| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20111109212715.797132786@clark.kroah.org>
Date: Wed, 09 Nov 2011 13:27:53 -0800
From: Greg KH <gregkh@...e.de>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: torvalds@...ux-foundation.org, akpm@...ux-foundation.org,
alan@...rguk.ukuu.org.uk, Stanislaw Gruszka <sgruszka@...hat.com>,
Johannes Berg <johannes.berg@...el.com>,
Wey-Yi Guy <wey-yi.w.guy@...el.com>,
"John W. Linville" <linville@...driver.com>
Subject: [151/262] iwlagn: do not use interruptible waits
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <johannes.berg@...el.com>
Upstream commit effd4d9aece9184f526e6556786a94d335e38b71.
Since the dawn of its time, iwlwifi has used
interruptible waits to wait for synchronous
commands and firmware loading.
This leads to "interesting" bugs, because it
can't actually handle the interruptions; for
example when a command sending is interrupted
it will assume the command completed fully,
and then leave it pending, which leads to all
kinds of trouble when the command finishes
later.
Since there's no easy way to gracefully deal
with interruptions, fix the driver to not use
interruptible waits.
This at least fixes the error
iwlagn 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD'
I have seen in P2P testing, but it is likely
that there are other errors caused by this.
Cc: Stanislaw Gruszka <sgruszka@...hat.com>
Signed-off-by: Johannes Berg <johannes.berg@...el.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@...el.com>
Signed-off-by: John W. Linville <linville@...driver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/net/wireless/iwlwifi/iwl-agn-ucode.c | 9 ++-------
drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-core.c | 4 ++--
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-rx.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +-
6 files changed, 8 insertions(+), 13 deletions(-)
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -144,13 +144,8 @@ static int iwlagn_load_section(struct iw
FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD);
IWL_DEBUG_INFO(priv, "%s uCode section being loaded...\n", name);
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
- priv->ucode_write_complete, 5 * HZ);
- if (ret == -ERESTARTSYS) {
- IWL_ERR(priv, "Could not load the %s uCode section due "
- "to interrupt\n", name);
- return ret;
- }
+ ret = wait_event_timeout(priv->wait_command_queue,
+ priv->ucode_write_complete, 5 * HZ);
if (!ret) {
IWL_ERR(priv, "Could not load the %s uCode section\n",
name);
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -797,7 +797,7 @@ static void iwl_irq_tasklet(struct iwl_p
handled |= CSR_INT_BIT_FH_TX;
/* Wake up uCode load routine, now that load is complete */
priv->ucode_write_complete = 1;
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
if (inta & ~handled) {
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -899,7 +899,7 @@ void iwlagn_fw_error(struct iwl_priv *pr
* commands by clearing the ready bit */
clear_bit(STATUS_READY, &priv->status);
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
if (!ondemand) {
/*
@@ -950,7 +950,7 @@ void iwl_irq_handle_error(struct iwl_pri
*/
clear_bit(STATUS_READY, &priv->status);
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
IWL_ERR(priv, "RF is used by WiMAX\n");
return;
}
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -194,7 +194,7 @@ int iwl_send_cmd_sync(struct iwl_priv *p
return ret;
}
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ ret = wait_event_timeout(priv->wait_command_queue,
!test_bit(STATUS_HCMD_ACTIVE, &priv->status),
HOST_COMPLETE_TIMEOUT);
if (!ret) {
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -738,7 +738,7 @@ static void iwl_rx_card_state_notif(stru
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
else
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
static void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -821,7 +821,7 @@ void iwl_tx_cmd_complete(struct iwl_priv
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
get_cmd_string(cmd->hdr.cmd));
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
/* Mark as unmapped */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists