Linux version 3.1.0-GIT (tomas@emmet) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #72 SMP PREEMPT Tue Oct 25 10:45:46 ART 2011 Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f7c0000 (usable) BIOS-e820: 000000007f7c0000 - 000000007f7ce000 (ACPI data) BIOS-e820: 000000007f7ce000 - 000000007f800000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI present. DMI: Everex Systems, Inc. Everex StepNote Series/Everex StepNote Series, BIOS 080013 03/20/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7f7c0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F800000 mask FFF800000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. found SMP MP-table at [c00ff780] ff780 initial memory mapped : 0 - 01800000 Base memory trampoline at [c009b000] 9b000 size 16384 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 17fb000-1800000 RAMDISK: 7f5e3000 - 7f7b0000 Allocated new RAMDISK: 37631000 - 377fd455 Move RAMDISK from 000000007f5e3000 - 000000007f7af454 to 37631000 - 377fd454 ACPI: RSDP 000f8d30 00014 (v00 ACPIAM) ACPI: RSDT 7f7c0000 0003C (v01 FICINC FIRST NB 03000720 MSFT 00000097) ACPI: FACP 7f7c0200 00084 (v02 FICINC OEM-FACP 03000720 MSFT 00000097) ACPI: DSDT 7f7c05b0 06433 (v01 H12YV H12YV000 00000000 INTL 20050930) ACPI: FACS 7f7ce000 00040 ACPI: APIC 7f7c0390 0005C (v01 FICINC OEM-APIC 03000720 MSFT 00000097) ACPI: MCFG 7f7c03f0 0003C (v01 FICINC OEM-MCFG 03000720 MSFT 00000097) ACPI: SLIC 7f7c0430 00176 (v01 FICINC FIRST NB 03000720 MSFT 00000097) ACPI: OEMB 7f7ce040 00131 (v01 FICINC AMI_OEMB 03000720 MSFT 00000097) ACPI: HPET 7f7c69f0 00038 (v01 FICINC OEM_HPET 03000720 MSFT 00000097) ACPI: Local APIC address 0xfee00000 1151MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f7c0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007f7c0 On node 0 totalpages: 522063 free_area_init_node: node 0, pgdat c143a540, node_mem_map f6640200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2304 pages used for memmap HighMem zone: 292546 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a202 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @f6000000 s25024 r0 d24128 u2097152 pcpu-alloc: s25024 r0 d24128 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517983 Kernel command line: root=/dev/disk/by-uuid/979e2d41-3d28-4e78-83ec-7b4ed4541dfc resume=/dev/disk/by-uuid/f83924df-3dd0-4b60-a263-54f3fcade1d2 video=VGA-1:1680x1050 reserve=0xffb00000,0x100000 ro quiet PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007f7c0) Memory: 2063596k/2088704k available (3128k kernel code, 24656k reserved, 1222k data, 412k init, 1179400k highmem) virtual kernel memory layout: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1440000 - 0xc14a7000 ( 412 kB) .data : 0xc130e295 - 0xc143fc80 (1222 kB) .text : 0xc1000000 - 0xc130e295 (3128 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:512 CPU 0 irqstacks, hard=f5c0c000 soft=f5c0e000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1729.086 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.17 BogoMIPS (lpj=1729086) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20110623 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c Performance Events: Core events, core PMU driver. ... version: 1 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 CPU 1 irqstacks, hard=f5c64000 soft=f5c66000 Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Disabled fast string operations Brought up 2 CPUs Total of 2 processors activated (6916.04 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region at 7f7ce000 (204800 bytes) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI Warning: Incorrect checksum in table [OEMB] - 0x08, should be 0x97 (20110623/tbutils-314) ACPI: SSDT 7f7d23e0 00661 (v01 AMI CPU1PM 00000001 INTL 20050930) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00661 (v01 AMI CPU1PM 00000001 INTL 20050930) ACPI: SSDT 7f7d2a50 00661 (v01 AMI CPU2PM 00000001 INTL 20050930) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00661 (v01 AMI CPU2PM 00000001 INTL 20050930) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600 pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xffe80000-0xffefffff] pci 0000:00:02.0: reg 14: [io 0xec00-0xec07] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: reg 1c: [mem 0xffe40000-0xffe7ffff] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0xffd80000-0xffdfffff] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xffe34000-0xffe37fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0xe880-0xe89f] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0xe480-0xe49f] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0xe400-0xe41f] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xffe3b800-0xffe3bbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601 pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101 pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] pci 0000:00:1c.1: bridge window [mem 0xfef00000-0xff2fffff] pci 0000:03:04.0: [10ec:8139] type 0 class 0x000200 pci 0000:03:04.0: reg 10: [io 0xd800-0xd8ff] pci 0000:03:04.0: reg 14: [mem 0xffbfec00-0xffbfecff] pci 0000:03:04.0: supports D1 D2 pci 0000:03:04.0: PME# supported from D1 D2 D3hot D3cold pci 0000:03:04.0: PME# disabled pci 0000:03:06.0: [1217:00f7] type 0 class 0x000c00 pci 0000:03:06.0: reg 10: [mem 0x00000000-0x00000fff] pci 0000:03:06.0: reg 14: [mem 0xffbfe000-0xffbfe7ff] pci 0000:03:06.0: supports D1 D2 pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:06.0: PME# disabled pci 0000:03:06.2: [1217:7120] type 0 class 0x000805 pci 0000:03:06.2: reg 10: [mem 0xffbfe800-0xffbfe8ff] pci 0000:03:06.2: supports D1 D2 pci 0000:03:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:06.2: PME# disabled pci 0000:03:06.3: [1217:7130] type 0 class 0x000180 pci 0000:03:06.3: reg 10: [mem 0xffbff000-0xffbfffff] pci 0000:03:06.3: supports D1 D2 pci 0000:03:06.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:06.3: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xff300000-0xffbfffff] pci 0000:00:1e.0: bridge window [mem 0xbdf00000-0xbfefffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:1e.0: address space collision: [mem 0xff300000-0xffbfffff] conflicts with reserved [??? 0xffb00000-0xffbfffff flags 0x80000000] pci 0000:03:04.0: address space collision: [mem 0xffbfec00-0xffbfecff] conflicts with reserved [??? 0xffb00000-0xffbfffff flags 0x80000000] pci 0000:03:06.2: address space collision: [mem 0xffbfe800-0xffbfe8ff] conflicts with reserved [??? 0xffb00000-0xffbfffff flags 0x80000000] pci 0000:03:06.3: address space collision: [mem 0xffbff000-0xffbfffff] conflicts with reserved [??? 0xffb00000-0xffbfffff flags 0x80000000] pci 0000:03:06.0: address space collision: [mem 0xffbfe000-0xffbfe7ff] conflicts with reserved [??? 0xffb00000-0xffbfffff flags 0x80000000] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007f7c0000 - 000000007fffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0x7f800000-0xdfffffff window] pnp 00:00: [mem 0xf0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed13000-0xfed19fff] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0060] pnp 00:04: [io 0x0064] pnp 00:04: [irq 1] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:05: [irq 12] pnp 00:05: Plug and Play ACPI device, IDs SYN0911 SYN0900 SYN0002 PNP0f13 (active) pnp 00:06: [io 0x0061] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: [io 0x00f0-0x00ff] pnp 00:07: [irq 13] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:08: [mem 0xfed00000-0xfed003ff] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:09: [mem 0xfec00000-0xfec00fff] pnp 00:09: [mem 0xfee00000-0xfee00fff] Switched to NOHz mode on CPU #0 system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Switched to NOHz mode on CPU #1 pnp 00:0a: [io 0x0010-0x001f] pnp 00:0a: [io 0x0022-0x003f] pnp 00:0a: [io 0x0044-0x005f] pnp 00:0a: [io 0x0063] pnp 00:0a: [io 0x0065] pnp 00:0a: [io 0x0067-0x006f] pnp 00:0a: [io 0x0072-0x007f] pnp 00:0a: [io 0x0080] pnp 00:0a: [io 0x0084-0x0086] pnp 00:0a: [io 0x0088] pnp 00:0a: [io 0x008c-0x008e] pnp 00:0a: [io 0x0090-0x009f] pnp 00:0a: [io 0x00a2-0x00bf] pnp 00:0a: [io 0x00e0-0x00ef] pnp 00:0a: [io 0x04d0-0x04d1] pnp 00:0a: [io 0x0800-0x087f] pnp 00:0a: [io 0x0000-0xffffffff disabled] pnp 00:0a: [io 0x0480-0x04bf] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] pnp 00:0a: [mem 0xfed20000-0xfed8ffff] pnp 00:0a: [mem 0xffb00000-0xffbfffff] pnp 00:0a: [mem 0xfff00000-0xffffffff] system 00:0a: [io 0x04d0-0x04d1] has been reserved system 00:0a: [io 0x0800-0x087f] has been reserved system 00:0a: [io 0x0480-0x04bf] has been reserved system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:0a: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0xe0000000-0xefffffff] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x00000000-0x0009ffff] pnp 00:0c: [mem 0x000c0000-0x000cffff] pnp 00:0c: [mem 0x000e0000-0x000fffff] pnp 00:0c: [mem 0x00100000-0x7f7fffff] pnp 00:0c: [mem 0xfec00000-0xffffffff] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0c: [mem 0x00100000-0x7f7fffff] could not be reserved system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1e.0: BAR 14: assigned [mem 0x80000000-0x800fffff] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80300000-0x804fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80500000-0x806fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff] pci 0000:00:1c.0: bridge window [mem 0x80500000-0x806fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] pci 0000:00:1c.1: bridge window [mem 0xfef00000-0xff2fffff] pci 0000:00:1c.1: bridge window [mem 0x80100000-0x802fffff 64bit pref] pci 0000:03:06.0: BAR 0: assigned [mem 0x80000000-0x80000fff] pci 0000:03:06.0: BAR 0: set to [mem 0x80000000-0x80000fff] (PCI address [0x80000000-0x80000fff]) pci 0000:03:06.3: BAR 0: assigned [mem 0x80001000-0x80001fff] pci 0000:03:06.3: BAR 0: set to [mem 0x80001000-0x80001fff] (PCI address [0x80001000-0x80001fff]) pci 0000:03:06.0: BAR 1: assigned [mem 0x80002000-0x800027ff] pci 0000:03:06.0: BAR 1: set to [mem 0x80002000-0x800027ff] (PCI address [0x80002000-0x800027ff]) pci 0000:03:04.0: BAR 1: assigned [mem 0x80002800-0x800028ff] pci 0000:03:04.0: BAR 1: set to [mem 0x80002800-0x800028ff] (PCI address [0x80002800-0x800028ff]) pci 0000:03:06.2: BAR 0: assigned [mem 0x80002900-0x800029ff] pci 0000:03:06.2: BAR 0: set to [mem 0x80002900-0x800029ff] (PCI address [0x80002900-0x800029ff]) pci 0000:00:1e.0: PCI bridge to [bus 03-04] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x800fffff] pci 0000:00:1e.0: bridge window [mem 0xbdf00000-0xbfefffff 64bit pref] pci 0000:00:1c.0: enabling device (0104 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] pci_bus 0000:01: resource 1 [mem 0x80300000-0x804fffff] pci_bus 0000:01: resource 2 [mem 0x80500000-0x806fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] pci_bus 0000:02: resource 1 [mem 0xfef00000-0xff2fffff] pci_bus 0000:02: resource 2 [mem 0x80100000-0x802fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff] pci_bus 0000:03: resource 1 [mem 0x80000000-0x800fffff] pci_bus 0000:03: resource 2 [mem 0xbdf00000-0xbfefffff 64bit pref] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 32 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 1844k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1319581312.234:1): initialized highmem bounce pool size: 64 pages msgmni has been set to 1730 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/PNP0C0D:00/input/input0 ACPI: Lid Switch [LIDD] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] acpi device:20: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Checking hibernation image partition /dev/disk/by-uuid/f83924df-3dd0-4b60-a263-54f3fcade1d2 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Refined TSC clocksource calibration: 1728.999 MHz. Switching to clocksource tsc PM: Hibernation image not present or could not be loaded. registered taskstats version 1 Freeing unused kernel memory: 412k freed udevd[32]: starting version 174 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb SCSI subsystem initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 libata version 3.00 loaded. ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffe3b800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata2.00: ATAPI: Optiarc DVD RW AD-5530A, AX24, max UDMA/33 ata1.00: ATA-7: FUJITSU MHV2100BH PL, 00000029, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-5530A AX24 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 < sda5 > sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-2: new high speed USB device number 2 using ehci_hcd PM: Starting manual resume from disk PM: Hibernation image partition 8:5 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with writeback data mode udevd[204]: starting version 174 ACPI: acpi_idle registered with cpuidle Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet P-state transition latency capped at 20 uS i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 intel_rng: FWH not detected ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [AC] (off-line) 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 8139too 0000:03:04.0: eth0: RealTek RTL8139 at 0xf89f6800, 00:40:45:2d:b8:44, IRQ 16 iTCO_vendor_support: vendor-support=0 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (53 C) ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT0] (battery present) iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) firewire_ohci 0000:03:06.0: enabling device (0015 -> 0017) firewire_ohci 0000:03:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0 firewire_ohci: Added fw-ohci device 0000:03:06.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x10 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC262: BIOS auto-probing. input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 firewire_core: created device fw0: GUID 00012f65ab60c248, S400 cfg80211: Calling CRDA to update world regulatory domain usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy0::radio Registered led device: rt73usb-phy0::assoc Registered led device: rt73usb-phy0::quality usbcore: registered new interface driver rt73usb EXT3-fs (sda3): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with writeback data mode Adding 3004116k swap on /dev/sda5. Priority:-1 extents:1 across:3004116k uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated fuse init (API version 7.17) uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 PM: Preallocating image memory... done (allocated 302363 pages) PM: Allocated 1209452 kbytes in 0.23 seconds (5258.48 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled PM: freeze of devices complete after 19.215 msecs PM: late freeze of devices complete after 0.615 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 204574 pages PM: Normal pages needed: 97303 + 1024, available pages: 210183 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) PM: early restore of devices complete after 0.978 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb1: root hub lost power or was reset pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain firewire_core: rediscovered device fw0 PM: restore of devices complete after 579.890 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy1::radio Registered led device: rt73usb-phy1::assoc Registered led device: rt73usb-phy1::quality PM: Image restored successfully. Restarting tasks ... done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy2::radio Registered led device: rt73usb-phy2::assoc Registered led device: rt73usb-phy2::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb 1-7: new high speed USB device number 3 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 4 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input9 generic-usb 0003:05D5:6782.0001: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input10 generic-usb 0003:05D5:6782.0002: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 3-1: new low speed USB device number 2 using uhci_hcd input: Genius Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11 generic-usb 0003:0458:003A.0003: input,hidraw2: USB HID v1.10 Mouse [Genius Laser Mouse] on usb-0000:00:1d.1-1/input0 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk snd_hda_intel 0000:00:1b.0: PCI INT A disabled ata_piix 0000:00:1f.2: PCI INT B disabled PM: suspend of devices complete after 1029.613 msecs PM: late suspend of devices complete after 11.210 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xffd80000) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80618051) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80408030) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x2020b) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80218011) pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xffb0ff30, writing 0x80008000) 8139too 0000:03:04.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002800) 8139too 0000:03:04.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801) 8139too 0000:03:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) 8139too 0000:03:04.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) firewire_ohci 0000:03:06.0: restoring config space at offset 0xf (was 0x100, writing 0x105) firewire_ohci 0000:03:06.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x4 (was 0x0, writing 0x80000000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2180017) pci 0000:03:06.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.2: restoring config space at offset 0x4 (was 0x0, writing 0x80002900) pci 0000:03:06.2: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) pci 0000:03:06.3: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.3: restoring config space at offset 0x4 (was 0x0, writing 0x80001000) pci 0000:03:06.3: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x4100000, writing 0x84100002) PM: early resume of devices complete after 1.107 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 2 using uhci_hcd ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/33 ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 PM: resume of devices complete after 2634.311 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy3: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy3::radio Registered led device: rt73usb-phy3::assoc Registered led device: rt73usb-phy3::quality PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy4: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy4::radio Registered led device: rt73usb-phy4::assoc Registered led device: rt73usb-phy4::quality usbcore: registered new interface driver rt73usb usb 1-7: USB disconnect, device number 3 usb 1-7.1: USB disconnect, device number 4 generic-usb 0003:05D5:6782.0002: can't reset device, 0000:00:1d.7-7.1/input1, status -71 usb 1-7: clear tt 1 (0040) error -19 usb 1-7: new high speed USB device number 6 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 7 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input12 generic-usb 0003:05D5:6782.0004: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input13 generic-usb 0003:05D5:6782.0005: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 302339 pages) PM: Allocated 1209356 kbytes in 0.81 seconds (1493.03 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled PM: freeze of devices complete after 331.577 msecs PM: late freeze of devices complete after 0.738 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 149676 pages PM: Normal pages needed: 23175 + 1024, available pages: 204003 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x84100002, writing 0x4100002) PM: early restore of devices complete after 1.006 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb1: root hub lost power or was reset pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 usb 1-7: reset high speed USB device number 6 using ehci_hcd firewire_core: rediscovered device fw0 usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain usb 3-1: reset low speed USB device number 2 using uhci_hcd usb 1-7.1: reset low speed USB device number 7 using ehci_hcd PM: restore of devices complete after 1861.421 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy5: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy5::radio Registered led device: rt73usb-phy5::assoc Registered led device: rt73usb-phy5::quality PM: Image restored successfully. Restarting tasks ... done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy6: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy6::radio Registered led device: rt73usb-phy6::assoc Registered led device: rt73usb-phy6::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated usb 1-7: USB disconnect, device number 6 usb 1-7.1: USB disconnect, device number 7 usb 1-7: new high speed USB device number 8 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 9 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input14 generic-usb 0003:05D5:6782.0006: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input15 generic-usb 0003:05D5:6782.0007: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk snd_hda_intel 0000:00:1b.0: PCI INT A disabled ata_piix 0000:00:1f.2: PCI INT B disabled PM: suspend of devices complete after 1032.583 msecs PM: late suspend of devices complete after 11.218 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xffd80000) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80618051) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80408030) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x2020b) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80218011) pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xffb0ff30, writing 0x80008000) 8139too 0000:03:04.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002800) 8139too 0000:03:04.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801) 8139too 0000:03:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) 8139too 0000:03:04.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) firewire_ohci 0000:03:06.0: restoring config space at offset 0xf (was 0x100, writing 0x105) firewire_ohci 0000:03:06.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x4 (was 0x0, writing 0x80000000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2180017) pci 0000:03:06.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.2: restoring config space at offset 0x4 (was 0x0, writing 0x80002900) pci 0000:03:06.2: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) pci 0000:03:06.3: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.3: restoring config space at offset 0x4 (was 0x0, writing 0x80001000) pci 0000:03:06.3: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x4100000, writing 0x84100002) PM: early resume of devices complete after 1.110 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 2 using uhci_hcd ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/33 ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 PM: resume of devices complete after 2634.229 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy7: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy7::radio Registered led device: rt73usb-phy7::assoc Registered led device: rt73usb-phy7::quality PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy8: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy8::radio Registered led device: rt73usb-phy8::assoc Registered led device: rt73usb-phy8::quality usbcore: registered new interface driver rt73usb usb 1-7: USB disconnect, device number 8 usb 1-7.1: USB disconnect, device number 9 generic-usb 0003:05D5:6782.0007: can't reset device, 0000:00:1d.7-7.1/input1, status -71 usb 1-7: clear tt 1 (0090) error -19 usb 1-7: new high speed USB device number 10 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 11 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input16 generic-usb 0003:05D5:6782.0008: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input17 generic-usb 0003:05D5:6782.0009: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=2) wlan0: associated PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk snd_hda_intel 0000:00:1b.0: PCI INT A disabled ata_piix 0000:00:1f.2: PCI INT B disabled PM: suspend of devices complete after 1030.601 msecs PM: late suspend of devices complete after 11.200 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xffd80000) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80618051) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80408030) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x2020b) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80218011) pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xffb0ff30, writing 0x80008000) 8139too 0000:03:04.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002800) 8139too 0000:03:04.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801) 8139too 0000:03:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) 8139too 0000:03:04.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) firewire_ohci 0000:03:06.0: restoring config space at offset 0xf (was 0x100, writing 0x105) firewire_ohci 0000:03:06.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x4 (was 0x0, writing 0x80000000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2180017) pci 0000:03:06.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.2: restoring config space at offset 0x4 (was 0x0, writing 0x80002900) pci 0000:03:06.2: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) pci 0000:03:06.3: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.3: restoring config space at offset 0x4 (was 0x0, writing 0x80001000) pci 0000:03:06.3: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) PM: early resume of devices complete after 1.108 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 2 using uhci_hcd ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/33 ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 PM: resume of devices complete after 2631.991 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy9: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy9::radio Registered led device: rt73usb-phy9::assoc Registered led device: rt73usb-phy9::quality PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd usb 1-7: USB disconnect, device number 10 usb 1-7.1: USB disconnect, device number 11 ieee80211 phy10: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy10::radio Registered led device: rt73usb-phy10::assoc Registered led device: rt73usb-phy10::quality usbcore: registered new interface driver rt73usb usb 1-7: new high speed USB device number 12 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 13 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input18 generic-usb 0003:05D5:6782.000A: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input19 generic-usb 0003:05D5:6782.000B: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=2) wlan0: associated PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk snd_hda_intel 0000:00:1b.0: PCI INT A disabled ata_piix 0000:00:1f.2: PCI INT B disabled PM: suspend of devices complete after 1042.597 msecs PM: late suspend of devices complete after 11.207 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xffd80000) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80618051) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80408030) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x2020b) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80218011) pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xffb0ff30, writing 0x80008000) 8139too 0000:03:04.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002800) 8139too 0000:03:04.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801) 8139too 0000:03:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) 8139too 0000:03:04.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) firewire_ohci 0000:03:06.0: restoring config space at offset 0xf (was 0x100, writing 0x105) firewire_ohci 0000:03:06.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x4 (was 0x0, writing 0x80000000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2180017) pci 0000:03:06.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.2: restoring config space at offset 0x4 (was 0x0, writing 0x80002900) pci 0000:03:06.2: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) pci 0000:03:06.3: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.3: restoring config space at offset 0x4 (was 0x0, writing 0x80001000) pci 0000:03:06.3: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) PM: early resume of devices complete after 1.108 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 2 using uhci_hcd ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/33 ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 PM: resume of devices complete after 2637.091 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy11: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy11::radio Registered led device: rt73usb-phy11::assoc Registered led device: rt73usb-phy11::quality PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy12: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy12::radio Registered led device: rt73usb-phy12::assoc Registered led device: rt73usb-phy12::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated usb 1-7: USB disconnect, device number 12 usb 1-7.1: USB disconnect, device number 13 usb 1-7: new high speed USB device number 14 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 15 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input20 generic-usb 0003:05D5:6782.000C: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input21 generic-usb 0003:05D5:6782.000D: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 302355 pages) PM: Allocated 1209420 kbytes in 0.58 seconds (2085.20 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled PM: freeze of devices complete after 332.194 msecs PM: late freeze of devices complete after 0.733 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 151115 pages PM: Normal pages needed: 31259 + 1024, available pages: 195919 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x84100002, writing 0x4100002) PM: early restore of devices complete after 1.003 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb1: root hub lost power or was reset pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 2 using uhci_hcd usb 1-7: reset high speed USB device number 14 using ehci_hcd usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain usb 1-7.1: reset low speed USB device number 15 using ehci_hcd PM: restore of devices complete after 1864.099 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy13: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy13::radio Registered led device: rt73usb-phy13::assoc Registered led device: rt73usb-phy13::quality PM: Image restored successfully. Restarting tasks ... done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy14: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy14::radio Registered led device: rt73usb-phy14::assoc Registered led device: rt73usb-phy14::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=2) wlan0: associated usb 1-7: USB disconnect, device number 14 usb 1-7.1: USB disconnect, device number 15 usb 1-7: new high speed USB device number 16 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 17 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input22 generic-usb 0003:05D5:6782.000E: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input23 generic-usb 0003:05D5:6782.000F: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb 3-1: USB disconnect, device number 2 usb 3-1: new low speed USB device number 3 using uhci_hcd input: Genius Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input24 generic-usb 0003:0458:003A.0010: input,hidraw2: USB HID v1.10 Mouse [Genius Laser Mouse] on usb-0000:00:1d.1-1/input0 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: setting latency timer to 64 PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: setting latency timer to 64 PM: Preallocating image memory... done (allocated 302355 pages) PM: Allocated 1209420 kbytes in 0.31 seconds (3901.35 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled PM: freeze of devices complete after 19.946 msecs PM: late freeze of devices complete after 0.718 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 182261 pages PM: Normal pages needed: 37741 + 1024, available pages: 195247 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) PM: early restore of devices complete after 0.999 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb1: root hub lost power or was reset pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 usb 1-7: reset high speed USB device number 16 using ehci_hcd firewire_core: rediscovered device fw0 usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain usb 3-1: reset low speed USB device number 3 using uhci_hcd usb 1-7.1: reset low speed USB device number 17 using ehci_hcd PM: restore of devices complete after 1864.747 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy15: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy15::radio Registered led device: rt73usb-phy15::assoc Registered led device: rt73usb-phy15::quality PM: Image restored successfully. Restarting tasks ... done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy16: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy16::radio Registered led device: rt73usb-phy16::assoc Registered led device: rt73usb-phy16::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb 1-7: USB disconnect, device number 16 usb 1-7.1: USB disconnect, device number 17 usb 1-7: new high speed USB device number 19 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 20 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input25 generic-usb 0003:05D5:6782.0011: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input26 generic-usb 0003:05D5:6782.0012: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk snd_hda_intel 0000:00:1b.0: PCI INT A disabled ata_piix 0000:00:1f.2: PCI INT B disabled PM: suspend of devices complete after 1021.590 msecs PM: late suspend of devices complete after 11.223 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xffd80000) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80618051) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80408030) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x2020b) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80218011) pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xffb0ff30, writing 0x80008000) 8139too 0000:03:04.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002800) 8139too 0000:03:04.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801) 8139too 0000:03:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) 8139too 0000:03:04.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) firewire_ohci 0000:03:06.0: restoring config space at offset 0xf (was 0x100, writing 0x105) firewire_ohci 0000:03:06.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x4 (was 0x0, writing 0x80000000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2180017) pci 0000:03:06.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.2: restoring config space at offset 0x4 (was 0x0, writing 0x80002900) pci 0000:03:06.2: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) pci 0000:03:06.3: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.3: restoring config space at offset 0x4 (was 0x0, writing 0x80001000) pci 0000:03:06.3: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x4100000, writing 0x84100002) PM: early resume of devices complete after 1.110 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 3 using uhci_hcd ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/33 ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 PM: resume of devices complete after 2627.098 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy17: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy17::radio Registered led device: rt73usb-phy17::assoc Registered led device: rt73usb-phy17::quality PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy18: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy18::radio Registered led device: rt73usb-phy18::assoc Registered led device: rt73usb-phy18::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated usb 1-7: USB disconnect, device number 19 usb 1-7.1: USB disconnect, device number 20 generic-usb 0003:05D5:6782.0011: can't reset device, 0000:00:1d.7-7.1/input0, status -71 usb 1-7: clear tt 1 (0140) error -19 generic-usb 0003:05D5:6782.0012: can't reset device, 0000:00:1d.7-7.1/input1, status -71 usb 1-7: clear tt 1 (0140) error -19 usb 1-7: new high speed USB device number 21 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 22 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input27 generic-usb 0003:05D5:6782.0013: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input28 generic-usb 0003:05D5:6782.0014: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 302355 pages) PM: Allocated 1209420 kbytes in 0.67 seconds (1805.10 MB/s) Suspending console(s) (use no_console_suspend to debug) snd_hda_intel 0000:00:1b.0: PCI INT A disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled PM: freeze of devices complete after 208.794 msecs PM: late freeze of devices complete after 0.748 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 179326 pages PM: Normal pages needed: 42339 + 1024, available pages: 184839 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x84100002, writing 0x4100002) PM: early restore of devices complete after 1.009 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb1: root hub lost power or was reset pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 usb 1-2: reset high speed USB device number 2 using ehci_hcd firewire_core: rediscovered device fw0 rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain usb 3-1: reset low speed USB device number 3 using uhci_hcd PM: restore of devices complete after 1145.627 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy19: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy19::radio Registered led device: rt73usb-phy19::assoc Registered led device: rt73usb-phy19::quality PM: Image restored successfully. Restarting tasks ... usb 1-7: USB disconnect, device number 21 usb 1-7.1: USB disconnect, device number 22 done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy20: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy20::radio Registered led device: rt73usb-phy20::assoc Registered led device: rt73usb-phy20::quality usbcore: registered new interface driver rt73usb usb 1-7: new high speed USB device number 23 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 24 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input29 generic-usb 0003:05D5:6782.0015: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input30 generic-usb 0003:05D5:6782.0016: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 302355 pages) PM: Allocated 1209420 kbytes in 0.46 seconds (2629.17 MB/s) Suspending console(s) (use no_console_suspend to debug) snd_hda_intel 0000:00:1b.0: PCI INT A disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled PM: freeze of devices complete after 208.050 msecs PM: late freeze of devices complete after 0.762 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 163178 pages PM: Normal pages needed: 26775 + 1024, available pages: 200403 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) PM: early restore of devices complete after 1.005 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb2: root hub lost power or was reset usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb4: root hub lost power or was reset usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 usb usb1: root hub lost power or was reset ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported firewire_core: skipped bus generations, destroying all nodes ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 usb 1-7: reset high speed USB device number 23 using ehci_hcd firewire_core: rediscovered device fw0 usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain usb 3-1: reset low speed USB device number 3 using uhci_hcd usb 1-7.1: reset low speed USB device number 24 using ehci_hcd PM: restore of devices complete after 2466.114 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy21: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy21::radio Registered led device: rt73usb-phy21::assoc Registered led device: rt73usb-phy21::quality PM: Image restored successfully. Restarting tasks ... done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy22: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy22::radio Registered led device: rt73usb-phy22::assoc Registered led device: rt73usb-phy22::quality usbcore: registered new interface driver rt73usb usb 1-7: USB disconnect, device number 23 usb 1-7.1: USB disconnect, device number 24 generic-usb 0003:05D5:6782.0015: can't reset device, 0000:00:1d.7-7.1/input0, status -71 usb 1-7: clear tt 1 (0180) error -19 wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated usb 1-7: new high speed USB device number 25 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 26 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input31 generic-usb 0003:05D5:6782.0017: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input32 generic-usb 0003:05D5:6782.0018: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 302343 pages) PM: Allocated 1209372 kbytes in 0.34 seconds (3556.97 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled PM: freeze of devices complete after 432.779 msecs PM: late freeze of devices complete after 0.729 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 195216 pages PM: Normal pages needed: 68343 + 1024, available pages: 199939 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) PM: early restore of devices complete after 1.002 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb2: root hub lost power or was reset usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb4: root hub lost power or was reset usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 usb usb1: root hub lost power or was reset ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported firewire_core: skipped bus generations, destroying all nodes ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 usb 1-7: reset high speed USB device number 25 using ehci_hcd firewire_core: rediscovered device fw0 usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain usb 3-1: reset low speed USB device number 3 using uhci_hcd usb 1-7.1: reset low speed USB device number 26 using ehci_hcd PM: restore of devices complete after 1861.732 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy23: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy23::radio Registered led device: rt73usb-phy23::assoc Registered led device: rt73usb-phy23::quality PM: Image restored successfully. Restarting tasks ... done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy24: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy24::radio Registered led device: rt73usb-phy24::assoc Registered led device: rt73usb-phy24::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated usb 1-7: USB disconnect, device number 25 usb 1-7.1: USB disconnect, device number 26 usb 1-7: new high speed USB device number 27 using ehci_hcd hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected usb 1-7.1: new low speed USB device number 28 using ehci_hcd input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.0/input/input33 generic-usb 0003:05D5:6782.0019: input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input0 input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1:1.1/input/input34 generic-usb 0003:05D5:6782.001A: input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:1d.7-7.1/input1 PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 302355 pages) PM: Allocated 1209420 kbytes in 0.63 seconds (1919.71 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ata_piix 0000:00:1f.2: PCI INT B disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled PM: freeze of devices complete after 332.169 msecs PM: late freeze of devices complete after 0.725 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 205089 pages PM: Normal pages needed: 80633 + 1024, available pages: 192483 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) PM: early restore of devices complete after 0.997 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb1: root hub lost power or was reset pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 3 using uhci_hcd usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain usb 1-7: reset high speed USB device number 27 using ehci_hcd usb 1-7.1: reset low speed USB device number 28 using ehci_hcd PM: restore of devices complete after 2066.890 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy25: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy25::radio Registered led device: rt73usb-phy25::assoc Registered led device: rt73usb-phy25::quality PM: Image restored successfully. Restarting tasks ... done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy26: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy26::radio Registered led device: rt73usb-phy26::assoc Registered led device: rt73usb-phy26::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated generic-usb 0003:05D5:6782.0019: can't reset device, 0000:00:1d.7-7.1/input0, status -32 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk snd_hda_intel 0000:00:1b.0: PCI INT A disabled ata_piix 0000:00:1f.2: PCI INT B disabled PM: suspend of devices complete after 1019.605 msecs PM: late suspend of devices complete after 11.219 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xffd80000) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80618051) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80408030) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x2020b) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80218011) pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xffb0ff30, writing 0x80008000) 8139too 0000:03:04.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002800) 8139too 0000:03:04.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801) 8139too 0000:03:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) 8139too 0000:03:04.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) firewire_ohci 0000:03:06.0: restoring config space at offset 0xf (was 0x100, writing 0x105) firewire_ohci 0000:03:06.0: restoring config space at offset 0x5 (was 0x0, writing 0x80002000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x4 (was 0x0, writing 0x80000000) firewire_ohci 0000:03:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2180017) pci 0000:03:06.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.2: restoring config space at offset 0x4 (was 0x0, writing 0x80002900) pci 0000:03:06.2: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002) pci 0000:03:06.3: restoring config space at offset 0xf (was 0x1ff, writing 0x105) pci 0000:03:06.3: restoring config space at offset 0x4 (was 0x0, writing 0x80001000) pci 0000:03:06.3: restoring config space at offset 0x3 (was 0x0, writing 0x4008) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x4100000, writing 0x84100002) PM: early resume of devices complete after 1.110 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk firewire_core: skipped bus generations, destroying all nodes usb 1-2: reset high speed USB device number 2 using ehci_hcd rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain firewire_core: rediscovered device fw0 usb 3-1: reset low speed USB device number 3 using uhci_hcd ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata2.00: configured for UDMA/33 ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata1.00: configured for UDMA/100 PM: resume of devices complete after 2682.332 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy27: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy27::radio Registered led device: rt73usb-phy27::assoc Registered led device: rt73usb-phy27::quality PM: Finishing wakeup. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy28: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy28::radio Registered led device: rt73usb-phy28::assoc Registered led device: rt73usb-phy28::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 302355 pages) PM: Allocated 1209420 kbytes in 0.27 seconds (4479.33 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache snd_hda_intel 0000:00:1b.0: PCI INT A disabled ata_piix 0000:00:1f.2: PCI INT B disabled PM: freeze of devices complete after 18.629 msecs PM: late freeze of devices complete after 0.733 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline PM: Creating hibernation image: PM: Need to copy 203781 pages PM: Normal pages needed: 79489 + 1024, available pages: 193955 PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations Switched to NOHz mode on CPU #1 CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005) firewire_ohci 0000:03:06.0: restoring config space at offset 0x1 (was 0x2100015, writing 0x2180017) pci 0000:03:06.3: restoring config space at offset 0x1 (was 0x84100002, writing 0x4100002) PM: early restore of devices complete after 0.999 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb1: root hub lost power or was reset pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 sd 0:0:0:0: [sda] Starting disk ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported firewire_core: skipped bus generations, destroying all nodes ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/100 ata2.00: configured for UDMA/33 usb 1-2: reset high speed USB device number 2 using ehci_hcd firewire_core: rediscovered device fw0 rt73usb 1-2:1.0: no reset_resume for driver rt73usb? wlan0: deauthenticating from 00:40:10:10:00:03 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: restore of devices complete after 690.835 msecs usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy29: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy29::radio Registered led device: rt73usb-phy29::assoc Registered led device: rt73usb-phy29::quality PM: Image restored successfully. Restarting tasks ... usb 3-1: USB disconnect, device number 3 usb 1-7: USB disconnect, device number 27 usb 1-7.1: USB disconnect, device number 28 done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state usbcore: deregistering interface driver rt73usb usb 1-2: reset high speed USB device number 2 using ehci_hcd ieee80211 phy30: Selected rate control algorithm 'minstrel_ht' Registered led device: rt73usb-phy30::radio Registered led device: rt73usb-phy30::assoc Registered led device: rt73usb-phy30::quality usbcore: registered new interface driver rt73usb wlan0: authenticate with 00:40:10:10:00:03 (try 1) wlan0: authenticated wlan0: associate with 00:40:10:10:00:03 (try 1) wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1) wlan0: associated oosplash.bin[2255]: segfault at 4d0 ip b7776a1b sp bf898a60 error 4 in libX11.so.6.3.0[b7743000+132000]