| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1319091550-2558-9-git-send-email-ravishankar.km@greenturtles.in>
Date: Thu, 20 Oct 2011 11:48:55 +0530
From: Ravishankar Karkala Mallikarjunayya
<ravishankar.km@...enturtles.in>
To: gregkh@...e.de, wfp5p@...ginia.edu
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Ravishankar Karkala Mallikarjunayya
<ravishankar.km@...enturtles.in>
Subject: [PATCH 9/24] Staging: comedi: fix warning issue in dt3000.c
Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt.
Converted printks to pr_<level> and dev_printk.
Removed unneccessary printks.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@...enturtles.in>
---
drivers/staging/comedi/drivers/dt3000.c | 51 +++++++++++++++----------------
1 files changed, 25 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index 6170f7b..1d2c1a1 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -57,6 +57,9 @@ AO commands are not supported.
you the docs without one, also.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DEBUG 1
#include <linux/interrupt.h>
@@ -161,7 +164,7 @@ static const struct dt3k_boardtype dt3k_boardtypes[] = {
},
};
-#define n_dt3k_boards sizeof(dt3k_boardtypes)/sizeof(struct dt3k_boardtype)
+#define n_dt3k_boards (sizeof(dt3k_boardtypes)/sizeof(struct dt3k_boardtype))
#define this_board ((const struct dt3k_boardtype *)dev->board_ptr)
static DEFINE_PCI_DEVICE_TABLE(dt3k_pci_table) = {
@@ -352,7 +355,7 @@ static int dt3k_send_cmd(struct comedi_device *dev, unsigned int cmd)
if ((status & DT3000_COMPLETION_MASK) == DT3000_NOERROR)
return 0;
- printk("dt3k_send_cmd() timeout/error status=0x%04x\n", status);
+ pr_err("%s: timeout/error status=0x%04x\n", __func__, status);
return -ETIME;
}
@@ -383,7 +386,7 @@ static void dt3k_writesingle(struct comedi_device *dev, unsigned int subsys,
dt3k_send_cmd(dev, CMD_WRITESINGLE);
}
-static int debug_n_ints = 0;
+static int debug_n_ints;
/* FIXME! Assumes shared interrupt is for this card. */
/* What's this debug_n_ints stuff? Obviously needs some work... */
@@ -420,7 +423,6 @@ static irqreturn_t dt3k_interrupt(int irq, void *d)
return IRQ_HANDLED;
}
-#ifdef DEBUG
static char *intr_flags[] = {
"AdFull", "AdSwError", "AdHwError", "DaEmpty",
"DaSwError", "DaHwError", "CtDone", "CmDone",
@@ -429,14 +431,12 @@ static char *intr_flags[] = {
static void debug_intr_flags(unsigned int flags)
{
int i;
- printk("dt3k: intr_flags:");
+ pr_debug("intr_flags:\n");
for (i = 0; i < 8; i++) {
if (flags & (1 << i))
- printk(" %s", intr_flags[i]);
+ pr_debug("%s\n", intr_flags[i]);
}
- printk("\n");
}
-#endif
static void dt3k_ai_empty_fifo(struct comedi_device *dev,
struct comedi_subdevice *s)
@@ -452,7 +452,7 @@ static void dt3k_ai_empty_fifo(struct comedi_device *dev,
if (count < 0)
count += AI_FIFO_DEPTH;
- printk("reading %d samples\n", count);
+ pr_debug("reading %d samples\n", count);
rear = devpriv->ai_rear;
@@ -504,7 +504,9 @@ static int dt3k_ai_cmdtest(struct comedi_device *dev,
if (err)
return 1;
- /* step 2: make sure trigger sources are unique and mutually compatible */
+ /*
+ * step 2: make sure trigger sources are unique and mutually compatible
+ */
if (err)
return 2;
@@ -640,7 +642,7 @@ static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
int ret;
unsigned int mode;
- printk("dt3k_ai_cmd:\n");
+ dev_dbg(dev->hw_dev, "dt3k_ai_cmd:\n");
for (i = 0; i < cmd->chanlist_len; i++) {
chan = CR_CHAN(cmd->chanlist[i]);
range = CR_RANGE(cmd->chanlist[i]);
@@ -651,15 +653,15 @@ static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
aref = CR_AREF(cmd->chanlist[0]);
writew(cmd->scan_end_arg, devpriv->io_addr + DPR_Params(0));
- printk("param[0]=0x%04x\n", cmd->scan_end_arg);
+ dev_dbg(dev->hw_dev, "param[0]=0x%04x\n", cmd->scan_end_arg);
if (cmd->convert_src == TRIG_TIMER) {
divider = dt3k_ns_to_timer(50, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
writew((divider >> 16), devpriv->io_addr + DPR_Params(1));
- printk("param[1]=0x%04x\n", divider >> 16);
+ dev_dbg(dev->hw_dev, "param[1]=0x%04x\n", divider >> 16);
writew((divider & 0xffff), devpriv->io_addr + DPR_Params(2));
- printk("param[2]=0x%04x\n", divider & 0xffff);
+ dev_dbg(dev->hw_dev, "param[2]=0x%04x\n", divider & 0xffff);
} else {
/* not supported */
}
@@ -668,21 +670,21 @@ static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
tscandiv = dt3k_ns_to_timer(100, &cmd->scan_begin_arg,
cmd->flags & TRIG_ROUND_MASK);
writew((tscandiv >> 16), devpriv->io_addr + DPR_Params(3));
- printk("param[3]=0x%04x\n", tscandiv >> 16);
+ dev_dbg(dev->hw_dev, "param[3]=0x%04x\n", tscandiv >> 16);
writew((tscandiv & 0xffff), devpriv->io_addr + DPR_Params(4));
- printk("param[4]=0x%04x\n", tscandiv & 0xffff);
+ dev_dbg(dev->hw_dev, "param[4]=0x%04x\n", tscandiv & 0xffff);
} else {
/* not supported */
}
mode = DT3000_AD_RETRIG_INTERNAL | 0 | 0;
writew(mode, devpriv->io_addr + DPR_Params(5));
- printk("param[5]=0x%04x\n", mode);
+ dev_dbg(dev->hw_dev, "param[5]=0x%04x\n", mode);
writew(aref == AREF_DIFF, devpriv->io_addr + DPR_Params(6));
- printk("param[6]=0x%04x\n", aref == AREF_DIFF);
+ dev_dbg(dev->hw_dev, "param[6]=0x%04x\n", aref == AREF_DIFF);
writew(AI_FIFO_DEPTH / 2, devpriv->io_addr + DPR_Params(7));
- printk("param[7]=0x%04x\n", AI_FIFO_DEPTH / 2);
+ dev_dbg(dev->hw_dev, "param[7]=0x%04x\n", AI_FIFO_DEPTH / 2);
writew(SUBS_AI, devpriv->io_addr + DPR_SubSys);
ret = dt3k_send_cmd(dev, CMD_CONFIG);
@@ -848,7 +850,6 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
int bus, slot;
int ret = 0;
- printk("dt3000:");
bus = it->options[0];
slot = it->options[1];
@@ -860,7 +861,7 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (ret < 0)
return ret;
if (ret == 0) {
- printk(" no DT board found\n");
+ pr_err("no DT board found\n");
return -ENODEV;
}
@@ -868,7 +869,7 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (request_irq(devpriv->pci_dev->irq, dt3k_interrupt, IRQF_SHARED,
"dt3000", dev)) {
- printk(" unable to allocate IRQ %u\n", devpriv->pci_dev->irq);
+ pr_err("unable to allocate IRQ %u\n", devpriv->pci_dev->irq);
return -EINVAL;
}
dev->irq = devpriv->pci_dev->irq;
@@ -998,10 +999,8 @@ static int setup_pci(struct comedi_device *dev)
devpriv->io_addr = ioremap(devpriv->phys_addr, DT3000_SIZE);
if (!devpriv->io_addr)
return -ENOMEM;
-#if DEBUG
- printk("0x%08llx mapped to %p, ",
- (unsigned long long)devpriv->phys_addr, devpriv->io_addr);
-#endif
+ pr_debug("0x%08llx mapped to %p,\n",
+ (unsigned long long)devpriv->phys_addr, devpriv->io_addr);
return 0;
}
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists