| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJhJPsWXJft13MUgj8kB4DjQdO14S25ijiZuW7geBOHhMxpx4w@mail.gmail.com>
Date: Wed, 23 Nov 2011 18:21:59 +0800
From: Kelvin Cheung <keguang.zhang@...il.com>
To: ralf@...ux-mips.org, linux-mips@...ux-mips.org,
linux-kernel@...r.kernel.org
Cc: zhzhl555@...il.com, peppe.cavallaro@...com, wuzhangjin@...il.com,
r0bertz@...too.org, Kelvin Cheung <keguang.zhang@...il.com>
Subject: Re: [PATCH V4 2/4] MIPS: Add board support for Loongson1B
Changelog:
V4:
1. Split the RTC patch, and merge the arch/mips bits into patch 2/4.
2. Use 'KSEG1ADDR' instead of 'ioremap()' in registers definitions.
2011/11/21, Kelvin Cheung <keguang.zhang@...il.com>:
> This patch adds basic platform devices for Loongson1B,
> including serial port, ethernet, rtc and interrupt handler.
>
> Loongson1B UART is compatible with NS16550A.
> Loongson1B GMAC is built around Synopsys IP Core.
>
> Use normal descriptor instead of enhanced descriptor.
> Thanks to Giuseppe for updating the normal descriptor
> in stmmac driver.
>
> Thanks to Zhao Zhang for implementing the RTC driver.
>
> Signed-off-by: Kelvin Cheung <keguang.zhang@...il.com>
> ---
> arch/mips/include/asm/mach-loongson1/irq.h | 68 +++++++++
> arch/mips/include/asm/mach-loongson1/loongson1.h | 44 ++++++
> arch/mips/include/asm/mach-loongson1/platform.h | 22 +++
> arch/mips/include/asm/mach-loongson1/prom.h | 24 +++
> arch/mips/include/asm/mach-loongson1/regs-clk.h | 33 +++++
> arch/mips/include/asm/mach-loongson1/regs-wdt.h | 22 +++
> arch/mips/include/asm/mach-loongson1/war.h | 25 ++++
> arch/mips/loongson1/common/clock.c | 165
> ++++++++++++++++++++++
> arch/mips/loongson1/common/irq.c | 146 +++++++++++++++++++
> arch/mips/loongson1/common/platform.c | 98 +++++++++++++
> arch/mips/loongson1/common/prom.c | 87 ++++++++++++
> arch/mips/loongson1/common/reset.c | 45 ++++++
> arch/mips/loongson1/common/setup.c | 29 ++++
> arch/mips/loongson1/ls1b/board.c | 32 ++++
> 14 files changed, 840 insertions(+), 0 deletions(-)
> create mode 100644 arch/mips/include/asm/mach-loongson1/irq.h
> create mode 100644 arch/mips/include/asm/mach-loongson1/loongson1.h
> create mode 100644 arch/mips/include/asm/mach-loongson1/platform.h
> create mode 100644 arch/mips/include/asm/mach-loongson1/prom.h
> create mode 100644 arch/mips/include/asm/mach-loongson1/regs-clk.h
> create mode 100644 arch/mips/include/asm/mach-loongson1/regs-wdt.h
> create mode 100644 arch/mips/include/asm/mach-loongson1/war.h
> create mode 100644 arch/mips/loongson1/common/clock.c
> create mode 100644 arch/mips/loongson1/common/irq.c
> create mode 100644 arch/mips/loongson1/common/platform.c
> create mode 100644 arch/mips/loongson1/common/prom.c
> create mode 100644 arch/mips/loongson1/common/reset.c
> create mode 100644 arch/mips/loongson1/common/setup.c
> create mode 100644 arch/mips/loongson1/ls1b/board.c
>
> diff --git a/arch/mips/include/asm/mach-loongson1/irq.h
> b/arch/mips/include/asm/mach-loongson1/irq.h
> new file mode 100644
> index 0000000..762bd2b
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/irq.h
> @@ -0,0 +1,68 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * IRQ mappings for Loongson1.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_IRQ_H
> +#define __ASM_MACH_LOONGSON1_IRQ_H
> +
> +/*
> + * CPU core Interrupt Numbers
> + */
> +#define MIPS_CPU_IRQ_BASE 0
> +#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
> +#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
> +#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
> +#define INT0_IRQ MIPS_CPU_IRQ(2)
> +#define INT1_IRQ MIPS_CPU_IRQ(3)
> +#define INT2_IRQ MIPS_CPU_IRQ(4)
> +#define INT3_IRQ MIPS_CPU_IRQ(5)
> +#define INT4_IRQ MIPS_CPU_IRQ(6)
> +#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
> +
> +/*
> + * INT0~3 Interrupt Numbers
> + */
> +#define LS1X_IRQ_BASE 8
> +#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
> +
> +#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
> +#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
> +#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
> +#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
> +#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
> +#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
> +#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
> +#define LS1X_SPI1_IRQ LS1X_IRQ(0, 9)
> +#define LS1X_AC97_IRQ LS1X_IRQ(0, 10)
> +#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
> +#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
> +#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
> +#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
> +#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
> +#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
> +#define LS1X_PWM3_IRQ LS1X_IRQ(0, 20)
> +#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
> +#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
> +#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
> +#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
> +#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
> +#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
> +#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
> +#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
> +
> +#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
> +#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
> +#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
> +#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
> +
> +#define NR_IRQS LS1X_GMAC1_IRQ
> +
> +#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h
> b/arch/mips/include/asm/mach-loongson1/loongson1.h
> new file mode 100644
> index 0000000..0440627
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
> @@ -0,0 +1,44 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * Register mappings for Loongson1.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
> +#define __ASM_MACH_LOONGSON1_LOONGSON1_H
> +
> +#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
> +
> +/* Loongson1 Register Bases */
> +#define LS1X_INTC_BASE 0x1fd01040
> +#define LS1X_EHCI_BASE 0x1fe00000
> +#define LS1X_OHCI_BASE 0x1fe08000
> +#define LS1X_GMAC0_BASE 0x1fe10000
> +#define LS1X_GMAC1_BASE 0x1fe20000
> +
> +#define LS1X_UART0_BASE 0x1fe40000
> +#define LS1X_UART1_BASE 0x1fe44000
> +#define LS1X_UART2_BASE 0x1fe48000
> +#define LS1X_UART3_BASE 0x1fe4c000
> +#define LS1X_CAN0_BASE 0x1fe50000
> +#define LS1X_CAN1_BASE 0x1fe54000
> +#define LS1X_I2C0_BASE 0x1fe58000
> +#define LS1X_I2C1_BASE 0x1fe68000
> +#define LS1X_I2C2_BASE 0x1fe70000
> +#define LS1X_PWM_BASE 0x1fe5c000
> +#define LS1X_WDT_BASE 0x1fe5c060
> +#define LS1X_RTC_BASE 0x1fe64000
> +#define LS1X_AC97_BASE 0x1fe74000
> +#define LS1X_NAND_BASE 0x1fe78000
> +#define LS1X_CLK_BASE 0x1fe78030
> +
> +#include <regs-clk.h>
> +#include <regs-wdt.h>
> +
> +#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/platform.h
> b/arch/mips/include/asm/mach-loongson1/platform.h
> new file mode 100644
> index 0000000..327df09
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/platform.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
> +#define __ASM_MACH_LOONGSON1_PLATFORM_H
> +
> +#include <linux/platform_device.h>
> +
> +extern struct platform_device ls1x_uart_device;
> +extern struct platform_device ls1x_eth0_device;
> +extern struct platform_device ls1x_rtc_device;
> +
> +void ls1x_serial_setup(void);
> +
> +#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/prom.h
> b/arch/mips/include/asm/mach-loongson1/prom.h
> new file mode 100644
> index 0000000..b871dc4
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/prom.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_PROM_H
> +#define __ASM_MACH_LOONGSON1_PROM_H
> +
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/irq.h>
> +
> +/* environment arguments from bootloader */
> +extern unsigned long memsize, highmemsize;
> +
> +/* loongson-specific command line, env and memory initialization */
> +extern char *prom_getenv(char *name);
> +extern void __init prom_init_cmdline(void);
> +
> +#endif /* __ASM_MACH_LOONGSON1_PROM_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h
> b/arch/mips/include/asm/mach-loongson1/regs-clk.h
> new file mode 100644
> index 0000000..5b9635a
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
> @@ -0,0 +1,33 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * Loongson1 Clock Register Definitions.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
> +#define __ASM_MACH_LOONGSON1_REGS_CLK_H
> +
> +#define LS1X_CLK_REG(x) \
> + ((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
> +
> +#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
> +#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
> +
> +/* Clock PLL Divisor Register Bits */
> +#define DIV_DC_EN (0x1 << 31)
> +#define DIV_DC (0x1f << 26)
> +#define DIV_CPU_EN (0x1 << 25)
> +#define DIV_CPU (0x1f << 20)
> +#define DIV_DDR_EN (0x1 << 19)
> +#define DIV_DDR (0x1f << 14)
> +
> +#define DIV_DC_SHIFT 26
> +#define DIV_CPU_SHIFT 20
> +#define DIV_DDR_SHIFT 14
> +
> +#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> new file mode 100644
> index 0000000..d339fe7
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * Loongson1 Watchdog register definitions.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
> +#define __ASM_MACH_LOONGSON1_REGS_WDT_H
> +
> +#define LS1X_WDT_REG(x) \
> + ((void __iomem *)KSEG1ADDR(LS1X_WDT_BASE + (x)))
> +
> +#define LS1X_WDT_EN LS1X_WDT_REG(0x0)
> +#define LS1X_WDT_SET LS1X_WDT_REG(0x4)
> +#define LS1X_WDT_TIMER LS1X_WDT_REG(0x8)
> +
> +#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/war.h
> b/arch/mips/include/asm/mach-loongson1/war.h
> new file mode 100644
> index 0000000..e3680a8
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/war.h
> @@ -0,0 +1,25 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General
> Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@...ux-mips.org>
> + */
> +#ifndef __ASM_MACH_LOONGSON1_WAR_H
> +#define __ASM_MACH_LOONGSON1_WAR_H
> +
> +#define R4600_V1_INDEX_ICACHEOP_WAR 0
> +#define R4600_V1_HIT_CACHEOP_WAR 0
> +#define R4600_V2_HIT_CACHEOP_WAR 0
> +#define R5432_CP0_INTERRUPT_WAR 0
> +#define BCM1250_M3_WAR 0
> +#define SIBYTE_1956_WAR 0
> +#define MIPS4K_ICACHE_REFILL_WAR 0
> +#define MIPS_CACHE_SYNC_WAR 0
> +#define TX49XX_ICACHE_INDEX_INV_WAR 0
> +#define RM9000_CDEX_SMP_WAR 0
> +#define ICACHE_REFILLS_WORKAROUND_WAR 0
> +#define R10000_LLSC_WAR 0
> +#define MIPS34K_MISSED_ITLB_WAR 0
> +
> +#endif /* __ASM_MACH_LOONGSON1_WAR_H */
> diff --git a/arch/mips/loongson1/common/clock.c
> b/arch/mips/loongson1/common/clock.c
> new file mode 100644
> index 0000000..2d98fb0
> --- /dev/null
> +++ b/arch/mips/loongson1/common/clock.c
> @@ -0,0 +1,165 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <asm/clock.h>
> +#include <asm/time.h>
> +
> +#include <loongson1.h>
> +
> +static LIST_HEAD(clocks);
> +static DEFINE_MUTEX(clocks_mutex);
> +
> +struct clk *clk_get(struct device *dev, const char *name)
> +{
> + struct clk *c;
> + struct clk *ret = NULL;
> +
> + mutex_lock(&clocks_mutex);
> + list_for_each_entry(c, &clocks, node) {
> + if (!strcmp(c->name, name)) {
> + ret = c;
> + break;
> + }
> + }
> + mutex_unlock(&clocks_mutex);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(clk_get);
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> + return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_get_rate);
> +
> +static void pll_clk_init(struct clk *clk)
> +{
> + u32 pll;
> +
> + pll = __raw_readl(LS1X_CLK_PLL_FREQ);
> + clk->rate = (12 + (pll & 0x3f)) * 33 / 2
> + + ((pll >> 8) & 0x3ff) * 33 / 1024 / 2;
> + clk->rate *= 1000000;
> +}
> +
> +static void cpu_clk_init(struct clk *clk)
> +{
> + u32 pll, ctrl;
> +
> + pll = clk_get_rate(clk->parent);
> + ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_CPU;
> + clk->rate = pll / (ctrl >> DIV_CPU_SHIFT);
> +}
> +
> +static void ddr_clk_init(struct clk *clk)
> +{
> + u32 pll, ctrl;
> +
> + pll = clk_get_rate(clk->parent);
> + ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_DDR;
> + clk->rate = pll / (ctrl >> DIV_DDR_SHIFT);
> +}
> +
> +static void dc_clk_init(struct clk *clk)
> +{
> + u32 pll, ctrl;
> +
> + pll = clk_get_rate(clk->parent);
> + ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_DC;
> + clk->rate = pll / (ctrl >> DIV_DC_SHIFT);
> +}
> +
> +static struct clk_ops pll_clk_ops = {
> + .init = pll_clk_init,
> +};
> +
> +static struct clk_ops cpu_clk_ops = {
> + .init = cpu_clk_init,
> +};
> +
> +static struct clk_ops ddr_clk_ops = {
> + .init = ddr_clk_init,
> +};
> +
> +static struct clk_ops dc_clk_ops = {
> + .init = dc_clk_init,
> +};
> +
> +static struct clk pll_clk = {
> + .name = "pll",
> + .ops = &pll_clk_ops,
> +};
> +
> +static struct clk cpu_clk = {
> + .name = "cpu",
> + .parent = &pll_clk,
> + .ops = &cpu_clk_ops,
> +};
> +
> +static struct clk ddr_clk = {
> + .name = "ddr",
> + .parent = &pll_clk,
> + .ops = &ddr_clk_ops,
> +};
> +
> +static struct clk dc_clk = {
> + .name = "dc",
> + .parent = &pll_clk,
> + .ops = &dc_clk_ops,
> +};
> +
> +int clk_register(struct clk *clk)
> +{
> + mutex_lock(&clocks_mutex);
> + list_add(&clk->node, &clocks);
> + if (clk->ops->init)
> + clk->ops->init(clk);
> + mutex_unlock(&clocks_mutex);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(clk_register);
> +
> +static struct clk *ls1x_clks[] = {
> + &pll_clk,
> + &cpu_clk,
> + &ddr_clk,
> + &dc_clk,
> +};
> +
> +int __init ls1x_clock_init(void)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ls1x_clks); i++)
> + clk_register(ls1x_clks[i]);
> +
> + return 0;
> +}
> +
> +void __init plat_time_init(void)
> +{
> + struct clk *clk;
> +
> + /* Initialize LS1X clocks */
> + ls1x_clock_init();
> +
> + /* setup mips r4k timer */
> + clk = clk_get(NULL, "cpu");
> + if (IS_ERR(clk))
> + panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
> +
> + mips_hpt_frequency = clk_get_rate(clk) / 2;
> +}
> diff --git a/arch/mips/loongson1/common/irq.c
> b/arch/mips/loongson1/common/irq.c
> new file mode 100644
> index 0000000..5465baf
> --- /dev/null
> +++ b/arch/mips/loongson1/common/irq.c
> @@ -0,0 +1,146 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <asm/irq_cpu.h>
> +
> +#include <loongson1.h>
> +#include <irq.h>
> +
> +#define LS1X_INTC_REG(n, x) \
> + ((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
> +
> +#define LS1X_INTC_INTISR(n) LS1X_INTC_REG(n, 0x0)
> +#define LS1X_INTC_INTIEN(n) LS1X_INTC_REG(n, 0x4)
> +#define LS1X_INTC_INTSET(n) LS1X_INTC_REG(n, 0x8)
> +#define LS1X_INTC_INTCLR(n) LS1X_INTC_REG(n, 0xc)
> +#define LS1X_INTC_INTPOL(n) LS1X_INTC_REG(n, 0x10)
> +#define LS1X_INTC_INTEDGE(n) LS1X_INTC_REG(n, 0x14)
> +
> +static void ls1x_irq_ack(struct irq_data *d)
> +{
> + unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> + unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> + __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
> + | (1 << bit), LS1X_INTC_INTCLR(n));
> +}
> +
> +static void ls1x_irq_mask(struct irq_data *d)
> +{
> + unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> + unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> + __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
> + & ~(1 << bit), LS1X_INTC_INTIEN(n));
> +}
> +
> +static void ls1x_irq_mask_ack(struct irq_data *d)
> +{
> + unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> + unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> + __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
> + & ~(1 << bit), LS1X_INTC_INTIEN(n));
> + __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
> + | (1 << bit), LS1X_INTC_INTCLR(n));
> +}
> +
> +static void ls1x_irq_unmask(struct irq_data *d)
> +{
> + unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> + unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> + __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
> + | (1 << bit), LS1X_INTC_INTIEN(n));
> +}
> +
> +static struct irq_chip ls1x_irq_chip = {
> + .name = "LS1X-INTC",
> + .irq_ack = ls1x_irq_ack,
> + .irq_mask = ls1x_irq_mask,
> + .irq_mask_ack = ls1x_irq_mask_ack,
> + .irq_unmask = ls1x_irq_unmask,
> +};
> +
> +static void ls1x_irq_dispatch(int n)
> +{
> + u32 int_status, irq;
> +
> + /* Get pending sources, masked by current enables */
> + int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
> + __raw_readl(LS1X_INTC_INTIEN(n));
> +
> + if (int_status) {
> + irq = LS1X_IRQ(n, __ffs(int_status));
> + do_IRQ(irq);
> + }
> +}
> +
> +asmlinkage void plat_irq_dispatch(void)
> +{
> + unsigned int pending;
> +
> + pending = read_c0_cause() & read_c0_status() & ST0_IM;
> +
> + if (pending & CAUSEF_IP7)
> + do_IRQ(TIMER_IRQ);
> + else if (pending & CAUSEF_IP2)
> + ls1x_irq_dispatch(0); /* INT0 */
> + else if (pending & CAUSEF_IP3)
> + ls1x_irq_dispatch(1); /* INT1 */
> + else if (pending & CAUSEF_IP4)
> + ls1x_irq_dispatch(2); /* INT2 */
> + else if (pending & CAUSEF_IP5)
> + ls1x_irq_dispatch(3); /* INT3 */
> + else if (pending & CAUSEF_IP6)
> + ls1x_irq_dispatch(4); /* INT4 */
> + else
> + spurious_interrupt();
> +
> +}
> +
> +struct irqaction cascade_irqaction = {
> + .handler = no_action,
> + .name = "cascade",
> + .flags = IRQF_NO_THREAD,
> +};
> +
> +static void __init ls1x_irq_init(int base)
> +{
> + int n;
> +
> + /* Disable interrupts and clear pending,
> + * setup all IRQs as high level triggered
> + */
> + for (n = 0; n < 4; n++) {
> + __raw_writel(0x0, LS1X_INTC_INTIEN(n));
> + __raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
> + __raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
> + __raw_writel(0x0, LS1X_INTC_INTEDGE(n));
> + }
> +
> +
> + for (n = base; n < NR_IRQS; n++) {
> + irq_set_chip_and_handler(n, &ls1x_irq_chip,
> + handle_level_irq);
> + }
> +
> + setup_irq(INT0_IRQ, &cascade_irqaction);
> + setup_irq(INT1_IRQ, &cascade_irqaction);
> + setup_irq(INT2_IRQ, &cascade_irqaction);
> + setup_irq(INT3_IRQ, &cascade_irqaction);
> +}
> +
> +void __init arch_init_irq(void)
> +{
> + mips_cpu_irq_init();
> + ls1x_irq_init(LS1X_IRQ_BASE);
> +}
> diff --git a/arch/mips/loongson1/common/platform.c
> b/arch/mips/loongson1/common/platform.c
> new file mode 100644
> index 0000000..08c8a39
> --- /dev/null
> +++ b/arch/mips/loongson1/common/platform.c
> @@ -0,0 +1,98 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/phy.h>
> +#include <linux/serial_8250.h>
> +#include <linux/stmmac.h>
> +#include <asm-generic/sizes.h>
> +
> +#include <loongson1.h>
> +
> +#define LS1X_UART(_id) \
> + { \
> + .mapbase = LS1X_UART ## _id ## _BASE, \
> + .irq = LS1X_UART ## _id ## _IRQ, \
> + .iotype = UPIO_MEM, \
> + .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
> + .type = PORT_16550A, \
> + }
> +
> +static struct plat_serial8250_port ls1x_serial8250_port[] = {
> + LS1X_UART(0),
> + LS1X_UART(1),
> + LS1X_UART(2),
> + LS1X_UART(3),
> + {},
> +};
> +
> +struct platform_device ls1x_uart_device = {
> + .name = "serial8250",
> + .id = PLAT8250_DEV_PLATFORM,
> + .dev = {
> + .platform_data = ls1x_serial8250_port,
> + },
> +};
> +
> +void __init ls1x_serial_setup(void)
> +{
> + struct clk *clk;
> + struct plat_serial8250_port *p;
> +
> + clk = clk_get(NULL, "dc");
> + if (IS_ERR(clk))
> + panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
> +
> + for (p = ls1x_serial8250_port; p->flags != 0; ++p)
> + p->uartclk = clk_get_rate(clk);
> +}
> +
> +/* Synopsys Ethernet GMAC */
> +static struct resource ls1x_eth0_resources[] = {
> + [0] = {
> + .start = LS1X_GMAC0_BASE,
> + .end = LS1X_GMAC0_BASE + SZ_64K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .name = "macirq",
> + .start = LS1X_GMAC0_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
> + .bus_id = 0,
> + .phy_mask = 0,
> +};
> +
> +static struct plat_stmmacenet_data ls1x_eth_data = {
> + .bus_id = 0,
> + .phy_addr = -1,
> + .mdio_bus_data = &ls1x_mdio_bus_data,
> + .pbl = 32,
> + .has_gmac = 1,
> + .tx_coe = 1,
> +};
> +
> +struct platform_device ls1x_eth0_device = {
> + .name = "stmmaceth",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
> + .resource = ls1x_eth0_resources,
> + .dev = {
> + .platform_data = &ls1x_eth_data,
> + },
> +};
> +
> +struct platform_device ls1x_rtc_device = {
> + .name = "ls1x-rtc",
> + .id = -1,
> +};
> diff --git a/arch/mips/loongson1/common/prom.c
> b/arch/mips/loongson1/common/prom.c
> new file mode 100644
> index 0000000..57f88ea
> --- /dev/null
> +++ b/arch/mips/loongson1/common/prom.c
> @@ -0,0 +1,87 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * Modified from arch/mips/pnx833x/common/prom.c.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/serial_reg.h>
> +#include <asm/bootinfo.h>
> +
> +#include <loongson1.h>
> +#include <prom.h>
> +
> +int prom_argc;
> +char **prom_argv, **prom_envp;
> +unsigned long memsize, highmemsize;
> +
> +char *prom_getenv(char *envname)
> +{
> + char **env = prom_envp;
> + int i;
> +
> + i = strlen(envname);
> +
> + while (*env) {
> + if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
> + return *env + i + 1;
> + env++;
> + }
> +
> + return 0;
> +}
> +
> +static inline unsigned long env_or_default(char *env, unsigned long dfl)
> +{
> + char *str = prom_getenv(env);
> + return str ? simple_strtol(str, 0, 0) : dfl;
> +}
> +
> +void __init prom_init_cmdline(void)
> +{
> + char *c = &(arcs_cmdline[0]);
> + int i;
> +
> + for (i = 1; i < prom_argc; i++) {
> + strcpy(c, prom_argv[i]);
> + c += strlen(prom_argv[i]);
> + if (i < prom_argc-1)
> + *c++ = ' ';
> + }
> + *c = 0;
> +}
> +
> +void __init prom_init(void)
> +{
> + prom_argc = fw_arg0;
> + prom_argv = (char **)fw_arg1;
> + prom_envp = (char **)fw_arg2;
> +
> + prom_init_cmdline();
> +
> + memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
> + highmemsize = env_or_default("highmemsize", 0x0);
> +}
> +
> +void __init prom_free_prom_memory(void)
> +{
> +}
> +
> +#define PORT(offset) (u8 *)KSEG1ADDR(LS1X_UART0_BASE + offset)
> +
> +void __init prom_putchar(char c)
> +{
> + int timeout;
> +
> + timeout = 1024;
> +
> + while (((readb(PORT(UART_LSR)) & UART_LSR_THRE) == 0)
> + && (timeout-- > 0))
> + ;
> +
> + writeb(c, PORT(UART_TX));
> +}
> diff --git a/arch/mips/loongson1/common/reset.c
> b/arch/mips/loongson1/common/reset.c
> new file mode 100644
> index 0000000..fb979a7
> --- /dev/null
> +++ b/arch/mips/loongson1/common/reset.c
> @@ -0,0 +1,45 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/pm.h>
> +#include <asm/reboot.h>
> +
> +#include <loongson1.h>
> +
> +static void ls1x_restart(char *command)
> +{
> + __raw_writel(0x1, LS1X_WDT_EN);
> + __raw_writel(0x5000000, LS1X_WDT_TIMER);
> + __raw_writel(0x1, LS1X_WDT_SET);
> +}
> +
> +static void ls1x_halt(void)
> +{
> + while (1) {
> + if (cpu_wait)
> + cpu_wait();
> + }
> +}
> +
> +static void ls1x_power_off(void)
> +{
> + ls1x_halt();
> +}
> +
> +static int __init ls1x_reboot_setup(void)
> +{
> + _machine_restart = ls1x_restart;
> + _machine_halt = ls1x_halt;
> + pm_power_off = ls1x_power_off;
> +
> + return 0;
> +}
> +
> +arch_initcall(ls1x_reboot_setup);
> diff --git a/arch/mips/loongson1/common/setup.c
> b/arch/mips/loongson1/common/setup.c
> new file mode 100644
> index 0000000..62128cc
> --- /dev/null
> +++ b/arch/mips/loongson1/common/setup.c
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <asm/bootinfo.h>
> +
> +#include <prom.h>
> +
> +void __init plat_mem_setup(void)
> +{
> + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
> +}
> +
> +const char *get_system_type(void)
> +{
> + unsigned int processor_id = (¤t_cpu_data)->processor_id;
> +
> + switch (processor_id & PRID_REV_MASK) {
> + case PRID_REV_LOONGSON1B:
> + return "LOONGSON LS1B";
> + default:
> + return "LOONGSON (unknown)";
> + }
> +}
> diff --git a/arch/mips/loongson1/ls1b/board.c
> b/arch/mips/loongson1/ls1b/board.c
> new file mode 100644
> index 0000000..7aaebff
> --- /dev/null
> +++ b/arch/mips/loongson1/ls1b/board.c
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <platform.h>
> +
> +#include <linux/serial_8250.h>
> +#include <loongson1.h>
> +
> +static struct platform_device *ls1b_platform_devices[] __initdata = {
> + &ls1x_uart_device,
> + &ls1x_eth0_device,
> + &ls1x_rtc_device,
> +};
> +
> +static int __init ls1b_platform_init(void)
> +{
> + int err;
> +
> + ls1x_serial_setup();
> +
> + err = platform_add_devices(ls1b_platform_devices,
> + ARRAY_SIZE(ls1b_platform_devices));
> + return err;
> +}
> +
> +arch_initcall(ls1b_platform_init);
> --
> 1.7.1
>
>
--
Best Regards!
Kelvin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists