Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.1.0.git (root@wensbook) (gcc version 4.6.1 (Debian 4.6.1-15) ) #8 SMP Wed Oct 26 00:14:17 BST 2011 Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0.git root=UUID=21d8c00d-634e-477c-b7bd-347f09002b93 ro quiet KERNEL supported cpus: Intel GenuineIntel BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007dd31000 (usable) BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS) BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data) BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS) BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data) BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS) BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data) BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS) BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data) BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS) BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data) BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved) BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data) BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7dd31 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFE00000 mask FFFE00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 07F000000 mask FFF000000 uncachable 3 base 07EF00000 mask FFFF00000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-000000007dd31000 0000000000 - 007dc00000 page 2M 007dc00000 - 007dd31000 page 4k kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000 RAMDISK: 37b74000 - 37db2000 ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013) ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F) ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109) ACPI: FACS 000000007eecc000 00040 ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109) ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109) ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109) ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007b400000-ffff88007cffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007dd31 On node 0 totalpages: 515264 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3922 pages, LIFO batch:0 DMA32 zone: 6991 pages used for memmap DMA32 zone: 504290 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff88007da00000 s74624 r8192 d23680 u1048576 pcpu-alloc: s74624 r8192 d23680 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508212 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0.git root=UUID=21d8c00d-634e-477c-b7bd-347f09002b93 ro quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2018944k/2061508k available (3950k kernel code, 452k absent, 42112k reserved, 2603k data, 392k init) Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2394.164 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.32 BogoMIPS (lpj=9576656) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20110623 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 9a000 NMI watchdog enabled, takes one hw-pmu counter. Brought up 2 CPUs Total of 2 processors activated (9576.22 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region at 7dd31000 (2101248 bytes) PM: Registering ACPI NVS region at 7dfe5000 (8192 bytes) PM: Registering ACPI NVS region at 7eec3000 (8192 bytes) PM: Registering ACPI NVS region at 7eec8000 (12288 bytes) PM: Registering ACPI NVS region at 7eecc000 (77824 bytes) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820 PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: EC description table is found, configuring boot EC [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101 pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff] pci 0000:02:00.0: [14e4:4328] type 0 class 0x000280 pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] pci 0000:03:00.0: [11ab:436a] type 0 class 0x000200 pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.5: PCI bridge to [bus 03-03] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff] pci 0000:04:03.0: [11c1:5811] type 0 class 0x000c00 pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff] pci 0000:04:03.0: supports D1 D2 pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007dd31000 - 000000007fffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0x80000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed1c000-0xfed1ffff] pnp 00:01: [mem 0xfed14000-0xfed17fff] pnp 00:01: [mem 0xfed18000-0xfed18fff] pnp 00:01: [mem 0xfed19000-0xfed19fff] pnp 00:01: [mem 0xf0000000-0xf3ffffff] pnp 00:01: [mem 0xfed20000-0xfed3ffff] pnp 00:01: [mem 0xfed45000-0xfed8ffff] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0300-0x031f] pnp 00:02: [irq 6] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active) pnp 00:03: [io 0x0000-0x001f] pnp 00:03: [io 0x0081-0x0091] pnp 00:03: [io 0x0093-0x009f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [mem 0xff000000-0xffffffff] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:05: [irq 0 disabled] pnp 00:05: [irq 8] pnp 00:05: [mem 0xfed00000-0xfed003ff] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:06: [io 0x00f0] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x002e-0x002f] pnp 00:07: [io 0x004e-0x004f] pnp 00:07: [io 0x0061] pnp 00:07: [io 0x0063] pnp 00:07: [io 0x0065] pnp 00:07: [io 0x0067] pnp 00:07: [io 0x0070] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0092] pnp 00:07: [io 0x00b2-0x00b3] pnp 00:07: [io 0x0680-0x069f] pnp 00:07: [io 0x0800-0x080f] pnp 00:07: [io 0x0810-0x0817] pnp 00:07: [io 0x0400-0x047f] pnp 00:07: [io 0x0500-0x053f] pnp 00:07: [io 0x1640-0x164f] system 00:07: [io 0x0680-0x069f] has been reserved system 00:07: [io 0x0800-0x080f] has been reserved system 00:07: [io 0x0810-0x0817] has been reserved system 00:07: [io 0x0400-0x047f] has been reserved system 00:07: [io 0x0500-0x053f] has been reserved system 00:07: [io 0x1640-0x164f] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [io 0x0070-0x0077] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.5: BAR 15: assigned [mem 0x90800000-0x908fffff pref] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90800000-0x90afffff pref] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90b00000-0x90cfffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff] pci 0000:00:1c.0: bridge window [mem 0x90b00000-0x90cfffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x90800000-0x9081ffff pref] pci 0000:00:1c.5: PCI bridge to [bus 03-03] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff] pci 0000:00:1c.5: bridge window [mem 0x90800000-0x90afffff pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff] pci 0000:00:1c.0: enabling device (0000 -> 0003) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff] pci_bus 0000:01: resource 2 [mem 0x90b00000-0x90cfffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff] pci_bus 0000:03: resource 2 [mem 0x90800000-0x90afffff pref] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS mismatch (256 != 64), using 64 bytes Unpacking initramfs... Freeing initrd memory: 2296k freed Machine check injector initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 3947 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt pci 0000:02:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt pci 0000:03:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 16384K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 43 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state render error detected, EIR: 0x00000010 page table error PGTBL_ER: 0x00000100 [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking fbcon: inteldrmfb (fb0) is primary device Refined TSC clocksource calibration: 2393.999 MHz. Switching to clocksource tsc Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:08: RTC can wake from S4 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 Registering the dns_resolver key type PM: Hibernation image not present or could not be loaded. registered taskstats version 1 rtc_cmos 00:08: setting system clock to 2011-10-27 09:01:48 UTC (1319706108) Freeing unused kernel memory: 392k freed Write protecting the kernel read-only data: 6144k Freeing unused kernel memory: 124k freed Freeing unused kernel memory: 372k freed udevd[50]: starting version 172 SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21 ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21 ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18 ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18 ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66 ata3.00: ATA-8: FUJITSU MHY2160BH, 0081000D, max UDMA/100 ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 ata1.00: configured for UDMA/66 scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2160B 0081 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sda5 sda6 sd 2:0:0:0: [sda] Attached SCSI disk PM: Starting manual resume from disk PM: Hibernation image partition 8:5 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) udevd[242]: starting version 172 ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet sky2: driver version 1.29 sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:03:00.0: irq 44 for MSI/MSI-X sky2 0000:03:00.0: eth0: addr 00:1f:f3:d5:13:ce i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ACPI: Battery Slot [BAT0] (battery present) input: PC Speaker as /devices/platform/pcspkr/input/input5 b43-pci-bridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 b43-pci-bridge 0000:02:00.0: setting latency timer to 64 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0C, vendor 0x4243) ssb: Core 2 found: PCI-E (cc 0x820, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243) ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.1.0.git ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ACPI: AC Adapter [ADP1] (on-line) ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.1.0.git ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.1.0.git uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.1.0.git uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.1.0.git uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 3.1.0.git uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 3.1.0.git uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0 b43-phy0: Broadcom 4321 WLAN found (core revision 12) input: applesmc as /devices/platform/applesmc.768/input/input6 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 firewire_core: created device fw0: GUID 0021e9fffebe792a, S400 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio Broadcom 43xx driver loaded [ Features: PNLS, Firmware-ID: FW13 ] usb 2-4: new high speed USB device number 3 using ehci_hcd hda_codec: ALC889A: SKU not ready 0x400000f0 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 usb 2-4: New USB device found, idVendor=05ac, idProduct=8300 usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1: new full speed USB device number 2 using uhci_hcd usb 3-1: New USB device found, idVendor=05ac, idProduct=1000 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-2: new low speed USB device number 3 using uhci_hcd usb 3-2: New USB device found, idVendor=0a81, idProduct=0205 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: PS2 to USB Converter usb 3-2: Manufacturer: CHESEN input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input8 generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0 input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input9 generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input10 generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-2/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input11 generic-usb 0003:0A81:0205.0004: input,hidraw3: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-2/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 5-1: new low speed USB device number 2 using uhci_hcd usb 5-1: New USB device found, idVendor=045e, idProduct=0040 usb 5-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 5-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) usb 5-1: Manufacturer: Microsoft input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input12 generic-usb 0003:045E:0040.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1/input0 Failed to initialise isight firmware loader usbcore: registered new interface driver isight_firmware usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 usb 7-1: new low speed USB device number 2 using uhci_hcd usb 7-1: New USB device found, idVendor=05ac, idProduct=8242 usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1: Product: IR Receiver usb 7-1: Manufacturer: Apple Computer, Inc. usb 7-2: new full speed USB device number 3 using uhci_hcd usb 7-2: New USB device found, idVendor=05ac, idProduct=022a usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2: Product: Apple Internal Keyboard / Trackpad usb 7-2: Manufacturer: Apple Computer usb 3-1: USB disconnect, device number 2 usb 2-4: USB disconnect, device number 3 appletouch: Geyser mode initialized. input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input13 usbcore: registered new interface driver appletouch apple 0003:05AC:8242.0006: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0 input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input14 apple 0003:05AC:022A.0007: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0 input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input15 apple 0003:05AC:022A.0008: input,hidraw5: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2 usb 2-4: new high speed USB device number 6 using ehci_hcd usb 2-4: New USB device found, idVendor=05ac, idProduct=8501 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: Built-in iSight usb 2-4: Manufacturer: Micron usb 3-1: new full speed USB device number 4 using uhci_hcd Adding 3955912k swap on /dev/sda5. Priority:-1 extents:1 across:3955912k EXT4-fs (sda4): re-mounted. Opts: (null) usb 3-1: New USB device found, idVendor=05ac, idProduct=8205 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Linux video capture interface: v2.00 Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) usbcore: registered new interface driver btusb EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro loop: module loaded i2c /dev entries driver fuse init (API version 7.17) microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16 b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01) ADDRCONF(NETDEV_UP): wlan0: link is not ready sky2 0000:03:00.0: eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present wlan0: direct probe to d8:c7:c8:ad:e3:a1 (try 1/3) wlan0: direct probe to d8:c7:c8:ad:e3:a1 (try 2/3) wlan0: direct probe responded wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX AssocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated wlan0: no IPv6 routers present ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated wlan0: deauthenticating from d8:c7:c8:ad:e3:a1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated wlan0: deauthenticating from d8:c7:c8:ad:e3:a1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) applesmc: TC0D: read arg fail wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated wlan0: deauthenticating from d8:c7:c8:ad:e3:a1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: associate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: associate with d8:c7:c8:ad:e3:a1 (try 3) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ACPI: EC: GPE storm detected, transactions will use polling mode ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: associate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 3) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: associate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: associate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: associate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:a1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 2) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 3) wlan0: authentication with d8:c7:c8:ad:e3:a1 timed out wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated applesmc: TW0P: read arg fail wlan0: deauthenticating from d8:c7:c8:ad:e3:20 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated applesmc: TN0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain applesmc: TM0P: read arg fail wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: associate with d8:c7:c8:ad:e3:20 (try 2) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:20 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:20 (capab=0x421 status=0 aid=1) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:20 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 2) wlan0: authenticate with d8:c7:c8:ad:e3:20 (try 3) wlan0: authentication with d8:c7:c8:ad:e3:20 timed out wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 3) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain applesmc: Th0H: read arg fail wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TC0D: read arg fail ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: associate with 00:24:6c:82:b2:f1 (try 3) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 3) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 3) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TTF0: read data fail ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain applesmc: Th0H: read arg fail wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TC0P: read data fail ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TTF0: read arg fail ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: associate with 00:24:6c:82:b2:f1 (try 2) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticate with 00:24:6c:82:b2:f1 (try 2) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP 00:24:6c:82:b2:f1 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: deauthenticating from 00:24:6c:82:b2:f1 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain