| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ae47c7f2f31276ffb2b8db132bcabe80aa1139f6.1321609430.git.viresh.kumar@st.com>
Date: Fri, 18 Nov 2011 15:20:12 +0530
From: Viresh Kumar <viresh.kumar@...com>
To: <baruch@...s.co.il>, <grant.likely@...retlab.ca>, <rjw@...k.pl>
Cc: <linux-kernel@...r.kernel.org>, <armando.visconti@...com>,
<shiraz.hashim@...com>, <vipin.kumar@...com>,
<rajeev-dlh.kumar@...com>, <deepak.sikri@...com>,
<vipulkumar.samar@...com>, <amit.virdi@...com>,
<viresh.kumar@...com>, <pratyush.anand@...com>,
<bhupesh.sharma@...com>, <viresh.linux@...il.com>,
<bhavna.yadav@...com>, <vincenzo.frascino@...com>,
<mirko.gardi@...com>
Subject: [PATCH V4] GPIO/pl061: Add suspend resume capability
From: Deepak Sikri <deepak.sikri@...com>
This patch adds the suspend and resume operations in the driver. The patch
ensures the data save and restore for the device registers during the
suspend and resume operations respectively.
Signed-off-by: Deepak Sikri <deepak.sikri@...com>
Signed-off-by: Viresh Kumar <viresh.kumar@...com>
Acked-by: Baruch Siach <baruch@...s.co.il>
---
Changes since V3:
- pl061_dev_pm_ops marked as static
changes Since V2:
- gpio_context_save_regs renamed to pl061_context_save_regs
- Hibernation callbacks added with help of SIMPLE_DEV_PM_OPS macro
drivers/gpio/gpio-pl061.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 093c90b..42a5d56 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -23,6 +23,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/slab.h>
+#include <linux/pm.h>
#define GPIODIR 0x400
#define GPIOIS 0x404
@@ -35,6 +36,17 @@
#define PL061_GPIO_NR 8
+#ifdef CONFIG_PM
+struct pl061_context_save_regs {
+ u8 gpio_data;
+ u8 gpio_dir;
+ u8 gpio_is;
+ u8 gpio_ibe;
+ u8 gpio_iev;
+ u8 gpio_ie;
+};
+#endif
+
struct pl061_gpio {
/* We use a list of pl061_gpio structs for each trigger IRQ in the main
* interrupts controller of the system. We need this to support systems
@@ -54,6 +66,10 @@ struct pl061_gpio {
void __iomem *base;
unsigned irq_base;
struct gpio_chip gc;
+
+#ifdef CONFIG_PM
+ struct pl061_context_save_regs csave_regs;
+#endif
};
static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
@@ -330,6 +346,8 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
irq_set_chip_data(i + chip->irq_base, chip);
}
+ amba_set_drvdata(dev, chip);
+
return 0;
iounmap:
@@ -342,6 +360,53 @@ free_mem:
return ret;
}
+#ifdef CONFIG_PM
+static int pl061_suspend(struct device *dev)
+{
+ struct pl061_gpio *chip = dev_get_drvdata(dev);
+ int offset;
+
+ chip->csave_regs.gpio_data = 0;
+ chip->csave_regs.gpio_dir = readb(chip->base + GPIODIR);
+ chip->csave_regs.gpio_is = readb(chip->base + GPIOIS);
+ chip->csave_regs.gpio_ibe = readb(chip->base + GPIOIBE);
+ chip->csave_regs.gpio_iev = readb(chip->base + GPIOIEV);
+ chip->csave_regs.gpio_ie = readb(chip->base + GPIOIE);
+
+ for (offset = 0; offset < PL061_GPIO_NR; offset++) {
+ if (chip->csave_regs.gpio_dir & (1 << offset))
+ chip->csave_regs.gpio_data |=
+ pl061_get_value(&chip->gc, offset) << offset;
+ }
+
+ return 0;
+}
+
+static int pl061_resume(struct device *dev)
+{
+ struct pl061_gpio *chip = dev_get_drvdata(dev);
+ int offset;
+
+ for (offset = 0; offset < PL061_GPIO_NR; offset++) {
+ if (chip->csave_regs.gpio_dir & (1 << offset))
+ pl061_direction_output(&chip->gc, offset,
+ chip->csave_regs.gpio_data &
+ (1 << offset));
+ else
+ pl061_direction_input(&chip->gc, offset);
+ }
+
+ writeb(chip->csave_regs.gpio_is, chip->base + GPIOIS);
+ writeb(chip->csave_regs.gpio_ibe, chip->base + GPIOIBE);
+ writeb(chip->csave_regs.gpio_iev, chip->base + GPIOIEV);
+ writeb(chip->csave_regs.gpio_ie, chip->base + GPIOIE);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pl061_dev_pm_ops, pl061_suspend, pl061_resume);
+#endif
+
static struct amba_id pl061_ids[] = {
{
.id = 0x00041061,
@@ -353,6 +418,9 @@ static struct amba_id pl061_ids[] = {
static struct amba_driver pl061_gpio_driver = {
.drv = {
.name = "pl061_gpio",
+#ifdef CONFIG_PM
+ .pm = &pl061_dev_pm_ops,
+#endif
},
.id_table = pl061_ids,
.probe = pl061_probe,
--
1.7.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists