| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4EA79629.3040403@snapgear.com>
Date: Wed, 26 Oct 2011 15:10:01 +1000
From: Greg Ungerer <gerg@...pgear.com>
To: john stultz <johnstul@...ibm.com>
CC: Geert Uytterhoeven <geert@...ux-m68k.org>,
lkml <linux-kernel@...r.kernel.org>,
Greg Ungerer <gerg@...inux.org>,
uClinux development list <uclinux-dev@...inux.org>
Subject: Re: [PATCH 6/8] clocksource: m86k: Convert to clocksource_register_hz/khz
Hi John,
On 26/10/11 04:46, john stultz wrote:
> Updated to merge the valid bits of the two m68k patches.
>
> This converts the m86k clocksources to use clocksource_register_hz/khz
>
> This is untested, so any assistance in testing would be appreciated!
This looks good. I test compiled across all targets these files affect.
And run tested on ColdFire/5208 (which uses pit.c).
> CC: Geert Uytterhoeven<geert@...ux-m68k.org>
> CC: Greg Ungerer<gerg@...inux.org>
> Signed-off-by: John Stultz<johnstul@...ibm.com>
Acked-by: Greg Ungerer <gerg@...inux.org>
Do you want me to push these via the m68knommu git tree?
Regards
Greg
> arch/m68k/platform/68328/timers.c | 4 +---
> arch/m68k/platform/coldfire/dma_timer.c | 5 +----
> arch/m68k/platform/coldfire/pit.c | 4 +---
> arch/m68k/platform/coldfire/sltimers.c | 4 +---
> arch/m68k/platform/coldfire/timers.c | 4 +---
> 5 files changed, 5 insertions(+), 16 deletions(-)
>
> diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
> index 309f725..f267886 100644
> --- a/arch/m68k/platform/68328/timers.c
> +++ b/arch/m68k/platform/68328/timers.c
> @@ -93,7 +93,6 @@ static struct clocksource m68328_clk = {
> .name = "timer",
> .rating = 250,
> .read = m68328_read_clk,
> - .shift = 20,
> .mask = CLOCKSOURCE_MASK(32),
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
> @@ -115,8 +114,7 @@ void hw_timer_init(void)
>
> /* Enable timer 1 */
> TCTL |= TCTL_TEN;
> - m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
> - clocksource_register(&m68328_clk);
> + clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
> }
>
> /***************************************************************************/
> diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c
> index a5f5628..235ad57 100644
> --- a/arch/m68k/platform/coldfire/dma_timer.c
> +++ b/arch/m68k/platform/coldfire/dma_timer.c
> @@ -44,7 +44,6 @@ static struct clocksource clocksource_cf_dt = {
> .rating = 200,
> .read = cf_dt_get_cycles,
> .mask = CLOCKSOURCE_MASK(32),
> - .shift = 20,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> @@ -60,9 +59,7 @@ static int __init init_cf_dt_clocksource(void)
> __raw_writeb(0x00, DTER0);
> __raw_writel(0x00000000, DTRR0);
> __raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
> - clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
> - clocksource_cf_dt.shift);
> - return clocksource_register(&clocksource_cf_dt);
> + return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
> }
>
> arch_initcall(init_cf_dt_clocksource);
> diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
> index c2b9809..02663d2 100644
> --- a/arch/m68k/platform/coldfire/pit.c
> +++ b/arch/m68k/platform/coldfire/pit.c
> @@ -144,7 +144,6 @@ static struct clocksource pit_clk = {
> .name = "pit",
> .rating = 100,
> .read = pit_read_clk,
> - .shift = 20,
> .mask = CLOCKSOURCE_MASK(32),
> };
>
> @@ -162,8 +161,7 @@ void hw_timer_init(void)
>
> setup_irq(MCFINT_VECBASE + MCFINT_PIT1,&pit_irq);
>
> - pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
> - clocksource_register(&pit_clk);
> + clocksource_register_hz(&pit_clk, FREQ);
> }
>
> /***************************************************************************/
> diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
> index 6a85daf..b7f822b 100644
> --- a/arch/m68k/platform/coldfire/sltimers.c
> +++ b/arch/m68k/platform/coldfire/sltimers.c
> @@ -114,7 +114,6 @@ static struct clocksource mcfslt_clk = {
> .name = "slt",
> .rating = 250,
> .read = mcfslt_read_clk,
> - .shift = 20,
> .mask = CLOCKSOURCE_MASK(32),
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
> @@ -136,8 +135,7 @@ void hw_timer_init(void)
>
> setup_irq(MCF_IRQ_TIMER,&mcfslt_timer_irq);
>
> - mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
> - clocksource_register(&mcfslt_clk);
> + clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
>
> #ifdef CONFIG_HIGHPROFILE
> mcfslt_profile_init();
> diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
> index 60242f6..0d90da3 100644
> --- a/arch/m68k/platform/coldfire/timers.c
> +++ b/arch/m68k/platform/coldfire/timers.c
> @@ -88,7 +88,6 @@ static struct clocksource mcftmr_clk = {
> .name = "tmr",
> .rating = 250,
> .read = mcftmr_read_clk,
> - .shift = 20,
> .mask = CLOCKSOURCE_MASK(32),
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
> @@ -109,8 +108,7 @@ void hw_timer_init(void)
> __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
> MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
>
> - mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
> - clocksource_register(&mcftmr_clk);
> + clocksource_register_hz(&mcftmr_clk, FREQ);
>
> setup_irq(MCF_IRQ_TIMER,&mcftmr_timer_irq);
>
--
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: gerg@...pgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists