| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1319404686-10800-4-git-send-email-geert@linux-m68k.org>
Date: Sun, 23 Oct 2011 23:18:05 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: linux-m68k@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: [PATCH 4/5] m68k/irq: Remove obsolete IRQ_FLG_* users
The m68k core irq code stopped honoring these flags during the irq
restructuring in 2006.
Signed-off-by: Geert Uytterhoeven <geert@...ux-m68k.org>
---
This is a split-up of "m68k/irq: Remove obsolete IRQ_FLG_* definitions and
users", to reduce conflicts and remove dependencies.
diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index 0daa7fc..e5f3033 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -4,35 +4,6 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- * this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- * be careful that dev_id for this sources is unique since this the
- * only possibility to distinguish between different handlers for
- * free_irq. irq lists also have different irq flags:
- * - IRQ_FLG_FAST: handler is inserted at top of list (after other
- * fast handlers)
- * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- * they're executed irq level is set to the previous
- * one, but handlers don't need to be reentrant, if
- * reentrance occurred, slow handlers will be just
- * called again.
- * The whole interrupt handling for CIAs is moved to cia.c
- * /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- * interrupts, normal and fast handlers, fast handlers being
- * marked with IRQF_DISABLED and runs with all other interrupts
- * disabled. Normal interrupts disable their own source but
- * run with all other interrupt sources enabled.
- * PORTS and EXTER interrupts are always shared even if the
- * drivers do not explicitly mark this when calling
- * request_irq which they really should do.
- * This is similar to the way interrupts are handled on all
- * other architectures and makes a ton of sense besides
- * having the advantage of making it easier to share
- * drivers.
- * /Jes
*/
#include <linux/init.h>
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index f6312c7..c87fe69 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -70,7 +70,7 @@ void __init hp300_sched_init(irq_handler_t vector)
asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
- if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector))
+ if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector))
pr_err("Couldn't register timer interrupt\n");
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index 15dbbe2..f6a4698 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -4,25 +4,6 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
- *
- * 07/03/96: Timer initialization, and thus mach_sched_init(),
- * removed from request_irq() and moved to init_time().
- * We should therefore consider renaming our add_isr() and
- * remove_isr() to request_irq() and free_irq()
- * respectively, so they are compliant with the other
- * architectures. /Jes
- * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls.
- * Removed irq list support, if any machine needs an irq server
- * it must implement this itself (as it's already done), instead
- * only default handler are used with mach_default_handler.
- * request_irq got some flags different from other architectures:
- * - IRQ_FLG_REPLACE : Replace an existing handler (the default one
- * can be replaced without this flag)
- * - IRQ_FLG_LOCK : handler can't be replaced
- * There are other machine depending flags, see there
- * If you want to replace a default handler you should know what
- * you're doing, since it might handle different other irq sources
- * which must be served /Roman Zippel
*/
#include <linux/module.h>
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index 1ad4e9d..a5462cc 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -305,15 +305,13 @@ void __init iop_register_interrupts(void)
{
if (iop_ism_present) {
if (oss_present) {
- if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
- IRQ_FLG_LOCK, "ISM IOP",
- (void *) IOP_NUM_ISM))
+ if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+ "ISM IOP", (void *)IOP_NUM_ISM))
pr_err("Couldn't register ISM IOP interrupt\n");
oss_irq_enable(IRQ_MAC_ADB);
} else {
- if (request_irq(IRQ_VIA2_0, iop_ism_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP",
- (void *) IOP_NUM_ISM))
+ if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
+ (void *)IOP_NUM_ISM))
pr_err("Couldn't register ISM IOP interrupt\n");
}
if (!iop_alive(iop_base[IOP_NUM_ISM])) {
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index ad51241..1eb60f0 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -65,17 +65,14 @@ void __init oss_init(void)
void __init oss_register_interrupts(void)
{
- if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
- "scsi", (void *) oss))
+ if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss))
pr_err("Couldn't register %s interrupt\n", "scsi");
- if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
- "nubus", (void *) oss))
+ if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus",
+ (void *)oss))
pr_err("Couldn't register %s interrupt\n", "nubus");
- if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
- "sound", (void *) oss))
+ if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss))
pr_err("Couldn't register %s interrupt\n", "sound");
- if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
- "via1", (void *) via1))
+ if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1))
pr_err("Couldn't register %s interrupt\n", "via1");
}
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 0678570..af9ed33 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -281,7 +281,7 @@ void __init via_init_clock(irq_handler_t func)
via1[vT1CL] = MAC_CLOCK_LOW;
via1[vT1CH] = MAC_CLOCK_HIGH;
- if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func))
+ if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
pr_err("Couldn't register %s interrupt\n", "timer");
}
@@ -292,25 +292,19 @@ void __init via_init_clock(irq_handler_t func)
void __init via_register_interrupts(void)
{
if (via_alt_mapping) {
- if (request_irq(IRQ_AUTO_1, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "software",
- (void *) via1))
+ if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software",
+ (void *)via1))
pr_err("Couldn't register %s interrupt\n", "software");
- if (request_irq(IRQ_AUTO_6, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
- (void *) via1))
+ if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1))
pr_err("Couldn't register %s interrupt\n", "via1");
} else {
- if (request_irq(IRQ_AUTO_1, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
- (void *) via1))
+ if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1))
pr_err("Couldn't register %s interrupt\n", "via1");
}
- if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
- "via2", (void *) via2))
+ if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2))
pr_err("Couldn't register %s interrupt\n", "via2");
- if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
+ if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus",
+ (void *)via2))
pr_err("Couldn't register %s interrupt\n", "nubus");
}
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 6cb9c3a..01f2adf 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -114,8 +114,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
void mvme147_sched_init (irq_handler_t timer_routine)
{
tick_handler = timer_routine;
- if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE,
- "timer 1", NULL))
+ if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
pr_err("Couldn't register timer interrupt\n");
/* Init the clock with a value */
diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index 817f37a..c9570fc 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -159,7 +159,7 @@ int macii_init(void)
err = macii_init_via();
if (err) goto out;
- err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB",
+ err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB",
macii_interrupt);
if (err) goto out;
diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c
index 9ab5b0c..34d02a9 100644
--- a/drivers/macintosh/via-maciisi.c
+++ b/drivers/macintosh/via-maciisi.c
@@ -122,8 +122,8 @@ maciisi_init(void)
return err;
}
- if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST,
- "ADB", maciisi_interrupt)) {
+ if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB",
+ maciisi_interrupt)) {
printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
return -EAGAIN;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists