[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1319782638.22700.8.camel@dabdike>
Date: Fri, 28 Oct 2011 08:17:18 +0200
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel@...r.kernel.org
Subject: [GIT PULL] first round of SCSI updates for the 3.1 merge window
This represents the usual round of driver updates (fusion, mvsas, isci,
qla2 qla4, iscsi, lpfc, be2iscsi, bnx2fc, megaraid, fcoe and ipr).
There is also a new Marvell UMI driver and this also contains the gendev
preferred_name update, which will set how the user wants their disk
device to be reported by the kernel printk system. One of the
highlights of the release is the increasing use of the block generic
device to transport configuration information to HBAs.
The head sha1 is
commit 590134fa78fbdbe5fea78c7ae0b2c3364bc9572f
The patch is available here:
git://git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short changelog is:
Adam Radford (11):
megaraid_sas: Fix instance access in megasas_reset_timer
megaraid_sas: Changelog and version update
megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
megaraid_sas: Clear state change interrupts
megaraid_sas: Remove some unnecessary code
megaraid_sas: Fix mismatch in megasas_reset_fusion() mutex lock-unlock
megaraid_sas: Increase default cmds per lun to 256
megaraid_sas: Continue booting immediately if FW in FAULT at driver load time
Anton Blanchard (1):
ipr: Always initiate hard reset in kdump kernel
Bhanu Prakash Gollapudi (34):
bnx2fc: Bumped version to 1.0.8
bnx2fc: Return error statistics of remote peer
fcoe,libfcoe: Move common code for fcoe_get_lesb to fcoe_transport
bnx2fc: call ctlr_link_up only when the interface is enabled
bnx2fc: Bumped version to 1.0.7
bnx2fc: Handle bnx2fc_map_sg failure
bnx2fc: Replace scsi_dma_map() with dma_map_sg().
bnx2fc: Add driver documentation
bnx2fc: Bumped version to 1.0.6
bnx2fc: Fix FW assert during RSCN stress tests
bnx2fc: Fix panic caused because of incorrect errror handling in create().
bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks
bnx2fc: No abort issued for REC when it times out
bnx2fc: Send solicitation only after vlan discovery is complete
bnx2fc: Reset max receive frame size during link up
bnx2fc: Need not schedule destroy_work from __bnx2fc_destroy
bnx2fc: Bump version to 1.0.5
bnx2fc: Prevent creating of NPIV port with duplicate WWN
bnx2fc: Obtain WWNN/WWPN from the shared memory
fcoe: Move common functions to fcoe_transport library
bnx2fc: Drop incoming ABTS
bnx2fc: code cleanup in bnx2fc_offload_session
bnx2fc: Fix NULL pointer deref during arm_cq.
bnx2fc: IO errors when receiving unsolicited LOGO
bnx2fc: Do not reuse the fcoe connection id immediately
bnx2fc: Clear DESTROY_CMPL flag after firmware destroy
bnx2fc: Handle NETDEV_UNREGISTER for vlan devices
bnx2fc: Reorganize cleanup code between interface_cleanup and if_destory
bnx2fc: Change function names of bnx2fc_netdev_setup/bnx2fc_netdev_cleanup
bnx2fc: Do not attempt destroying NPIV port twice
bnx2fc: Remove erroneous kref_get on IO request
bnx2fc: Enable bsg_request support for bnx2fc
bnx2fc: Bug fixes in percpu_thread_create/destroy
bnx2fc: Reset the max receive frame size
Brian King (2):
ipr: Fix BUG on adapter dump timeout
ipr: Stop reading adapter dump prematurely
Chad Dupuis (2):
qla2xxx: Fix "active_mask" may be used uninitialized warning.
qla2xxx: Enable write permission to some debug related module parameters to be changed dynamically.
Chauhan, Vijay (1):
scsi_dh_rdac: Adding NetApp as a brand name for rdac
Christoph Hellwig (3):
libsas: fix sas_queuecommand return values
libsas: reindent sas_queuecommand
libsas: sas_queuecommand doesnt need host_lock
Dan Carpenter (1):
aacraid: use lower snprintf() limit
Dan Williams (15):
libsas: fix port->dev_list locking
isci: export phy events via ->lldd_control_phy()
isci: atapi support
isci: fix support for large smp requests
libsas: fix warnings when checking sata/stp protocol
libsas: fix try_test_sas_gpio_gp_bit() build error
pm8001: remove pm8001_slave_{alloc|configure}
mvsas: remove mvs_slave_{alloc|configure}
libsas: dynamic queue depth
libsas,libata: fix ->change_queue_{depth|type} for sata devices
libsas: disable scanning lun > 0 on ata devices
isci: initial sgpio write support
isci: fix sgpio register definitions
libsas: sgpio write support
libsas: export sas_alloc_task()
Eric Dumazet (1):
fcoe: use kthread_create_on_node
Finn Thain (1):
mac_esp: remove redundant mutual exclusion
Giridhar Malavali (2):
qla2xxx: Issue mailbox command only when firmware hung bit is reset for ISP82xx.
qla2xxx: Add support for ISP82xx to capture dump (minidump) on failure.
Hannes Reinecke (7):
scsi_dh_alua: Decrease retry interval
scsi_dh_alua: Fix Erroneous TPG ID check
scsi_dh: Check for sdev state in store_dh_state()
scsi_dh_alua: always update TPGS status on activate
scsi_dh: Implement match callback function
scsi_dh: Fixup kernel-doc comments
scsi_dh_alua: Evaluate TPGS setting from inquiry data
Harish Zunjarrao (5):
qla4xxx: Added Get ACB support using BSG
qla4xxx: Added restore factory defaults support using BSG
qla4xxx: Add read/update NVRAM support for 40xx adapters using BSG
qla4xxx: Add get ACB state support using BSG
qla4xxx: Code cleanup for read/update flash using BSG
Jack Wang (1):
libsas: set sas_address and device type of rphy
James Smart (10):
lpfc 8.3.27: Change driver version to 8.3.27
lpfc 8.3.27: T10 additions for SLI4
lpfc 8.3.27: Fix queue allocation failure recovery
lpfc 8.3.27: Change algorithm for getting physical port name
lpfc 8.3.27: Changed worst case mailbox timeout
lpfc 8.3.27: Miscellanous logic and interface fixes
lpfc 8.3.26: Change driver version to 8.3.26
lpfc 8.3.26: Fix SYSFS interface issues
lpfc 8.3.26: Fix HBA initialization issues
lpfc 8.3.26: Fix issues pertaining to SCSI/FC protocol.
Jayamohan Kallickal (8):
be2iscsi: Move driver Version to 4.1.239.0
be2iscsi: memset wrb for ring create
be2iscsi: Fix for case where task->sc was cleanedup earlier
be2iscsi: Fix for wrong dmsg setting in wrb
be2iscsi: Fix for kdump failure
be2iscsi: Add pci_disable device
be2iscsi: Adding a shutdown Routine
be2iscsi: Fixing the /proc/interrupts problem V3
Jeff Skirvin (4):
isci: The port state should be set to stopping on the last phy.
isci: fix decode of DONE_CRC_ERR TC completion status
isci: SATA/STP I/O is only returned in the normal path to libsas
isci: fix missed unlock in apc_agent_timeout()
Jianyun Li (1):
mvumi: Add Marvell UMI driver
Joe Carnuccio (3):
qla2xxx: Return sysfs error codes appropriate to conditions.
qla2xxx: Provide method for updating I2C attached VPD.
qla2xxx: Correction to sysfs edc interface.
Julia Lawall (1):
mpt2sas: take size of pointed value, not pointer
Lalit Chandivade (5):
qla4xxx: Free Device Database (DDB) reserved by FW
qla4xxx: Fix getting BIDI CHAP for boot targets
qla4xxx: Fix exporting boot targets to sysfs
qla4xxx: Do not add duplicate CHAP entry in FLASH
qla4xxx: Fix bidirectional CHAP.
Luben Tuikov (1):
libsas: Allow expander T-T attachments
Manish Rangankar (10):
qla4xxx: updated device id check for BFS.
qla4xxx: Fixed target discovery failed issue.
qla4xxx: Fixed active session re-open issue.
qla4xxx: Fixed device blocked issue on link up-down.
qla4xxx: Fixed session destroy issue on link up-down.
qla4xxx: Clear DDB map index on the basis of AEN.
qla4xxx: Boot from SAN support for open-iscsi
qla4xxx: Remove reduandant code after open-iscsi integration.
qla4xxx: support iscsiadm session mgmt
scsi_transport_iscsi: Add conn login, kernel to user, event to support offload session login.
Mark Salyzyn (2):
pm8001: missing break statements
pm8001: fix DEV_IS_GONE infinite retry
Meelis Roos (1):
qlogicpti: fix timeout
Mike Christie (19):
qla4xxx: export address/port of connection (fix udev disk names)
iscsi class: fix vlan configuration
qla4xxx: fix data alignment and use nl helpers
iscsi class: fix link local mispelling
iscsi class: Replace iscsi_get_next_target_id with IDA
qla4xxx: select iscsi boot sysfs attrs
scsi scan: don't fail scans when host is in recovery
qla4xxx: export iface name
iscsi class: add bsg support to iscsi class
libiscsi: don't bugon when if user sets markers
iscsi class: expand vlan support
be2iscsi: remove host and session casts
iscsi class: sysfs group is_visible callout for iscsi host attrs
iscsi class: remove iface param mask
iscsi class: sysfs group is_visible callout for session attrs
iscsi cls: sysfs group is_visible callout for conn attrs
iscsi class: add iface representation
qla4xxx: add support for set_net_config
iscsi_transport: add support for net settings
Mike Miller (1):
hpsa: change confusing message to be more clear
Moger, Babu (2):
scsi_dh_alua: Add one more check-condition for alua handler
scsi_dh_rdac: Adding couple more vendor product ids
Nao Nishijima (2):
sd: Use sd_printk() instead of printk()
genhd: add a new attribute "alias" in gendisk
Nilesh Javali (1):
qla4xxx: Add new FLT firmware region
Nithin Nayak Sujir (1):
bnx2fc: Validate vlan id in NETDEV_UNREGISTER handler
Saurav Kashyap (5):
qla2xxx: During loopdown perform Diagnostic loopback.
qla2xxx: Fix array out of bound warning.
qla2xxx: check for marker IOCB during response queue processing.
qla2xxx: Prevent CPU lockups when "ql2xdontresethba" module param is set.
qla2xxx: Implemeted beacon on/off for ISP82XX.
Steffen Maier (1):
zfcp: non-experimental support for DIF/DIX
Swen Schillig (2):
zfcp: support for hardware data router
qdio: base support for hardware data router with zfcp
TARUISI Hiroaki (1):
Fix out of spec CD-ROM problem with media change
Vasu Dev (5):
fcoe: setup default initial value for DDP threshold
fcoe: use real dev in case of HW vlan acceleration
libfc: cache align fc_exch_pool
libfc: cache align struct fc_exch fields
libfc: cache align struct fc_fcp_pkt fields
Vikas Chaudhary (13):
qla4xxx: Update driver version to 5.02.00-k8
qla4xxx: Update license
qla4xxx: Added support for adapter and firmware reset
scsi: Added support for adapter and firmware reset
qla4xxx: added support to update initiator iscsi port
scsi_transport_iscsi: Added support to update initiator iscsi port
qla4xxx: Added vendor specific sysfs attributes
qla4xxx: Added support to update mtu
scsi_transport_iscsi: Added support to update mtu
qla4xxx: add bsg support
qla4xxx: Add VLAN support
qla4xxx: added support to show multiple iface in sysfs
qla4xxx: Added new "struct ipaddress_config"
Wayne Boyer (1):
ipr: Add support to flash FPGA and flash back DRAM images
Xiangliang Yu (8):
mvsas: update driver version
mvsas: fixed SMP request watchdog timeout issue.
mvsas: expander write performance enhancement
mvsas: change SL mode0 register value
mvsas: fixed wrong destination when hiting NAK for command frame
mvsas: fixed some disk spin up issue
mvsas: add support for 9480 device id
mvsas: fix expander link error
kashyap.desai@....com (6):
mptfusion: Fix for device offline while doing aggressive HBA reset
mpt2sas: Added missing mpt2sas_base_detach call from scsih_remove context
mptfusion: Bump version 3.4.20
mptfusion: Avoid out of order Event processing due to cpu migration
mptfusion: Better handling of DEAD IOC PCI-E Link down error condition
mptfusion: Set max sector count module parameter
nagalakshmi.nandigama@....com (3):
mptfusion: Added check for SILI bit in READ_16 CDB for DATA UNDERRUN ERRATA
mpt2sas: Bump driver version 09.100.00.01
mpt2sas: Added NUNA IO support in driver which uses multi-reply queue support of the HBA
and the diffstat
Documentation/ABI/testing/sysfs-block | 13 +
Documentation/scsi/00-INDEX | 2 +
Documentation/scsi/ChangeLog.megaraid_sas | 15 +
Documentation/scsi/LICENSE.qla4xxx | 310 ++++
Documentation/scsi/bnx2fc.txt | 75 +
arch/s390/include/asm/qdio.h | 5 +
block/genhd.c | 71 +
drivers/ata/libata-core.c | 1 +
drivers/ata/libata-scsi.c | 44 +-
drivers/infiniband/ulp/iser/iscsi_iser.c | 80 +-
drivers/message/fusion/mptbase.c | 92 +-
drivers/message/fusion/mptbase.h | 72 +-
drivers/message/fusion/mptsas.c | 47 +-
drivers/message/fusion/mptscsih.c | 18 +-
drivers/message/fusion/mptscsih.h | 1 +
drivers/s390/cio/qdio_main.c | 11 +-
drivers/s390/cio/qdio_setup.c | 1 +
drivers/s390/scsi/zfcp_dbf.c | 36 +
drivers/s390/scsi/zfcp_def.h | 7 +
drivers/s390/scsi/zfcp_ext.h | 1 +
drivers/s390/scsi/zfcp_fsf.c | 80 +-
drivers/s390/scsi/zfcp_qdio.c | 58 +-
drivers/s390/scsi/zfcp_qdio.h | 66 +-
drivers/s390/scsi/zfcp_scsi.c | 15 +-
drivers/scsi/Kconfig | 14 +-
drivers/scsi/Makefile | 1 +
drivers/scsi/aacraid/linit.c | 7 +-
drivers/scsi/aic94xx/aic94xx_scb.c | 1 +
drivers/scsi/be2iscsi/be_cmds.c | 20 +
drivers/scsi/be2iscsi/be_cmds.h | 2 +
drivers/scsi/be2iscsi/be_iscsi.c | 60 +-
drivers/scsi/be2iscsi/be_iscsi.h | 2 +
drivers/scsi/be2iscsi/be_main.c | 112 +-
drivers/scsi/be2iscsi/be_main.h | 5 +-
drivers/scsi/bnx2fc/bnx2fc.h | 3 +-
drivers/scsi/bnx2fc/bnx2fc_els.c | 26 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 226 ++-
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 16 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 32 +-
drivers/scsi/bnx2fc/bnx2fc_tgt.c | 23 +-
drivers/scsi/bnx2i/bnx2i_iscsi.c | 80 +-
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 20 +-
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 20 +-
drivers/scsi/cxgbi/libcxgbi.c | 56 +
drivers/scsi/cxgbi/libcxgbi.h | 1 +
drivers/scsi/device_handler/scsi_dh.c | 61 +-
drivers/scsi/device_handler/scsi_dh_alua.c | 107 +-
drivers/scsi/device_handler/scsi_dh_rdac.c | 6 +-
drivers/scsi/fcoe/fcoe.c | 103 +-
drivers/scsi/fcoe/fcoe.h | 11 +-
drivers/scsi/fcoe/fcoe_transport.c | 101 ++
drivers/scsi/hpsa.c | 6 +-
drivers/scsi/ipr.c | 31 +-
drivers/scsi/ipr.h | 4 +-
drivers/scsi/isci/host.c | 69 +
drivers/scsi/isci/host.h | 15 +
drivers/scsi/isci/init.c | 3 +
drivers/scsi/isci/isci.h | 2 +-
drivers/scsi/isci/phy.c | 11 +
drivers/scsi/isci/port.c | 2 +-
drivers/scsi/isci/port_config.c | 2 +-
drivers/scsi/isci/registers.h | 122 +--
drivers/scsi/isci/remote_device.c | 24 +
drivers/scsi/isci/remote_device.h | 9 +
drivers/scsi/isci/request.c | 380 ++++-
drivers/scsi/isci/request.h | 31 +-
drivers/scsi/isci/sas.h | 2 -
drivers/scsi/isci/task.c | 29 +-
drivers/scsi/isci/task.h | 19 +
drivers/scsi/iscsi_tcp.c | 83 +-
drivers/scsi/libfc/fc_exch.c | 11 +-
drivers/scsi/libfc/fc_fcp.c | 2 -
drivers/scsi/libiscsi.c | 9 -
drivers/scsi/libsas/sas_discover.c | 13 +-
drivers/scsi/libsas/sas_expander.c | 37 +-
drivers/scsi/libsas/sas_host_smp.c | 103 ++-
drivers/scsi/libsas/sas_init.c | 43 +-
drivers/scsi/libsas/sas_scsi_host.c | 145 +-
drivers/scsi/lpfc/lpfc.h | 20 +-
drivers/scsi/lpfc/lpfc_attr.c | 79 +-
drivers/scsi/lpfc/lpfc_crtn.h | 4 +-
drivers/scsi/lpfc/lpfc_ct.c | 3 +
drivers/scsi/lpfc/lpfc_debugfs.c | 181 ++
drivers/scsi/lpfc/lpfc_els.c | 33 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 7 +-
drivers/scsi/lpfc/lpfc_hw4.h | 300 +++-
drivers/scsi/lpfc/lpfc_init.c | 287 ++--
drivers/scsi/lpfc/lpfc_logmsg.h | 1 +
drivers/scsi/lpfc/lpfc_mbox.c | 80 +-
drivers/scsi/lpfc/lpfc_scsi.c | 244 +++-
drivers/scsi/lpfc/lpfc_sli.c | 460 ++++--
drivers/scsi/lpfc/lpfc_sli.h | 18 +-
drivers/scsi/lpfc/lpfc_sli4.h | 23 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/lpfc/lpfc_vport.c | 16 +-
drivers/scsi/mac_esp.c | 9 -
drivers/scsi/megaraid/megaraid_sas.h | 22 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 239 ++-
drivers/scsi/megaraid/megaraid_sas_fp.c | 26 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 193 ++-
drivers/scsi/megaraid/megaraid_sas_fusion.h | 19 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 447 ++++--
drivers/scsi/mpt2sas/mpt2sas_base.h | 46 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 28 +
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 2 +
drivers/scsi/mpt2sas/mpt2sas_transport.c | 2 +-
drivers/scsi/mvsas/mv_94xx.c | 35 +
drivers/scsi/mvsas/mv_defs.h | 2 +
drivers/scsi/mvsas/mv_init.c | 13 +-
drivers/scsi/mvsas/mv_sas.c | 79 +-
drivers/scsi/mvsas/mv_sas.h | 4 +-
drivers/scsi/mvumi.c | 2018 +++++++++++++++++++++
drivers/scsi/mvumi.h | 505 ++++++
drivers/scsi/pm8001/pm8001_hwi.c | 73 +-
drivers/scsi/pm8001/pm8001_init.c | 4 +-
drivers/scsi/pm8001/pm8001_sas.c | 93 +-
drivers/scsi/pm8001/pm8001_sas.h | 2 -
drivers/scsi/qla2xxx/qla_attr.c | 111 +-
drivers/scsi/qla2xxx/qla_bsg.c | 152 ++
drivers/scsi/qla2xxx/qla_bsg.h | 42 +
drivers/scsi/qla2xxx/qla_dbg.c | 6 +-
drivers/scsi/qla2xxx/qla_def.h | 9 +-
drivers/scsi/qla2xxx/qla_gbl.h | 18 +
drivers/scsi/qla2xxx/qla_init.c | 36 +-
drivers/scsi/qla2xxx/qla_isr.c | 5 +
drivers/scsi/qla2xxx/qla_mbx.c | 127 ++
drivers/scsi/qla2xxx/qla_nx.c | 970 ++++++++++-
drivers/scsi/qla2xxx/qla_nx.h | 255 +++-
drivers/scsi/qla2xxx/qla_os.c | 46 +-
drivers/scsi/qla4xxx/Kconfig | 1 +
drivers/scsi/qla4xxx/Makefile | 2 +-
drivers/scsi/qla4xxx/ql4_attr.c | 76 +
drivers/scsi/qla4xxx/ql4_bsg.c | 513 ++++++
drivers/scsi/qla4xxx/ql4_bsg.h | 19 +
drivers/scsi/qla4xxx/ql4_def.h | 214 ++-
drivers/scsi/qla4xxx/ql4_fw.h | 198 ++-
drivers/scsi/qla4xxx/ql4_glbl.h | 71 +-
drivers/scsi/qla4xxx/ql4_init.c | 852 ++--------
drivers/scsi/qla4xxx/ql4_iocb.c | 68 +-
drivers/scsi/qla4xxx/ql4_isr.c | 83 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 820 ++++++++-
drivers/scsi/qla4xxx/ql4_nvram.c | 21 +
drivers/scsi/qla4xxx/ql4_nx.c | 17 +
drivers/scsi/qla4xxx/ql4_os.c | 2515 ++++++++++++++++++++++-----
drivers/scsi/qla4xxx/ql4_version.h | 2 +-
drivers/scsi/qlogicpti.c | 2 +-
drivers/scsi/scsi_error.c | 12 +-
drivers/scsi/scsi_sysfs.c | 38 +
drivers/scsi/scsi_transport_iscsi.c | 738 +++++++--
drivers/scsi/scsi_transport_sas.c | 10 +-
drivers/scsi/sd.c | 7 +-
include/linux/genhd.h | 4 +
include/linux/libata.h | 2 +
include/scsi/iscsi_if.h | 135 +-
include/scsi/libfc.h | 76 +-
include/scsi/libfcoe.h | 5 +
include/scsi/libsas.h | 54 +-
include/scsi/sas.h | 24 +-
include/scsi/scsi_bsg_iscsi.h | 110 ++
include/scsi/scsi_device.h | 6 +
include/scsi/scsi_host.h | 16 +-
include/scsi/scsi_transport_iscsi.h | 47 +-
162 files changed, 14194 insertions(+), 3404 deletions(-)
create mode 100644 Documentation/scsi/LICENSE.qla4xxx
create mode 100644 Documentation/scsi/bnx2fc.txt
create mode 100644 drivers/scsi/mvumi.c
create mode 100644 drivers/scsi/mvumi.h
create mode 100644 drivers/scsi/qla4xxx/ql4_bsg.c
create mode 100644 drivers/scsi/qla4xxx/ql4_bsg.h
create mode 100644 include/scsi/scsi_bsg_iscsi.h
James
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists