+ select DMADEVICES
+ select DMA_ENGINE
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 86c9a09..e5905fc 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1121,6 +1121,85 @@ int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
return 0;
}
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+#include <linux/dmaengine.h>
+
+static bool rio_chan_filter(struct dma_chan *chan, void *arg)
+{
+ struct rio_dev *rdev = arg;
+
+ /* Check that DMA device belongs to the right MPORT */
+ return (rdev->net->hport ==
+ container_of(chan->device, struct rio_mport, dma));
+}
+
+/**
+ * rio_request_dma - request RapidIO capable DMA channel that supports
+ * specified target RapidIO device.
+ * @rdev: RIO device control structure
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_dma(struct rio_dev *rdev)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *dchan;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_RAPIDIO, mask);
+ dchan = dma_request_channel(mask, rio_chan_filter, rdev);
+
+ return dchan;
+}
+EXPORT_SYMBOL_GPL(rio_request_dma);
+
+/**
+ * rio_release_dma - release specified DMA channel
+ * @dchan: DMA channel to release
+ */
+void rio_release_dma(struct dma_chan *dchan)
+{
+ dma_release_channel(dchan);
+}
+EXPORT_SYMBOL_GPL(rio_release_dma);
+
+/**
+ * rio_dma_prep_slave_sg - RapidIO specific wrapper
+ * for device_prep_slave_sg callback defined by DMAENGINE.
+ * @rdev: RIO device control structure
+ * @dchan: DMA channel to configure
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ * Returns pointer to DMA transaction descriptor or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(struct rio_dev *rdev,
+ struct dma_chan *dchan, struct rio_dma_data *data,
+ enum dma_data_direction direction, unsigned long flags)
+{
+ struct dma_async_tx_descriptor *txd = NULL;
+ struct rio_dma_ext rio_ext;
+
+ rio_ext.destid = rdev->destid;
+ rio_ext.rio_addr_u = data->rio_addr_u;
+ rio_ext.rio_addr = data->rio_addr;
+ rio_ext.wr_type = data->wr_type;
+ dchan->private = &rio_ext;
+
+ txd = dchan->device->device_prep_slave_sg(dchan, data->sg, data->sg_len,
+ direction, flags);
+
+ return txd;
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
static void rio_fixup_device(struct rio_dev *dev)
{
}
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8fbf40e..867b685 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -70,6 +70,7 @@ enum dma_transaction_type {
DMA_PRIVATE,
DMA_ASYNC_TX,
DMA_SLAVE,
+ DMA_RAPIDIO,
DMA_CYCLIC,
};
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 4d50611..a6d1054c 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -20,6 +20,9 @@
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/rio_regs.h>
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+#include <linux/dmaengine.h>
+#endif
#define RIO_NO_HOPCOUNT -1
#define RIO_INVALID_DESTID 0xffff
@@ -254,6 +257,9 @@ struct rio_mport {
u32 phys_efptr;
unsigned char name[40];
void *priv; /* Master port private data */
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ struct dma_device dma;
+#endif
};
/**
@@ -395,6 +401,47 @@ union rio_pw_msg {
u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)];
};
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+/**
+ * enum rio_write_type - RIO write transaction types used in DMA transfers
+ *
+ * Note: RapidIO specification defines write (NWRITE) and
+ * write-with-response (NWRITE_R) data transfer operations.
+ * Existing DMA controllers that service RapidIO may use one of these operations
+ * for entire data transfer or their combination with only the last data packet
+ * requires response.
+ */
+enum rio_write_type {
+ RDW_DEFAULT, /* default method used by DMA driver */
+ RDW_ALL_NWRITE, /* all packets use NWRITE */
+ RDW_ALL_NWRITE_R, /* all packets use NWRITE_R */
+ RDW_LAST_NWRITE_R, /* last packet uses NWRITE_R, all other - NWRITE */
+};
+
+struct rio_dma_ext {
+ u16 destid;
+ u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */
+ u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */
+ enum rio_write_type wr_type; /* preferred RIO write operation type */
+};
+
+struct rio_dma_data {
+ /* Local data (as scatterlist) */
+ struct scatterlist *sg; /* I/O scatter list */
+ unsigned int sg_len; /* size of scatter list */
+ /* Remote device address (flat buffer) */
+ u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */
+ u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */
+ enum rio_write_type wr_type; /* preferred RIO write operation type */
+};
+
+static inline struct rio_mport *dma_to_mport(struct dma_device *ddev)
+{
+ return container_of(ddev, struct rio_mport, dma);
+}
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
/* Architecture and hardware-specific functions */
extern int rio_register_mport(struct rio_mport *);
extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index 229b3ca..d140996 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -378,6 +378,15 @@ void rio_unregister_driver(struct rio_driver *);
struct rio_dev *rio_dev_get(struct rio_dev *);
void rio_dev_put(struct rio_dev *);
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+extern struct dma_chan *rio_request_dma(struct rio_dev *rdev);
+extern void rio_release_dma(struct dma_chan *dchan);
+extern struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(
+ struct rio_dev *rdev, struct dma_chan *dchan,
+ struct rio_dma_data *data, enum dma_data_direction direction,
+ unsigned long flags);
+#endif
+
/**
* rio_name - Get the unique RIO device identifier
* @rdev: RIO device
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists