[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1320753142.git.n.voss@weinmann.de>
Date: Tue, 8 Nov 2011 12:52:22 +0100
From: Nikolaus Voss <n.voss@...nmann.de>
To: linux-i2c@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Cc: ben-linux@...ff.org, khali@...ux-fr.org, nicolas.ferre@...el.com,
rmallon@...il.com, balbi@...com
Subject: [PATCH V3 0/4] AT91: replace broken TWI driver i2c-at91.c
The old driver has two main deficencies:
i) No repeated start (Sr) condiction is possible, this makes it unusable
e.g. for most SMBus transfers.
ii) I/O was done with polling/busy waiting what caused over-/underruns
even at light system loads and clock speeds.
The new driver overcomes these deficencies and in addition allows for
more than one TWI interface.
A remaining limitation is the fact, that only one repeated start is
possible (two concatenated messages). This limitation is imposed by
the hardware. However, this should not be a problem as all common
i2c-client communication does not rely on more than one repeated start.
V3: Integrated review comments from Ryan Mallon and Felipe Balbi
V2: Fixed whitespace issue
Nikolaus Voss (4):
drivers/i2c/busses/i2c-at91.c: remove broken driver
drivers/i2c/busses/i2c-at91.c: add new driver
G45 TWI: remove open drain setting for twi function gpios
Add lookup entries for twi_clk for devices with more than one TWI
port
arch/arm/mach-at91/at91sam9g45.c | 2 +
arch/arm/mach-at91/at91sam9g45_devices.c | 6 -
arch/arm/mach-at91/at91sam9rl.c | 2 +
drivers/i2c/busses/Kconfig | 11 +-
drivers/i2c/busses/i2c-at91.c | 453 +++++++++++++++++++-----------
5 files changed, 292 insertions(+), 182 deletions(-)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists