| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1318926486-10330-5-git-send-email-ricardo.ribalda@gmail.com>
Date: Tue, 18 Oct 2011 10:28:05 +0200
From: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To: dmitry.torokhov@...il.com, sameo@...ux.intel.com,
peter.ujfalusi@...com, aghayal@...eaurora.org, david@...deman.nu,
Shubhrajyoti@...com, saaguirre@...com, jic23@....ac.uk,
hemanthv@...com, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
Subject: [PATCH 4/5] input/cma3000_d0x: Add CMA3000 spi support
Add support for SPI communication.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
---
drivers/input/misc/Kconfig | 14 +++-
drivers/input/misc/Makefile | 1 +
drivers/input/misc/cma3000_d0x_spi.c | 178 ++++++++++++++++++++++++++++++++++
3 files changed, 191 insertions(+), 2 deletions(-)
create mode 100644 drivers/input/misc/cma3000_d0x_spi.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index c9104bb..b9f2e93 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -496,8 +496,8 @@ config INPUT_CMA3000
Say Y here if you want to use VTI CMA3000_D0x Accelerometer
driver
- This driver currently only supports I2C interface to the
- controller. Also select the I2C method.
+ This driver supports I2C and SPI interface to the
+ controller. Also select the I2C method and/or the SPI method.
If unsure, say N
@@ -514,6 +514,16 @@ config INPUT_CMA3000_I2C
To compile this driver as a module, choose M here: the
module will be called cma3000_d0x_i2c.
+config INPUT_CMA3000_SPI
+ tristate "Support SPI bus connection"
+ depends on INPUT_CMA3000 && SPI
+ help
+ Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+ through SPI interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cma3000_d0x_spi.
+
config INPUT_XEN_KBDDEV_FRONTEND
tristate "Xen virtual keyboard and mouse support"
depends on XEN_FBDEV_FRONTEND
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 299ad5e..7305f6f 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o
obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
+obj-$(CONFIG_INPUT_CMA3000_SPI) += cma3000_d0x_spi.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
diff --git a/drivers/input/misc/cma3000_d0x_spi.c b/drivers/input/misc/cma3000_d0x_spi.c
new file mode 100644
index 0000000..49ad373
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x_spi.c
@@ -0,0 +1,178 @@
+/*
+ * Implements SPI interface for VTI CMA300_D0x Accelerometer driver
+ *
+ * Copyright (C) 2011 Qtechnology
+ * Author: Ricardo Ribalda <ricardo.ribalda@...il.com.com>
+ * Based on:
+ * Hemanth V <hemanthv@...com>
+ * Michael Hennerich <hennerich@...ckfin.uclinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/input/cma3000.h>
+#include "cma3000_d0x.h"
+
+enum { DO_READ = 0, DO_WRITE };
+
+static int cma3000_spi_cmd(struct spi_device *spi, u8 reg, u8 * val, int cmd,
+ char *msg)
+{
+ int ret;
+ unsigned char tx_buf[2];
+ unsigned char rx_buf[2];
+ struct spi_transfer t = {
+ .rx_buf = rx_buf,
+ .tx_buf = tx_buf,
+ .len = 2,
+ };
+ struct spi_message m;
+
+ if (cmd == DO_WRITE) {
+ tx_buf[0] = (reg << 2) | 2;
+ tx_buf[1] = *val;
+ } else {
+ tx_buf[0] = reg << 2;
+ tx_buf[1] = 0;
+ }
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(spi, &m);
+ if (ret < 0) {
+ dev_err(&spi->dev, "%s failed (%s, %d)\n", __func__, msg, ret);
+ return ret;
+ }
+ if (cmd == DO_READ)
+ *val = rx_buf[1];
+
+ if (rx_buf[0] & 0xc1)
+ dev_err(&spi->dev,
+ "%s Invalid Zero mask(0x%x)\n", __func__, rx_buf[0]);
+
+ if ((rx_buf[0] & 0x2) != 0x2)
+ dev_err(&spi->dev,
+ "%s Invalid One mask (0x%x)\n", __func__, rx_buf[0]);
+
+ return 0;
+}
+
+static int cma3000_spi_set(struct device *dev, u8 reg, u8 val, char *msg)
+{
+
+ struct spi_device *spi = to_spi_device(dev);
+
+ return cma3000_spi_cmd(spi, reg, &val, DO_WRITE, msg);
+}
+
+static int cma3000_spi_read(struct device *dev, u8 reg, char *msg)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ int ret;
+ u8 val;
+
+ ret = cma3000_spi_cmd(spi, reg, &val, DO_READ, msg);
+ if (ret)
+ return ret;
+ return val;
+}
+
+static const struct cma3000_bus_ops cma3000_spi_bops = {
+ .bustype = BUS_SPI,
+#define CMA3000_BUSSPI (1 << 4)
+ .ctrl_mod = CMA3000_BUSSPI,
+ .read = cma3000_spi_read,
+ .write = cma3000_spi_set,
+};
+
+static int __devinit cma3000_spi_probe(struct spi_device *spi)
+{
+ struct cma3000_accl_data *data;
+
+ data = cma3000_init(&spi->dev, spi->irq, &cma3000_spi_bops);
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ spi_set_drvdata(spi, data);
+
+ return 0;
+}
+
+static int __devexit cma3000_spi_remove(struct spi_device *spi)
+{
+ struct cma3000_accl_data *data = dev_get_drvdata(&spi->dev);
+
+ cma3000_exit(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int cma3000_spi_suspend(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct cma3000_accl_data *data = dev_get_drvdata(&spi->dev);
+
+ cma3000_suspend(data);
+
+ return 0;
+}
+
+static int cma3000_spi_resume(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct cma3000_accl_data *data = dev_get_drvdata(&spi->dev);
+
+ cma3000_resume(data);
+
+ return 0;
+}
+
+static const struct dev_pm_ops cma3000_spi_pm_ops = {
+ .suspend = cma3000_spi_suspend,
+ .resume = cma3000_spi_resume,
+};
+#endif
+
+static SIMPLE_DEV_PM_OPS(cma3000_spi_pm, cma3000_spi_suspend,
+ cma3000_spi_resume);
+
+static struct spi_driver cma3000_driver = {
+ .driver = {
+ .name = "cma3000_d01",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ .pm = &cma3000_spi_pm,
+ },
+ .probe = cma3000_spi_probe,
+ .remove = __devexit_p(cma3000_spi_remove),
+};
+
+static int __init cma3000_spi_init(void)
+{
+ return spi_register_driver(&cma3000_driver);
+}
+
+static void __exit cma3000_spi_exit(void)
+{
+ spi_unregister_driver(&cma3000_driver);
+}
+
+module_init(cma3000_spi_init);
+module_exit(cma3000_spi_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer SPI Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@...il.com>");
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists