[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1321377163-26308-3-git-send-email-grundler@chromium.org>
Date: Tue, 15 Nov 2011 09:12:41 -0800
From: Grant Grundler <grundler@...omium.org>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Allan Chou <allan@...x.com.tw>,
Freddy Xin <freddy@...x.com.tw>,
Grant Grundler <grundler@...gle.com>,
Grant Grundler <grundler@...omium.org>
Subject: [PATCH 3/5] net-next:asix: reduce AX88772 init time by about 2 seconds
From: Grant Grundler <grundler@...gle.com>
ax88772_reset takes about 2 seconds and is called twice.
Once from ax88772_bind() directly and again indirectly from usbnet_open().
Reset the USB FW/Phy enough to blink the LEDs when inserted.
Signed-off-by: Allan Chou <allan@...x.com.tw>
Signed-off-by: Grant Grundler <grundler@...omium.org>
---
drivers/net/usb/asix.c | 30 +++++++++++++++++++++++++-----
1 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index b4675e8..8462be5 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1083,7 +1083,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ int ret, embd_phy;
struct asix_data *data = (struct asix_data *)&dev->data;
u8 buf[ETH_ALEN];
u32 phyid;
@@ -1108,16 +1108,36 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
dev->mii.reg_num_mask = 0x1f;
dev->mii.phy_id = asix_get_phy_addr(dev);
- phyid = asix_get_phyid(dev);
- dbg("PHYID=0x%08x", phyid);
-
dev->net->netdev_ops = &ax88772_netdev_ops;
dev->net->ethtool_ops = &ax88772_ethtool_ops;
- ret = ax88772_reset(dev);
+ embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+ /* Reset the PHY to normal operation mode */
+ ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+ if (ret < 0) {
+ dbg("Select PHY #1 failed: %d", ret);
+ return ret;
+ }
+
+ ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
if (ret < 0)
return ret;
+ msleep(150);
+
+ ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+ if (ret < 0)
+ return ret;
+
+ msleep(150);
+
+ ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+
+ /* Read PHYID register *AFTER* the PHY was reset properly */
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
/* hard_mtu is still the default - the device does not support
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists