linux-kernel - Re: [PATCH 2/2] Input: tsc2007 - Add a z1_low

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20111201141948.13162071@feng-i7>
Date:	Thu, 1 Dec 2011 14:19:48 +0800
From:	Feng Tang <feng.tang@...el.com>
To:	Dmitry Torokhov <dmitry.torokhov@...il.com>
CC:	"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"Clark, Joel" <joel.clark@...el.com>
Subject: Re: [PATCH 2/2] Input: tsc2007 - Add a z1_low_threshhold platform
 data parameter

On Thu, 1 Dec 2011 13:47:26 +0800
Dmitry Torokhov <dmitry.torokhov@...il.com> wrote:

> On Wed, Nov 30, 2011 at 10:34:18AM +0800, Feng Tang wrote:
> > On Tue, 29 Nov 2011 17:23:10 +0800
> > Dmitry Torokhov <dmitry.torokhov@...il.com> wrote:
> > 
> > > On Tue, Nov 29, 2011 at 04:12:58PM +0800, Feng Tang wrote:
> > > > This originates from a patch in Meego IVI kernel with the name
> > > > 	linux-2.6.37-connext-0027-tsc2007.patch
> > > > There is no author info excepte a line "From  MeeGo
> > > > <kernel@...go.com>"
> > > > 
> > > > When integrating tsc2007 on Intel IVI platform, there are a lot
> > > > of noise data whose z1 value is around 10 which is not a sane
> > > > "z1". So add a "z1_low_threshhold" to filter those nosie data,
> > > > to make the device work properly.
> > > 
> > > Sounds like a task for userspace to ignore pressure that is too
> > > low. Bonus points for making it configurable so user can adjust
> > > sensitivity.
> > 
> > Actually, there is one more point :), without this patch, the
> > driver won't work on our platforms.
> > 
> > The tsc2007_soft_irq will keep reading the input data unless there
> > is no valid pressure data. In our case, those noise data will be
> > seen as valid data during tsc2007_calculate_pressure(), and the
> > tsc2007_soft_irq will run endlessly.
> 
> Even if we add the pressure threshold would not that noise cause
> endless stream of interrupts?

No, there is no endless interrupts for tsc2007. Without the z1
threshold, the while circle in tsc2007_soft_irq will run endlessly
as the noise data will be seen as a valid data:

		rt = tsc2007_calculate_pressure(ts, &tc);
		if (rt == 0 && !ts->get_pendown_state) {
			/*
			 * If pressure reported is 0 and we don't have
			 * callback to check pendown state, we have to
			 * assume that pen was lifted up.
			 */
			break;
		}

With the z1 threshold check, the rt will be 0 for noise data, and the
code flow broke out.

> 
> Also, what kind of z2 is reported with low z1? And do you implement
> get_pendown_state()?

z2 seems normal as some data between 3000-4000. We don't have a
get_pendown_state().

Thanks,
Feng
> 
> Thanks.
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/