| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201111020322.46469.arnd@arndb.de>
Date: Wed, 2 Nov 2011 03:22:46 +0100
From: Arnd Bergmann <arnd@...db.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [GIT PULL 0/13 (12)] arm-soc updates
Hi Linus,
I have a series of 12 pull requests for the arm-soc tree, a total of 409
non-merge commits. Feel free to pull either the for-linus branch that contains
the lot with all conflicts resolved or the individual pull requests.
Basically all of this was in linux-next before the merge window, but
I had to wait for some dependencies to go in first and did not get around
to make sure that it still works fine during LinuxCon. While each branch
should be bisectable now you can pull them independently, I sometimes had
to pull in stuff from the earlier series into the later ones to resolve
conflicts between them.
There were also some excessive conflicts with branches that you have already
pulled during the last week, so I pulled in those branches where
applicable. The remaining conflicts that you see are typically ones that
are easy to resolve and are caused by more obscure patches already upstream.
The two last series (next/dt and next/soc) had to be rebased on short notice
because they were originally based on an older version of the arm tree that
was not meant to be used as a base and got changed. You might want to hold
off on those in order to give them slightly more exposure in linux-next.
If you do that, I will resubmit them by the end of this week.
My original plan was to send another big cleanup and feature submission
for the samsung subarchitectures along with the ones in these series,
but it turned out that they depend on other patches in the dmaengine
tree that you have not yet pulled. Consequently, I ended up with only
12 pull requests instead of the 13 I planned earlier. If you want to take
a look, the remaining patches are in the for-next branch of the same tree.
I'll send them as soon as the dmaengine tree shows up in mainline.
Arnd
The following changes since commit 094803e0aab3fe75bbf8202a8f4b5280eaade375:
Merge branch 'akpm' (Andrew's incoming) (2011-10-31 17:46:07 -0700)
are available in the git repository at:
git://git.linaro.org/people/arnd/arm-soc.git for-linus
Abhilash Kesavan (1):
ARM: S5PV210: Remove unnecessary symbol for PM
Ajay Kumar (1):
ARM: SAMSUNG: Fix mask value for S5P64X0 CPU IDs
Arnaud Patard (8):
imx51: add pata device
imx51: add pata clock
imx: efika: Enable pata.
MX5: fix clock usage
Fix pata imx resource
efika: Configure esdhc cd/wp on efika mx/sb
ARM: mx5: fix clock usage for suspend
ARM: mx5: fix clock usage for suspend
Arnd Bergmann (85):
Merge branches 'imx/cleanup' and 'stericsson/cleanup' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/cleanup
Merge branches 'tegra/board' and 'at91/board' into next/board
Merge branch 'omap/cleanup' into next/cleanup
Merge branch 'samsung/cleanup' into next/cleanup
Merge branch 'samsung/board' into next/board
Merge branch 'stericsson/cleanup' into next/cleanup
Merge branch 'davinci/cleanup' into next/cleanup
Merge branch 'tegra/fixes' into next/fixes
Merge branch 'for_3.2/voltage-cleanup' of git://gitorious.org/khilman/linux-omap-pm into omap/voltage
Merge branch 'ixp/board' into next/board
Merge branch 'omap/cleanup' into next/cleanup
ARM: omap: use __devexit_p in dmtimer driver
Merge branch 'samsung/board' into next/board
Merge branch 'omap/fixes' into fixes
Merge branch 'imx/cleanup' into next/cleanup
Merge branch 'imx/cleanup' into imx/devel
Merge branches 'sirf/devel', 'at91/devel', 'imx/devel' and 'davinci/devel' into next/devel
Merge branch 'sirf/cleanup' into next/cleanup
ARM: pxa: make zylonite_pxa*_init declaration match code
ARM: pxa: export symbols from pxa3xx-ulpi
ARM: pxa: allow selecting just one of TREO680/CENTRO
ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
ARM: pxa: pxa95x is incompatible with earlier pxa
ARM: pxa: select POWER_SUPPLY on raumfeld
ARM: pxa: centro and treo680 need palm27x
ARM: pxa: sharpsl pm needs SPI
ARM: pxa: use correct __iomem annotations
Merge branch 'depends/rmk/devel-stable' into next/cleanup
Merge branch 'imx/fixes' into next/fixes
Merge branch 'stericsson/fixes' into next/cleanup
Merge branch 'fixes' into next/fixes
Merge branch 'ep93xx/board' into next/board
Merge branch 'tegra/cleanup' into next/cleanup
Merge branch 'imx-features-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 into imx/devel
Merge branches 'imx/pata' and 'imx/sata' into next/driver
Merge branch 'imx/board' into next/board
Merge branch 'imx/devel' into next/devel
Merge branches 'cross-platform/debug_ll' and 'cross-platform/cpu-mapping' into next/cross-platform
Merge branch 'depends/rmk/debug' into tmp
Merge branch 'depends/rmk/smp' into tmp
Merge branch 'tegra/devel' into next/devel
Merge branch 'at91/trng' into next/driver
Merge branch 'imx-cleanups-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 into imx/cleanup
Merge branch 'imx/cleanup' into next/cleanup
Merge branch 'depends/rmk/gpio' into next/board
Merge branch 'imx/fixes' into next/fixes
Merge branch 'pxa/fixes' into next/fixes
Merge branches 'msm/dt', 'imx/dt' and 'at91/dt' into next/dt
Merge branches 'depends/rmk/io', 'depends/rmk/l2x0' and 'depends/rmk/gpio' into highbank/soc
Merge branch 'omap/voltage' into next/pm
Merge branches 'stericsson/timer' and 'omap/dmtimer' into next/timer
Merge branch 'omap/dt' into next/dt
Merge branch 'dt/gic' into next/dt
Merge branch 'depends/rmk/debug' into highbank/soc
Merge branch 'dt/gic' into highbank/soc
Merge branch 'depends/rmk/devel-stable' into imx/imx6q
Merge branch 'dt/gic' into imx/imx6q
Merge branch 'imx/devel' into imx/imx6q
Merge branch 'cross-platform/debug_ll' into imx/imx6q
Merge branch 'depends/rmk/gpio' into next/fixes
Merge branch 'depends/rmk/memory_h' into next/fixes
Merge branch 'depends/omap2_dss' into next/cleanup
Merge branch 'next/fixes' into next/cleanup
Merge branch 'stericsson/cleanup' into next/timer
Merge branch 'depends/rmk/gpio' into next/devel
Merge branch 'depends/rmk/devel-stable' into next/board
Merge branch 'depends/rmk/memory_h' into next/fixes
ARM: gic: use module.h instead of export.h
Merge branch 'next/fixes' into for-next
Merge branch 'next/cleanup' into for-next
Merge branch 'next/driver' into for-next
Merge branch 'next/timer' into for-next
Merge branch 'next/pm' into for-next
Merge branch 'next/deletion' into for-next
Merge branch 'next/devel' into for-next
Merge branch 'next/board' into for-next
Merge branch 'next/cross-platform' into for-next
Merge branch 'depends/rmk/memory_h' into next/cleanup2
Merge branch 'next/cleanup2' into for-linus
Merge branch 'imx/devel' into next/dt
Merge branch 'next/dt' into for-linus
Merge branch 'highbank/soc' into next/soc
Merge branch 'picoxcell/soc' into next/soc
Merge branch 'imx/imx6q' into next/soc
Merge branch 'next/soc' into for-linus
Axel Lin (1):
ARM: pxa/cm-x300: properly set bt_reset pin
Banajit Goswami (1):
ARM: SAMSUNG: Consolidate common function to set SDHCI plat data
Barry Song (13):
ARM: mach-ux500: add explicit cpu_relax() for busy wait loop
ARM: CSR: add lost Resource Sharing Control(RSC) node in dts
ARM: CSR: extend the compatibility of gpio controller to pinmux in dts
ARM: CSR: IRQ: add simple irq_domain so that hw irq can map to Linux
ARM: CSR: PM: save/restore timer status in suspend cycle
ARM: CSR: PM: save/restore irq status in suspend cycle
ARM: CSR: timer: do not initialise statics to 0 or NULL
ARM: CSR: timer: space required before the open parenthesis '('
ARM: CSR: prima2: fix trailing whitespace
ARM: CSR: clock: Fix indentation
Merge branch 'l2x0' of rmk tree into prima2-l2x0
ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII
ARM: CSR: PM: use outer_resume to resume L2 cache
Benoit Cousson (20):
OMAP4: powerdomain data: add voltage domains
ARM: OMAP2+: Add SoC specific map_io functions
ARM: OMAP3: beagle-board: Use the omap_hwmod_name_get_dev API
ARM: OMAP2+: pm: Use hwmod name instead of dev pointer
ARM: OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PM
ARM: OMAP: omap_device: Create a default omap_device_pm_latency
ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures
of: Add helpers to get one string in multiple strings property
ARM: OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
ARM: OMAP: omap_device: Add a method to build an omap_device from a DT node
arm/dts: Add initial device tree support for OMAP4 SoC
arm/dts: Add support for OMAP4 PandaBoard
arm/dts: Add support for OMAP4 SDP board
arm/dts: Add initial device tree support for OMAP3 SoC
arm/dts: Add support for OMAP3 Beagle board
ARM: OMAP2+: board-generic: Add DT support to generic board
ARM: OMAP2+: board-generic: Add i2c static init
ARM: OMAP2+: l3-noc: Add support for device-tree
arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver
arm/dts: OMAP3+: Add mpu, dsp and iva nodes
Bjarne Steinsbo (1):
ARM: OMAP4: Keyboard: Fix section mismatch in the board file
Changhwan Youn (7):
ARM: EXYNOS4: Add support PPI in external GIC
ARM: EXYNOS4: Add support MCT PPI for EXYNOS4212
ARM: EXYNOS4: Add support new EXYNOS4412 SoC
ARM: EXYNOS4: Add support clock for EXYNOS4412
ARM: EXYNOS4: Add functions for gic interrupt handling
ARM: EXYNOS4: Add MCT support for EXYNOS4412
ARM: EXYNOS4: Add support SMDK4412 Board
David Brown (3):
msm_serial: Use relative resources for iomem
msm_serial: Add devicetree support
ARM: msm: Add devicetree support for msm8660-surf
Dong Aisheng (5):
ARM: mxs: add saif clock
ARM: mxs: add saif device
ARM: mxs: add sgtl5000 i2c device
ARM: mxs: add mxs-sgtl5000 device
ARM: mxs: correct the using of frac div for saif
Eric Miao (5):
ARM: pxa: fix building error by palm27x_lcd_init() when FB_PXA not defined
ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available
ARM: pxa: pxa95x/saarb depends on pxa3xx code
ARM: pxa: make pxafb_smart_*() empty when not enabled
ARM: mmp: rename SHEEVAD to GPLUGD
Fabio Estevam (13):
ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices
ARM: mxs: Remove unused header file
ARM: imx: pwm: Add support for MX53
ARM: imx: Add PATA resources for other i.MX processors
ARM: imx: Add PATA clock support
ARM: imx: Define functions for registering PATA
ARM: mx53_loco: Add support for the accelerometer
ARM: imx: Introduce generic function for displaying silicon revision
ARM: mach-imx/mx25_3ds: Add FlexCAN support
ARM: mx31pdk: Fix build by passing IMX_HAVE_PLATFORM_MXC_MMC
ARM: mach-qong: Add watchdog support
ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded
ARM: mxs: Consolidate mm-mx23.c and mm-mx28.c into a single file
Fredrik Svensson (1):
mach-ux500: remove pull-pinconfig and add SPI2
Grazvydas Ignotas (1):
OMAP: omap_device: make latency autoadjust messages debug
Hartley Sweeten (1):
ep93xx: add support Vision EP9307 SoM
Heiko Stuebner (2):
ARM: S3C24XX: Remove hw_addr from s3c24xx dma channel declarations
ARM: S3C24XX: Remove s3c24xx_dma_addr definition
Hui Wang (1):
ARM i.MX avic: convert to use generic irq chip
Ido Yariv (5):
ARM: davinci: DA850: Add MMC/SD1 pinmux configuration
ARM: davinci: DA850: Add GPIO pinmux configuration for wl1271
mmc: davinci: Add support for set_power callback
ARM: davinci: AM18x: Add wl1271/wlan support
ARM: davinci: Explicitly set channel controllers' default queues
Jamie Iles (5):
picoxcell: support for Picochip picoxcell devices
picoxcell: add the DTS for pc3x2 and pc3x3 devices
picoxcell: add the DTS for the PC7302 board
picoxcell: remove custom ioremap implementation
picoxcell: add a definition of VMALLOC_END
Jarkko Nikula (14):
omap: mcbsp: Remove omap device API
ARM: OMAP: mcbsp: Remove unused variables from platform data
ARM: OMAP: mcbsp: Move out omap_mcbsp_register_board_cfg from plat-omap/devices.c
ARM: OMAP: mcbsp: Implement generic register access
ARM: OMAP: mcbsp: Make wakeup control generic
ARM: OMAP: mcbsp: Make tranceiver configuration control register access generic
ARM: OMAP: mcbsp: Make threshold based transfer code generic
ARM: OMAP: mcbsp: Use per instance register cache size
ARM: OMAP: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c
ARM: OMAP: mcbsp: Cleanup sidetone control initialization and make it generic
ARM: OMAP: mcbsp: Update mcbsp.h include dependencies
ARM: OMAP: mcbsp: Move address definitions to arch/arm/mach-omap1/mcbsp.c
ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src
ARM: OMAP: mcbsp: Start generalize signal muxing functions
Jason Liu (11):
imx5: not include the unused head file
ARM: mx25: Print silicon revision on boot
ARM: mx27: Print silicon revision on boot
ARM: mx31: use generic function for displaying silicon revision
ARM: mx35: use generic function for displaying silicon revision
ARM: mx5: use generic function for displaying silicon revision
ARM: i.MX: initialize l2x0 at early_init time
ARM: mx5/mm: move i.MX50 mm stuff into mm.c
ARM: mx5/mm: Remove MX51_DEBUG related mapping
ARM: mx5/mm: consolidate TZIC map code
ARM: mx25: Add the missing IIM base definition
Jean-Christophe PLAGNIOL-VILLARD (3):
at91: USB-A9G20 C01 & C11 board support
at91: ohci-at91: always provide all the clocks
ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
JeongHyeon Kim (1):
ARM: EXYNOS4: Add support for ORIGEN board
Johan Hovold (2):
OMAP2+: PM: fix typos in misc. comment and error messages
OMAP2+: PM: clean up error messages: replace printk with pr_err.
Jonas Aaberg (4):
ARM: ux500: Move timer code to separate file
ARM: plat-nomadik: timer: Add support for periodic timers
ARM: plat-nomadik: timer: Export reset functions
ARM: ux500: Reprogram timers upon resume
Jonghwan Choi (2):
ARM: S5P: Remove duplicate kdiv calculation
ARM: EXYNOS4: Add support PM for EXYNOS4212
Josef Holzmayr (1):
at91: add support for RSIs EWS board
Kevin Hilman (57):
OMAP2+: hwmod: remove unused voltagedomain pointer
OMAP2+: voltage: move PRCM mod offets into VC/VP structures
OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain
OMAP2+: voltage: start towards a new voltagedomain layer
OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva"
OMAP3: voltagedomain data: add wakeup domain
OMAP3+: voltage: add scalable flag to voltagedomain
OMAP2+: powerdomain: add voltagedomain to struct powerdomain
OMAP2: add voltage domains and connect to powerdomains
OMAP3: powerdomain data: add voltage domains
OMAP2+: powerdomain: add voltage domain lookup during register
OMAP2+: voltage: keep track of powerdomains in each voltagedomain
OMAP2+: voltage: split voltage controller (VC) code into dedicated layer
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames
OMAP2+: voltage: enable VC bypass scale method when VC is initialized
OMAP2+: voltage: split out voltage processor (VP) code into new layer
OMAP2+: VC: support PMICs with separate voltage and command registers
OMAP2+: add PRM VP functions for checking/clearing VP TX done status
OMAP3+ VP: replace transaction done check/clear with VP ops
OMAP2+: PRM: add register access functions for VC/VP
OMAP3+: voltage: convert to PRM register access functions
OMAP3+: VC: cleanup i2c slave address configuration
OMAP3+: VC: cleanup PMIC register address configuration
OMAP3+: VC bypass: use fields from VC struct instead of PMIC info
OMAP3+: VC: cleanup voltage setup time configuration
OMAP3+: VC: move on/onlp/ret/off command configuration into common init
OMAP3+: VC: abstract out channel configuration
OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain
OMAP3+: VC: make I2C config programmable with PMIC-specific settings
OMAP3+: PM: VC: handle mutant channel config for OMAP4 MPU channel
OMAP3+: VC: use last nominal voltage setting to get current_vsel
OMAP3+: VP: cleanup: move VP instance into voltdm, misc. renames
OMAP3+: voltage: remove unneeded debugfs interface
OMAP3+: VP: struct omap_vp_common: replace shift with __ffs(mask)
OMAP3+: VP: move SoC-specific sys clock rate retreival late init
OMAP3+: VP: move timing calculation/config into VP init
OMAP3+: VP: create VP helper function for updating error gain
OMAP3+: VP: remove omap_vp_runtime_data
OMAP3+: VP: move voltage scale function pointer into struct voltagedomain
OMAP3+: VP: update_errorgain(): return error if VP
OMAP3+: VP: remove unused omap_vp_get_curr_volt()
OMAP3+: VP: combine setting init voltage into common function
OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix
OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain
OMAP3+: voltdm: final removal of omap_vdd_info
OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage
OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale
OMAP2+: VC: more registers are per-channel starting with OMAP5
OMAP: omap_device: replace debug/warning/error prints with dev_* macros
OMAP: omap_device: remove internal functions from omap_device.h
OMAP: omap_device: when building return platform_device instead of omap_device
OMAP: omap_device: device register functions now take platform_device pointer
OMAP: omap_device: _disable_idle_on_suspend() takes platform_device pointer
OMAP: omap_device: decouple platform_device from omap_device
OMAP3: PM: fix UART handling when using no_console_suspend
ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=n
ARM: 7082/1: platform_device: pdev_archdata: add omap_device pointer
Kukjin Kim (16):
ARM: EXYNOS4: Turn the mach-smdkc210.c into mach-smdv310.c
ARM: SAMSUNG: Add support for detecting CPU at runtime
ARM: S5P64X0: Use soc_is_s5p64x0() to distinguish cpu at runtime
ARM: SAMSUNG: Add support for handling of cpu revision
ARM: EXYNOS4: Use samsung_rev() to distinguish silicon revision
Merge branch 'next/topic-cleanup-dma' into next-samsung-cleanup
ARM: S3C24XX: remove unused gpio codes
Merge branch 'next/topic-cleanup-smdkv310' into next-samsung-cleanup
Merge branch 'next/topic-cpuid-rev' into next/topic-add-exynos4212
Merge branch 'next/topic-cleanup-smdkv310' into next/topic-add-exynos4212
ARM: EXYNOS4: Add support new EXYNOS4212 SoC
ARM: EXYNOS4: Add support clock for EXYNOS4212
ARM: EXYNOS4: Add support SMDK4212 Board
Merge branch 'next-samsung-board-v3.1' into next-samsung-board
ARM: SAMSUNG: Move map header file into plat-samsung
Merge branch 'next/topic-plat-samsung-1' into next-samsung-cleanup
Lauri Hintsala (1):
ARM: mach-mxs: fix machines' initializers order
Lee Jones (1):
mach-ux500: remove most of the ugly machine_is_*() calls
Linus Walleij (8):
mach-u300: retire odd singlemem variant
mach-u300: drop SEMI config option
mach-u300: patch physoffset by default
mach-u300: delete bogus memory mappings
mach-u300: retire AVE device
mach-ux500: factor out l2x0 handling code
ARM: mach-ux500: unlock I&D l2x0 caches before init
clocksource: fixup ux500 build problems
Marc Dietrich (5):
ARM: tegra: paz00: add support serial port on JP1
ARM: tegra: paz00: enable rfkill for internal wifi card
ARM: tegra: paz00: enable wifi led
ARM: tegra: paz00: reorder the SDHCI channel init
ARM: tegra: paz00: add clocks required for usb operation
Mark Brown (2):
ARM: SAMSUNG: Fix mask for S3C64xx CPU IDs
ARM: S3C64XX: Remove unused CPU devices for Cragganmore
Martin Bogomolni (1):
ARM: highbank: Add cpu hotplug support
Matt Burtch (1):
ARM: i.MX28: shift frac value in _CLK_SET_RATE
Mattias Wallin (3):
ARM: plat-nomadik: MTU sched_clock as an option
clocksource: add DBX500 PRCMU Timer support
ARM: ux500: add support for clocksource DBX500 PRCMU
Michael Jones (1):
OMAP2: PM debug: remove leftover debug code
Naveen Krishna Chatradhi (1):
ARM: SAMSUNG: Remove unnecessary duplication of plat_data on TSADC
Nico Erfurth (1):
at91: merge board USB-A9260 and USB-A9263 together
Nicolas Ferre (3):
ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig
ARM: at91: add defconfig for at91sam9g45 family
ARM: at91: dt: at91sam9g45 family and board device tree files
Nicolas Pitre (1):
ARM: mach-nuc93x: delete
Nishanth Menon (4):
OMAP4: PM: TWL6030: fix uv to voltage for >0x39
OMAP4: PM: TWL6030: address 0V conversions
OMAP4: PM: TWL6030: add cmd register
ARM: OMAP: omap_device: Add omap_device_get_by_hwmod_name
Olof Johansson (16):
ARM: tegra: annotate IO_*_VIRT pointers
ARM: tegra: timer: don't cast __iomem pointers
ARM: tegra: tegra2_clocks: don't cast __iomem pointers
ARM: tegra: tegra2_clocks: 0 -> NULL changes
ARM: tegra: pcie: don't cast __iomem pointers
ARM: tegra: pcie: include board.h
ARM: tegra: pcie: 0 -> NULL changes
ARM: tegra: tegra_init_cache should be static
ARM: tegra: tegra_rtc_read_ms should be static
ARM: tegra: tegra_powergate_is_powered should be static
ARM: tegra: tegra2_clocks: don't export some tables
ARM: tegra: dma: staticify some tables and functions
ARM: tegra: cpu-tegra: sparse type fix
ARM: tegra: cpu-tegra: unexport two functions
ARM: tegra: devices.c should include devices.h
ARM: tegra: update defconfig
Patrick Titiano (2):
OMAP4: PM: TWL6030: fix voltage conversion formula
OMAP4: PM: TWL6030: fix ON/RET/OFF voltages
Paul Bolle (1):
ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
Paul Fertser (1):
plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Paul Walmsley (12):
OMAP3: id: remove identification codes that only correspond to marketing names
OMAP3: id: remove useless strcpy()s
OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levels
OMAP3: id: add fallthrough warning; fix some CodingStyle issues
OMAP3: id: remove duplicate code for testing SoC ES level
OMAP2+: id: remove OMAP_REVBITS_* macros
OMAP: clockdomain: split clkdm_init()
OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain
OMAP: powerdomain: split pwrdm_init() into two functions
OMAP: powerdomain: remove omap_chip bitmasks
OMAP2+: hwmod: remove OMAP_CHIP*
OMAP: id: remove OMAP_CHIP declarations, code
Peter De Schrijver (3):
arm/tegra: prepare Seaboard pinmux code for derived boards
arm/tegra: add support for ventana pinmuxing
arm/tegra: device tree support for ventana board
Peter Korsgaard (2):
ARM: at91: at91sam9g45: add trng clock and platform device
hw_random: add driver for atmel true hardware random number generator
Philippe Rétornaz (1):
mx31moboard: Add poweroff support
Richard Cochran (1):
ixp4xx: support omicron ixp425 based boards
Richard Zhu (4):
AHCI Add the AHCI SATA feature on the MX53 platforms
MX53 Enable the AHCI SATA on MX53 ARD board
MX53 Enable the AHCI SATA on MX53 LOCO board
MX53 Enable the AHCI SATA on MX53 SMD board
Rob Herring (12):
Merge remote-tracking branch 'rmk/devel-stable' into HEAD
of/irq: introduce of_irq_init
irq: support domains with non-zero hwirq base
ARM: gic: add irq_domain support
ARM: gic: add OF based initialization
ARM: gic: fix irq_alloc_descs handling for sparse irq
ARM: l2x0: add empty l2x0_of_init
ARM: highbank: add devicetree source
ARM: add Highbank core platform support
MAINTAINERS: add Calxeda Highbank ARM platform
ARM: highbank: add SMP support
ARM: highbank: add suspend support
Rongjun Ying (1):
ARM: CSR: PM: add sleep entry for SiRFprimaII
Santosh Shilimkar (1):
OMAP4: Fix the emif and dmm virtual mapping
Sascha Hauer (20):
Merge branch 'imx-cleanup' of git://git.pengutronix.de/git/ukl/linux-2.6 into imx-cleanup
ARM i.MX: allow to compile together ARMv4 and ARMv5 based SoCs
ARM i.MX: allow to compile together all i.MX5 based SoCs
ARM i.MX5: update defconfig
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs
ARM i.MX audmux v2: remove unnecessary ifdefs
ARM i.MX: remove ARCH_MX* macros from Makefile
Merge branches 'cleanups/assorted', 'cleanups/shawn-cleanup-mxc-gpio', 'cleanups/troy-cleanup-iomux-v3' and 'cleanups/ukl-mx5-dynamically-allocate-devices' into imx-cleanups-for-arnd
Merge branches 'features/assorted', 'features/imx-cpurev', 'features/imx-pata', 'features/multisoc' and 'features/mxs' into imx-features-for-arnd
Merge branches 'cleanups/assorted' and 'cleanups/mm-tzic' into imx-cleanup
ARM i.MX avic: add handle_irq function
ARM i.MX tzic: add handle_irq function
ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER
ARM i.MX entry-macro.S: remove now unused code
Merge branches 'features/assorted', 'features/imx-pata' and 'features/imx-multi-irq-v2' into imx-features
Merge branches 'cleanups/mx3-mm-v2' and 'cleanups/mxs' into imx-cleanup
Merge branch 'features/ahci' into for-arnd-features
Merge branch 'features/denx-mx28' into for-arnd-features
Merge branches 'cleanups/mxs', 'cleanups/mx3-defconfig' and 'cleanups/includes' into imx-cleanups-for-arnd
arm/imx: merge i.MX3 and i.MX6
Shawn Guo (28):
arm/mxc: do not use gpio_to_irq() for static initializers
gpio/mxc: add .to_irq for gpio chip
arm/mxc: use gpiolib helper for gpio_to_irq
gpio/mxc: move irq_to_gpio() into gpio-mxc driver
arm/mxc: move IMX_GPIO_NR into mach/hardware.h
gpio/mxs: move irq_to_gpio() into gpio-mxs driver
arm/mxs: move MXS_GPIO_NR into mach/mxs.h
arm/imx: merge mm-imx35.c into mm-imx31.c
arm/imx: rename mm-imx31.c to mm-imx3.c
arm/imx: change mxc_init_l2x0() to an imx31/35 specific call
arm/imx: remove cpu_is_xxx() from arch_idle()
arm/imx: remove cpu_is_xxx() check from __imx_ioremap()
arm/imx: use Kconfig choice for low-level debug UART selection
arm/imx: remove mx31_setup_weimcs() from mx31.h
arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c
arm/imx: remove mx27_setup_weimcs() from mx27.h
arm/imx: explicitly includes mach/hardware.h in pm-imx27.c
mmc: mxcmmc: explicitly includes mach/hardware.h
arm/mx5: add device tree support for imx53 boards
arm/mx5: add device tree support for imx51 babbage
arm/imx6q: add device tree source
arm/imx6q: add core definitions and low-level debug uart
arm/imx: add gic_handle_irq function
arm/imx6q: add core drivers clock, gpc, mmdc and src
arm/imx6q: add smp and cpu hotplug support
arm/imx6q: add device tree machine support
arm/imx6q: add suspend/resume support
MAINTAINERS: add ARM/FREESCALE IMX6 entry
Stefano Babic (1):
ARM: mxs: Add initial support for DENX MX28
Stephen Warren (11):
ARM: Tegra: Harmony: Add USB device
ARM: Tegra: Seaboard board updates for audio
ARM: Tegra: Seaboard: Add USB devices
ARM: Tegra: Force PORT_TEGRA as the UART type
arm/dt: Tegra: Add support-8bit to SDHCI nodes
arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
arm/dt: Tegra: Add pinmux node to tegra20.dtsi
arm/tegra: Convert pinmux driver to a platform device
gpio/tegra: Convert to a platform device
arm/tegra: pinmux: ioremap registers
arm/tegra: Harmony: Configure PMC for low-level interrupts
Tapani Utriainen (1):
ARM: OMAP: irq: loop counter fix in omap_init_irq()
Tarun Kanti DebBarma (8):
ARM: OMAP2+: dmtimer: add device names to flck nodes
ARM: OMAP1: dmtimer: conversion to platform devices
ARM: OMAP2+: dmtimer: convert to platform devices
ARM: OMAP: dmtimer: platform driver
ARM: OMAP: dmtimer: switch-over to platform device driver
ARM: OMAP: dmtimer: pm_runtime support
ARM: OMAP: dmtimer: low-power mode support
ARM: OMAP: dmtimer: add error handling to export APIs
Tero Kristo (1):
omap: voltage: add a stub header file for external/regulator use
Thomas Meyer (1):
ARM: davinci: edma: use kzalloc()
Thomas Petazzoni (3):
at91: ohci-at91: add vbus_pin_inverted platform attribute
at91: at91-ohci: support overcurrent notification
at91: at91-ohci: configure overcurrent pins as input GPIOs
Todd Poynor (3):
OMAP: VP: Explicitly mask VPVOLTAGE field
OMAP: Improve register access in L3 Error handler.
OMAP: Fix a BUG in l3 error handler.
Tony Lindgren (22):
omap2+: Use Kconfig symbol in Makefile instead of obj-y
ARM: OMAP: Move omap2_init_common_devices out of init_early
ARM: OMAP: Introduce SoC specific early_init
Merge branch 'omap_chip_remove_cleanup_3.2' of git://git.pwsan.com/linux-2.6 into cleanup
Merge branch 'for_3.2/voltage-cleanup' of git://gitorious.org/khilman/linux-omap-pm into voltage
ARM: OMAP: Add support for dmtimer v2 ip
ARM: OMAP2+: Fix missing inline functions for Makefile cleanup
ARM: OMAP: dmtimer: skip reserved timers
Merge branch 'for_3.2/omap_device' of git://gitorious.org/khilman/linux-omap-pm into cleanup
Merge branch 'for_3.2/pm-cleanup' of git://gitorious.org/khilman/linux-omap-pm into cleanup
Merge branch 'for_3.2/voltage-cleanup' of git://gitorious.org/khilman/linux-omap-pm into voltage
ARM: OMAP2+: Use SoC specifc map_io
ARM: OMAP2+: Remove custom init_irq for remaining boards
Merge branch 'for_3_2/omap_misc' of git://gitorious.org/omap-sw-develoment/linux-omap-dev into l3
Merge branches 'cleanup-part3', 'voltage', 'dmtimer' and 'l3' into dt-base
Merge branch 'for_3.2/3_omap_devicetree' of git://gitorious.org/omap-pm/linux into dt
ARM: OMAP1: Use generic map_io, init_early and init_irq
ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done
ARM: OMAP: Remove calls to SRAM allocations for framebuffer
ARM: OMAP: Map SRAM later on with ioremap_exec()
ARM: OMAP: Move set_globals initialization to happen in init_early
ARM: OMAP: Warn if omap_ioremap is called before SoC detection
Troy Kisky (3):
ARM: i.MX51: Remove _MX51_PAD_xxx references
ARM: i.MX51: clean up iomux-mx51.h
ARM: i.MX53: clean up iomux-mx53.h
Tushar Behera (1):
ARM: EXYNOS4: convert boot_params to atag_offset
Uwe Kleine-König (8):
ARM: mx5: fix remaining inconsistent names for irqs
ARM: mx5: remove unused #includes of devices.h
ARM: mx5: dynamically allocate mxc-ehci devices
ARM: mx5: dynamically allocate fsl-usb2-udc devices
ARM: mx5: dynamically allocate high speed i2c (imx-i2c actually)
ARM: imx/mx1ads: dynamically allocate physmap-flash device
ARM: imx/armadillo5x0: dynamically allocate physmap-flash device
ARM: mxc: drop now unused function mxc_register_device
Will Deacon (7):
ARM: exynos4: convert logical CPU numbers to physical numbers
ARM: msm: convert logical CPU numbers to physical numbers
ARM: shmobile: convert logical CPU numbers to physical numbers
ARM: ux500: convert logical CPU numbers to physical numbers
ARM: versatile: convert logical CPU numbers to physical numbers
ARM: plat-samsung: use Kconfig choice for debug UART selection
ARM: realview: use Kconfig choice for debug UART selection
Wolfram Sang (4):
arm: mxs: mx28evk: add fixed regulators for audio
arm: mach-mxs: add device for rtc
arm: mach-mxs: add rtc to all boards
arm: mx3: update defconfig
Zhiwu Song (1):
ARM: CSR: add rtc i/o bridge interface for SiRFprimaII
sricharan (3):
OMAP: Fix indentation issues in l3 error handler.
OMAP: Fix sparse warnings in l3 error handler.
OMAP: Print Initiator name for l3 custom error.
srinidhi kasagar (1):
ARM: mach-ux500: enable fix for ARM errata 754322
Documentation/devicetree/bindings/arm/calxeda.txt | 8 +
Documentation/devicetree/bindings/arm/fsl.txt | 26 +
Documentation/devicetree/bindings/arm/gic.txt | 55 +
Documentation/devicetree/bindings/arm/omap/dsp.txt | 14 +
Documentation/devicetree/bindings/arm/omap/iva.txt | 19 +
.../devicetree/bindings/arm/omap/l3-noc.txt | 19 +
Documentation/devicetree/bindings/arm/omap/mpu.txt | 27 +
.../devicetree/bindings/arm/omap/omap.txt | 43 +
.../devicetree/bindings/arm/picoxcell.txt | 24 +
.../devicetree/bindings/pinmux/pinmux_nvidia.txt | 5 +
.../devicetree/bindings/tty/serial/msm_serial.txt | 27 +
MAINTAINERS | 13 +
arch/arm/Kconfig | 49 +-
arch/arm/Kconfig.debug | 131 +-
arch/arm/Makefile | 9 +-
arch/arm/boot/dts/at91sam9g20.dtsi | 119 +
arch/arm/boot/dts/at91sam9g45.dtsi | 106 +
arch/arm/boot/dts/at91sam9m10g45ek.dts | 35 +
arch/arm/boot/dts/highbank.dts | 198 ++
arch/arm/boot/dts/imx51-babbage.dts | 135 +
arch/arm/boot/dts/imx51.dtsi | 246 ++
arch/arm/boot/dts/imx53-ard.dts | 113 +
arch/arm/boot/dts/imx53-evk.dts | 120 +
arch/arm/boot/dts/imx53-qsb.dts | 125 +
arch/arm/boot/dts/imx53-smd.dts | 169 +
arch/arm/boot/dts/imx53.dtsi | 301 ++
arch/arm/boot/dts/imx6q-sabreauto.dts | 62 +
arch/arm/boot/dts/imx6q.dtsi | 575 ++++
arch/arm/boot/dts/msm8660-surf.dts | 24 +
arch/arm/boot/dts/omap3-beagle.dts | 29 +
arch/arm/boot/dts/omap3.dtsi | 63 +
arch/arm/boot/dts/omap4-panda.dts | 29 +
arch/arm/boot/dts/omap4-sdp.dts | 29 +
arch/arm/boot/dts/omap4.dtsi | 103 +
arch/arm/boot/dts/picoxcell-pc3x2.dtsi | 249 ++
arch/arm/boot/dts/picoxcell-pc3x3.dtsi | 365 ++
arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts | 86 +
arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts | 92 +
arch/arm/boot/dts/prima2-cb.dts | 14 +-
arch/arm/boot/dts/tegra-harmony.dts | 1 +
arch/arm/boot/dts/tegra-seaboard.dts | 4 +
arch/arm/boot/dts/tegra-ventana.dts | 32 +
arch/arm/boot/dts/tegra20.dtsi | 8 +
arch/arm/boot/dts/usb_a9g20.dts | 30 +
arch/arm/common/Kconfig | 1 +
arch/arm/common/gic.c | 188 +-
arch/arm/configs/at91sam9g45_defconfig | 214 ++
arch/arm/configs/exynos4_defconfig | 1 +
.../{mx27_defconfig => imx_v4_v5_defconfig} | 68 +-
arch/arm/configs/mx1_defconfig | 91 -
arch/arm/configs/mx21_defconfig | 97 -
arch/arm/configs/mx3_defconfig | 46 +-
arch/arm/configs/{mx51_defconfig => mx5_defconfig} | 60 +-
arch/arm/configs/mxs_defconfig | 1 +
arch/arm/configs/tegra_defconfig | 39 +-
arch/arm/include/asm/device.h | 5 +
arch/arm/include/asm/hardware/cache-l2x0.h | 9 +-
arch/arm/include/asm/hardware/gic.h | 10 +-
arch/arm/include/asm/hardware/it8152.h | 2 +-
arch/arm/mach-at91/Kconfig | 24 +
arch/arm/mach-at91/Makefile | 9 +-
arch/arm/mach-at91/Makefile.boot | 2 +
arch/arm/mach-at91/at91cap9.c | 2 +
arch/arm/mach-at91/at91cap9_devices.c | 6 +
arch/arm/mach-at91/at91rm9200.c | 2 +
arch/arm/mach-at91/at91rm9200_devices.c | 8 +
arch/arm/mach-at91/at91sam9260.c | 10 +
arch/arm/mach-at91/at91sam9260_devices.c | 8 +
arch/arm/mach-at91/at91sam9261.c | 29 +-
arch/arm/mach-at91/at91sam9261_devices.c | 8 +
arch/arm/mach-at91/at91sam9263.c | 2 +
arch/arm/mach-at91/at91sam9263_devices.c | 6 +
arch/arm/mach-at91/at91sam9g45.c | 15 +
arch/arm/mach-at91/at91sam9g45_devices.c | 35 +
arch/arm/mach-at91/board-dt.c | 123 +
arch/arm/mach-at91/board-rsi-ews.c | 233 ++
arch/arm/mach-at91/board-usb-a9260.c | 230 --
arch/arm/mach-at91/board-usb-a9263.c | 246 --
arch/arm/mach-at91/board-usb-a926x.c | 383 +++
arch/arm/mach-at91/include/mach/board.h | 5 +
arch/arm/mach-at91/include/mach/timex.h | 5 +
arch/arm/mach-davinci/Kconfig | 10 +
arch/arm/mach-davinci/board-da850-evm.c | 114 +
arch/arm/mach-davinci/da850.c | 9 +
arch/arm/mach-davinci/devices-da8xx.c | 3 +
arch/arm/mach-davinci/devices-tnetv107x.c | 1 +
arch/arm/mach-davinci/dm355.c | 1 +
arch/arm/mach-davinci/dm644x.c | 1 +
arch/arm/mach-davinci/dm646x.c | 1 +
arch/arm/mach-davinci/dma.c | 5 +-
arch/arm/mach-davinci/include/mach/mmc.h | 3 +
arch/arm/mach-davinci/include/mach/mux.h | 10 +
arch/arm/mach-ep93xx/Kconfig | 7 +
arch/arm/mach-ep93xx/Makefile | 1 +
arch/arm/mach-ep93xx/vision_ep9307.c | 364 ++
arch/arm/mach-exynos4/Kconfig | 71 +-
arch/arm/mach-exynos4/Makefile | 12 +-
arch/arm/mach-exynos4/clock-exynos4210.c | 139 +
arch/arm/mach-exynos4/clock-exynos4212.c | 118 +
arch/arm/mach-exynos4/clock.c | 218 +-
arch/arm/mach-exynos4/cpu.c | 57 +-
arch/arm/mach-exynos4/hotplug.c | 2 +-
arch/arm/mach-exynos4/include/mach/entry-macro.S | 23 +-
arch/arm/mach-exynos4/include/mach/exynos4-clock.h | 43 +
arch/arm/mach-exynos4/include/mach/irqs.h | 2 +
arch/arm/mach-exynos4/include/mach/map.h | 4 +-
arch/arm/mach-exynos4/include/mach/regs-clock.h | 54 +-
arch/arm/mach-exynos4/include/mach/regs-mct.h | 5 +-
arch/arm/mach-exynos4/mach-origen.c | 108 +
arch/arm/mach-exynos4/mach-smdk4x12.c | 302 ++
arch/arm/mach-exynos4/mach-smdkc210.c | 309 --
arch/arm/mach-exynos4/mach-smdkv310.c | 78 +
arch/arm/mach-exynos4/mct.c | 165 +-
arch/arm/mach-exynos4/platsmp.c | 15 +-
arch/arm/mach-exynos4/pm.c | 79 +-
arch/arm/mach-highbank/Makefile | 6 +
arch/arm/mach-highbank/Makefile.boot | 1 +
arch/arm/mach-highbank/clock.c | 62 +
arch/arm/mach-highbank/core.h | 9 +
arch/arm/mach-highbank/highbank.c | 145 +
arch/arm/mach-highbank/hotplug.c | 56 +
arch/arm/mach-highbank/include/mach/debug-macro.S | 19 +
arch/arm/mach-highbank/include/mach/entry-macro.S | 7 +
arch/arm/mach-highbank/include/mach/gpio.h | 1 +
arch/arm/mach-highbank/include/mach/io.h | 7 +
arch/arm/mach-highbank/include/mach/irqs.h | 6 +
arch/arm/mach-highbank/include/mach/memory.h | 1 +
arch/arm/mach-highbank/include/mach/system.h | 26 +
arch/arm/mach-highbank/include/mach/timex.h | 6 +
arch/arm/mach-highbank/include/mach/uncompress.h | 9 +
arch/arm/mach-highbank/include/mach/vmalloc.h | 1 +
arch/arm/mach-highbank/lluart.c | 34 +
arch/arm/mach-highbank/localtimer.c | 40 +
arch/arm/mach-highbank/platsmp.c | 78 +
arch/arm/mach-highbank/pm.c | 55 +
arch/arm/mach-highbank/sysregs.h | 52 +
arch/arm/mach-highbank/system.c | 33 +
arch/arm/mach-imx/Kconfig | 83 +-
arch/arm/mach-imx/Makefile | 26 +-
arch/arm/mach-imx/Makefile.boot | 4 +
arch/arm/mach-imx/cache-l2x0.c | 56 -
arch/arm/mach-imx/clock-imx25.c | 6 +
arch/arm/mach-imx/clock-imx27.c | 6 +-
arch/arm/mach-imx/clock-imx31.c | 8 +-
arch/arm/mach-imx/clock-imx35.c | 7 +-
arch/arm/mach-imx/clock-imx6q.c | 2012 +++++++++++
arch/arm/mach-imx/cpu-imx25.c | 41 +
arch/arm/mach-imx/cpu-imx27.c | 28 +-
arch/arm/mach-imx/cpu-imx31.c | 49 +-
arch/arm/mach-imx/cpu-imx35.c | 30 +-
arch/arm/mach-imx/devices-imx27.h | 4 +
arch/arm/mach-imx/devices-imx31.h | 4 +
arch/arm/mach-imx/devices-imx35.h | 4 +
arch/arm/mach-imx/gpc.c | 113 +
arch/arm/mach-imx/head-v7.S | 99 +
arch/arm/mach-imx/hotplug.c | 44 +
arch/arm/mach-imx/lluart.c | 32 +
arch/arm/mach-imx/localtimer.c | 35 +
arch/arm/mach-imx/mach-apf9328.c | 1 +
arch/arm/mach-imx/mach-armadillo5x0.c | 19 +-
arch/arm/mach-imx/mach-bug.c | 1 +
arch/arm/mach-imx/mach-cpuimx27.c | 1 +
arch/arm/mach-imx/mach-cpuimx35.c | 3 +-
arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 1 +
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 1 +
arch/arm/mach-imx/mach-imx27ipcam.c | 1 +
arch/arm/mach-imx/mach-imx27lite.c | 1 +
arch/arm/mach-imx/mach-imx6q.c | 84 +
arch/arm/mach-imx/mach-kzm_arm11_01.c | 2 +
arch/arm/mach-imx/mach-mx1ads.c | 17 +-
arch/arm/mach-imx/mach-mx21ads.c | 1 +
arch/arm/mach-imx/mach-mx25_3ds.c | 11 +
arch/arm/mach-imx/mach-mx27_3ds.c | 3 +-
arch/arm/mach-imx/mach-mx27ads.c | 1 +
arch/arm/mach-imx/mach-mx31_3ds.c | 3 +-
arch/arm/mach-imx/mach-mx31ads.c | 1 +
arch/arm/mach-imx/mach-mx31lilly.c | 1 +
arch/arm/mach-imx/mach-mx31lite.c | 1 +
arch/arm/mach-imx/mach-mx31moboard.c | 18 +
arch/arm/mach-imx/mach-mx35_3ds.c | 1 +
arch/arm/mach-imx/mach-mxt_td60.c | 1 +
arch/arm/mach-imx/mach-pca100.c | 1 +
arch/arm/mach-imx/mach-pcm037.c | 1 +
arch/arm/mach-imx/mach-pcm038.c | 5 +-
arch/arm/mach-imx/mach-pcm043.c | 1 +
arch/arm/mach-imx/mach-qong.c | 7 +-
arch/arm/mach-imx/mach-scb9328.c | 1 +
arch/arm/mach-imx/mach-vpr200.c | 3 +-
arch/arm/mach-imx/mm-imx3.c | 256 ++
arch/arm/mach-imx/mm-imx31.c | 91 -
arch/arm/mach-imx/mm-imx35.c | 109 -
arch/arm/mach-imx/mmdc.c | 72 +
arch/arm/mach-imx/platsmp.c | 85 +
arch/arm/mach-imx/pm-imx27.c | 2 +-
arch/arm/mach-imx/pm-imx6q.c | 70 +
arch/arm/mach-imx/src.c | 49 +
arch/arm/mach-ixp4xx/Kconfig | 19 +
arch/arm/mach-ixp4xx/Makefile | 4 +
arch/arm/mach-ixp4xx/include/mach/uncompress.h | 3 +-
arch/arm/mach-ixp4xx/miccpt-pci.c | 78 +
arch/arm/mach-ixp4xx/omixp-setup.c | 273 ++
arch/arm/mach-mmp/Kconfig | 2 +-
arch/arm/mach-mmp/Makefile | 2 +-
arch/arm/mach-mmp/clock.h | 8 +-
arch/arm/mach-mmp/common.c | 4 +-
arch/arm/mach-mmp/gplugd.c | 2 +-
arch/arm/mach-mmp/include/mach/addr-map.h | 10 +-
arch/arm/mach-mmp/include/mach/gpio-pxa.h | 2 +-
arch/arm/mach-mmp/mmp2.c | 3 +-
arch/arm/mach-msm/board-msm8x60.c | 58 +-
arch/arm/mach-msm/hotplug.c | 2 +-
arch/arm/mach-msm/platsmp.c | 2 +-
arch/arm/mach-mx5/Kconfig | 50 +-
arch/arm/mach-mx5/Makefile | 6 +-
arch/arm/mach-mx5/board-cpuimx51.c | 28 +-
arch/arm/mach-mx5/board-cpuimx51sd.c | 26 +-
arch/arm/mach-mx5/board-mx50_rdp.c | 1 +
arch/arm/mach-mx5/board-mx51_3ds.c | 2 +-
arch/arm/mach-mx5/board-mx51_babbage.c | 36 +-
arch/arm/mach-mx5/board-mx51_efikamx.c | 14 +-
arch/arm/mach-mx5/board-mx51_efikasb.c | 25 +-
arch/arm/mach-mx5/board-mx53_ard.c | 18 +-
arch/arm/mach-mx5/board-mx53_evk.c | 10 +-
arch/arm/mach-mx5/board-mx53_loco.c | 31 +-
arch/arm/mach-mx5/board-mx53_smd.c | 26 +-
arch/arm/mach-mx5/clock-mx51-mx53.c | 72 +-
arch/arm/mach-mx5/cpu.c | 74 +-
arch/arm/mach-mx5/devices-imx51.h | 17 +
arch/arm/mach-mx5/devices-imx53.h | 6 +
arch/arm/mach-mx5/devices.c | 120 -
arch/arm/mach-mx5/devices.h | 5 -
arch/arm/mach-mx5/ehci.c | 2 +-
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 3 +-
arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c | 6 +-
arch/arm/mach-mx5/imx51-dt.c | 116 +
arch/arm/mach-mx5/imx53-dt.c | 126 +
arch/arm/mach-mx5/mm-mx50.c | 72 -
arch/arm/mach-mx5/mm.c | 90 +-
arch/arm/mach-mx5/mx51_efika.c | 20 +-
arch/arm/mach-mx5/pm-imx5.c | 18 +-
arch/arm/mach-mx5/system.c | 1 +
arch/arm/mach-mxs/Kconfig | 23 +
arch/arm/mach-mxs/Makefile | 7 +-
arch/arm/mach-mxs/clock-mx28.c | 26 +-
arch/arm/mach-mxs/devices-mx23.h | 2 +
arch/arm/mach-mxs/devices-mx28.h | 5 +
arch/arm/mach-mxs/devices/Kconfig | 6 +
arch/arm/mach-mxs/devices/Makefile | 2 +
arch/arm/mach-mxs/devices/platform-mxs-saif.c | 60 +
arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c | 51 +
arch/arm/mach-mxs/include/mach/debug-macro.S | 12 +-
arch/arm/mach-mxs/include/mach/devices-common.h | 12 +
arch/arm/mach-mxs/include/mach/gpio.h | 28 +-
arch/arm/mach-mxs/include/mach/mxs.h | 3 +
arch/arm/mach-mxs/include/mach/uncompress.h | 1 +
arch/arm/mach-mxs/mach-m28evk.c | 366 ++
arch/arm/mach-mxs/mach-mx23evk.c | 4 +-
arch/arm/mach-mxs/mach-mx28evk.c | 100 +-
arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 +-
arch/arm/mach-mxs/mach-tx28.c | 3 +-
arch/arm/mach-mxs/mm-mx28.c | 44 -
arch/arm/mach-mxs/{mm-mx23.c => mm.c} | 19 +
arch/arm/mach-nuc93x/Kconfig | 19 -
arch/arm/mach-nuc93x/Makefile | 14 -
arch/arm/mach-nuc93x/Makefile.boot | 3 -
arch/arm/mach-nuc93x/clock.c | 83 -
arch/arm/mach-nuc93x/clock.h | 36 -
arch/arm/mach-nuc93x/cpu.c | 135 -
arch/arm/mach-nuc93x/cpu.h | 48 -
arch/arm/mach-nuc93x/dev.c | 42 -
arch/arm/mach-nuc93x/include/mach/entry-macro.S | 32 -
arch/arm/mach-nuc93x/include/mach/hardware.h | 22 -
arch/arm/mach-nuc93x/include/mach/io.h | 28 -
arch/arm/mach-nuc93x/include/mach/irqs.h | 59 -
arch/arm/mach-nuc93x/include/mach/map.h | 139 -
arch/arm/mach-nuc93x/include/mach/regs-clock.h | 53 -
arch/arm/mach-nuc93x/include/mach/regs-ebi.h | 33 -
arch/arm/mach-nuc93x/include/mach/regs-irq.h | 42 -
arch/arm/mach-nuc93x/include/mach/regs-serial.h | 52 -
arch/arm/mach-nuc93x/include/mach/regs-timer.h | 28 -
arch/arm/mach-nuc93x/include/mach/system.h | 28 -
arch/arm/mach-nuc93x/include/mach/timex.h | 25 -
arch/arm/mach-nuc93x/include/mach/uncompress.h | 50 -
arch/arm/mach-nuc93x/include/mach/vmalloc.h | 23 -
arch/arm/mach-nuc93x/irq.c | 66 -
arch/arm/mach-nuc93x/mach-nuc932evb.c | 42 -
arch/arm/mach-nuc93x/nuc932.c | 65 -
arch/arm/mach-nuc93x/nuc932.h | 29 -
arch/arm/mach-nuc93x/time.c | 100 -
arch/arm/mach-omap1/Makefile | 2 +-
arch/arm/mach-omap1/board-ams-delta.c | 16 +-
arch/arm/mach-omap1/board-fsample.c | 76 +-
arch/arm/mach-omap1/board-generic.c | 16 +-
arch/arm/mach-omap1/board-h2.c | 16 +-
arch/arm/mach-omap1/board-h3.c | 16 +-
arch/arm/mach-omap1/board-htcherald.c | 12 +-
arch/arm/mach-omap1/board-innovator.c | 36 +-
arch/arm/mach-omap1/board-nokia770.c | 34 +-
arch/arm/mach-omap1/board-osk.c | 16 +-
arch/arm/mach-omap1/board-palmte.c | 16 +-
arch/arm/mach-omap1/board-palmtt.c | 16 +-
arch/arm/mach-omap1/board-palmz71.c | 18 +-
arch/arm/mach-omap1/board-perseus2.c | 75 +-
arch/arm/mach-omap1/board-sx1.c | 17 +-
arch/arm/mach-omap1/board-voiceblue.c | 16 +-
arch/arm/mach-omap1/devices.c | 3 +
arch/arm/mach-omap1/io.c | 59 +-
arch/arm/mach-omap1/mcbsp.c | 45 +
arch/arm/mach-omap1/timer.c | 173 +
arch/arm/mach-omap2/Kconfig | 8 +-
arch/arm/mach-omap2/Makefile | 92 +-
arch/arm/mach-omap2/board-2430sdp.c | 17 +-
arch/arm/mach-omap2/board-3430sdp.c | 9 +-
arch/arm/mach-omap2/board-3630sdp.c | 11 +-
arch/arm/mach-omap2/board-4430sdp.c | 19 +-
arch/arm/mach-omap2/board-am3517crane.c | 9 +-
arch/arm/mach-omap2/board-am3517evm.c | 8 +-
arch/arm/mach-omap2/board-apollon.c | 18 +-
arch/arm/mach-omap2/board-cm-t35.c | 13 +-
arch/arm/mach-omap2/board-cm-t3517.c | 9 +-
arch/arm/mach-omap2/board-devkit8000.c | 19 +-
arch/arm/mach-omap2/board-flash.c | 5 -
arch/arm/mach-omap2/board-flash.h | 19 +
arch/arm/mach-omap2/board-generic.c | 153 +-
arch/arm/mach-omap2/board-h4.c | 24 +-
arch/arm/mach-omap2/board-igep0020.c | 13 +-
arch/arm/mach-omap2/board-ldp.c | 9 +-
arch/arm/mach-omap2/board-n8x0.c | 25 +-
arch/arm/mach-omap2/board-omap3beagle.c | 22 +-
arch/arm/mach-omap2/board-omap3evm.c | 9 +-
arch/arm/mach-omap2/board-omap3logic.c | 11 +-
arch/arm/mach-omap2/board-omap3pandora.c | 11 +-
arch/arm/mach-omap2/board-omap3stalker.c | 16 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 18 +-
arch/arm/mach-omap2/board-omap4panda.c | 17 +-
arch/arm/mach-omap2/board-overo.c | 11 +-
arch/arm/mach-omap2/board-rm680.c | 25 +-
arch/arm/mach-omap2/board-rx51.c | 25 +-
arch/arm/mach-omap2/board-ti8168evm.c | 10 +-
arch/arm/mach-omap2/board-zoom.c | 23 +-
arch/arm/mach-omap2/clock2420_data.c | 48 +
arch/arm/mach-omap2/clock2430_data.c | 48 +
arch/arm/mach-omap2/clock3xxx_data.c | 47 +-
arch/arm/mach-omap2/clock44xx_data.c | 33 +
arch/arm/mach-omap2/clockdomain.c | 147 +-
arch/arm/mach-omap2/clockdomain.h | 22 +-
arch/arm/mach-omap2/clockdomain2xxx_3xxx.c | 4 -
arch/arm/mach-omap2/clockdomain44xx.c | 2 -
arch/arm/mach-omap2/clockdomains2420_data.c | 154 +
arch/arm/mach-omap2/clockdomains2430_data.c | 181 +
arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c | 803 +-----
arch/arm/mach-omap2/clockdomains3xxx_data.c | 398 +++
arch/arm/mach-omap2/clockdomains44xx_data.c | 409 +--
arch/arm/mach-omap2/common.c | 62 +-
arch/arm/mach-omap2/control.c | 16 +-
arch/arm/mach-omap2/devices.c | 91 +-
arch/arm/mach-omap2/display.c | 17 +-
arch/arm/mach-omap2/dma.c | 25 +-
arch/arm/mach-omap2/gpio.c | 22 +-
arch/arm/mach-omap2/hsmmc.c | 26 +-
arch/arm/mach-omap2/hwspinlock.c | 18 +-
arch/arm/mach-omap2/id.c | 191 +-
arch/arm/mach-omap2/io.c | 152 +-
arch/arm/mach-omap2/io.h | 7 -
arch/arm/mach-omap2/irq.c | 4 +-
arch/arm/mach-omap2/mcbsp.c | 120 +-
arch/arm/mach-omap2/omap-smp.c | 7 +-
arch/arm/mach-omap2/omap_hwmod.c | 3 -
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 59 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 67 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 200 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 104 +-
arch/arm/mach-omap2/omap_l3_noc.c | 147 +-
arch/arm/mach-omap2/omap_l3_noc.h | 224 +-
arch/arm/mach-omap2/omap_l3_smx.c | 91 +-
arch/arm/mach-omap2/omap_l3_smx.h | 164 +-
arch/arm/mach-omap2/omap_twl.c | 107 +-
arch/arm/mach-omap2/opp.c | 2 +-
arch/arm/mach-omap2/pm.c | 104 +-
arch/arm/mach-omap2/pm24xx.c | 27 -
arch/arm/mach-omap2/pm34xx.c | 2 +-
arch/arm/mach-omap2/powerdomain-common.c | 7 +-
arch/arm/mach-omap2/powerdomain.c | 110 +-
arch/arm/mach-omap2/powerdomain.h | 19 +-
arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 2 +-
arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 21 +-
arch/arm/mach-omap2/powerdomains2xxx_data.c | 48 +-
arch/arm/mach-omap2/powerdomains3xxx_data.c | 97 +-
arch/arm/mach-omap2/powerdomains44xx_data.c | 36 +-
arch/arm/mach-omap2/prcm.c | 19 +-
arch/arm/mach-omap2/prm2xxx_3xxx.c | 56 +
arch/arm/mach-omap2/prm2xxx_3xxx.h | 12 +
arch/arm/mach-omap2/prm44xx.c | 71 +
arch/arm/mach-omap2/prm44xx.h | 12 +
arch/arm/mach-omap2/sdrc.c | 13 +-
arch/arm/mach-omap2/serial.c | 39 +-
arch/arm/mach-omap2/smartreflex-class3.c | 4 +-
arch/arm/mach-omap2/smartreflex.c | 29 +-
arch/arm/mach-omap2/sr_device.c | 19 +-
arch/arm/mach-omap2/timer.c | 194 +-
arch/arm/mach-omap2/usb-musb.c | 26 +-
arch/arm/mach-omap2/vc.c | 367 ++
arch/arm/mach-omap2/vc.h | 88 +-
arch/arm/mach-omap2/vc3xxx_data.c | 31 +-
arch/arm/mach-omap2/vc44xx_data.c | 44 +-
arch/arm/mach-omap2/voltage.c | 1088 ++-----
arch/arm/mach-omap2/voltage.h | 150 +-
arch/arm/mach-omap2/voltagedomains2xxx_data.c | 32 +
arch/arm/mach-omap2/voltagedomains3xxx_data.c | 83 +-
arch/arm/mach-omap2/voltagedomains44xx_data.c | 99 +-
arch/arm/mach-omap2/vp.c | 278 ++
arch/arm/mach-omap2/vp.h | 133 +-
arch/arm/mach-omap2/vp3xxx_data.c | 35 +-
arch/arm/mach-omap2/vp44xx_data.c | 47 +-
arch/arm/mach-picoxcell/Makefile | 3 +
arch/arm/mach-picoxcell/Makefile.boot | 1 +
arch/arm/mach-picoxcell/common.c | 55 +
arch/arm/mach-picoxcell/common.h | 18 +
arch/arm/mach-picoxcell/include/mach/debug-macro.S | 35 +
arch/arm/mach-picoxcell/include/mach/entry-macro.S | 19 +
arch/arm/mach-picoxcell/include/mach/gpio.h | 1 +
arch/arm/mach-picoxcell/include/mach/hardware.h | 21 +
arch/arm/mach-picoxcell/include/mach/io.h | 22 +
arch/arm/mach-picoxcell/include/mach/irqs.h | 25 +
arch/arm/mach-picoxcell/include/mach/map.h | 25 +
arch/arm/mach-picoxcell/include/mach/memory.h | 1 +
.../mach-picoxcell/include/mach/picoxcell_soc.h | 25 +
arch/arm/mach-picoxcell/include/mach/system.h | 31 +
arch/arm/mach-picoxcell/include/mach/timex.h | 25 +
arch/arm/mach-picoxcell/include/mach/uncompress.h | 21 +
arch/arm/mach-picoxcell/include/mach/vmalloc.h | 14 +
arch/arm/mach-picoxcell/io.c | 32 +
arch/arm/mach-picoxcell/time.c | 132 +
arch/arm/mach-prima2/Makefile | 2 +
arch/arm/mach-prima2/clock.c | 4 +-
arch/arm/mach-prima2/irq.c | 43 +
arch/arm/mach-prima2/l2x0.c | 45 +-
arch/arm/mach-prima2/pm.c | 150 +
arch/arm/mach-prima2/pm.h | 29 +
arch/arm/mach-prima2/prima2.c | 2 +-
arch/arm/mach-prima2/rtciobrg.c | 139 +
arch/arm/mach-prima2/sleep.S | 64 +
arch/arm/mach-prima2/timer.c | 38 +-
arch/arm/mach-pxa/Kconfig | 38 +-
arch/arm/mach-pxa/Makefile | 2 +-
arch/arm/mach-pxa/balloon3.c | 10 +-
arch/arm/mach-pxa/cm-x2xx-pci.c | 2 +-
arch/arm/mach-pxa/cm-x2xx.c | 4 +-
arch/arm/mach-pxa/cm-x300.c | 8 +-
arch/arm/mach-pxa/include/mach/addr-map.h | 8 +-
arch/arm/mach-pxa/include/mach/balloon3.h | 2 +-
arch/arm/mach-pxa/include/mach/gpio-pxa.h | 2 +-
arch/arm/mach-pxa/include/mach/hardware.h | 9 +-
arch/arm/mach-pxa/include/mach/lpd270.h | 4 +-
arch/arm/mach-pxa/include/mach/mtd-xip.h | 1 -
arch/arm/mach-pxa/include/mach/palm27x.h | 2 +-
arch/arm/mach-pxa/include/mach/palmtx.h | 6 +-
arch/arm/mach-pxa/include/mach/pxa27x.h | 2 +
arch/arm/mach-pxa/include/mach/pxa95x.h | 7 +
arch/arm/mach-pxa/include/mach/pxafb.h | 13 +
arch/arm/mach-pxa/include/mach/smemc.h | 2 +-
arch/arm/mach-pxa/include/mach/zeus.h | 4 +-
arch/arm/mach-pxa/include/mach/zylonite.h | 4 +-
arch/arm/mach-pxa/irq.c | 4 +-
arch/arm/mach-pxa/lpd270.c | 2 +-
arch/arm/mach-pxa/palmtreo.c | 8 +
arch/arm/mach-pxa/palmtx.c | 8 +-
arch/arm/mach-pxa/pxa25x.c | 2 +-
arch/arm/mach-pxa/pxa27x.c | 2 +-
arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +
arch/arm/mach-pxa/pxa3xx.c | 2 +-
arch/arm/mach-pxa/saarb.c | 1 +
arch/arm/mach-pxa/z2.c | 3 +-
arch/arm/mach-pxa/zeus.c | 8 +-
arch/arm/mach-realview/hotplug.c | 2 +-
arch/arm/mach-realview/include/mach/debug-macro.S | 17 +-
arch/arm/mach-s3c2410/Kconfig | 6 -
arch/arm/mach-s3c2410/Makefile | 1 -
arch/arm/mach-s3c2410/dma.c | 14 -
arch/arm/mach-s3c2410/gpio.c | 72 -
arch/arm/mach-s3c2410/include/mach/map.h | 52 +-
arch/arm/mach-s3c2412/Kconfig | 1 -
arch/arm/mach-s3c2412/Makefile | 1 -
arch/arm/mach-s3c2412/dma.c | 18 -
arch/arm/mach-s3c2412/gpio.c | 62 -
arch/arm/mach-s3c2440/Kconfig | 2 -
arch/arm/mach-s3c2440/dma.c | 17 -
arch/arm/mach-s3c2443/dma.c | 27 -
arch/arm/mach-s3c64xx/cpu.c | 22 +-
arch/arm/mach-s3c64xx/include/mach/map.h | 9 +-
arch/arm/mach-s3c64xx/mach-crag6410.c | 3 -
arch/arm/mach-s3c64xx/mach-mini6410.c | 8 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 8 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 8 +-
arch/arm/mach-s5p64x0/dev-spi.c | 8 +-
arch/arm/mach-s5p64x0/dma.c | 7 +-
arch/arm/mach-s5p64x0/gpiolib.c | 7 +-
arch/arm/mach-s5p64x0/irq-eint.c | 3 +-
arch/arm/mach-s5p64x0/mach-smdk6440.c | 8 +-
arch/arm/mach-s5p64x0/mach-smdk6450.c | 8 +-
arch/arm/mach-s5pc100/mach-smdkc100.c | 8 +-
arch/arm/mach-s5pv210/Kconfig | 6 -
arch/arm/mach-s5pv210/Makefile | 2 +-
arch/arm/mach-s5pv210/mach-smdkv210.c | 8 +-
arch/arm/mach-shmobile/smp-sh73a0.c | 6 +-
arch/arm/mach-tegra/Kconfig | 6 +
arch/arm/mach-tegra/Makefile | 1 +
arch/arm/mach-tegra/Makefile.boot | 1 +
arch/arm/mach-tegra/board-dt.c | 26 +-
arch/arm/mach-tegra/board-harmony-pinmux.c | 8 +
arch/arm/mach-tegra/board-harmony-power.c | 13 +-
arch/arm/mach-tegra/board-harmony.c | 5 +-
arch/arm/mach-tegra/board-paz00-pinmux.c | 11 +
arch/arm/mach-tegra/board-paz00.c | 64 +-
arch/arm/mach-tegra/board-paz00.h | 8 +
arch/arm/mach-tegra/board-seaboard-pinmux.c | 75 +-
arch/arm/mach-tegra/board-seaboard.c | 81 +-
arch/arm/mach-tegra/board-seaboard.h | 12 +-
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 +
arch/arm/mach-tegra/board-trimslice.c | 4 +-
arch/arm/mach-tegra/common.c | 2 +-
arch/arm/mach-tegra/cpu-tegra.c | 6 +-
arch/arm/mach-tegra/devices.c | 86 +
arch/arm/mach-tegra/devices.h | 2 +
arch/arm/mach-tegra/dma.c | 14 +-
arch/arm/mach-tegra/include/mach/io.h | 18 +-
arch/arm/mach-tegra/include/mach/pinmux.h | 4 +
arch/arm/mach-tegra/include/mach/powergate.h | 1 -
arch/arm/mach-tegra/io.c | 8 +-
arch/arm/mach-tegra/pcie.c | 8 +-
arch/arm/mach-tegra/pinmux-t2-tables.c | 76 +-
arch/arm/mach-tegra/pinmux.c | 163 +-
arch/arm/mach-tegra/powergate.c | 5 +-
arch/arm/mach-tegra/tegra2_clocks.c | 50 +-
arch/arm/mach-tegra/timer.c | 6 +-
arch/arm/mach-u300/Kconfig | 46 -
arch/arm/mach-u300/Makefile.boot | 17 +-
arch/arm/mach-u300/core.c | 81 +-
arch/arm/mach-u300/include/mach/memory.h | 22 +-
arch/arm/mach-u300/u300.c | 16 -
arch/arm/mach-ux500/Makefile | 3 +-
arch/arm/mach-ux500/board-mop500-pins.c | 34 +-
arch/arm/mach-ux500/board-mop500-sdi.c | 52 +-
arch/arm/mach-ux500/board-mop500.c | 78 +-
arch/arm/mach-ux500/board-mop500.h | 3 +
arch/arm/mach-ux500/cache-l2x0.c | 95 +
arch/arm/mach-ux500/cpu.c | 98 +-
arch/arm/mach-ux500/hotplug.c | 2 +-
arch/arm/mach-ux500/include/mach/db5500-regs.h | 2 +
arch/arm/mach-ux500/include/mach/db8500-regs.h | 3 +
arch/arm/mach-ux500/include/mach/uncompress.h | 10 +-
arch/arm/mach-ux500/pins-db8500.h | 142 +-
arch/arm/mach-ux500/platsmp.c | 2 +-
arch/arm/mach-ux500/timer.c | 68 +
arch/arm/mach-vexpress/hotplug.c | 2 +-
arch/arm/mm/Kconfig | 4 +-
arch/arm/plat-mxc/Kconfig | 50 +-
arch/arm/plat-mxc/Makefile | 2 +-
arch/arm/plat-mxc/audmux-v2.c | 18 +-
arch/arm/plat-mxc/avic.c | 91 +-
arch/arm/plat-mxc/cpu.c | 9 +
arch/arm/plat-mxc/devices.c | 14 -
arch/arm/plat-mxc/devices/Kconfig | 9 +-
arch/arm/plat-mxc/devices/Makefile | 2 +
arch/arm/plat-mxc/devices/platform-ahci-imx.c | 156 +
arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c | 5 +
arch/arm/plat-mxc/devices/platform-imx-i2c.c | 6 +
arch/arm/plat-mxc/devices/platform-mxc-ehci.c | 9 +
arch/arm/plat-mxc/devices/platform-pata_imx.c | 59 +
arch/arm/plat-mxc/gic.c | 48 +
arch/arm/plat-mxc/include/mach/common.h | 63 +-
arch/arm/plat-mxc/include/mach/debug-macro.S | 40 +-
arch/arm/plat-mxc/include/mach/devices-common.h | 18 +
arch/arm/plat-mxc/include/mach/entry-macro.S | 64 +-
arch/arm/plat-mxc/include/mach/gpio.h | 34 +-
arch/arm/plat-mxc/include/mach/hardware.h | 19 +-
arch/arm/plat-mxc/include/mach/io.h | 22 +-
arch/arm/plat-mxc/include/mach/iomux-mx3.h | 1 +
arch/arm/plat-mxc/include/mach/iomux-mx51.h | 2270 +++++---------
arch/arm/plat-mxc/include/mach/iomux-mx53.h | 3530 +++++++-------------
arch/arm/plat-mxc/include/mach/iomux-v3.h | 11 +-
arch/arm/plat-mxc/include/mach/irqs.h | 10 +-
arch/arm/plat-mxc/include/mach/mx25.h | 5 +
arch/arm/plat-mxc/include/mach/mx27.h | 14 -
arch/arm/plat-mxc/include/mach/mx31.h | 14 -
arch/arm/plat-mxc/include/mach/mx35.h | 2 +-
arch/arm/plat-mxc/include/mach/mx3x.h | 18 +-
arch/arm/plat-mxc/include/mach/mx51.h | 183 +-
arch/arm/plat-mxc/include/mach/mx53.h | 1 +
arch/arm/plat-mxc/include/mach/mx6q.h | 33 +
arch/arm/plat-mxc/include/mach/mxc.h | 7 -
arch/arm/plat-mxc/include/mach/system.h | 35 +-
arch/arm/plat-mxc/irq-common.c | 21 +-
arch/arm/plat-mxc/irq-common.h | 3 +-
arch/arm/plat-mxc/pwm.c | 2 +-
arch/arm/plat-mxc/system.c | 3 +
arch/arm/plat-mxc/tzic.c | 32 +-
arch/arm/plat-nomadik/Kconfig | 8 +-
arch/arm/plat-nomadik/include/plat/mtu.h | 47 +-
arch/arm/plat-nomadik/include/plat/pincfg.h | 5 -
arch/arm/plat-nomadik/timer.c | 138 +-
arch/arm/plat-omap/devices.c | 44 -
arch/arm/plat-omap/dmtimer.c | 713 +++--
arch/arm/plat-omap/i2c.c | 18 +-
arch/arm/plat-omap/include/plat/clock.h | 2 -
arch/arm/plat-omap/include/plat/common.h | 30 +-
arch/arm/plat-omap/include/plat/cpu.h | 108 +-
arch/arm/plat-omap/include/plat/dmtimer.h | 233 +-
arch/arm/plat-omap/include/plat/io.h | 35 +-
arch/arm/plat-omap/include/plat/mcbsp.h | 208 +-
arch/arm/plat-omap/include/plat/omap_device.h | 31 +-
arch/arm/plat-omap/include/plat/omap_hwmod.h | 3 -
arch/arm/plat-omap/include/plat/voltage.h | 20 +
arch/arm/plat-omap/io.c | 10 +
arch/arm/plat-omap/mcbsp.c | 385 +--
arch/arm/plat-omap/omap_device.c | 450 ++-
arch/arm/plat-omap/sram.c | 85 +-
arch/arm/plat-pxa/include/plat/mfp.h | 2 +-
arch/arm/plat-pxa/mfp.c | 4 +-
arch/arm/plat-s3c24xx/cpu.c | 9 +-
arch/arm/plat-s3c24xx/include/plat/map.h | 100 -
arch/arm/plat-s5p/cpu.c | 46 +-
arch/arm/plat-s5p/include/plat/exynos4.h | 5 +-
arch/arm/plat-s5p/include/plat/pll.h | 56 +-
arch/arm/plat-samsung/Kconfig | 7 +
arch/arm/plat-samsung/Makefile | 2 +-
arch/arm/plat-samsung/cpu.c | 58 +
arch/arm/plat-samsung/dev-hsmmc.c | 19 +-
arch/arm/plat-samsung/dev-hsmmc1.c | 19 +-
arch/arm/plat-samsung/dev-hsmmc2.c | 19 +-
arch/arm/plat-samsung/dev-hsmmc3.c | 19 +-
arch/arm/plat-samsung/dev-ts.c | 9 +
arch/arm/plat-samsung/include/plat/cpu.h | 113 +-
arch/arm/plat-samsung/include/plat/dma-s3c24xx.h | 6 -
arch/arm/plat-samsung/include/plat/map-s3c.h | 84 +
.../include/plat/map-s5p.h | 6 +-
arch/arm/plat-samsung/include/plat/sdhci.h | 7 +
arch/arm/plat-samsung/platformdata.c | 22 +
arch/arm/plat-versatile/platsmp.c | 2 +-
drivers/char/hw_random/Kconfig | 13 +
drivers/char/hw_random/Makefile | 1 +
drivers/char/hw_random/atmel-rng.c | 158 +
drivers/clocksource/Kconfig | 15 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/clksrc-dbx500-prcmu.c | 106 +
drivers/gpio/gpio-mxc.c | 12 +
drivers/gpio/gpio-mxs.c | 2 +
drivers/gpio/gpio-pxa.c | 2 +-
drivers/gpio/gpio-tegra.c | 143 +-
drivers/misc/Kconfig | 2 +-
drivers/mmc/host/davinci_mmc.c | 13 +
drivers/mmc/host/mxcmmc.c | 1 +
drivers/of/base.c | 84 +
drivers/of/irq.c | 107 +
drivers/pcmcia/pxa2xx_balloon3.c | 2 +-
drivers/tty/serial/msm_serial.c | 30 +-
drivers/usb/host/ohci-at91.c | 239 ++-
drivers/video/mbx/mbxfb.c | 6 +-
drivers/video/pxafb.c | 10 -
include/linux/clksrc-dbx500-prcmu.h | 20 +
include/linux/irqdomain.h | 16 +-
include/linux/of.h | 18 +
include/linux/of_irq.h | 3 +
include/linux/rtc/sirfsoc_rtciobrg.h | 18 +
kernel/irq/irqdomain.c | 12 +-
665 files changed, 24804 insertions(+), 14861 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/calxeda.txt
create mode 100644 Documentation/devicetree/bindings/arm/fsl.txt
create mode 100644 Documentation/devicetree/bindings/arm/gic.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/dsp.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/iva.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/l3-noc.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/mpu.txt
create mode 100644 Documentation/devicetree/bindings/arm/omap/omap.txt
create mode 100644 Documentation/devicetree/bindings/arm/picoxcell.txt
create mode 100644 Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
create mode 100644 Documentation/devicetree/bindings/tty/serial/msm_serial.txt
create mode 100644 arch/arm/boot/dts/at91sam9g20.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9g45.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9m10g45ek.dts
create mode 100644 arch/arm/boot/dts/highbank.dts
create mode 100644 arch/arm/boot/dts/imx51-babbage.dts
create mode 100644 arch/arm/boot/dts/imx51.dtsi
create mode 100644 arch/arm/boot/dts/imx53-ard.dts
create mode 100644 arch/arm/boot/dts/imx53-evk.dts
create mode 100644 arch/arm/boot/dts/imx53-qsb.dts
create mode 100644 arch/arm/boot/dts/imx53-smd.dts
create mode 100644 arch/arm/boot/dts/imx53.dtsi
create mode 100644 arch/arm/boot/dts/imx6q-sabreauto.dts
create mode 100644 arch/arm/boot/dts/imx6q.dtsi
create mode 100644 arch/arm/boot/dts/msm8660-surf.dts
create mode 100644 arch/arm/boot/dts/omap3-beagle.dts
create mode 100644 arch/arm/boot/dts/omap3.dtsi
create mode 100644 arch/arm/boot/dts/omap4-panda.dts
create mode 100644 arch/arm/boot/dts/omap4-sdp.dts
create mode 100644 arch/arm/boot/dts/omap4.dtsi
create mode 100644 arch/arm/boot/dts/picoxcell-pc3x2.dtsi
create mode 100644 arch/arm/boot/dts/picoxcell-pc3x3.dtsi
create mode 100644 arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
create mode 100644 arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
create mode 100644 arch/arm/boot/dts/tegra-ventana.dts
create mode 100644 arch/arm/boot/dts/usb_a9g20.dts
create mode 100644 arch/arm/configs/at91sam9g45_defconfig
rename arch/arm/configs/{mx27_defconfig => imx_v4_v5_defconfig} (69%)
delete mode 100644 arch/arm/configs/mx1_defconfig
delete mode 100644 arch/arm/configs/mx21_defconfig
rename arch/arm/configs/{mx51_defconfig => mx5_defconfig} (82%)
create mode 100644 arch/arm/mach-at91/board-dt.c
create mode 100644 arch/arm/mach-at91/board-rsi-ews.c
delete mode 100644 arch/arm/mach-at91/board-usb-a9260.c
delete mode 100644 arch/arm/mach-at91/board-usb-a9263.c
create mode 100644 arch/arm/mach-at91/board-usb-a926x.c
create mode 100644 arch/arm/mach-ep93xx/vision_ep9307.c
create mode 100644 arch/arm/mach-exynos4/clock-exynos4210.c
create mode 100644 arch/arm/mach-exynos4/clock-exynos4212.c
create mode 100644 arch/arm/mach-exynos4/include/mach/exynos4-clock.h
create mode 100644 arch/arm/mach-exynos4/mach-origen.c
create mode 100644 arch/arm/mach-exynos4/mach-smdk4x12.c
delete mode 100644 arch/arm/mach-exynos4/mach-smdkc210.c
create mode 100644 arch/arm/mach-highbank/Makefile
create mode 100644 arch/arm/mach-highbank/Makefile.boot
create mode 100644 arch/arm/mach-highbank/clock.c
create mode 100644 arch/arm/mach-highbank/core.h
create mode 100644 arch/arm/mach-highbank/highbank.c
create mode 100644 arch/arm/mach-highbank/hotplug.c
create mode 100644 arch/arm/mach-highbank/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-highbank/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-highbank/include/mach/gpio.h
create mode 100644 arch/arm/mach-highbank/include/mach/io.h
create mode 100644 arch/arm/mach-highbank/include/mach/irqs.h
create mode 100644 arch/arm/mach-highbank/include/mach/memory.h
create mode 100644 arch/arm/mach-highbank/include/mach/system.h
create mode 100644 arch/arm/mach-highbank/include/mach/timex.h
create mode 100644 arch/arm/mach-highbank/include/mach/uncompress.h
create mode 100644 arch/arm/mach-highbank/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-highbank/lluart.c
create mode 100644 arch/arm/mach-highbank/localtimer.c
create mode 100644 arch/arm/mach-highbank/platsmp.c
create mode 100644 arch/arm/mach-highbank/pm.c
create mode 100644 arch/arm/mach-highbank/sysregs.h
create mode 100644 arch/arm/mach-highbank/system.c
delete mode 100644 arch/arm/mach-imx/cache-l2x0.c
create mode 100644 arch/arm/mach-imx/clock-imx6q.c
create mode 100644 arch/arm/mach-imx/cpu-imx25.c
create mode 100644 arch/arm/mach-imx/gpc.c
create mode 100644 arch/arm/mach-imx/head-v7.S
create mode 100644 arch/arm/mach-imx/hotplug.c
create mode 100644 arch/arm/mach-imx/lluart.c
create mode 100644 arch/arm/mach-imx/localtimer.c
create mode 100644 arch/arm/mach-imx/mach-imx6q.c
create mode 100644 arch/arm/mach-imx/mm-imx3.c
delete mode 100644 arch/arm/mach-imx/mm-imx31.c
delete mode 100644 arch/arm/mach-imx/mm-imx35.c
create mode 100644 arch/arm/mach-imx/mmdc.c
create mode 100644 arch/arm/mach-imx/platsmp.c
create mode 100644 arch/arm/mach-imx/pm-imx6q.c
create mode 100644 arch/arm/mach-imx/src.c
create mode 100644 arch/arm/mach-ixp4xx/miccpt-pci.c
create mode 100644 arch/arm/mach-ixp4xx/omixp-setup.c
delete mode 100644 arch/arm/mach-mx5/devices.c
delete mode 100644 arch/arm/mach-mx5/devices.h
create mode 100644 arch/arm/mach-mx5/imx51-dt.c
create mode 100644 arch/arm/mach-mx5/imx53-dt.c
delete mode 100644 arch/arm/mach-mx5/mm-mx50.c
create mode 100644 arch/arm/mach-mxs/devices/platform-mxs-saif.c
create mode 100644 arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
create mode 100644 arch/arm/mach-mxs/mach-m28evk.c
delete mode 100644 arch/arm/mach-mxs/mm-mx28.c
rename arch/arm/mach-mxs/{mm-mx23.c => mm.c} (75%)
delete mode 100644 arch/arm/mach-nuc93x/Kconfig
delete mode 100644 arch/arm/mach-nuc93x/Makefile
delete mode 100644 arch/arm/mach-nuc93x/Makefile.boot
delete mode 100644 arch/arm/mach-nuc93x/clock.c
delete mode 100644 arch/arm/mach-nuc93x/clock.h
delete mode 100644 arch/arm/mach-nuc93x/cpu.c
delete mode 100644 arch/arm/mach-nuc93x/cpu.h
delete mode 100644 arch/arm/mach-nuc93x/dev.c
delete mode 100644 arch/arm/mach-nuc93x/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-nuc93x/include/mach/hardware.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/io.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/irqs.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/map.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/regs-clock.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/regs-ebi.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/regs-irq.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/regs-serial.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/regs-timer.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/system.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/timex.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-nuc93x/include/mach/vmalloc.h
delete mode 100644 arch/arm/mach-nuc93x/irq.c
delete mode 100644 arch/arm/mach-nuc93x/mach-nuc932evb.c
delete mode 100644 arch/arm/mach-nuc93x/nuc932.c
delete mode 100644 arch/arm/mach-nuc93x/nuc932.h
delete mode 100644 arch/arm/mach-nuc93x/time.c
create mode 100644 arch/arm/mach-omap1/timer.c
create mode 100644 arch/arm/mach-omap2/clockdomains2420_data.c
create mode 100644 arch/arm/mach-omap2/clockdomains2430_data.c
create mode 100644 arch/arm/mach-omap2/clockdomains3xxx_data.c
create mode 100644 arch/arm/mach-omap2/vc.c
create mode 100644 arch/arm/mach-omap2/voltagedomains2xxx_data.c
create mode 100644 arch/arm/mach-omap2/vp.c
create mode 100644 arch/arm/mach-picoxcell/Makefile
create mode 100644 arch/arm/mach-picoxcell/Makefile.boot
create mode 100644 arch/arm/mach-picoxcell/common.c
create mode 100644 arch/arm/mach-picoxcell/common.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-picoxcell/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-picoxcell/include/mach/gpio.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/hardware.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/io.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/irqs.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/map.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/memory.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/system.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/timex.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/uncompress.h
create mode 100644 arch/arm/mach-picoxcell/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-picoxcell/io.c
create mode 100644 arch/arm/mach-picoxcell/time.c
create mode 100644 arch/arm/mach-prima2/pm.c
create mode 100644 arch/arm/mach-prima2/pm.h
create mode 100644 arch/arm/mach-prima2/rtciobrg.c
create mode 100644 arch/arm/mach-prima2/sleep.S
create mode 100644 arch/arm/mach-pxa/include/mach/pxa95x.h
delete mode 100644 arch/arm/mach-s3c2410/gpio.c
delete mode 100644 arch/arm/mach-s3c2412/gpio.c
create mode 100644 arch/arm/mach-ux500/cache-l2x0.c
create mode 100644 arch/arm/mach-ux500/timer.c
create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
create mode 100644 arch/arm/plat-mxc/devices/platform-pata_imx.c
create mode 100644 arch/arm/plat-mxc/gic.c
create mode 100644 arch/arm/plat-mxc/include/mach/mx6q.h
create mode 100644 arch/arm/plat-omap/include/plat/voltage.h
delete mode 100644 arch/arm/plat-s3c24xx/include/plat/map.h
create mode 100644 arch/arm/plat-samsung/cpu.c
create mode 100644 arch/arm/plat-samsung/include/plat/map-s3c.h
rename arch/arm/{plat-s5p => plat-samsung}/include/plat/map-s5p.h (94%)
create mode 100644 drivers/char/hw_random/atmel-rng.c
create mode 100644 drivers/clocksource/clksrc-dbx500-prcmu.c
create mode 100644 include/linux/clksrc-dbx500-prcmu.h
create mode 100644 include/linux/rtc/sirfsoc_rtciobrg.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists