linux-kernel - AW: AW: [PATCH] net/can/mscan: Enable interrupts when all TX buffers are occupied to get notified when they are available again

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <C3745E3C7FD07D429C54EB3D7606A5A7677EDE@ZRHEX021.ads.zuehlke.com>
Date:	Mon, 28 Nov 2011 14:13:36 +0000
From:	"Mosler, Martin" <mmo@...hlke.com>
To:	Wolfgang Grandegger <wg@...ndegger.com>
CC:	"linux-can@...r.kernel.org" <linux-can@...r.kernel.org>,
	"socketcan@...tkopp.net" <socketcan@...tkopp.net>,
	"lucas.demarchi@...fusion.mobi" <lucas.demarchi@...fusion.mobi>,
	"davem@...emloft.net" <davem@...emloft.net>,
	"mkl@...gutronix.de" <mkl@...gutronix.de>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: AW: AW: [PATCH] net/can/mscan: Enable interrupts when all TX
 buffers are occupied to get notified when they are available again

>>>> When all TX buffers of the mscan are occupied the network layer is told to stop sending further packets. However the TX interrupts are not enabled and therefore the driver has no chance to tell the network layer when it is ready to accept further packets.
>>>>
>>>> Signed-off-by: Martin Mosler <mmo@...hlke.com>
>>>>
>>>> --- linux-2.6/drivers/net/can/mscan/mscan.c.orig    2011-11-28 13:54:29.547850661 +0100
>>>> +++ linux-2.6/drivers/net/can/mscan/mscan.c 2011-11-28 13:55:52.427849601 +0100
>>>> @@ -214,6 +214,7 @@ static netdev_tx_t mscan_start_xmit(stru
>>>>     case 0:
>>>>         netif_stop_queue(dev);
>>>>         dev_err(dev->dev.parent, "Tx Ring full when queue awake!\n");
>>>> +       out_8(&regs->cantier, priv->tx_active);
>>>>         return NETDEV_TX_BUSY;
>>>>     case 1:
>>>>         /*
>>>
>>> Hm, did you see the error message. Actually, it should never happen, IIRC.
>>>
>>> Wolfgang.
>>
>> It is in fact a very rare condition, but it was triggered during testing when pulling CAN-HI and CAN-LO lines
>> to GND and VCC in various combinations to verify how the system is recovering. I am working with a MPC5125
>> if this is valuable information. (This was only one issue I ran into, I had to do other modifications for other
>> issues as well, but I think they are chip specific, I'll share them in a separate thread if you like).
>
>Sounds like a problem with bus-off recovery. The software has restarted
>the queue but the TX objects are still active. How do you handle
>bus-offs? Manually? restart-ms = ?
>
>Would be great if you post patches for your other issues.
>
>Wolfgang.

We are using restart-ms = 500 for now.

I'll post the other patches after I know I did the submit process correctly for this one and when I reviewed 
them more closely, as it is my first submission to the kernel.





--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/