| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1322595550-6473-2-git-send-email-sjur.brandeland@stericsson.com>
Date: Tue, 29 Nov 2011 20:39:02 +0100
From: Sjur Brændeland <sjur.brandeland@...ricsson.com>
To: linux-kernel@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>, sjurbren@...il.com,
Paul Bolle <pebolle@...cali.nl>,
Sjur Brændeland <sjur.brandeland@...ricsson.com>
Subject: [RFCv2 1/9] xshm: Shared Memory layout for ST-E M7400 driver.
Add structures defining the channel configuration and the
shared memory layout used for ST-Ericsson M7400.
These data structures are shared between the Linux host and the
M7400 modem.
Signed-off-by: Sjur Brændeland <sjur.brandeland@...ricsson.com>
---
include/linux/xshm/xshm_ipctoc.h | 160 ++++++++++++++++++++++++++++++++++++++
1 files changed, 160 insertions(+), 0 deletions(-)
create mode 100644 include/linux/xshm/xshm_ipctoc.h
diff --git a/include/linux/xshm/xshm_ipctoc.h b/include/linux/xshm/xshm_ipctoc.h
new file mode 100644
index 0000000..73ea25b
--- /dev/null
+++ b/include/linux/xshm/xshm_ipctoc.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author: Sjur Brendeland / sjur.brandeland@...ricsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef XSHM_TOC
+#define XSHM_TOC
+
+/**
+ * DOC: XSHM Shared Memory Layout
+ *
+ * XSHM defines a set of structures describing the memory layout used
+ * for the Shared Memory IPC. In short &toc_entry points out &ipc_toc,
+ * which points out the &xshm_ipctoc_channel. &xshm_ipctoc_channel defines
+ * the channels used to communicate between host and external device (modem).
+ *
+ * &xshm_ipctoc_channel can be used in packet-mode or stream-mode,
+ * and points out &xshm_bufidx holding information about cirular
+ * buffers, andtheir read/write indices etc.
+ */
+
+#pragma pack(1)
+struct _xshm_offsets {
+ __le32 rx;
+ __le32 tx;
+};
+
+/**
+ * struct xshm_ipctoc - Table Of Content definition for IPC.
+ *
+ * @magic: Magic shall always be set to Ascii coded string "TC" (2 bytes)
+ * @version: Main version of the TOC header.
+ * @subver: Sub version of the TOC header.
+ * @channel_offsets: Offset to both rx and tx direction must be set.
+ * The array must be terminated by a zero value.
+ *
+ * This struct is stored at the start of the External Shared memory, and
+ * serves as a extended table of contents defining the channel configurations
+ * for the external shared memory protocol between a modem and host.
+ *
+ * This extended table of content (ipctoc) is written to a predefine memory
+ * location and the modem will read this ipctoc during start-up and use this
+ * for setting up the IPC channels and it's buffers.
+ *
+ */
+
+struct xshm_ipctoc {
+ __u8 magic[2];
+ __u8 version;
+ __u8 subver;
+ struct _xshm_offsets channel_offsets[8];
+};
+#define XSHM_PACKET_MODE 0x1
+#define XSHM_STREAM_MODE 0x2
+#define XSHM_LOOP_MODE 0x4
+#define XSHM_PAIR_MODE 0x8
+#define XSHM_MODE_MASK 0x3
+
+#define XSHM_IPCTOC_MAGIC1 'T'
+#define XSHM_IPCTOC_MAGIC2 'C'
+
+/**
+ * struct xshm_ipctoc_channel - Channel descriptor for External Shared memory.
+ *
+ * @offset: Relative address to channel data area.
+ * @size: Total size of a SHM channel area partition.
+ * @mtu: Maximum Transfer Unit for packets in a buffer (packet mode).
+ * @packets: Maximum Number of packets in a buffer (packet mode).
+ * @mode: Mode of channel: Packet mode=1, Stream mode (shm_channel_mode = 2).
+ * @buffers: Number of buffers for the channel.
+ * @ipc: Offset to IPC message location (of type struct xshm_bufidx).
+ * @read_bit: GENI/O bit used to indicate update of the read pointer for
+ * this channel (at offset ipc).
+ * @write_bit: GENI/O bit used to indicate update of the write pointer for
+ * this channel (at offset ipc).
+ * @alignment: Protocol specific options for the protocol,
+ * e.g. packet alignment.
+ *
+ * This struct defines the channel configuration for a single direction.
+ *
+ * This structure is pointed out by the &xshm_toc and is written by
+ * host during start-up and read by modem at firmware boot.
+ *
+ */
+
+struct xshm_ipctoc_channel {
+ __le32 offset;
+ __le32 size;
+/* private: */
+ __u8 unused[3];
+/* public: */
+ __u8 mode;
+ __le32 buffers;
+ __le32 ipc;
+ __le16 write_bit;
+ __le16 read_bit;
+ __u16 mtu;
+ __u8 packets;
+ __u8 alignment;
+};
+
+/**
+ * struct xshm_bufidx - Indices's for a uni-directional xshm channel.
+ *
+ * @read_index: Specify the read index for a channel. This field can
+ * have value in range of [0.. xshm_ipctoc_channel.buffers -1].
+ * In stream mode - this is the read index in the ringbuffer.
+ * In packet mode - this index will at any time refer to the next
+ * buffer available for read.
+ *
+ * @write_index: Specify the write index for a channel.
+ * This field can have value in range of [0.. buffers -1].
+ * In stream mode - this is the write index in the ringbuffer.
+ * In packet mode - this index will at any time refer to the next
+ * buffer available for write.
+ *
+ * @size: The actual number of bytes for a buffer at each index.
+ * This array has xshm_ipctoc_channel.buffers slots, one for each buffer.
+ * The size is updated every time data is written to the buffer.
+ *
+ * @state: The state of the channel, 0 - Closed, 1 - Open
+ *
+ *
+ * This structure contains data for the ring-buffer used in packet and stream
+ * mode, for the external shared memory protocol.
+ * Note that the read_buf_index and the write_buf_index
+ * refer to two different channels. So for a ring buffer used to communicate
+ * from modem, the modem will update the write_buf_index while Linux host
+ * will update read_buf_index.
+ */
+struct xshm_bufidx {
+ __le32 state;
+ __le32 read_index;
+ __le32 write_index;
+ __le32 size[0];
+};
+
+/** struct toc_entry - Points out the boot imiages
+ *
+ * @start: Offset counting from start of memory area to the image data.
+ * @size: Size of the images in bytes.
+ * @flags: Use 0 if no flags are in use.
+ * @entry: Where to jump to start exeuting. Only applicable
+ * when using SDRAM. Set to 0xffffffff if unused.
+ * @load_addr: Location in SDRAM to move image. Set to 0xffffffff if
+ * not applicable.
+ * @name: Name of image.
+ */
+struct toc_entry {
+ __le32 start;
+ __le32 size;
+ __le32 flags;
+ __le32 entry_point;
+ __le32 load_addr;
+ char name[12];
+};
+#pragma pack()
+
+#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists