| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1319272916-5541-1-git-send-email-kth3321@gmail.com>
Date: Sat, 22 Oct 2011 17:41:56 +0900
From: Taehun Kim <kth3321@...il.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
romieu@...zoreil.com, suhwan@...net.co.kr, bongbong@...net.co.kr
Subject: [PATCH net-next] w5300: add WIZnet W5300 Ethernet driver
hello, guys.
I have rewritten W5300 driver by applying the Francois Romieu's feedback
(http://marc.info/?l=linux-netdev&m=131714561419786&w=2).
This driver has been tested in the ARM board.
Please review this driver and apply it if do not have any problems.
Thank you.
T.K.
Signed-off-by: Taehun Kim <kth3321@...il.com>
---
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/wiznet/Kconfig | 32 ++
drivers/net/ethernet/wiznet/Makefile | 5 +
drivers/net/ethernet/wiznet/w5300.c | 706 ++++++++++++++++++++++++++++++++++
drivers/net/ethernet/wiznet/w5300.h | 121 ++++++
6 files changed, 866 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/ethernet/wiznet/Kconfig
create mode 100644 drivers/net/ethernet/wiznet/Makefile
create mode 100644 drivers/net/ethernet/wiznet/w5300.c
create mode 100644 drivers/net/ethernet/wiznet/w5300.h
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 6dff5a0..6325d85 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -173,5 +173,6 @@ source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
source "drivers/net/ethernet/xilinx/Kconfig"
source "drivers/net/ethernet/xircom/Kconfig"
+source "drivers/net/ethernet/wiznet/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index c53ad3a..7bd5211 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -72,3 +72,4 @@ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
+obj-$(CONFIG_NET_VENDOR_WIZNET) += wiznet/
diff --git a/drivers/net/ethernet/wiznet/Kconfig b/drivers/net/ethernet/wiznet/Kconfig
new file mode 100644
index 0000000..b5925bd
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/Kconfig
@@ -0,0 +1,32 @@
+#
+# WIZnet device configuration
+#
+
+config NET_VENDOR_WIZNET
+ bool "WIZnet devices"
+ default y
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about WIZnet devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_WIZNET
+
+config W5300
+ tristate "WIZnet W5300 Ethernet support"
+ depends on ARM
+ ---help---
+ This driver supports the Ethernet in the WIZnet W5300 chips.
+ W5300 supports hardwired TCP/IP stack. But this driver is limited to
+ the Ethernet function. To use hardwired TCP/IP stack, need to modify
+ the TCP/IP stack in linux kerenl.
+
+ To compile this driver as a module, choose M here: the module
+ will be called w5300.
+
+endif # NET_VENDOR_WIZNET
diff --git a/drivers/net/ethernet/wiznet/Makefile b/drivers/net/ethernet/wiznet/Makefile
new file mode 100644
index 0000000..53120bc
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the WIZnet device drivers.
+#
+
+obj-$(CONFIG_W5300) += w5300.o
diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c
new file mode 100644
index 0000000..14bbfee
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/w5300.c
@@ -0,0 +1,706 @@
+/* w5300.c: A Linux Ethernet driver for the WIZnet W5300 chip. */
+/*
+ Copyright (C) 2011 Taehun Kim <kth3321@...il.com>
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/errno.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include "w5300.h"
+
+#define DEV_NAME "w5300"
+#define DRV_VERSION "1.0"
+#define DRV_RELDATE "Oct 22, 2011"
+
+#define W5300_DEF_MSG_ENABLE \
+ (NETIF_MSG_DRV | \
+ NETIF_MSG_TIMER | \
+ NETIF_MSG_IFUP | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_INTR | \
+ NETIF_MSG_TX_DONE)
+
+static const char driver_info[] =
+ KERN_INFO DEV_NAME ": Ethernet driver v" DRV_VERSION "("
+ DRV_RELDATE ")\n";
+
+MODULE_AUTHOR("Taehun Kim <kth3321@...il.com>");
+MODULE_DESCRIPTION("WIZnet W5300 Ethernet driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+/* Transmit timeout, default 5 seconds. */
+static int watchdog = 5000;
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
+
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "W5300: bitmapped message enable number");
+
+/*
+ * This is W5300 information structure.
+ * Additional information is included in struct net_device.
+ */
+struct wiz_private {
+ void __iomem *base;
+ struct net_device *dev;
+ u8 rxbuf_conf[MAX_SOCK_NUM];
+ u8 txbuf_conf[MAX_SOCK_NUM];
+ struct net_device_stats stats;
+ struct napi_struct napi;
+ spinlock_t lock;
+ u32 msg_enable;
+};
+
+/* Default MAC address. */
+static __initdata u8 w5300_defmac[6] = {0x00, 0x08, 0xDC, 0xA0, 0x00, 0x01};
+
+/* Default RX/TX buffer size(KByte). */
+static u8 w5300_rxbuf_conf[MAX_SOCK_NUM] __initdata = {
+ 64, 0, 0, 0, 0, 0, 0, 0
+};
+
+static u8 w5300_txbuf_conf[MAX_SOCK_NUM] __initdata = {
+ 64, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* Notifying packet size in the RX FIFO */
+static int w5300_get_rxsize(struct wiz_private *wp, int s)
+{
+ u32 val;
+
+ val = w5300_read(wp, Sn_RX_RSR(s));
+ val = (val << 16) + w5300_read(wp, Sn_RX_RSR(s) + 2);
+ return val;
+}
+
+/* Packet Receive Function. It reads received packet from the Rx FIFO. */
+static void w5300_recv_data(struct wiz_private *wp, int s, u8 *buf,
+ ssize_t len)
+{
+ int i;
+ u16 recv_data;
+
+ /* read from RX FIFO */
+ for (i = 0; i < len; i += 2) {
+ recv_data = w5300_read(wp, Sn_RX_FIFO(s));
+ buf[i] = (u8) ((recv_data & 0xFF00) >> 8);
+ buf[i + 1] = (u8) (recv_data & 0x00FF);
+ }
+}
+
+/* Setting MAC address of W5300 */
+static void w5300_set_macaddr(struct wiz_private *wp, u8 * addr)
+{
+ int i;
+
+ for (i = 0; i < 3; ++i) {
+ u16 mac_addr = (addr[2*i] << 8) | addr[2*i+1];
+
+ w5300_write(wp, SHAR + 2*i, mac_addr);
+ }
+}
+
+/* Opening channels of W5300 */
+static int w5300_channel_open(struct wiz_private *wp, u32 type)
+{
+ int timeout = 1000;
+
+ /* Which type will be used for open? */
+ switch (type) {
+ case Sn_MR_MACRAW:
+ case Sn_MR_MACRAW_MF:
+ w5300_write(wp, Sn_MR(0), type);
+ break;
+ default:
+ netif_err(wp, ifup, wp->dev,
+ "Unknown socket type (%d)\n", type);
+
+ return -EFAULT;
+ }
+
+ w5300_write(wp, Sn_CR(0), Sn_CR_OPEN);
+
+ while (timeout--) {
+ if (!w5300_read(wp, Sn_CR(0)))
+ return 0;
+ udelay(1);
+ }
+
+ return -EBUSY;
+}
+
+/* Activating the interrupt of related channel */
+static void w5300_interrupt_enable(struct wiz_private *wp)
+{
+ u16 mask;
+
+ mask = w5300_read(wp, IMR) | 0x1;
+ w5300_write(wp, IMR, mask);
+}
+
+/* De-activating the interrupt of related channel */
+static void w5300_interrupt_disable(struct wiz_private *wp)
+{
+ u16 mask;
+
+ mask = w5300_read(wp, IMR) & ~0x1;
+ w5300_write(wp, IMR, mask);
+}
+
+/* W5300 initialization function */
+static int w5300_reset(struct net_device *dev)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+ u32 txbuf_total = 0, i;
+ u16 mem_cfg = 0;
+ u16 rx_size, tx_size;
+
+ netif_dbg(wp, drv, wp->dev, "w5300 chip reset\n");
+
+ /* W5300 is initialized by sending RESET command. */
+ w5300_write(wp, MR, MR_RST);
+ mdelay(5);
+
+ /* Mode Register Setting
+ * Ping uses S/W stack of the Linux kernel. Set the Ping Block.*/
+ w5300_write(wp, MR, MR_WDF(1) | MR_PB);
+
+ /* Setting MAC address */
+ w5300_set_macaddr(wp, dev->dev_addr);
+
+ /* Setting the size of Rx/Tx FIFO */
+ for (i = 0; i < MAX_SOCK_NUM; ++i) {
+ if (wp->rxbuf_conf[i] > 64) {
+ netif_err(wp, drv, wp->dev,
+ "Illegal Channel(%d) RX memory size.\n", i);
+
+ return -EINVAL;
+ }
+ if (wp->txbuf_conf[i] > 64) {
+ netif_err(wp, drv, wp->dev,
+ "Illegal Channel(%d) TX memory size.\n", i);
+
+ return -EINVAL;
+ }
+ txbuf_total += wp->txbuf_conf[i];
+ }
+
+ if (txbuf_total % 8) {
+ netif_err(wp, drv, wp->dev,
+ "Illegal memory size register setting.\n");
+
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 4; ++i) {
+ rx_size = (wp->rxbuf_conf[2*i] << 8) | wp->rxbuf_conf[2*i+1];
+ tx_size = (wp->txbuf_conf[2*i] << 8) | wp->txbuf_conf[2*i+1];
+
+ w5300_write(wp, RMSR + 2*i, rx_size);
+ w5300_write(wp, TMSR + 2*i, tx_size);
+ }
+
+ /* Setting FIFO Memory Type (TX&RX) */
+ for (i = 0; i < txbuf_total / 8; ++i) {
+ mem_cfg <<= 1;
+ mem_cfg |= 1;
+ }
+ w5300_write(wp, MTYPER, mem_cfg);
+
+ /* Masking all interrupts */
+ w5300_write(wp, IMR, 0x0000);
+
+ return 0;
+}
+
+/* Interrupt Handler(ISR) */
+static irqreturn_t wiz_interrupt(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct wiz_private *wp = netdev_priv(dev);
+ int timeout = 100;
+ u16 isr, ssr;
+ int s;
+
+ isr = w5300_read(wp, IR);
+
+ /* Completing all interrupts at a time. */
+ while (isr && timeout--) {
+ w5300_write(wp, IR, isr);
+
+ /* Finding the channel to create the interrupt */
+ s = find_first_bit((ulong *)&isr, sizeof(u16));
+ ssr = w5300_read(wp, Sn_IR(s));
+ /* socket interrupt is cleared. */
+ w5300_write(wp, Sn_IR(s), ssr);
+
+ netif_dbg(wp, intr, wp->dev,
+ "ISR = %X, SSR = %X, s = %X\n",
+ isr, ssr, s);
+
+ if (likely(!s)) {
+ if (ssr & Sn_IR_RECV) {
+ /* Interrupt disable. */
+ w5300_interrupt_disable(wp);
+ /* Receiving by polling method */
+ napi_schedule(&wp->napi);
+ }
+ }
+
+ /* Is there any interrupt to be processed? */
+ isr = w5300_read(wp, IR);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int wiz_open(struct net_device *dev)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+ int ret;
+
+ napi_enable(&wp->napi);
+
+ ret = request_irq(dev->irq, wiz_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (ret < 0) {
+ netif_err(wp, ifup, wp->dev, "request_irq() error!\n");
+ return ret;
+ }
+
+ w5300_interrupt_enable(wp);
+
+ /* Sending OPEN command to use channel 0 as MACRAW mode. */
+ ret = w5300_channel_open(wp, Sn_MR_MACRAW_MF);
+ if (ret < 0) {
+ netif_err(wp, ifup, wp->dev, "w5300 channel open fail!\n");
+ return ret;
+ }
+
+ netif_carrier_on(dev);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int wiz_close(struct net_device *dev)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+ int timeout = 1000;
+
+ napi_disable(&wp->napi);
+ netif_carrier_off(dev);
+
+ /* Interrupt masking of all channels */
+ w5300_write(wp, IMR, 0x0000);
+ w5300_write(wp, Sn_CR(0), Sn_CR_CLOSE);
+
+ while (timeout--) {
+ if (!w5300_read(wp, Sn_CR(0)))
+ break;
+ udelay(1);
+ }
+
+ free_irq(dev->irq, dev);
+
+ return 0;
+}
+
+static int w5300_send_data(struct wiz_private *wp, u8 *buf, ssize_t len)
+{
+ int i;
+ u16 send_data;
+ int timeout = 1000;
+
+ /* Writing packets in to Tx FIFO */
+ for (i = 0; i < len; i += 2) {
+ send_data = (buf[i] << 8) | buf[i+1];
+ w5300_write(wp, Sn_TX_FIFO(0), send_data);
+ }
+
+ w5300_write(wp, Sn_TX_WRSR(0), (u16)(len >> 16));
+ w5300_write(wp, Sn_TX_WRSR(0) + 2, (u16)len);
+ w5300_write(wp, Sn_CR(0), Sn_CR_SEND);
+
+ while (timeout--) {
+ if (!w5300_read(wp, Sn_CR(0)))
+ return len;
+ udelay(1);
+ }
+
+ return -EBUSY;
+}
+
+/* Function to transmit data at the MACRAW mode */
+static int wiz_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+ int ret;
+
+ ret = w5300_send_data(wp, skb->data, skb->len);
+
+ /* Statistical Process */
+ if (ret < 0) {
+ wp->stats.tx_dropped++;
+ } else {
+ wp->stats.tx_bytes += skb->len;
+ wp->stats.tx_packets++;
+ dev->trans_start = jiffies;
+ netif_dbg(wp, tx_done, wp->dev,
+ "tx done, packet size = %d\n", skb->len);
+ }
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
+static struct net_device_stats *wiz_get_stats(struct net_device *dev)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+
+ return &wp->stats;
+}
+
+/* It is called when multi-cast list or flag is changed. */
+static void wiz_set_multicast(struct net_device *dev)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+ int ret;
+ u32 type = dev->flags & IFF_PROMISC ? Sn_MR_MACRAW : Sn_MR_MACRAW_MF;
+
+ ret = w5300_channel_open(wp, type);
+ if (ret < 0) {
+ netif_err(wp, ifup, wp->dev,
+ "w5300 channel open fail!\n");
+ }
+}
+
+static int wiz_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+ struct sockaddr *sock_addr = addr;
+
+ netif_dbg(wp, drv, wp->dev, "set mac address");
+
+ spin_lock(&wp->lock);
+ w5300_set_macaddr(wp, sock_addr->sa_data);
+ memcpy(dev->dev_addr, sock_addr->sa_data, dev->addr_len);
+ spin_unlock(&wp->lock);
+
+ return 0;
+}
+
+static void wiz_tx_timeout(struct net_device *dev)
+{
+ struct wiz_private *wp = netdev_priv(dev);
+ unsigned long flags;
+
+ netif_dbg(wp, timer, wp->dev, "Transmit timeout");
+
+ spin_lock_irqsave(&wp->lock, flags);
+
+ /* Initializing W5300 chip. */
+ if (w5300_reset(dev) < 0) {
+ netif_err(wp, timer, wp->dev, "w5300 reset fail!\n");
+ return;
+ }
+
+ /* Waking up network interface */
+ netif_wake_queue(dev);
+ spin_unlock_irqrestore(&wp->lock, flags);
+}
+
+/*
+ * Polling Function to process only receiving at the MACRAW mode.
+ * De-activating the interrupt when recv interrupt occurs,
+ * and processing the RECEIVE with this Function
+ * Activating the interrupt after completing RECEIVE process
+ * As recv interrupt often occurs at short intervals,
+ * there will system load in case that interrupt handler process the RECEIVE.
+ */
+static int wiz_rx_poll(struct napi_struct *napi, int budget)
+{
+ struct wiz_private *wp = container_of(napi, struct wiz_private, napi);
+ struct net_device *dev = wp->dev;
+ int npackets = 0;
+
+ /* Processing the RECEIVE during Rx FIFO is containing any packet */
+ while (w5300_get_rxsize(wp, 0) > 0) {
+ struct sk_buff *skb;
+ u16 rxbuf_len, pktlen;
+ u32 crc;
+
+ /* The first 2byte is the information about packet lenth. */
+ w5300_recv_data(wp, 0, (u8 *)&pktlen, 2);
+ pktlen = be16_to_cpu(pktlen);
+
+ netif_dbg(wp, rx_err, wp->dev, "pktlen = %d\n", pktlen);
+
+ /*
+ * Allotting the socket buffer in which packet will be contained
+ * Ethernet packet is of 14byte.
+ * In order to make it multiplied by 2, the buffer allocation
+ * should be 2bytes bigger than the packet.
+ */
+ skb = netdev_alloc_skb_ip_align(dev, pktlen);
+ if (!skb) {
+ u8 temp[pktlen + 4];
+ wp->stats.rx_dropped++;
+ w5300_recv_data(wp, 0, temp, pktlen + 4);
+ continue;
+ }
+
+ /* Initializing the socket buffer */
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+ skb_put(skb, pktlen);
+
+ /* Reading packets from W5300 Rx FIFO into socket buffer. */
+ w5300_recv_data(wp, 0, (u8 *)skb->data, pktlen);
+
+ /* Reading and discarding 4byte CRC. */
+ w5300_recv_data(wp, 0, (u8 *)&crc, 4);
+ crc = be32_to_cpu(crc);
+
+ /* The packet type is Ethernet. */
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Passing packets to uppder stack (kernel). */
+ netif_receive_skb(skb);
+
+ /* Processing statistical information */
+ wp->stats.rx_packets++;
+ wp->stats.rx_bytes += pktlen;
+ wp->dev->last_rx = jiffies;
+ rxbuf_len -= pktlen;
+ npackets++;
+
+ if (npackets >= budget)
+ break;
+ }
+
+ /* If packet number is smaller than budget when getting out of loopback,
+ * the RECEIVE process is completed. */
+ if (npackets < budget) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&wp->lock, flags);
+ w5300_interrupt_enable(wp);
+ __napi_complete(napi);
+ spin_unlock_irqrestore(&wp->lock, flags);
+ }
+ return npackets;
+}
+
+static const struct net_device_ops wiz_netdev_ops = {
+ .ndo_open = wiz_open,
+ .ndo_stop = wiz_close,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = wiz_set_mac_address,
+ .ndo_set_rx_mode = wiz_set_multicast,
+ .ndo_get_stats = wiz_get_stats,
+ .ndo_start_xmit = wiz_start_xmit,
+ .ndo_tx_timeout = wiz_tx_timeout,
+};
+
+/* Initialize W5300 driver. */
+static int __devinit w5300_drv_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct wiz_private *wp;
+ struct resource *res;
+ void __iomem *addr;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Request the chip register regions. */
+ if (!request_mem_region(res->start, resource_size(res), DEV_NAME)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* Allocatting struct net_device structure which is managing W5300 */
+ dev = alloc_etherdev(sizeof(struct wiz_private));
+ if (!dev) {
+ ret = -ENOMEM;
+ goto release_region;
+ }
+
+ dev->dma = (unsigned char)-1;
+ dev->irq = platform_get_irq(pdev, 0);
+ wp = netdev_priv(dev);
+ wp->dev = dev;
+ wp->msg_enable = (debug < 0 ? W5300_DEF_MSG_ENABLE : debug);
+ addr = ioremap(res->start, SZ_1M);
+ if (!addr) {
+ ret = -ENOMEM;
+ goto release_both;
+ }
+
+ platform_set_drvdata(pdev, dev);
+ wp->base = addr;
+
+ spin_lock_init(&wp->lock);
+
+ /* Initialization of Rx/Tx FIFO size */
+ memcpy(wp->rxbuf_conf, w5300_rxbuf_conf, MAX_SOCK_NUM);
+ memcpy(wp->txbuf_conf, w5300_txbuf_conf, MAX_SOCK_NUM);
+
+ dev->base_addr = res->start;
+
+ memcpy(dev->dev_addr, w5300_defmac, dev->addr_len);
+ dev->netdev_ops = &wiz_netdev_ops;
+
+ /* Setting napi. Enabling to process max 16 packets at a time. */
+ netif_napi_add(dev, &wp->napi, wiz_rx_poll, 16);
+
+ dev->watchdog_timeo = msecs_to_jiffies(watchdog);
+
+ ret = w5300_reset(dev);
+ if (ret < 0)
+ goto release_both;
+
+ ret = register_netdev(dev);
+ if (ret != 0) {
+ platform_set_drvdata(pdev, NULL);
+ iounmap(addr);
+release_both:
+ free_netdev(dev);
+release_region:
+ release_mem_region(res->start, resource_size(res));
+ }
+out:
+ return ret;
+}
+
+static int __devexit w5300_drv_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct wiz_private *wp = netdev_priv(dev);
+ struct resource *res;
+
+ platform_set_drvdata(pdev, NULL);
+ unregister_netdev(dev);
+
+ iounmap(wp->base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res != NULL)
+ release_mem_region(res->start, resource_size(res));
+
+ free_netdev(dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int w5300_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ if (dev) {
+ struct wiz_private *wp = netdev_priv(dev);
+
+ if (netif_running(dev)) {
+ int timeout = 1000;
+
+ netif_carrier_off(dev);
+ netif_device_detach(dev);
+ w5300_write(wp, IMR, 0x0000);
+ w5300_write(wp, Sn_CR(0), Sn_CR_CLOSE);
+
+ while (timeout--) {
+ if (!w5300_read(wp, Sn_CR(0)))
+ return 0;
+ udelay(1);
+ }
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static int w5300_drv_resume(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ int ret = 0;
+
+ if (dev) {
+ struct wiz_private *wp = netdev_priv(dev);
+
+ if (netif_running(dev)) {
+ ret = w5300_reset(dev);
+ if (ret < 0)
+ goto out;
+
+ w5300_interrupt_enable(wp);
+
+ ret = w5300_channel_open(wp, Sn_MR_MACRAW_MF);
+ if (ret < 0)
+ goto out;
+
+ netif_carrier_on(dev);
+ netif_device_attach(dev);
+ }
+ }
+
+out:
+ return ret;
+}
+#endif /* CONFIG_PM */
+
+static struct platform_driver w5300_driver = {
+ .driver = {
+ .name = DEV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = w5300_drv_probe,
+ .remove = __devexit_p(w5300_drv_remove),
+#ifdef CONFIG_PM
+ .suspend = w5300_drv_suspend,
+ .resume = w5300_drv_resume,
+#endif
+};
+
+static int __init wiz_module_init(void)
+{
+ return platform_driver_register(&w5300_driver);
+}
+
+static void __exit wiz_module_exit(void)
+{
+ platform_driver_unregister(&w5300_driver);
+}
+
+module_init(wiz_module_init);
+module_exit(wiz_module_exit);
diff --git a/drivers/net/ethernet/wiznet/w5300.h b/drivers/net/ethernet/wiznet/w5300.h
new file mode 100644
index 0000000..bb6e181
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/w5300.h
@@ -0,1 +1,121 @@
+#ifndef _W5300_H_
+#define _W5300_H_
+
+/* Maximum socket number. W5300 supports max 8 channels. */
+#define MAX_SOCK_NUM 8
+
+/* socket register */
+#define CH_BASE (0x200)
+
+/* size of each channel register map */
+#define CH_SIZE 0x40
+
+#define MR (0) /**< Mode register */
+#define IR (0x02) /**< Interrupt register */
+#define IMR (0x04) /**< Interrupt mask register */
+#define SHAR (0x08) /**< Source MAC register address */
+#define TMSR (0x20) /**< Transmit memory size register */
+#define RMSR (0x28) /**< Receive memory size register */
+
+/*
+ * Memory Type Register
+ * '1' - TX memory
+ * '0' - RX memory
+ */
+#define MTYPER (0x30)
+
+/* Chip ID register(=0x5300) */
+#define IDR (0xFE)
+#define IDR1 (IDR + 1)
+
+/* socket Mode register */
+#define Sn_MR(ch) (CH_BASE + ch * CH_SIZE + 0x00)
+#define Sn_MR1(ch) (Sn_MR(ch)+1)
+
+/* socket command register */
+#define Sn_CR(ch) (CH_BASE + ch * CH_SIZE + 0x02)
+#define Sn_CR1(ch) (Sn_CR(ch)+1);
+
+/* socket interrupt register */
+#define Sn_IR(ch) (CH_BASE + ch * CH_SIZE + 0x06)
+
+/* Transmit Size Register (Byte count) */
+#define Sn_TX_WRSR(ch) (CH_BASE + ch * CH_SIZE + 0x20)
+
+/* Transmit free memory size register (Byte count) */
+#define Sn_TX_FSR(ch) (CH_BASE + ch * CH_SIZE + 0x24)
+
+/* Received data size register (Byte count) */
+#define Sn_RX_RSR(ch) (CH_BASE + ch * CH_SIZE + 0x28)
+
+/* FIFO register for Transmit */
+#define Sn_TX_FIFO(ch) (CH_BASE + ch * CH_SIZE + 0x2E)
+
+/* FIFO register for Receive */
+#define Sn_RX_FIFO(ch) (CH_BASE + ch * CH_SIZE + 0x30)
+
+/* MODE register values */
+#define MR_DBW (1 << 15) /**< Data bus width bit of MR. */
+#define MR_MPF (1 << 14) /**< Mac layer pause frame bit of MR. */
+#define MR_WDF(x) ((x & 0x07) << 11) /**< Write data fetch time bit of MR. */
+#define MR_RDH (1 << 10) /**< Read data hold time bit of MR. */
+#define MR_FS (1 << 8) /**< FIFO swap bit of MR. */
+#define MR_RST (1 << 7) /**< S/W reset bit of MR. */
+#define MR_MT (1 << 5) /**< Memory test bit of MR. */
+#define MR_PB (1 << 4) /**< Ping block bit of MR. */
+#define MR_PPPoE (1 << 3) /**< PPPoE bit of MR. */
+#define MR_DBS (1 << 2) /**< Data bus swap of MR. */
+#define MR_IND (1 << 0) /**< Indirect mode bit of MR. */
+
+/* IR register values */
+#define IR_IPCF (1 << 7) /**< IP conflict bit of IR. */
+#define IR_DPUR (1 << 6) /**< Destination port unreachable bit of IR. */
+#define IR_PPPT (1 << 5) /**< PPPoE terminate bit of IR. */
+#define IR_FMTU (1 << 4) /**< Fragment MTU bit of IR. */
+#define IR_SnINT(n) (0x01 << n) /**< SOCKETn interrupt occurrence bit of IR. */
+
+/* Sn_MR values */
+#define Sn_MR_ALIGN (1 << 8) /**< Alignment bit of Sn_MR. */
+#define Sn_MR_MULTI (1 << 7) /**< Multicasting bit of Sn_MR. */
+#define Sn_MR_MF (1 << 6) /**< MAC filter bit of Sn_MR. */
+#define Sn_MR_IGMPv (1 << 5) /**< IGMP version bit of Sn_MR. */
+#define Sn_MR_ND (1 << 5) /**< No delayed ack bit of Sn_MR. */
+#define Sn_MR_CLOSE 0x00 /**< Protocol bits of Sn_MR. */
+#define Sn_MR_TCP 0x01 /**< Protocol bits of Sn_MR. */
+#define Sn_MR_UDP 0x02 /**< Protocol bits of Sn_MR. */
+#define Sn_MR_IPRAW 0x03 /**< Protocol bits of Sn_MR. */
+#define Sn_MR_MACRAW 0x04 /**< Protocol bits of Sn_MR. */
+#define Sn_MR_MACRAW_MF 0x44 /**< Protocol bits of Sn_MR */
+#define Sn_MR_PPPoE 0x05 /**< Protocol bits of Sn_MR. */
+
+/* Sn_CR values */
+#define Sn_CR_OPEN 0x01 /**< OPEN command value of Sn_CR. */
+#define Sn_CR_LISTEN 0x02 /**< LISTEN command value of Sn_CR. */
+#define Sn_CR_CONNECT 0x04 /**< CONNECT command value of Sn_CR. */
+#define Sn_CR_DISCON 0x08 /**< DISCONNECT command value of Sn_CR. */
+#define Sn_CR_CLOSE 0x10 /**< CLOSE command value of Sn_CR. */
+#define Sn_CR_SEND 0x20 /**< SEND command value of Sn_CR. */
+#define Sn_CR_SEND_MAC 0x21 /**< SEND_MAC command value of Sn_CR. */
+#define Sn_CR_SEND_KEEP 0x22 /**< SEND_KEEP command value of Sn_CR */
+#define Sn_CR_RECV 0x40 /**< RECV command value of Sn_CR */
+#define Sn_CR_PCON 0x23 /**< PCON command value of Sn_CR */
+#define Sn_CR_PDISCON 0x24 /**< PDISCON command value of Sn_CR */
+#define Sn_CR_PCR 0x25 /**< PCR command value of Sn_CR */
+#define Sn_CR_PCN 0x26 /**< PCN command value of Sn_CR */
+#define Sn_CR_PCJ 0x27 /**< PCJ command value of Sn_CR */
+
+/* Sn_IR values */
+#define Sn_IR_PRECV 0x80 /**< PPP receive bit of Sn_IR */
+#define Sn_IR_PFAIL 0x40 /**< PPP fail bit of Sn_IR */
+#define Sn_IR_PNEXT 0x20 /**< PPP next phase bit of Sn_IR */
+#define Sn_IR_SENDOK 0x10 /**< Send OK bit of Sn_IR */
+#define Sn_IR_TIMEOUT 0x08 /**< Timout bit of Sn_IR */
+#define Sn_IR_RECV 0x04 /**< Receive bit of Sn_IR */
+#define Sn_IR_DISCON 0x02 /**< Disconnect bit of Sn_IR */
+#define Sn_IR_CON 0x01 /**< Connect bit of Sn_IR */
+
+/* W5300 Register READ/WRITE funtions(Just 16 bit interface). */
+#define w5300_write(wp, addr, val) writew(val, (wp->base + addr))
+#define w5300_read(wp, addr) readw((wp->base + addr))
+
+#endif /* _W5300_H_ */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists