linux-kernel - Re: Possible bug in via-velocity on 3.0+

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4E9EA2EC.2090900@n00bsys0p.co.uk>
Date:	Wed, 19 Oct 2011 11:14:04 +0100
From:	n00b <n00b@...bsys0p.co.uk>
To:	Bjorn Helgaas <bhelgaas@...gle.com>
CC:	linux-kernel@...r.kernel.org
Subject: Re: Possible bug in via-velocity on 3.0+

On 18/10/11 17:15, Bjorn Helgaas wrote:
> On Tue, Oct 18, 2011 at 10:01 AM, n00bsys0p<n00b@...bsys0p.co.uk>  wrote:
>> Hi,
>>
>> I've been trying to get a custom 3.0 kernel to boot via PXE on a VIA EPIA
>> EN15000G, and have run into a problem where once the thin client starts to
>> load the kernel, the entire screen turns into a mosaic of random colours and
>> characters.
>>
>> I've tested this serving a 2.6.35.8 kernel (configured identically to the
>> 3.0) to the thin client where the master and client are both fitted with
>> EPIA EN1500G, and it works perfectly. Also, I tried swapping the master's
>> motherboard to a Gigabyte GA-D525TUD (Realtek LAN chip), and it succeeded in
>> serving the 3.0 kernel to an EN15000G without a fault.
>>
>> In all test cases, the master was using a 3.0 kernel.
>>
>> Through this testing, I surmise that it is something to do with the LAN
>> driver which is used, as this is the only thing I can see to have changed
>> between the two running systems. Could it be accidentally overwriting the
>> video RAM or something along those lines?
>>
>> Here's a link to a photo of what the screen looks like when it goes wrong:
>> https://lh3.googleusercontent.com/-sXFP41oaF9U/TpyMFg89CqI/AAAAAAAAA-I/PBrltIm0cB4/s720/PXEFail.jpg
> Let me see if I understand this correctly:
>
>    - The problem is on the EN15000G client.
>    - It occurs when the client boots 3.0 from a EN1500G server, but not
> when booting the same 3.0 kernel image from a GA-D525TUD server.
>    - It doesn't occur when booting 2.6.35.8 from a EN1500G server.
>    - The client boots successfully and is usable, i.e., the only
> problem is the temporary garbage on the screen during boot.
>
> It would be useful to see the complete dmesg log from 2.6.35.8 on the
> client.  If 3.0 actually does boot on the client, a dmesg log from 3.0
> would also be useful.  There might be a clue if we can compare them.
>
> Bjorn
In answer:
  - Yes, the problem is a client machine with an EN15000G board
  - Correct, the 3.0 kernel image booted the client using a GA-D525TUD 
server, but not when using an EN15000G
  - Correct again, the 2.6.35.8 image booted correctly from an EN15000G 
server
  - Not correct. The problem is permanent when it occurs. The client 
machine has been left for hours, and all that is visible is the garbage 
on screen.

I'm not sure if it was a one-off, but I can't appear to get it to serve 
the 3.0 kernel from the Gigabyte motherboard now. Exactly the same thing 
is happening as with the EN15000G (garbage mosaic).

I've attached the dmesg log from the client for the 2.6.35.8 kernel. If 
I manage to get the 3.0 kernel to boot again, I'll send over the dmesg 
log for that.

Alex

View attachment "dmesg.client.2.6.35.8" of type "text/plain" (23829 bytes)