| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1319566096-3222-6-git-send-email-y>
Date: Tue, 25 Oct 2011 11:08:14 -0700
From: y@...nel.beaverton.ibm.com
To: lkml <linux-kernel@...r.kernel.org>
Cc: John Stultz <johnstul@...ibm.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Greg Ungerer <gerg@...inux.org>
Subject: [PATCH 6/8] clocksource: m86knommu: Convert to clocksource_register_hz/khz
From: John Stultz <johnstul@...ibm.com>
This converts the m86knommu clocksources to use clocksource_register_hz/khz
This is untested, so any assistance in testing would be appreciated!
CC: Geert Uytterhoeven <geert@...ux-m68k.org>
CC: Greg Ungerer <gerg@...inux.org>
Signed-off-by: John Stultz <johnstul@...ibm.com>
---
arch/m68k/platform/68328/timers.c | 4 +-
arch/m68k/platform/coldfire/dma_timer.c | 5 +-
arch/m68knommu/platform/coldfire/pit.c | 167 ++++++++++++++++++++++++++++
arch/m68knommu/platform/coldfire/timers.c | 172 +++++++++++++++++++++++++++++
4 files changed, 341 insertions(+), 7 deletions(-)
create mode 100644 arch/m68knommu/platform/coldfire/pit.c
create mode 100644 arch/m68knommu/platform/coldfire/timers.c
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index 309f725..f267886 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -93,7 +93,6 @@ static struct clocksource m68328_clk = {
.name = "timer",
.rating = 250,
.read = m68328_read_clk,
- .shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -115,8 +114,7 @@ void hw_timer_init(void)
/* Enable timer 1 */
TCTL |= TCTL_TEN;
- m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
- clocksource_register(&m68328_clk);
+ clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
}
/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c
index a5f5628..235ad57 100644
--- a/arch/m68k/platform/coldfire/dma_timer.c
+++ b/arch/m68k/platform/coldfire/dma_timer.c
@@ -44,7 +44,6 @@ static struct clocksource clocksource_cf_dt = {
.rating = 200,
.read = cf_dt_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -60,9 +59,7 @@ static int __init init_cf_dt_clocksource(void)
__raw_writeb(0x00, DTER0);
__raw_writel(0x00000000, DTRR0);
__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
- clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
- clocksource_cf_dt.shift);
- return clocksource_register(&clocksource_cf_dt);
+ return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
}
arch_initcall(init_cf_dt_clocksource);
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
new file mode 100644
index 0000000..ff5e34a
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -0,0 +1,167 @@
+/***************************************************************************/
+
+/*
+ * pit.c -- Freescale ColdFire PIT timer. Currently this type of
+ * hardware timer only exists in the Freescale ColdFire
+ * 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire
+ * family members will probably use it too.
+ *
+ * Copyright (C) 1999-2008, Greg Ungerer (gerg@...pgear.com)
+ * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ * By default use timer1 as the system clock timer.
+ */
+#define FREQ ((MCF_CLK / 2) / 64)
+#define TA(a) (MCF_IPSBAR + MCFPIT_BASE1 + (a))
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
+
+static u32 pit_cnt;
+
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+
+ __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+ __raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+ __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+ MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+ MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+
+ __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+
+ __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+ __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+ MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+ TA(MCFPIT_PCSR));
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ /* Nothing to do here */
+ break;
+ }
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ __raw_writew(delta, TA(MCFPIT_PMR));
+ return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+ .name = "pit",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = init_cf_pit_timer,
+ .set_next_event = cf_pit_next_event,
+ .shift = 32,
+ .irq = MCFINT_VECBASE + MCFINT_PIT1,
+};
+
+
+
+/***************************************************************************/
+
+static irqreturn_t pit_tick(int irq, void *dummy)
+{
+ struct clock_event_device *evt = &cf_pit_clockevent;
+ u16 pcsr;
+
+ /* Reset the ColdFire timer */
+ pcsr = __raw_readw(TA(MCFPIT_PCSR));
+ __raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
+
+ pit_cnt += PIT_CYCLES_PER_JIFFY;
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction pit_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = pit_tick,
+};
+
+/***************************************************************************/
+
+static cycle_t pit_read_clk(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 cycles;
+ u16 pcntr;
+
+ local_irq_save(flags);
+ pcntr = __raw_readw(TA(MCFPIT_PCNTR));
+ cycles = pit_cnt;
+ local_irq_restore(flags);
+
+ return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
+}
+
+/***************************************************************************/
+
+static struct clocksource pit_clk = {
+ .name = "pit",
+ .rating = 100,
+ .read = pit_read_clk,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+/***************************************************************************/
+
+void hw_timer_init(void)
+{
+ cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
+ cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+ cf_pit_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+ cf_pit_clockevent.min_delta_ns =
+ clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+ clockevents_register_device(&cf_pit_clockevent);
+
+ setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
+
+ clocksource_register_hz(&pit_clk, FREQ);
+}
+
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
new file mode 100644
index 0000000..6b8faec
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -0,0 +1,172 @@
+/***************************************************************************/
+
+/*
+ * timers.c -- generic ColdFire hardware timer support.
+ *
+ * Copyright (C) 1999-2008, Greg Ungerer <gerg@...pgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcftimer.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ * By default use timer1 as the system clock timer.
+ */
+#define FREQ (MCF_BUSCLK / 16)
+#define TA(a) (MCF_MBAR + MCFTIMER_BASE1 + (a))
+
+/*
+ * These provide the underlying interrupt vector support.
+ * Unfortunately it is a little different on each ColdFire.
+ */
+void coldfire_profile_init(void);
+
+#if defined(CONFIG_M532x)
+#define __raw_readtrr __raw_readl
+#define __raw_writetrr __raw_writel
+#else
+#define __raw_readtrr __raw_readw
+#define __raw_writetrr __raw_writew
+#endif
+
+static u32 mcftmr_cycles_per_jiffy;
+static u32 mcftmr_cnt;
+
+/***************************************************************************/
+
+static irqreturn_t mcftmr_tick(int irq, void *dummy)
+{
+ /* Reset the ColdFire timer */
+ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
+
+ mcftmr_cnt += mcftmr_cycles_per_jiffy;
+ return arch_timer_interrupt(irq, dummy);
+}
+
+/***************************************************************************/
+
+static struct irqaction mcftmr_timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = mcftmr_tick,
+};
+
+/***************************************************************************/
+
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 cycles;
+ u16 tcn;
+
+ local_irq_save(flags);
+ tcn = __raw_readw(TA(MCFTIMER_TCN));
+ cycles = mcftmr_cnt;
+ local_irq_restore(flags);
+
+ return cycles + tcn;
+}
+
+/***************************************************************************/
+
+static struct clocksource mcftmr_clk = {
+ .name = "tmr",
+ .rating = 250,
+ .read = mcftmr_read_clk,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/***************************************************************************/
+
+void hw_timer_init(void)
+{
+ __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
+ mcftmr_cycles_per_jiffy = FREQ / HZ;
+ /*
+ * The coldfire timer runs from 0 to TRR included, then 0
+ * again and so on. It counts thus actually TRR + 1 steps
+ * for 1 tick, not TRR. So if you want n cycles,
+ * initialize TRR with n - 1.
+ */
+ __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
+ __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+ MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
+
+ clocksource_register_hz(&mcftmr_clk, FREQ);
+
+ setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
+
+#ifdef CONFIG_HIGHPROFILE
+ coldfire_profile_init();
+#endif
+}
+
+/***************************************************************************/
+#ifdef CONFIG_HIGHPROFILE
+/***************************************************************************/
+
+/*
+ * By default use timer2 as the profiler clock timer.
+ */
+#define PA(a) (MCF_MBAR + MCFTIMER_BASE2 + (a))
+
+/*
+ * Choose a reasonably fast profile timer. Make it an odd value to
+ * try and get good coverage of kernel operations.
+ */
+#define PROFILEHZ 1013
+
+/*
+ * Use the other timer to provide high accuracy profiling info.
+ */
+irqreturn_t coldfire_profile_tick(int irq, void *dummy)
+{
+ /* Reset ColdFire timer2 */
+ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+ return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction coldfire_profile_irq = {
+ .name = "profile timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = coldfire_profile_tick,
+};
+
+void coldfire_profile_init(void)
+{
+ printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
+ PROFILEHZ);
+
+ /* Set up TIMER 2 as high speed profile clock */
+ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
+
+ __raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+ __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+ MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
+
+ setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
+}
+
+/***************************************************************************/
+#endif /* CONFIG_HIGHPROFILE */
+/***************************************************************************/
--
1.7.3.2.146.gca209
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists