| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1318826212.12989.2.camel@phoenix>
Date: Mon, 17 Oct 2011 12:36:52 +0800
From: Axel Lin <axel.lin@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Dimitris Papastamos <dp@...nsource.wolfsonmicro.com>,
Liam Girdwood <lrg@...com>, alsa-devel@...a-project.org
Subject: [PATCH 2/2] ASoC: wm9081: Use snd_soc_update_bits for
read-modify-write
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@...il.com>
---
sound/soc/codecs/wm9081.c | 81 +++++++++++++++++++--------------------------
1 files changed, 34 insertions(+), 47 deletions(-)
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 66092ef..f4fc03b 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -766,84 +766,72 @@ static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
static int wm9081_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg;
-
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
/* VMID=2*40k */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x2;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_SEL_MASK, 0x2);
/* Normal bias current */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA, 0);
break;
case SND_SOC_BIAS_STANDBY:
/* Initial cold start */
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
/* Disable LINEOUT discharge */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg &= ~WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH, 0);
/* Select startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA);
/* VMID 2*4k; Soft VMID ramp enable */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg |= WM9081_VMID_RAMP | 0x6;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
-
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | 0x6,
+ WM9081_VMID_RAMP | 0x6);
mdelay(100);
/* Normal bias enable & soft start off */
- reg |= WM9081_BIAS_ENA;
- reg &= ~WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_BIAS_ENA,
+ WM9081_BIAS_ENA);
/* Standard bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, 0);
}
/* VMID 2*240k */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x04;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_VMID_SEL_MASK, 0x04);
/* Standby bias current on */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA,
+ WM9081_STBY_BIAS_ENA);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, WM9081_BIAS_SRC);
/* Disable VMID and biases with soft ramping */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
- reg |= WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK |
+ WM9081_BIAS_ENA, WM9081_VMID_RAMP);
/* Actively discharge LINEOUT */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg |= WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH,
+ WM9081_LINEOUT_DISCH);
break;
}
@@ -1242,11 +1230,10 @@ static int wm9081_probe(struct snd_soc_codec *codec)
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Enable zero cross by default */
- reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
- snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
- reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
- snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
- reg | WM9081_SPKPGAZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT,
+ WM9081_LINEOUTZC, WM9081_LINEOUTZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+ WM9081_SPKPGAZC, WM9081_SPKPGAZC);
snd_soc_add_controls(codec, wm9081_snd_controls,
ARRAY_SIZE(wm9081_snd_controls));
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists