linux-kernel - [PATCH 1/3] mtd/nand : use elbc_fcm_ctrl->oob to set FPAR

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1322095306-13156-1-git-send-email-b35362@freescale.com>
Date:	Thu, 24 Nov 2011 08:41:44 +0800
From:	<b35362@...escale.com>
To:	<dwmw2@...radead.org>, <Artem.Bityutskiy@...ia.com>,
	<scottwood@...escale.com>
CC:	<linux-mtd@...ts.infradead.org>, <linuxppc-dev@...ts.ozlabs.org>,
	<akpm@...ux-foundation.org>, <linux-kernel@...r.kernel.org>,
	<leoli@...escale.com>
Subject: [PATCH 1/3] mtd/nand : use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR

From: Liu Shuo <b35362@...escale.com>

On both of large-page chip and small-page chip, we always should use
'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
use a overflowed 'column' to set it.

Signed-off-by: Liu Shuo <b35362@...escale.com>
Signed-off-by: Li Yang <leoli@...escale.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c |   18 +++++++++++-------
 1 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index cc08a11..6fce7da 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -414,9 +414,17 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		         page_addr, column);
 
 		elbc_fcm_ctrl->column = column;
-		elbc_fcm_ctrl->oob = 0;
 		elbc_fcm_ctrl->use_mdr = 1;
 
+		if (column >= mtd->writesize) {
+			/* OOB area */
+			column -= mtd->writesize;
+			elbc_fcm_ctrl->oob = 1;
+		} else {
+			WARN_ON(column != 0);
+			elbc_fcm_ctrl->oob = 0;
+		}
+
 		fcr = (NAND_CMD_STATUS   << FCR_CMD1_SHIFT) |
 		      (NAND_CMD_SEQIN    << FCR_CMD2_SHIFT) |
 		      (NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT);
@@ -441,16 +449,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			         (FIR_OP_CW1 << FIR_OP6_SHIFT) |
 			         (FIR_OP_RS  << FIR_OP7_SHIFT));
 
-			if (column >= mtd->writesize) {
+			if (elbc_fcm_ctrl->oob)
 				/* OOB area --> READOOB */
-				column -= mtd->writesize;
 				fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
-				elbc_fcm_ctrl->oob = 1;
-			} else {
-				WARN_ON(column != 0);
+			else
 				/* First 256 bytes --> READ0 */
 				fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
-			}
 		}
 
 		out_be32(&lbc->fcr, fcr);
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/