| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1317904910-14095-1-git-send-email-mgorman@suse.de>
Date: Thu, 6 Oct 2011 13:41:36 +0100
From: Mel Gorman <mgorman@...e.de>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Linux-MM <linux-mm@...ck.org>,
Linux-Netdev <netdev@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
David Miller <davem@...emloft.net>, Neil Brown <neilb@...e.de>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
Mel Gorman <mgorman@...e.de>
Subject: [PATCH 00/14] Swap-over-NBD without deadlocking V7
Testing rattled out a few bugs in process throttling. Otherwise,
very little has changed.
Changelog since V6
o Rebase to 3.1-rc8
o Use wake_up instead of wake_up_interruptible()
o Do not throttle kernel threads
o Avoid a potential race between kswapd going to sleep and processes being
throttled
Changelog since V5
o Rebase to 3.1-rc5
Changelog since V4
o Update comment clarifying what protocols can be used (Michal)
o Rebase to 3.0-rc3
Changelog since V3
o Propogate pfmemalloc from packet fragment pages to skb (Neil)
o Rebase to 3.0-rc2
Changelog since V2
o Document that __GFP_NOMEMALLOC overrides __GFP_MEMALLOC (Neil)
o Use wait_event_interruptible (Neil)
o Use !! when casting to bool to avoid any possibilitity of type
truncation (Neil)
o Nicer logic when using skb_pfmemalloc_protocol (Neil)
Changelog since V1
o Rebase on top of mmotm
o Use atomic_t for memalloc_socks (David Miller)
o Remove use of sk_memalloc_socks in vmscan (Neil Brown)
o Check throttle within prepare_to_wait (Neil Brown)
o Add statistics on throttling instead of printk
When a user or administrator requires swap for their application, they
create a swap partition and file, format it with mkswap and activate
it with swapon. Swap over the network is considered as an option in
diskless systems. The two likely scenarios are when blade servers
are used as part of a cluster where the form factor or maintenance
costs do not allow the use of disks and thin clients.
The Linux Terminal Server Project recommends the use of the
Network Block Device (NBD) for swap according to the manual at
https://sourceforge.net/projects/ltsp/files/Docs-Admin-Guide/LTSPManual.pdf/download
. There is also documentation and tutorials
on how to setup swap over NBD at places like
https://help.ubuntu.com/community/UbuntuLTSP/EnableNBDSWAP . The
nbd-client also documents the use of NBD as swap. Despite this, the
fact is that a machine using NBD for swap can deadlock within minutes
if swap is used intensively. This patch series addresses the problem.
The core issue is that network block devices do not use mempools
like normal block devices do. As the host cannot control where they
receive packets from, they cannot reliably work out in advance how
much memory they might need.
Some years ago, Peter Ziljstra developed a series of patches that
supported swap over an NFS that some distributions are carrying in
their kernels. This patch series borrows very heavily from Peter's
work to support swapping over NBD as a pre-requisite to supporting
swap-over-NFS. The bulk of the complexity is concerned with preserving
memory that is allocated from the PFMEMALLOC reserves for use by the
network layer which is needed for both NBD and NFS.
Patch 1 serialises access to min_free_kbytes. It's not strictly needed
by this series but as the series cares about watermarks in
general, it's a harmless fix. It could be merged independently.
Patch 2 adds knowledge of the PFMEMALLOC reserves to SLAB and SLUB to
preserve access to pages allocated under low memory situations
to callers that are freeying memory.
Patch 3 introduces __GFP_MEMALLOC to allow access to the PFMEMALLOC
reserves without setting PFMEMALLOC.
Patch 4 opens the possibility for softirqs to use PFMEMALLOC reserves
for later use by network packet processing.
Patch 5 ignores memory policies when ALLOC_NO_WATERMARKS is set.
Patches 6-10 allows network processing to use PFMEMALLOC reserves when
the socket has been marked as being used by the VM to clean
pages. If packets are received and stored in pages that were
allocated under low-memory situations and are unrelated to
the VM, the packets are dropped.
Patch 11 is a micro-optimisation to avoid a function call in the
common case.
Patch 12 tags NBD sockets as being SOCK_MEMALLOC so they can use
PFMEMALLOC if necessary.
Patch 13 notes that it is still possible for the PFMEMALLOC reserve
to be depleted. To prevent this, direct reclaimers get
throttled on a waitqueue if 50% of the PFMEMALLOC reserves are
depleted. It is expected that kswapd and the direct reclaimers
already running will clean enough pages for the low watermark
to be reached and the throttled processes are woken up.
Patch 14 adds a statistic to track how often processes get throttled
Some basic performance testing was run using kernel builds, netperf
on loopback for UDP and TCP, hackbench (pipes and sockets), iozone
and sysbench. Each of them were expected to use the sl*b allocators
reasonably heavily but there did not appear to be significant
performance variances. Here is the results from netperf using
slab as an example
NETPERF UDP
64 237.47 ( 0.00%) 237.34 (-0.05%)
128 472.69 ( 0.00%) 465.96 (-1.44%)
256 926.82 ( 0.00%) 948.40 ( 2.28%)
1024 3260.08 ( 0.00%) 3266.50 ( 0.20%)
2048 5535.11 ( 0.00%) 5453.55 (-1.50%)
3312 7496.60 ( 0.00%)* 7574.44 ( 1.03%)
1.12% 1.00%
4096 8266.35 ( 0.00%)* 8240.06 (-0.32%)*
1.18% 1.49%
8192 11026.01 ( 0.00%) 11010.44 (-0.14%)
16384 14653.98 ( 0.00%) 14666.97 ( 0.09%)
MMTests Statistics: duration
User/Sys Time Running Test (seconds) 2156.64 1873.27
Total Elapsed Time (seconds) 2570.09 2234.10
NETPERF TCP
netperf-tcp tcp-swapnbd
vanilla-slab v4r3-slab
64 1250.76 ( 0.00%) 1256.52 ( 0.46%)
128 2290.70 ( 0.00%) 2336.43 ( 1.96%)
256 3668.42 ( 0.00%) 3751.17 ( 2.21%)
1024 7214.33 ( 0.00%) 7237.23 ( 0.32%)
2048 8230.01 ( 0.00%) 8280.02 ( 0.60%)
3312 8634.95 ( 0.00%) 8758.62 ( 1.41%)
4096 8851.18 ( 0.00%) 9045.88 ( 2.15%)
8192 10067.59 ( 0.00%) 10263.30 ( 1.91%)
16384 11523.26 ( 0.00%) 11654.78 ( 1.13%)
MMTests Statistics: duration
User/Sys Time Running Test (seconds) 1450.23 1389.8
Total Elapsed Time (seconds) 1450.41 1390.35
Here is the equivalent test for SLUB
netperf-udp udp-swapnbd
vanilla-slub v4r3-slub
64 235.33 ( 0.00%) 237.80 ( 1.04%)
128 465.92 ( 0.00%) 469.98 ( 0.86%)
256 907.16 ( 0.00%) 907.58 ( 0.05%)
1024 3240.25 ( 0.00%) 3255.56 ( 0.47%)
2048 5564.87 ( 0.00%) 5446.46 (-2.17%)
3312 7427.65 ( 0.00%)* 7650.00 ( 2.91%)
1.33% 1.00%
4096 8004.51 ( 0.00%)* 8132.79 ( 1.58%)*
1.05% 1.21%
8192 11079.60 ( 0.00%) 10927.09 (-1.40%)
16384 14737.38 ( 0.00%) 15019.50 ( 1.88%)
MMTests Statistics: duration
User/Sys Time Running Test (seconds) 2056.21 2160.38
Total Elapsed Time (seconds) 2426.09 2498.16
NETPERF TCP
netperf-tcp tcp-swapnbd
vanilla-slub v4r3-slub
64 1251.64 ( 0.00%) 1262.89 ( 0.89%)
128 2289.88 ( 0.00%) 2332.94 ( 1.85%)
256 3654.34 ( 0.00%) 3736.48 ( 2.20%)
1024 7192.47 ( 0.00%) 7286.96 ( 1.30%)
2048 8243.55 ( 0.00%) 8291.50 ( 0.58%)
3312 8664.16 ( 0.00%) 8799.88 ( 1.54%)
4096 8869.13 ( 0.00%) 9018.12 ( 1.65%)
8192 10009.53 ( 0.00%) 10214.26 ( 2.00%)
16384 11470.78 ( 0.00%) 11685.20 ( 1.83%)
MMTests Statistics: duration
User/Sys Time Running Test (seconds) 1368.28 1511.81
Total Elapsed Time (seconds) 1370.33 1510.42
Time to completion varied a lot but this can happen with netperf as
it tries to find results within a sufficiently high confidence. There
were some small gains and losses but they are close to the variances
seen between kernel releases.
For testing swap-over-NBD, a machine was booted with 2G of RAM with a
swapfile backed by NBD. 8*NUM_CPU processes were started that create
anonymous memory mappings and read them linearly in a loop. The total
size of the mappings were 4*PHYSICAL_MEMORY to use swap heavily under
memory pressure. Without the patches, the machine locks up within
minutes and runs to completion with them applied.
drivers/block/nbd.c | 7 +-
include/linux/gfp.h | 13 ++-
include/linux/mm_types.h | 9 ++
include/linux/mmzone.h | 1 +
include/linux/sched.h | 7 +
include/linux/skbuff.h | 21 +++-
include/linux/slub_def.h | 1 +
include/linux/vm_event_item.h | 1 +
include/net/sock.h | 19 +++
include/trace/events/gfpflags.h | 1 +
kernel/softirq.c | 3 +
mm/page_alloc.c | 57 +++++++--
mm/slab.c | 240 +++++++++++++++++++++++++++++++++------
mm/slub.c | 35 +++++-
mm/vmscan.c | 72 ++++++++++++
mm/vmstat.c | 1 +
net/core/dev.c | 48 +++++++-
net/core/filter.c | 8 ++
net/core/skbuff.c | 95 +++++++++++++---
net/core/sock.c | 42 +++++++
net/ipv4/tcp.c | 3 +-
net/ipv4/tcp_output.c | 13 +-
net/ipv6/tcp_ipv6.c | 12 ++-
23 files changed, 623 insertions(+), 86 deletions(-)
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists