| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1320874652-18371-2-git-send-email-ricardo.ribalda@gmail.com>
Date: Wed, 9 Nov 2011 22:37:28 +0100
From: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To: rdunlap@...otime.net, dmitry.torokhov@...il.com,
grant.likely@...retlab.ca, ricardo.ribalda@...il.com,
jic23@....ac.uk, aghayal@...eaurora.org, sameo@...ux.intel.com,
peter.ujfalusi@...com, alan@...ux.intel.com, david@...deman.nu,
Shubhrajyoti@...com, saaguirre@...com, hemanthv@...com,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-input@...r.kernel.org, devicetree-discuss@...ts.ozlabs.org
Subject: [PATCHv6_input/next 1/5] input/cma3000_d0x: Support devices without pdata
Architectures based on device-tree does not have platform data
associated to the spi/i2c devices. Instead they can have some of
the options embedded in the device tree.
This patch allows the cma3000 driver to get the configuration
from the platform_data, the device tree, or in the wort case,
just use a default configuration.
v5: Fixes suggested by Grant Likely
-Device tree binding doc
-Use of_device_id table
v3: Fixes suggested by Jonathan Cameron
-Code style
-Add support for the device tree
v2: Fixes suggested by Jonathan Cameron
-Spelling
-Simplify pdata!=NULL check
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
---
.../devicetree/bindings/input/cma3000_d0x.txt | 71 ++++++++++++++++
drivers/input/misc/cma3000_d0x.c | 86 +++++++++++++++++---
drivers/input/misc/cma3000_d0x_i2c.c | 7 ++
3 files changed, 153 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/cma3000_d0x.txt
diff --git a/Documentation/devicetree/bindings/input/cma3000_d0x.txt b/Documentation/devicetree/bindings/input/cma3000_d0x.txt
new file mode 100644
index 0000000..41becc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cma3000_d0x.txt
@@ -0,0 +1,71 @@
+* VTI CMA3000-D0x Accelerometer
+
+Required properties:
+
+- compatible : "vti,cma3000_d01"
+
+- reg : Offset and length of the register set for this device
+
+- interrupts : <a> where a is the interrupt number for the port.
+
+- interrupt-parent : the phandle for the interrupt controller
+that services interrupts for this device.
+
+
+Optional properties:
+
+- vti,fuzz_x: <a> where a is the noise on X Axis in mili g.
+ * Value per default is 18;
+
+- vti,fuzz_y: <a> where a is the noise on Y Axis in mili g
+ * Value per default is 18;
+
+- vti,fuzz_z: <a> where a is the noise on Z Axis in mili g
+ * Value per default is 18;
+
+- g_range: <a> where a is G range in milli g. Value can be:
+ - 2000: for 2G
+ - 8000: for 8G
+ * Value per default is 2000;
+
+- mode: <a> where a is the default Operating mode. Value can be:
+ - 0: power down mode
+ - 1: 100 Hz Measurement mode
+ - 2: 400 Hz Measurement mode
+ - 3: 40 Hz Measurement mode
+ - 4: Motion Detect mode (default)
+ - 5: 100 Hz Free fall mode
+ - 6: 40 Hz Free fall mode
+ - 7: Power off mode
+ * Value per default is 2;
+
+- mdthr: <a> where a is the Motion detect g range threshold value.
+Value X means:
+ - X: X * 71mg (8G Range)
+ - X: X * 18mg (2G Range)
+ * Value per default is 8;
+
+- mdfftmr: <a> where a is the Motion detect and free fall time threshold value.
+Value X memans:
+ - X: (X & 0x70) * 100 ms (MDTMR)
+ - (X & 0x0F) * 2.5 ms (FFTMR 400 Hz)
+ - (X & 0x0F) * 10 ms (FFTMR 100 Hz)
+ * Value per default is 51;
+
+- ffthr: <a> where a is the Free fall g range threshold value. Value X means:
+ - X: (X >> 2) * 18mg (2G Range)
+ - X: (X & 0x0F) * 71 mg (8G Range)
+ * Value per default is 8;
+
+
+Example:
+
+cma3000 {
+ compatible = "vti,cma3000_d01";
+ reg = < 1 1 >;
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ spi-max-frequency = <500000>;
+ vti,mode = <2>;
+} ;
+
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index 1633b63..e66036d 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/cma3000.h>
+#include <linux/of.h>
#include "cma3000_d0x.h"
@@ -62,9 +63,21 @@
#define BIT_TO_2G 18
#define BIT_TO_8G 71
+static struct cma3000_platform_data cma3000_default_pdata = {
+ .mdthr = 0x8,
+ .mdfftmr = 0x33,
+ .ffthr = 0x8,
+ .mode = CMAMODE_MEAS400,
+ .g_range = CMARANGE_2G,
+ .fuzz_x = BIT_TO_2G,
+ .fuzz_y = BIT_TO_2G,
+ .fuzz_z = BIT_TO_2G,
+ .irqflags = 0,
+};
+
struct cma3000_accl_data {
const struct cma3000_bus_ops *bus_ops;
- const struct cma3000_platform_data *pdata;
+ struct cma3000_platform_data pdata;
struct device *dev;
struct input_dev *input_dev;
@@ -182,7 +195,7 @@ static int cma3000_reset(struct cma3000_accl_data *data)
static int cma3000_poweron(struct cma3000_accl_data *data)
{
- const struct cma3000_platform_data *pdata = data->pdata;
+ struct cma3000_platform_data *pdata = &data->pdata;
u8 ctrl = 0;
int ret;
@@ -280,22 +293,57 @@ void cma3000_resume(struct cma3000_accl_data *data)
}
EXPORT_SYMBOL(cma3000_resume);
+#ifdef CONFIG_OF
+void cma3000_get_pdata_of(struct device *dev, struct cma3000_accl_data *data)
+{
+ const __be32 *property;
+ int len;
+
+ property = of_get_property(dev->of_node, "vti,mdthr", &len);
+ if (property && len == sizeof(int))
+ data->pdata.mdthr = be32_to_cpup(property);
+
+ property = of_get_property(dev->of_node, "vti,mdfftmr", &len);
+ if (property && len == sizeof(int))
+ data->pdata.mdfftmr = be32_to_cpup(property);
+
+ property = of_get_property(dev->of_node, "vti,mode", &len);
+ if (property && len == sizeof(int))
+ data->pdata.mode = be32_to_cpup(property);
+
+ property = of_get_property(dev->of_node, "vti,g_range", &len);
+ if (property && len == sizeof(int))
+ data->pdata.g_range = be32_to_cpup(property);
+
+ property = of_get_property(dev->of_node, "vti,fuzz_x", &len);
+ if (property && len == sizeof(int))
+ data->pdata.fuzz_x = be32_to_cpup(property);
+
+ property = of_get_property(dev->of_node, "vti,fuzz_y", &len);
+ if (property && len == sizeof(int))
+ data->pdata.fuzz_y = be32_to_cpup(property);
+
+ property = of_get_property(dev->of_node, "vti,fuzz_z", &len);
+ if (property && len == sizeof(int))
+ data->pdata.fuzz_z = be32_to_cpup(property);
+
+ property = of_get_property(dev->of_node, "vti,irqflags", &len);
+ if (property && len == sizeof(int))
+ data->pdata.irqflags = be32_to_cpup(property);
+
+ return;
+}
+#endif
+
struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
const struct cma3000_bus_ops *bops)
{
- const struct cma3000_platform_data *pdata = dev->platform_data;
+ struct cma3000_platform_data *pdata;
struct cma3000_accl_data *data;
struct input_dev *input_dev;
int rev;
int error;
- if (!pdata) {
- dev_err(dev, "platform data not found\n");
- error = -EINVAL;
- goto err_out;
- }
-
-
/* if no IRQ return error */
if (irq == 0) {
error = -EINVAL;
@@ -309,10 +357,26 @@ struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
goto err_free_mem;
}
+ /*Init platform data*/
+ if (dev->platform_data != NULL) {
+ memcpy(&data->pdata, dev->platform_data, sizeof(data->pdata));
+ } else {
+ memcpy(&data->pdata, &cma3000_default_pdata,
+ sizeof(data->pdata));
+ #ifdef CONFIG_OF
+ if (dev->of_node != NULL)
+ cma3000_get_pdata_of(dev, data);
+ else
+ dev_info(dev, "platform data not found, using default\n");
+ #else
+ dev_info(dev, "platform data not found, using default\n");
+ #endif
+ }
+ pdata = &data->pdata;
+
data->dev = dev;
data->input_dev = input_dev;
data->bus_ops = bops;
- data->pdata = pdata;
data->irq = irq;
mutex_init(&data->mutex);
diff --git a/drivers/input/misc/cma3000_d0x_i2c.c b/drivers/input/misc/cma3000_d0x_i2c.c
index d100cc5..922f8c2 100644
--- a/drivers/input/misc/cma3000_d0x_i2c.c
+++ b/drivers/input/misc/cma3000_d0x_i2c.c
@@ -112,6 +112,12 @@ static const struct i2c_device_id cma3000_i2c_id[] = {
MODULE_DEVICE_TABLE(i2c, cma3000_i2c_id);
+static const struct of_device_id cma3000_i2c_dt_ids[] = {
+ { .compatible = "vti,cma3000_d01", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, cma3000_i2c_dt_ids);
+
static struct i2c_driver cma3000_i2c_driver = {
.probe = cma3000_i2c_probe,
.remove = __devexit_p(cma3000_i2c_remove),
@@ -119,6 +125,7 @@ static struct i2c_driver cma3000_i2c_driver = {
.driver = {
.name = "cma3000_i2c_accl",
.owner = THIS_MODULE,
+ .of_match_table = cma3000_i2c_dt_ids,
#ifdef CONFIG_PM
.pm = &cma3000_i2c_pm_ops,
#endif
--
1.7.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists