| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1319361774-3148-9-git-send-email-mark.einon@gmail.com>
Date: Sun, 23 Oct 2011 10:22:50 +0100
From: Mark Einon <mark.einon@...il.com>
To: gregkh@...e.de
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Mark Einon <mark.einon@...il.com>
Subject: [PATCH 08/12] staging: et131x: Remove yet more forward declarations
Moved functions in et131x.c file to remove the forward declarations of:
et1310_setup_device_for_multicast
et1310_setup_device_for_unicast
et131x_up
et131x_down
et131x_enable_txrx
et131x_disable_txrx
Signed-off-by: Mark Einon <mark.einon@...il.com>
---
drivers/staging/et131x/et131x.c | 434 +++++++++++++++++++--------------------
1 files changed, 214 insertions(+), 220 deletions(-)
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 44fff21..208c69f 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -576,12 +576,6 @@ struct et131x_adapter {
struct net_device_stats net_stats;
};
-void et1310_setup_device_for_multicast(struct et131x_adapter *adapter);
-void et1310_setup_device_for_unicast(struct et131x_adapter *adapter);
-void et131x_up(struct net_device *netdev);
-void et131x_down(struct net_device *netdev);
-void et131x_enable_txrx(struct net_device *netdev);
-void et131x_disable_txrx(struct net_device *netdev);
int et1310_in_phy_coma(struct et131x_adapter *adapter);
void et1310_phy_access_mii_bit(struct et131x_adapter *adapter,
u16 action,
@@ -1025,6 +1019,95 @@ void et1310_config_mac_regs2(struct et131x_adapter *adapter)
}
}
+void et1310_setup_device_for_multicast(struct et131x_adapter *adapter)
+{
+ struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
+ uint32_t nIndex;
+ uint32_t result;
+ uint32_t hash1 = 0;
+ uint32_t hash2 = 0;
+ uint32_t hash3 = 0;
+ uint32_t hash4 = 0;
+ u32 pm_csr;
+
+ /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision
+ * the multi-cast LIST. If it is NOT specified, (and "ALL" is not
+ * specified) then we should pass NO multi-cast addresses to the
+ * driver.
+ */
+ if (adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) {
+ /* Loop through our multicast array and set up the device */
+ for (nIndex = 0; nIndex < adapter->multicast_addr_count;
+ nIndex++) {
+ result = ether_crc(6, adapter->multicast_list[nIndex]);
+
+ result = (result & 0x3F800000) >> 23;
+
+ if (result < 32) {
+ hash1 |= (1 << result);
+ } else if ((31 < result) && (result < 64)) {
+ result -= 32;
+ hash2 |= (1 << result);
+ } else if ((63 < result) && (result < 96)) {
+ result -= 64;
+ hash3 |= (1 << result);
+ } else {
+ result -= 96;
+ hash4 |= (1 << result);
+ }
+ }
+ }
+
+ /* Write out the new hash to the device */
+ pm_csr = readl(&adapter->regs->global.pm_csr);
+ if (!et1310_in_phy_coma(adapter)) {
+ writel(hash1, &rxmac->multi_hash1);
+ writel(hash2, &rxmac->multi_hash2);
+ writel(hash3, &rxmac->multi_hash3);
+ writel(hash4, &rxmac->multi_hash4);
+ }
+}
+
+void et1310_setup_device_for_unicast(struct et131x_adapter *adapter)
+{
+ struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
+ u32 uni_pf1;
+ u32 uni_pf2;
+ u32 uni_pf3;
+ u32 pm_csr;
+
+ /* Set up unicast packet filter reg 3 to be the first two octets of
+ * the MAC address for both address
+ *
+ * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the
+ * MAC address for second address
+ *
+ * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the
+ * MAC address for first address
+ */
+ uni_pf3 = (adapter->addr[0] << ET_UNI_PF_ADDR2_1_SHIFT) |
+ (adapter->addr[1] << ET_UNI_PF_ADDR2_2_SHIFT) |
+ (adapter->addr[0] << ET_UNI_PF_ADDR1_1_SHIFT) |
+ adapter->addr[1];
+
+ uni_pf2 = (adapter->addr[2] << ET_UNI_PF_ADDR2_3_SHIFT) |
+ (adapter->addr[3] << ET_UNI_PF_ADDR2_4_SHIFT) |
+ (adapter->addr[4] << ET_UNI_PF_ADDR2_5_SHIFT) |
+ adapter->addr[5];
+
+ uni_pf1 = (adapter->addr[2] << ET_UNI_PF_ADDR1_3_SHIFT) |
+ (adapter->addr[3] << ET_UNI_PF_ADDR1_4_SHIFT) |
+ (adapter->addr[4] << ET_UNI_PF_ADDR1_5_SHIFT) |
+ adapter->addr[5];
+
+ pm_csr = readl(&adapter->regs->global.pm_csr);
+ if (!et1310_in_phy_coma(adapter)) {
+ writel(uni_pf1, &rxmac->uni_pf_addr1);
+ writel(uni_pf2, &rxmac->uni_pf_addr2);
+ writel(uni_pf3, &rxmac->uni_pf_addr3);
+ }
+}
+
void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
{
struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
@@ -1358,95 +1441,6 @@ void et1310_handle_macstat_interrupt(struct et131x_adapter *adapter)
adapter->stats.tx_collisions += COUNTER_WRAP_12_BIT;
}
-void et1310_setup_device_for_multicast(struct et131x_adapter *adapter)
-{
- struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
- uint32_t nIndex;
- uint32_t result;
- uint32_t hash1 = 0;
- uint32_t hash2 = 0;
- uint32_t hash3 = 0;
- uint32_t hash4 = 0;
- u32 pm_csr;
-
- /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision
- * the multi-cast LIST. If it is NOT specified, (and "ALL" is not
- * specified) then we should pass NO multi-cast addresses to the
- * driver.
- */
- if (adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) {
- /* Loop through our multicast array and set up the device */
- for (nIndex = 0; nIndex < adapter->multicast_addr_count;
- nIndex++) {
- result = ether_crc(6, adapter->multicast_list[nIndex]);
-
- result = (result & 0x3F800000) >> 23;
-
- if (result < 32) {
- hash1 |= (1 << result);
- } else if ((31 < result) && (result < 64)) {
- result -= 32;
- hash2 |= (1 << result);
- } else if ((63 < result) && (result < 96)) {
- result -= 64;
- hash3 |= (1 << result);
- } else {
- result -= 96;
- hash4 |= (1 << result);
- }
- }
- }
-
- /* Write out the new hash to the device */
- pm_csr = readl(&adapter->regs->global.pm_csr);
- if (!et1310_in_phy_coma(adapter)) {
- writel(hash1, &rxmac->multi_hash1);
- writel(hash2, &rxmac->multi_hash2);
- writel(hash3, &rxmac->multi_hash3);
- writel(hash4, &rxmac->multi_hash4);
- }
-}
-
-void et1310_setup_device_for_unicast(struct et131x_adapter *adapter)
-{
- struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
- u32 uni_pf1;
- u32 uni_pf2;
- u32 uni_pf3;
- u32 pm_csr;
-
- /* Set up unicast packet filter reg 3 to be the first two octets of
- * the MAC address for both address
- *
- * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the
- * MAC address for second address
- *
- * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the
- * MAC address for first address
- */
- uni_pf3 = (adapter->addr[0] << ET_UNI_PF_ADDR2_1_SHIFT) |
- (adapter->addr[1] << ET_UNI_PF_ADDR2_2_SHIFT) |
- (adapter->addr[0] << ET_UNI_PF_ADDR1_1_SHIFT) |
- adapter->addr[1];
-
- uni_pf2 = (adapter->addr[2] << ET_UNI_PF_ADDR2_3_SHIFT) |
- (adapter->addr[3] << ET_UNI_PF_ADDR2_4_SHIFT) |
- (adapter->addr[4] << ET_UNI_PF_ADDR2_5_SHIFT) |
- adapter->addr[5];
-
- uni_pf1 = (adapter->addr[2] << ET_UNI_PF_ADDR1_3_SHIFT) |
- (adapter->addr[3] << ET_UNI_PF_ADDR1_4_SHIFT) |
- (adapter->addr[4] << ET_UNI_PF_ADDR1_5_SHIFT) |
- adapter->addr[5];
-
- pm_csr = readl(&adapter->regs->global.pm_csr);
- if (!et1310_in_phy_coma(adapter)) {
- writel(uni_pf1, &rxmac->uni_pf_addr1);
- writel(uni_pf2, &rxmac->uni_pf_addr2);
- writel(uni_pf3, &rxmac->uni_pf_addr3);
- }
-}
-
/* PHY functions */
int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg)
@@ -1982,6 +1976,104 @@ void et131x_soft_reset(struct et131x_adapter *adapter)
}
/**
+ * et131x_enable_interrupts - enable interrupt
+ * @adapter: et131x device
+ *
+ * Enable the appropriate interrupts on the ET131x according to our
+ * configuration
+ */
+void et131x_enable_interrupts(struct et131x_adapter *adapter)
+{
+ u32 mask;
+
+ /* Enable all global interrupts */
+ if (adapter->flowcontrol == FLOW_TXONLY ||
+ adapter->flowcontrol == FLOW_BOTH)
+ mask = INT_MASK_ENABLE;
+ else
+ mask = INT_MASK_ENABLE_NO_FLOW;
+
+ writel(mask, &adapter->regs->global.int_mask);
+}
+
+/**
+ * et131x_disable_interrupts - interrupt disable
+ * @adapter: et131x device
+ *
+ * Block all interrupts from the et131x device at the device itself
+ */
+void et131x_disable_interrupts(struct et131x_adapter *adapter)
+{
+ /* Disable all global interrupts */
+ writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask);
+}
+
+/**
+ * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310
+ * @adapter: pointer to our adapter structure
+ */
+void et131x_tx_dma_disable(struct et131x_adapter *adapter)
+{
+ /* Setup the tramsmit dma configuration register */
+ writel(ET_TXDMA_CSR_HALT|ET_TXDMA_SNGL_EPKT,
+ &adapter->regs->txdma.csr);
+}
+
+/**
+ * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310.
+ * @adapter: pointer to our adapter structure
+ *
+ * Mainly used after a return to the D0 (full-power) state from a lower state.
+ */
+void et131x_tx_dma_enable(struct et131x_adapter *adapter)
+{
+ /* Setup the transmit dma configuration register for normal
+ * operation
+ */
+ writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT),
+ &adapter->regs->txdma.csr);
+}
+
+/**
+ * et131x_enable_txrx - Enable tx/rx queues
+ * @netdev: device to be enabled
+ */
+void et131x_enable_txrx(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ /* Enable the Tx and Rx DMA engines (if not already enabled) */
+ et131x_rx_dma_enable(adapter);
+ et131x_tx_dma_enable(adapter);
+
+ /* Enable device interrupts */
+ if (adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE)
+ et131x_enable_interrupts(adapter);
+
+ /* We're ready to move some data, so start the queue */
+ netif_start_queue(netdev);
+}
+
+/**
+ * et131x_disable_txrx - Disable tx/rx queues
+ * @netdev: device to be disabled
+ */
+void et131x_disable_txrx(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ /* First thing is to stop the queue */
+ netif_stop_queue(netdev);
+
+ /* Stop the Tx and Rx DMA engines */
+ et131x_rx_dma_disable(adapter);
+ et131x_tx_dma_disable(adapter);
+
+ /* Disable device interrupts */
+ et131x_disable_interrupts(adapter);
+}
+
+/**
* et1310_enable_phy_coma - called when network cable is unplugged
* @adapter: pointer to our adapter structure
*
@@ -3164,32 +3256,6 @@ void et131x_tx_dma_memory_free(struct et131x_adapter *adapter)
}
/**
- * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310
- * @adapter: pointer to our adapter structure
- */
-void et131x_tx_dma_disable(struct et131x_adapter *adapter)
-{
- /* Setup the tramsmit dma configuration register */
- writel(ET_TXDMA_CSR_HALT|ET_TXDMA_SNGL_EPKT,
- &adapter->regs->txdma.csr);
-}
-
-/**
- * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310.
- * @adapter: pointer to our adapter structure
- *
- * Mainly used after a return to the D0 (full-power) state from a lower state.
- */
-void et131x_tx_dma_enable(struct et131x_adapter *adapter)
-{
- /* Setup the transmit dma configuration register for normal
- * operation
- */
- writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT),
- &adapter->regs->txdma.csr);
-}
-
-/**
* et131x_init_send - Initialize send data structures
* @adapter: pointer to our private adapter structure
*/
@@ -4046,27 +4112,6 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
}
/**
- * et131x_enable_interrupts - enable interrupt
- * @adapter: et131x device
- *
- * Enable the appropriate interrupts on the ET131x according to our
- * configuration
- */
-void et131x_enable_interrupts(struct et131x_adapter *adapter)
-{
- u32 mask;
-
- /* Enable all global interrupts */
- if (adapter->flowcontrol == FLOW_TXONLY ||
- adapter->flowcontrol == FLOW_BOTH)
- mask = INT_MASK_ENABLE;
- else
- mask = INT_MASK_ENABLE_NO_FLOW;
-
- writel(mask, &adapter->regs->global.int_mask);
-}
-
-/**
* et131x_error_timer_handler
* @data: timer-specific variable; here a pointer to our adapter structure
*
@@ -4350,18 +4395,6 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
}
/**
- * et131x_disable_interrupts - interrupt disable
- * @adapter: et131x device
- *
- * Block all interrupts from the et131x device at the device itself
- */
-void et131x_disable_interrupts(struct et131x_adapter *adapter)
-{
- /* Disable all global interrupts */
- writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask);
-}
-
-/**
* et131x_pci_remove
* @pdev: a pointer to the device's pci_dev structure
*
@@ -4388,6 +4421,33 @@ static void __devexit et131x_pci_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
+/**
+ * et131x_up - Bring up a device for use.
+ * @netdev: device to be opened
+ */
+void et131x_up(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ et131x_enable_txrx(netdev);
+ phy_start(adapter->phydev);
+}
+
+/**
+ * et131x_down - Bring down the device
+ * @netdev: device to be broght down
+ */
+void et131x_down(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ /* Save the timestamp for the TX watchdog, prevent a timeout */
+ netdev->trans_start = jiffies;
+
+ phy_stop(adapter->phydev);
+ et131x_disable_txrx(netdev);
+}
+
#ifdef CONFIG_PM_SLEEP
static int et131x_suspend(struct device *dev)
{
@@ -4766,57 +4826,6 @@ static struct net_device_stats *et131x_stats(struct net_device *netdev)
}
/**
- * et131x_enable_txrx - Enable tx/rx queues
- * @netdev: device to be enabled
- */
-void et131x_enable_txrx(struct net_device *netdev)
-{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- /* Enable the Tx and Rx DMA engines (if not already enabled) */
- et131x_rx_dma_enable(adapter);
- et131x_tx_dma_enable(adapter);
-
- /* Enable device interrupts */
- if (adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE)
- et131x_enable_interrupts(adapter);
-
- /* We're ready to move some data, so start the queue */
- netif_start_queue(netdev);
-}
-
-/**
- * et131x_disable_txrx - Disable tx/rx queues
- * @netdev: device to be disabled
- */
-void et131x_disable_txrx(struct net_device *netdev)
-{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- /* First thing is to stop the queue */
- netif_stop_queue(netdev);
-
- /* Stop the Tx and Rx DMA engines */
- et131x_rx_dma_disable(adapter);
- et131x_tx_dma_disable(adapter);
-
- /* Disable device interrupts */
- et131x_disable_interrupts(adapter);
-}
-
-/**
- * et131x_up - Bring up a device for use.
- * @netdev: device to be opened
- */
-void et131x_up(struct net_device *netdev)
-{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- et131x_enable_txrx(netdev);
- phy_start(adapter->phydev);
-}
-
-/**
* et131x_open - Open the device for use.
* @netdev: device to be opened
*
@@ -4851,21 +4860,6 @@ int et131x_open(struct net_device *netdev)
}
/**
- * et131x_down - Bring down the device
- * @netdev: device to be broght down
- */
-void et131x_down(struct net_device *netdev)
-{
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- /* Save the timestamp for the TX watchdog, prevent a timeout */
- netdev->trans_start = jiffies;
-
- phy_stop(adapter->phydev);
- et131x_disable_txrx(netdev);
-}
-
-/**
* et131x_close - Close the device
* @netdev: device to be closed
*
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists