| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201110131259.35664.bzolnier@gmail.com>
Date: Thu, 13 Oct 2011 12:59:35 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: Jeff Garzik <jgarzik@...ox.com>
Cc: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] pata_artop: add Power Management support
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] pata_artop: add Power Management support
Fixes IDE -> libata regression.
There shouldn't be any problems with it as corresponding IDE's host
driver (aec62xx) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
earlier references:
https://lkml.org/lkml/2009/11/25/314
drivers/ata/pata_artop.c | 81 +++++++++++++++++++++++++++++++----------------
1 file changed, 54 insertions(+), 27 deletions(-)
Index: b/drivers/ata/pata_artop.c
===================================================================
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -2,7 +2,7 @@
* pata_artop.c - ARTOP ATA controller driver
*
* (C) 2006 Red Hat
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2011 Bartlomiej Zolnierkiewicz
*
* Based in part on drivers/ide/pci/aec62xx.c
* Copyright (C) 1999-2002 Andre Hedrick <andre@...ux-ide.org>
@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.4.6"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -313,6 +313,33 @@ static struct ata_port_operations artop6
.prereset = artop62x0_pre_reset,
};
+static void atp8xx_fixup(struct pci_dev *pdev)
+{
+ if (pdev->device == 0x0005)
+ /* BIOS may have left us in UDMA, clear it before libata probe */
+ pci_write_config_byte(pdev, 0x54, 0);
+ else if (pdev->device == 0x0008 || pdev->device == 0x0009) {
+ u8 reg;
+
+ /* Mac systems come up with some registers not set as we
+ will need them */
+
+ /* Clear reset & test bits */
+ pci_read_config_byte(pdev, 0x49, ®);
+ pci_write_config_byte(pdev, 0x49, reg & ~0x30);
+
+ /* PCI latency must be > 0x80 for burst mode, tweak it
+ * if required.
+ */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®);
+ if (reg <= 0x80)
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
+
+ /* Enable IRQ output and burst mode */
+ pci_read_config_byte(pdev, 0x4a, ®);
+ pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ }
+}
/**
* artop_init_one - Register ARTOP ATA PCI device with kernel services
@@ -370,42 +397,22 @@ static int artop_init_one (struct pci_de
if (rc)
return rc;
- if (id->driver_data == 0) { /* 6210 variant */
+ if (id->driver_data == 0) /* 6210 variant */
ppi[0] = &info_6210;
- /* BIOS may have left us in UDMA, clear it before libata probe */
- pci_write_config_byte(pdev, 0x54, 0);
- }
else if (id->driver_data == 1) /* 6260 */
ppi[0] = &info_626x;
else if (id->driver_data == 2) { /* 6280 or 6280 + fast */
unsigned long io = pci_resource_start(pdev, 4);
- u8 reg;
ppi[0] = &info_628x;
if (inb(io) & 0x10)
ppi[0] = &info_628x_fast;
- /* Mac systems come up with some registers not set as we
- will need them */
-
- /* Clear reset & test bits */
- pci_read_config_byte(pdev, 0x49, ®);
- pci_write_config_byte(pdev, 0x49, reg & ~ 0x30);
-
- /* PCI latency must be > 0x80 for burst mode, tweak it
- * if required.
- */
- pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®);
- if (reg <= 0x80)
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
-
- /* Enable IRQ output and burst mode */
- pci_read_config_byte(pdev, 0x4a, ®);
- pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
-
}
BUG_ON(ppi[0] == NULL);
+ atp8xx_fixup(pdev);
+
return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
}
@@ -419,11 +426,32 @@ static const struct pci_device_id artop_
{ } /* terminate list */
};
+#ifdef CONFIG_PM
+static int atp8xx_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp8xx_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_driver artop_pci_driver = {
.name = DRV_NAME,
.id_table = artop_pci_tbl,
.probe = artop_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = atp8xx_reinit_one,
+#endif
};
static int __init artop_init(void)
@@ -439,9 +467,8 @@ static void __exit artop_exit(void)
module_init(artop_init);
module_exit(artop_exit);
-MODULE_AUTHOR("Alan Cox");
+MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, artop_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists