Initializing cgroup subsys cpu Linux version 3.2.0-rc2+ (pavel@amd) (gcc version 4.4.5 (Debian 4.4.5-6) ) #191 SMP Tue Nov 22 12:35:52 CET 2011 Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data) BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI present. DMI: LENOVO 17097HU/17097HU, BIOS 7BETD3WW (2.14 ) 10/04/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DBFFF uncachable DC000-DFFFF write-back E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01400000 Base memory trampoline at [c009b000] 9b000 size 16384 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 131f000-1400000 ACPI: RSDP 000f67c0 00024 (v02 LENOVO) ACPI: XSDT 7f6d191c 00084 (v01 LENOVO TP-7B 00002140 LTP 00000000) ACPI: FACP 7f6d1a00 000F4 (v03 LENOVO TP-7B 00002140 LNVO 00000001) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110623/tbfadt-529) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110623/tbfadt-560) ACPI: DSDT 7f6d1d90 0CFB9 (v01 LENOVO TP-7B 00002140 MSFT 0100000E) ACPI: FACS 7f6f4000 00040 ACPI: SSDT 7f6d1bb4 001DC (v01 LENOVO TP-7B 00002140 MSFT 0100000E) ACPI: ECDT 7f6ded49 00052 (v01 LENOVO TP-7B 00002140 LNVO 00000001) ACPI: TCPA 7f6ded9b 00032 (v02 LENOVO TP-7B 00002140 LNVO 00000001) ACPI: APIC 7f6dedcd 00068 (v01 LENOVO TP-7B 00002140 LNVO 00000001) ACPI: MCFG 7f6dee35 0003C (v01 LENOVO TP-7B 00002140 LNVO 00000001) ACPI: HPET 7f6dee71 00038 (v01 LENOVO TP-7B 00002140 LNVO 00000001) ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-7B 00002140 LTP 00000001) ACPI: SSDT 7f6f2645 0025F (v01 LENOVO TP-7B 00002140 INTL 20050513) ACPI: SSDT 7f6f28a4 000A6 (v01 LENOVO TP-7B 00002140 INTL 20050513) ACPI: SSDT 7f6f294a 004F7 (v01 LENOVO TP-7B 00002140 INTL 20050513) ACPI: SSDT 7f6f2e41 001D8 (v01 LENOVO TP-7B 00002140 INTL 20050513) ACPI: Local APIC address 0xfee00000 1150MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f6d0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007f6d0 On node 0 totalpages: 521823 free_area_init_node: node 0, pgdat c0b52a40, node_mem_map f680d200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2302 pages used for memmap HighMem zone: 292308 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @f6000000 s25536 r0 d23616 u2097152 pcpu-alloc: s25536 r0 d23616 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745 Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-good/arch/i386/boot/bzImage root=/dev/sda4 resume=/dev/sda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps init=/tmp/swsusp-init acpi_sleep=s3_bios,s3_mode no_console_suspend i915.modeset=1 video=inteldrmfb:mode=1024x768 fbcon=scrollback:64k irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007f6d0) Memory: 2053896k/2087744k available (6562k kernel code, 33396k reserved, 3076k data, 432k init, 1178440k highmem) virtual kernel memory layout: fixmap : 0xffe6f000 - 0xfffff000 (1600 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0b6a000 - 0xc0bd6000 ( 432 kB) .data : 0xc0868844 - 0xc0b69c00 (3076 kB) .text : 0xc0200000 - 0xc0868844 (6562 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:2304 nr_irqs:512 16 CPU 0 irqstacks, hard=f5c18000 soft=f5c1a000 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3551 kB per task-struct memory footprint: 1152 bytes ODEBUG: 4 of 4 active objects replaced hpet clockevent registered Fast TSC calibration using PIT Detected 1828.638 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.27 BogoMIPS (lpj=7314552) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. ACPI: Core revision 20110623 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Performance Events: Core events, core PMU driver. ... version: 1 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 NMI watchdog enabled, takes one hw-pmu counter. lockdep: fixing up alternatives. CPU 1 irqstacks, hard=f5d66000 soft=f5d68000 Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Disabled fast string operations TSC synchronization [CPU#0 -> CPU#1]: Measured 579821 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed NMI watchdog enabled, takes one hw-pmu counter. Brought up 2 CPUs Total of 2 processors activated (7314.84 BogoMIPS). PM: Registering ACPI NVS region at 7f6df000 (135168 bytes) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: EC description table is found, configuring boot EC ACPI: SSDT 7f6f1d26 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 7f6f1feb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) ACPI: SSDT 7f6f1c5e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 7f6f1f66 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [PUBS] (on) ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: ACPI Dock Station Driver: 3 docks/bays found HEST: Table not found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff] (ignored) pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600 pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xee100000-0xee17ffff] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: reg 1c: [mem 0xee200000-0xee23ffff] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0xee180000-0xee1fffff] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xee240000-0xee243fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xee444000-0xee4443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf] pci 0000:00:1f.2: reg 24: [mem 0xee444400-0xee4447ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff] pci 0000:02:00.0: [8086:109a] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff] pci 0000:02:00.0: reg 18: [io 0x2000-0x201f] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] pci 0000:03:00.0: [8086:4227] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607 pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled pci 0000:15:00.1: [1180:0552] type 0 class 0x000c00 pci 0000:15:00.1: reg 10: [mem 0xe4301000-0xe43017ff] pci 0000:15:00.1: PME# supported from D0 D3hot D3cold pci 0000:15:00.1: PME# disabled pci 0000:15:00.2: [1180:0822] type 0 class 0x000805 pci 0000:15:00.2: reg 10: [mem 0xe4301800-0xe43018ff] pci 0000:15:00.2: supports D1 D2 pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.2: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f000 - 000000000009ffff reserve RAM buffer: 000000007f6d0000 - 000000007fffffff Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000c0000-0x000c3fff] pnp 00:00: [mem 0x000c4000-0x000c7fff] pnp 00:00: [mem 0x000c8000-0x000cbfff] pnp 00:00: [mem 0x000cc000-0x000cffff] pnp 00:00: [mem 0x000d0000-0x000d3fff] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] pnp 00:00: [mem 0x000dc000-0x000dffff] pnp 00:00: [mem 0x000e0000-0x000e3fff] pnp 00:00: [mem 0x000e4000-0x000e7fff] pnp 00:00: [mem 0x000e8000-0x000ebfff] pnp 00:00: [mem 0x000ec000-0x000effff] pnp 00:00: [mem 0x000f0000-0x000fffff] pnp 00:00: [mem 0x00100000-0x7fffffff] pnp 00:00: [mem 0xfec00000-0xfed3ffff] pnp 00:00: [mem 0xfed41000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved system 00:00: [mem 0x000ec000-0x000effff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0x000c0000-0x000c3fff window] pnp 00:01: [mem 0x000c4000-0x000c7fff window] pnp 00:01: [mem 0x000c8000-0x000cbfff window] pnp 00:01: [mem 0x000cc000-0x000cffff window] pnp 00:01: [mem 0x000d0000-0x000d3fff window] pnp 00:01: [mem 0x000d4000-0x000d7fff window] pnp 00:01: [mem 0x000d8000-0x000dbfff window] pnp 00:01: [mem 0x000dc000-0x000dffff window] pnp 00:01: [mem 0x000e0000-0x000e3fff window] pnp 00:01: [mem 0x000e4000-0x000e7fff window] pnp 00:01: [mem 0x000e8000-0x000ebfff window] pnp 00:01: [mem 0x000ec000-0x000effff window] pnp 00:01: [mem 0x80000000-0xfebfffff window] pnp 00:01: [mem 0xfed40000-0xfed40fff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: [io 0x0010-0x001f] pnp 00:02: [io 0x0090-0x009f] pnp 00:02: [io 0x0024-0x0025] pnp 00:02: [io 0x0028-0x0029] pnp 00:02: [io 0x002c-0x002d] pnp 00:02: [io 0x0030-0x0031] pnp 00:02: [io 0x0034-0x0035] pnp 00:02: [io 0x0038-0x0039] pnp 00:02: [io 0x003c-0x003d] pnp 00:02: [io 0x00a4-0x00a5] pnp 00:02: [io 0x00a8-0x00a9] pnp 00:02: [io 0x00ac-0x00ad] pnp 00:02: [io 0x00b0-0x00b5] pnp 00:02: [io 0x00b8-0x00b9] pnp 00:02: [io 0x00bc-0x00bd] pnp 00:02: [io 0x0050-0x0053] pnp 00:02: [io 0x0072-0x0077] pnp 00:02: [io 0x164e-0x164f] pnp 00:02: [io 0x002e-0x002f] pnp 00:02: [io 0x1000-0x107f] pnp 00:02: [io 0x1180-0x11bf] pnp 00:02: [io 0x0800-0x080f] pnp 00:02: [io 0x15e0-0x15ef] pnp 00:02: [io 0x1600-0x165f] pnp 00:02: [mem 0xf0000000-0xf3ffffff] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] pnp 00:02: [mem 0xfed14000-0xfed17fff] pnp 00:02: [mem 0xfed18000-0xfed18fff] pnp 00:02: [mem 0xfed19000-0xfed19fff] system 00:02: [io 0x164e-0x164f] has been reserved system 00:02: [io 0x1000-0x107f] has been reserved system 00:02: [io 0x1180-0x11bf] has been reserved system 00:02: [io 0x0800-0x080f] has been reserved system 00:02: [io 0x15e0-0x15ef] has been reserved system 00:02: [io 0x1600-0x165f] could not be reserved system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x0070-0x0071] pnp 00:07: [irq 8] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] pnp 00:08: [irq 1] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: [irq 12] pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) pnp 00:0a: [io 0x02f8-0x02ff] pnp 00:0a: [irq 3] pnp 00:0a: [dma 3] pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active) pnp 00:0b: [mem 0xfed40000-0xfed40fff] pnp 00:0b: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] pci 0000:15:00.0: BAR 10: assigned [mem 0x84000000-0x87ffffff] pci 0000:15:00.0: BAR 9: assigned [mem 0xe0000000-0xe3ffffff pref] pci 0000:15:00.0: BAR 8: assigned [io 0x9000-0x90ff] pci 0000:15:00.0: BAR 7: assigned [io 0x9400-0x94ff] pci 0000:15:00.0: CardBus bridge to [bus 16-17] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff] pci 0000:00:1e.0: PCI bridge to [bus 15-18] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:15:00.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref] pci_bus 0000:15: resource 4 [io 0x0000-0xffff] pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:16: resource 0 [io 0x9400-0x94ff] pci_bus 0000:16: resource 1 [io 0x9000-0x90ff] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref] pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.3: Performing full reset PCI: CLS 64 bytes, default 64 Simple Boot Flag at 0x35 set to 0x1 highmem bounce pool size: 64 pages msgmni has been set to 1709 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.3: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 14 ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] acpi device:02: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (43 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (43 C) ERST: Table is not found! ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT0] (battery absent) GHES: HEST is not enabled! ERST DBG: ERST support is disabled. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A lp: driver loaded but no devices found Non-volatile memory driver v1.3 intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support fbcon: inteldrmfb (fb0) is primary device [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync) Console: switching to colour frame buffer device 102x42 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 loop: module loaded nbd: registered device at major 43 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata6: port disabled--ignoring tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k e1000e: Copyright(c) 1999 - 2011 Intel Corporation. e1000e 0000:02:00.0: Disabling ASPM L0s L1 e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: (unregistered net_device): Failed to initialize MSI interrupts. Falling back to legacy interrupts. e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:25:19:04 e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s iwl3945: Copyright(c) 2003-2011 Intel Corporation iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:03:00.0: setting latency timer to 64 iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus cdc_ncm: 04-Aug-2011 usbcore: registered new interface driver cdc_ncm yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:201c] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda4 sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:15:00.0: Socket status: 30000006 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: reset command 0080022 (park)=0 ithresh=8 Async period=1024 Reset HALT ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.2.0-rc2+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.2.0-rc2+ uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 usb usb3: default language 0x0409 usb usb3: udev 1, busnum 3, minor = 256 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.2.0-rc2+ uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: default language 0x0409 usb usb4: udev 1, busnum 4, minor = 384 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.2.0-rc2+ uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb5: default language 0x0409 usb usb5: udev 1, busnum 5, minor = 512 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.2.0-rc2+ uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT hub 1-0:1.0: port 7: status 0501 change 0001 ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT hub 1-0:1.0: port 8: status 0501 change 0001 usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver usbserial USB Serial support registered for generic hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver driver ftdi-elan usbcore: registered new interface driver ftdi-elan hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input4 rtc_cmos 00:07: RTC can wake from S4 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) md: raid0 personality registered for level 0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 md: raid1 personality registered for level 1 hub 1-0:1.0: state 7 ports 8 chg 0180 evt 0000 hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com Bluetooth: HCI UART driver ver 2.2 uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb EDAC MC: Ver: 2.1.0 cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18) sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver ehci_hcd 0000:00:1d.7: port 7 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT hub 1-0:1.0: port 7 not reset yet, waiting 50ms thinkpad_acpi: ThinkPad ACPI Extras v0.24 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7BETD3WW (2.14 ), EC 7BHT40WW-1.13 thinkpad_acpi: Lenovo ThinkPad X60, model 17097HU thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features thinkpad_acpi: detected a 8-level brightness capable ThinkPad thinkpad_acpi: ACPI backlight control delay disabled thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby Registered led device: tpacpi::dock_status1 Registered led device: tpacpi::dock_status2 Registered led device: tpacpi::unknown_led2 Registered led device: tpacpi::unknown_led3 Registered led device: tpacpi::thinkvantage thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s thinkpad_acpi: Standard ACPI backlight interface available, not loading native one thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:2010 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 ehci_hcd 0000:00:1d.7: port 8 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT hub 1-0:1.0: port 8 not reset yet, waiting 50ms usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA Intel at 0xee240000 irq 17 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast mmc0: new SD card at address 913e Bluetooth: HIDP (Human Interface Emulation) ver 1.2 mmcblk0: mmc0:913e SU01G 968 MiB lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' Using IPI No-Shortcut mode mmcblk0: p1 ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100 hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s PM: Checking hibernation image partition /dev/sda1 PM: Hibernation image partition 8:1 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. rtc_cmos 00:07: setting system clock to 2011-11-23 09:28:21 UTC (1322040501) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 EXT3-fs (sda4): recovery required on readonly filesystem EXT3-fs (sda4): write access will be enabled during recovery usb 5-1: new full-speed USB device number 2 using uhci_hcd usb 5-1: skipped 1 descriptor after interface usb 5-1: default language 0x0409 usb 5-1: udev 2, busnum 5, minor = 513 usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: BCM2045B usb 5-1: Manufacturer: Broadcom Corp usb 5-1: usb_probe_device usb 5-1: configuration #1 chosen from 1 choice usb 5-1: adding 5-1:1.0 (config #1, interface 0) usbserial_generic 5-1:1.0: usb_probe_interface usbserial_generic 5-1:1.0: usb_probe_interface - got id btusb 5-1:1.0: usb_probe_interface btusb 5-1:1.0: usb_probe_interface - got id uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us usb 5-1: adding 5-1:1.1 (config #1, interface 1) usb 5-1: adding 5-1:1.2 (config #1, interface 2) usbserial_generic 5-1:1.2: usb_probe_interface usbserial_generic 5-1:1.2: usb_probe_interface - got id btusb 5-1:1.2: usb_probe_interface btusb 5-1:1.2: usb_probe_interface - got id usb 5-1: adding 5-1:1.3 (config #1, interface 3) usbserial_generic 5-1:1.3: usb_probe_interface usbserial_generic 5-1:1.3: usb_probe_interface - got id btusb 5-1:1.3: usb_probe_interface btusb 5-1:1.3: usb_probe_interface - got id drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00 hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 usb usb2: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) usb 5-2: new full-speed USB device number 3 using uhci_hcd usb 5-2: ep0 maxpacket = 8 usb 5-2: default language 0x0409 usb 5-2: udev 3, busnum 5, minor = 514 usb 5-2: New USB device found, idVendor=0483, idProduct=2016 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Biometric Coprocessor usb 5-2: Manufacturer: STMicroelectronics usb 5-2: usb_probe_device usb 5-2: configuration #1 chosen from 1 choice usb 5-2: adding 5-2:1.0 (config #1, interface 0) usbserial_generic 5-2:1.0: usb_probe_interface usbserial_generic 5-2:1.0: usb_probe_interface - got id drivers/usb/core/inode.c: creating file '003' hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb4: suspend_rh (auto-stop) hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend, wakeup 1 usb usb2: suspend_rh hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend, wakeup 1 usb usb3: suspend_rh hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend, wakeup 1 usb usb4: suspend_rh hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend, wakeup 1 ehci_hcd 0000:00:1d.7: suspend root hub uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us kjournald starting. Commit interval 5 seconds EXT3-fs (sda4): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 366253 ext3_orphan_cleanup: deleting unreferenced inode 550714 ext3_orphan_cleanup: deleting unreferenced inode 550713 ext3_orphan_cleanup: deleting unreferenced inode 550712 ext3_orphan_cleanup: deleting unreferenced inode 550711 ext3_orphan_cleanup: deleting unreferenced inode 550710 ext3_orphan_cleanup: deleting unreferenced inode 550709 ext3_orphan_cleanup: deleting unreferenced inode 550708 ext3_orphan_cleanup: deleting unreferenced inode 550707 ext3_orphan_cleanup: deleting unreferenced inode 550706 ext3_orphan_cleanup: deleting unreferenced inode 550705 ext3_orphan_cleanup: deleting unreferenced inode 550704 ext3_orphan_cleanup: deleting unreferenced inode 550703 ext3_orphan_cleanup: deleting unreferenced inode 550702 ext3_orphan_cleanup: deleting unreferenced inode 550701 ext3_orphan_cleanup: deleting unreferenced inode 550700 ext3_orphan_cleanup: deleting unreferenced inode 550699 ext3_orphan_cleanup: deleting unreferenced inode 550698 ext3_orphan_cleanup: deleting unreferenced inode 550697 ext3_orphan_cleanup: deleting unreferenced inode 550696 ext3_orphan_cleanup: deleting unreferenced inode 550695 ext3_orphan_cleanup: deleting unreferenced inode 550694 ext3_orphan_cleanup: deleting unreferenced inode 638821 ext3_orphan_cleanup: deleting unreferenced inode 550692 ext3_orphan_cleanup: deleting unreferenced inode 550691 ext3_orphan_cleanup: deleting unreferenced inode 550690 ext3_orphan_cleanup: deleting unreferenced inode 638820 ext3_orphan_cleanup: deleting unreferenced inode 369608 ext3_orphan_cleanup: deleting unreferenced inode 366786 ext3_orphan_cleanup: deleting unreferenced inode 366785 ext3_orphan_cleanup: deleting unreferenced inode 550689 ext3_orphan_cleanup: deleting unreferenced inode 550688 ext3_orphan_cleanup: deleting unreferenced inode 550687 ext3_orphan_cleanup: deleting unreferenced inode 550686 ext3_orphan_cleanup: deleting unreferenced inode 638818 ext3_orphan_cleanup: deleting unreferenced inode 638817 ext3_orphan_cleanup: deleting unreferenced inode 638816 ext3_orphan_cleanup: deleting unreferenced inode 638815 ext3_orphan_cleanup: deleting unreferenced inode 638809 ext3_orphan_cleanup: deleting unreferenced inode 638700 ext3_orphan_cleanup: deleting unreferenced inode 636601 ext3_orphan_cleanup: deleting unreferenced inode 366252 ext3_orphan_cleanup: deleting unreferenced inode 366193 ext3_orphan_cleanup: deleting unreferenced inode 580760 EXT3-fs (sda4): 44 orphan inodes deleted EXT3-fs (sda4): recovery complete EXT3-fs (sda4): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:4. debug: unmapping init memory c0b6a000..c0bd6000 Write protecting the kernel text: 6564k Write protecting the kernel read-only data: 2644k Failed to execute /tmp/swsusp-init. Attempting defaults... EXT3-fs (sda4): using internal journal Adding 779148k swap on /dev/sda1. Priority:-1 extents:1 across:779148k kjournald starting. Commit interval 5 seconds EXT3-fs (sda2): using internal journal EXT3-fs (sda2): mounted filesystem with ordered data mode sshd (1840): /proc/1840/oom_adj is deprecated, please use /proc/1840/oom_score_adj instead. coda_read_super: Bad mount data coda_read_super: device index: 0 coda_read_super: rootfid is (01234567.ffffffff.08051b18.00000000) coda: Unexpected interruption. Failure of coda_cnode_make for root: error -4 iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 wlan0: authenticate with 00:11:95:05:30:d7 (try 1) wlan0: authenticated wlan0: associate with 00:11:95:05:30:d7 (try 1) wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=13) wlan0: associated CE: hpet increased min_delta_ns to 20113 nsec mmc0: card 913e removed PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... wlan0: deauthenticated from 00:11:95:05:30:d7 (Reason: 3) cfg80211: Calling CRDA to update world regulatory domain done (allocated 410717 pages) PM: Allocated 1642868 kbytes in 6.83 seconds (240.53 MB/s) Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. hub 5-0:1.0: hub_suspend usb usb5: bus suspend, wakeup 0 usb usb5: suspend_rh sd 0:0:0:0: [sda] Synchronizing SCSI cache ------------[ cut here ]------------ WARNING: at drivers/pci/pci-driver.c:607 pci_has_legacy_pm_support+0x2d/0x60() Hardware name: 17097HU Modules linked in: Pid: 9881, comm: kworker/u:4 Not tainted 3.2.0-rc2+ #191 Call Trace: [] warn_slowpath_common+0x6d/0xa0 [] ? pci_has_legacy_pm_support+0x2d/0x60 [] ? pci_has_legacy_pm_support+0x2d/0x60 [] warn_slowpath_null+0x1d/0x20 [] pci_has_legacy_pm_support+0x2d/0x60 [] pci_pm_freeze+0x2c/0xa0 [] ? pci_pm_poweroff+0xa0/0xa0 [] pm_op+0x151/0x1d0 [] __device_suspend+0x22d/0x270 [] async_suspend+0x1a/0x90 [] async_run_entry_fn+0x5f/0x150 [] process_one_work+0x185/0x3e0 [] ? process_one_work+0x119/0x3e0 [] ? async_schedule+0x10/0x10 [] worker_thread+0x118/0x330 [] ? rescuer_thread+0x1f0/0x1f0 [] kthread+0x74/0x80 [] ? __init_kthread_worker+0x60/0x60 [] kernel_thread_helper+0x6/0xd ---[ end trace d0431b5a12e598a9 ]--- e1000e 0000:02:00.0: PCI INT A disabled e1000e 0000:02:00.0: PME# enabled pcieport 0000:00:1c.0: wake-up capability enabled by ACPI ACPI handle has no context! sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ata6: port disabled--ignoring ata_piix 0000:00:1f.1: PCI INT C disabled ahci 0000:00:1f.2: PCI INT B disabled snd_hda_intel 0000:00:1b.0: PCI INT B disabled PM: freeze of devices complete after 145.622 msecs ------------[ cut here ]------------ WARNING: at drivers/pci/pci-driver.c:607 pci_has_legacy_pm_support+0x2d/0x60() Hardware name: 17097HU Modules linked in: Pid: 9871, comm: hibernate Tainted: G W 3.2.0-rc2+ #191 Call Trace: [] warn_slowpath_common+0x6d/0xa0 [] ? pci_has_legacy_pm_support+0x2d/0x60 [] ? pci_has_legacy_pm_support+0x2d/0x60 [] warn_slowpath_null+0x1d/0x20 [] pci_has_legacy_pm_support+0x2d/0x60 [] pci_pm_freeze_noirq+0x23/0xb0 [] pm_noirq_op+0x177/0x260 [] dpm_suspend_noirq+0xda/0x270 [] hibernation_snapshot+0xe6/0x310 [] ? freeze_processes+0x2f/0x60 [] hibernate+0xc7/0x1e0 [] ? pm_async_store+0x40/0x40 [] state_store+0xeb/0x100 [] ? pm_async_store+0x40/0x40 [] kobj_attr_store+0x20/0x30 [] sysfs_write_file+0x99/0xf0 [] vfs_write+0x9a/0x140 [] ? sysfs_open_file+0x1e0/0x1e0 [] sys_write+0x3d/0x70 [] sysenter_do_call+0x12/0x31 ---[ end trace d0431b5a12e598aa ]--- PM: late freeze of devices complete after 106.461 msecs ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 103177 pages PM: Normal pages needed: 31593 + 1024, available pages: 195477 PM: Restoring platform NVS memory Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Disabled fast string operations NMI watchdog enabled, takes one hw-pmu counter. CPU1 is up ACPI: Waking up from system sleep state S4 snd_hda_intel 0000:00:1b.0: BAR 0: set to [mem 0xee240000-0xee243fff 64bit] (PCI address [0xee240000-0xee243fff]) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x200, writing 0x20b) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007) e1000e 0000:02:00.0: BAR 0: set to [mem 0xee000000-0xee01ffff] (PCI address [0xee000000-0xee01ffff]) e1000e 0000:02:00.0: BAR 2: set to [io 0x2000-0x201f] (PCI address [0x2000-0x201f]) e1000e 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) e1000e 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xe4301800-0xe43018ff] (PCI address [0xe4301800-0xe43018ff]) sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) ------------[ cut here ]------------ WARNING: at drivers/pci/pci-driver.c:607 pci_has_legacy_pm_support+0x2d/0x60() Hardware name: 17097HU Modules linked in: Pid: 9871, comm: hibernate Tainted: G W 3.2.0-rc2+ #191 Call Trace: [] warn_slowpath_common+0x6d/0xa0 [] ? pci_has_legacy_pm_support+0x2d/0x60 [] ? pci_has_legacy_pm_support+0x2d/0x60 [] warn_slowpath_null+0x1d/0x20 [] pci_has_legacy_pm_support+0x2d/0x60 [] pci_pm_restore_noirq+0x2a/0x80 [] pm_noirq_op+0x1a2/0x260 [] dpm_resume_noirq+0x21b/0x230 [] hibernation_snapshot+0x145/0x310 [] ? freeze_processes+0x2f/0x60 [] hibernate+0xc7/0x1e0 [] ? pm_async_store+0x40/0x40 [] state_store+0xeb/0x100 [] ? pm_async_store+0x40/0x40 [] kobj_attr_store+0x20/0x30 [] sysfs_write_file+0x99/0xf0 [] vfs_write+0x9a/0x140 [] ? sysfs_open_file+0x1e0/0x1e0 [] sys_write+0x3d/0x70 [] sysenter_do_call+0x12/0x31 ---[ end trace d0431b5a12e598ab ]--- PM: early restore of devices complete after 204.841 msecs i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: uhci_pci_resume usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: uhci_pci_resume usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: uhci_pci_resume usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: uhci_pci_resume usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: setting latency timer to 64 pcieport 0000:00:1c.0: wake-up capability disabled by ACPI e1000e 0000:02:00.0: PME# disabled e1000e 0000:02:00.0: Disabling ASPM L0s L1 ------------[ cut here ]------------ usb usb1: root hub lost power or was reset ehci_hcd 0000:00:1d.7: reset command 0010002 (park)=0 ithresh=1 period=1024 Reset HALT WARNING: at drivers/pci/pci-driver.c:607 pci_has_legacy_pm_support+0x2d/0x60() ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported sd 0:0:0:0: [sda] Starting disk ata6: port disabled--ignoring usb usb1: usb resume ehci_hcd 0000:00:1d.7: resume root hub after power loss usb usb2: usb resume usb usb2: wakeup_rh usb usb3: usb resume usb usb3: wakeup_rh usb usb4: usb resume usb usb4: wakeup_rh usb usb5: usb resume usb usb5: wakeup_rh Hardware name: 17097HU Modules linked in: Pid: 9882, comm: kworker/u:5 Tainted: G W 3.2.0-rc2+ #191 Call Trace: hub 2-0:1.0: hub_reset_resume [] warn_slowpath_common+0x6d/0xa0 hub 2-0:1.0: trying to enable port power on non-switchable hub hub 3-0:1.0: hub_reset_resume hub 3-0:1.0: trying to enable port power on non-switchable hub hub 4-0:1.0: hub_reset_resume hub 4-0:1.0: trying to enable port power on non-switchable hub hub 5-0:1.0: hub_reset_resume hub 5-0:1.0: trying to enable port power on non-switchable hub [] ? pci_has_legacy_pm_support+0x2d/0x60 [] ? pci_has_legacy_pm_support+0x2d/0x60 [] warn_slowpath_null+0x1d/0x20 [] pci_has_legacy_pm_support+0x2d/0x60 [] pci_pm_restore+0x35/0x90 [] ? pci_legacy_resume+0x60/0x60 [] pm_op+0x1b1/0x1d0 [] ? pm_runtime_enable+0x43/0x70 [] device_resume+0x17f/0x1c0 [] async_resume+0x19/0x40 [] async_run_entry_fn+0x5f/0x150 [] process_one_work+0x185/0x3e0 [] ? process_one_work+0x119/0x3e0 [] ? async_schedule+0x10/0x10 [] worker_thread+0x118/0x330 [] ? rescuer_thread+0x1f0/0x1f0 [] kthread+0x74/0x80 [] ? __init_kthread_worker+0x60/0x60 [] kernel_thread_helper+0x6/0xd ---[ end trace d0431b5a12e598ac ]--- sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 hub 5-0:1.0: port 1: status 0100 change 0003 uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00 hub 5-0:1.0: port 2: status 0100 change 0003 ehci_hcd 0000:00:1d.7: port 8 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT ehci_hcd 0000:00:1d.7: port 7 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT hub 1-0:1.0: hub_reset_resume hub 1-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 usb 5-1: finish reset-resume uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00 usb 5-2: finish reset-resume ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 usb 5-1: reset full-speed USB device number 2 using uhci_hcd Extended CMOS year: 2000 thinkpad_acpi: ACPI backlight control delay disabled btusb 5-1:1.0: no reset_resume for driver btusb? btusb 5-1:1.1: no reset_resume for driver btusb? btusb 5-1:1.0: forced unbind usb 5-2: reset full-speed USB device number 3 using uhci_hcd usb 5-2: ep0 maxpacket = 8 PM: restore of devices complete after 905.004 msecs usbserial_generic 5-1:1.0: usb_probe_interface usbserial_generic 5-1:1.0: usb_probe_interface - got id btusb 5-1:1.0: usb_probe_interface btusb 5-1:1.0: usb_probe_interface - got id uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us PM: Image restored successfully. Restarting tasks ... hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0006 hub 5-0:1.0: port 1, status 0103, change 0000, 12 Mb/s hub 5-0:1.0: port 2, status 0103, change 0000, 12 Mb/s hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 done. PM: Basic memory bitmaps freed video LNXVIDEO:00: Restoring backlight state mmc0: new SD card at address 913e mmcblk0: mmc0:913e SU01G 968 MiB mmcblk0: p1 usb usb2: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend, wakeup 1 usb usb2: suspend_rh hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend, wakeup 1 usb usb4: suspend_rh hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend, wakeup 1 usb usb3: suspend_rh hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend, wakeup 1 ehci_hcd 0000:00:1d.7: suspend root hub