Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.1.4.debug+ (root@wensbook) (gcc version 4.6.2 (Debian 4.6.2-4) ) #38 SMP Tue Nov 29 08:14:55 GMT 2011 Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.4.debug+ root=UUID=21d8c00d-634e-477c-b7bd-347f09002b93 ro quiet KERNEL supported cpus: Intel GenuineIntel BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007dd31000 (usable) BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS) BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data) BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS) BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data) BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS) BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data) BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS) BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data) BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS) BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data) BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved) BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data) BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7dd31 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFE00000 mask FFFE00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 07F000000 mask FFF000000 uncachable 3 base 07EF00000 mask FFFF00000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-000000007dd31000 0000000000 - 007dc00000 page 2M 007dc00000 - 007dd31000 page 4k kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000 RAMDISK: 37b76000 - 37db3000 ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013) ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F) ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109) ACPI: FACS 000000007eecc000 00040 ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109) ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109) ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109) ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007b400000-ffff88007cffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007dd31 On node 0 totalpages: 515264 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3922 pages, LIFO batch:0 DMA32 zone: 6991 pages used for memmap DMA32 zone: 504290 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff88007da00000 s76480 r8192 d21824 u1048576 pcpu-alloc: s76480 r8192 d21824 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508212 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.4.debug+ root=UUID=21d8c00d-634e-477c-b7bd-347f09002b93 ro quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2008484k/2061508k available (4223k kernel code, 452k absent, 52572k reserved, 4438k data, 752k init) Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 5823 kB per task-struct memory footprint: 1920 bytes ODEBUG: 0 of 0 active objects replaced hpet clockevent registered Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using HPET reference calibration Detected 2393.993 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.98 BogoMIPS (lpj=9575972) pid_max: default: 32768 minimum: 301 BUG: scheduling while atomic: swapper/0/0x10000002 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted 3.1.4.debug+ #38 Call Trace: [] __schedule_bug+0x60/0x65 [] ? pidmap_init+0x84/0xc4 [] __schedule+0x759/0x920 [] ? pidmap_init+0x84/0xc4 [] __cond_resched+0x25/0x40 [] _cond_resched+0x2d/0x40 [] kmem_cache_alloc_trace+0x4f/0x1d0 [] pidmap_init+0x84/0xc4 [] start_kernel+0x339/0x3bc [] x86_64_start_reservations+0x132/0x136 [] x86_64_start_kernel+0xf0/0xf7 Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20110623 BUG: scheduling while atomic: swapper/0/0x10000002 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted 3.1.4.debug+ #38 Call Trace: [] __schedule_bug+0x60/0x65 [] __schedule+0x759/0x920 [] __cond_resched+0x25/0x40 [] _cond_resched+0x2d/0x40 [] acpi_ps_complete_op+0x2bc/0x2d1 [] ? acpi_ds_load1_end_op+0xa4/0x249 [] acpi_ps_parse_loop+0x8b8/0xa4f [] ? acpi_ut_create_generic_state+0x2d/0x4a [] acpi_ps_parse_aml+0x107/0x37d [] acpi_ns_one_complete_parse+0x125/0x142 [] ? acpi_os_signal_semaphore+0x5f/0x6f [] acpi_ns_parse_table+0x49/0x8e [] acpi_ns_load_table+0x75/0x110 [] acpi_load_tables+0xa1/0x18e [] acpi_early_init+0x6c/0xf7 [] start_kernel+0x3aa/0x3bc [] x86_64_start_reservations+0x132/0x136 [] x86_64_start_kernel+0xf0/0xf7 BUG: scheduling while atomic: swapper/0/0x10000002 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted 3.1.4.debug+ #38 Call Trace: [] __schedule_bug+0x60/0x65 [] ? acpi_os_acquire_object+0x26/0x28 [] __schedule+0x759/0x920 [] ? acpi_os_acquire_object+0x26/0x28 [] __cond_resched+0x25/0x40 [] _cond_resched+0x2d/0x40 [] kmem_cache_alloc+0x4b/0x1f0 [] ? acpi_os_acquire_object+0x26/0x28 [] acpi_os_acquire_object+0x26/0x28 [] acpi_ps_alloc_op+0x37/0x5d [] acpi_ps_get_next_arg+0xc8/0x2b6 [] acpi_ps_parse_loop+0x598/0xa4f [] ? acpi_ut_create_generic_state+0x2d/0x4a [] acpi_ps_parse_aml+0x107/0x37d [] acpi_ns_one_complete_parse+0x125/0x142 [] ? acpi_os_signal_semaphore+0x5f/0x6f [] acpi_ns_parse_table+0x87/0x8e [] acpi_ns_load_table+0x75/0x110 [] acpi_load_tables+0xa1/0x18e [] acpi_early_init+0x6c/0xf7 [] start_kernel+0x3aa/0x3bc [] x86_64_start_reservations+0x132/0x136 [] x86_64_start_kernel+0xf0/0xf7 BUG: scheduling while atomic: swapper/0/0x10000002 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted 3.1.4.debug+ #38 Call Trace: [] __schedule_bug+0x60/0x65 [] ? acpi_os_acquire_object+0x26/0x28 [] __schedule+0x759/0x920 [] ? __delete_object+0x6e/0xc0 [] ? acpi_os_acquire_object+0x26/0x28 [] __cond_resched+0x25/0x40 [] _cond_resched+0x2d/0x40 [] kmem_cache_alloc+0x4b/0x1f0 [] ? cache_free_debugcheck+0x13b/0x280 [] acpi_os_acquire_object+0x26/0x28 [] acpi_ps_alloc_op+0x5b/0x5d [] acpi_ps_get_next_arg+0x3b/0x2b6 [] ? acpi_os_release_object+0x9/0xd [] acpi_ps_parse_loop+0x598/0xa4f [] ? acpi_ut_create_generic_state+0x2d/0x4a [] acpi_ps_parse_aml+0x107/0x37d [] acpi_ns_one_complete_parse+0x125/0x142 [] ? acpi_os_signal_semaphore+0x5f/0x6f [] acpi_ns_parse_table+0x87/0x8e [] acpi_ns_load_table+0x75/0x110 [] acpi_load_tables+0xa1/0x18e [] acpi_early_init+0x6c/0xf7 [] start_kernel+0x3aa/0x3bc [] x86_64_start_reservations+0x132/0x136 [] x86_64_start_kernel+0xf0/0xf7 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. lockdep: fixing up alternatives. Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 9a000 NMI watchdog enabled, takes one hw-pmu counter. Brought up 2 CPUs Total of 2 processors activated (9575.89 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region at 7dd31000 (2101248 bytes) PM: Registering ACPI NVS region at 7dfe5000 (8192 bytes) PM: Registering ACPI NVS region at 7eec3000 (8192 bytes) PM: Registering ACPI NVS region at 7eec8000 (12288 bytes) PM: Registering ACPI NVS region at 7eecc000 (77824 bytes) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820 PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: EC description table is found, configuring boot EC [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101 pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff] pci 0000:02:00.0: [14e4:4328] type 0 class 0x000280 pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] pci 0000:03:00.0: [11ab:436a] type 0 class 0x000200 pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.5: PCI bridge to [bus 03-03] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff] pci 0000:04:03.0: [11c1:5811] type 0 class 0x000c00 pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff] pci 0000:04:03.0: supports D1 D2 pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007dd31000 - 000000007fffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0x80000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed1c000-0xfed1ffff] pnp 00:01: [mem 0xfed14000-0xfed17fff] pnp 00:01: [mem 0xfed18000-0xfed18fff] pnp 00:01: [mem 0xfed19000-0xfed19fff] pnp 00:01: [mem 0xf0000000-0xf3ffffff] pnp 00:01: [mem 0xfed20000-0xfed3ffff] pnp 00:01: [mem 0xfed45000-0xfed8ffff] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0300-0x031f] pnp 00:02: [irq 6] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active) pnp 00:03: [io 0x0000-0x001f] pnp 00:03: [io 0x0081-0x0091] pnp 00:03: [io 0x0093-0x009f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [mem 0xff000000-0xffffffff] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:05: [irq 0 disabled] pnp 00:05: [irq 8] pnp 00:05: [mem 0xfed00000-0xfed003ff] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:06: [io 0x00f0] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x002e-0x002f] pnp 00:07: [io 0x004e-0x004f] pnp 00:07: [io 0x0061] pnp 00:07: [io 0x0063] pnp 00:07: [io 0x0065] pnp 00:07: [io 0x0067] pnp 00:07: [io 0x0070] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0092] pnp 00:07: [io 0x00b2-0x00b3] pnp 00:07: [io 0x0680-0x069f] pnp 00:07: [io 0x0800-0x080f] pnp 00:07: [io 0x0810-0x0817] pnp 00:07: [io 0x0400-0x047f] pnp 00:07: [io 0x0500-0x053f] pnp 00:07: [io 0x1640-0x164f] system 00:07: [io 0x0680-0x069f] has been reserved system 00:07: [io 0x0800-0x080f] has been reserved system 00:07: [io 0x0810-0x0817] has been reserved system 00:07: [io 0x0400-0x047f] has been reserved system 00:07: [io 0x0500-0x053f] has been reserved system 00:07: [io 0x1640-0x164f] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [io 0x0070-0x0077] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.5: BAR 15: assigned [mem 0x90800000-0x908fffff pref] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90800000-0x90afffff pref] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90b00000-0x90cfffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff] pci 0000:00:1c.0: bridge window [mem 0x90b00000-0x90cfffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x90800000-0x9081ffff pref] pci 0000:00:1c.5: PCI bridge to [bus 03-03] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff] pci 0000:00:1c.5: bridge window [mem 0x90800000-0x90afffff pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff] pci 0000:00:1c.0: enabling device (0000 -> 0003) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff] pci_bus 0000:01: resource 2 [mem 0x90b00000-0x90cfffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff] pci_bus 0000:03: resource 2 [mem 0x90800000-0x90afffff pref] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 5, 163840 bytes) UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS mismatch (256 != 64), using 64 bytes Unpacking initramfs... Freeing initrd memory: 2292k freed Machine check injector initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 3927 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) start plist test end plist test pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt pci 0000:02:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt pci 0000:03:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 16384K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 43 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support fbcon: inteldrmfb (fb0) is primary device Refined TSC clocksource calibration: 2393.999 MHz. Switching to clocksource tsc Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:08: RTC can wake from S4 rtc (null): alarm rollover: day rtc_cmos: dev (254:0) rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 Registering the dns_resolver key type PM: Hibernation image not present or could not be loaded. registered taskstats version 1 kmemleak: Kernel memory leak detector initialized kmemleak: Automatic memory scanning thread started rtc_cmos 00:08: setting system clock to 2011-12-02 09:31:28 UTC (1322818288) Freeing unused kernel memory: 752k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 1900k freed Freeing unused kernel memory: 276k freed udevd[50]: starting version 175 SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21 ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21 ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18 ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18 ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66 ata1.00: configured for UDMA/66 scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5 ata3.00: ATA-8: FUJITSU MHY2160BH, 0081000D, max UDMA/100 ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2160B 0081 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sda5 sda6 sd 2:0:0:0: [sda] Attached SCSI disk PM: Starting manual resume from disk PM: Hibernation image partition 8:5 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) udevd[231]: starting version 175 ACPI: acpi_idle registered with cpuidle usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00 input: PC Speaker as /devices/platform/pcspkr/input/input5 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.1.4.debug+ ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.1.4.debug+ ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected sky2: driver version 1.29 sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:03:00.0: irq 44 for MSI/MSI-X sky2 0000:03:00.0: eth0: addr 00:1f:f3:d5:13:ce Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.1.4.debug+ uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.1.4.debug+ uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.1.4.debug+ uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 3.1.4.debug+ uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 3.1.4.debug+ uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ADP1] (on-line) b43-pci-bridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 b43-pci-bridge 0000:02:00.0: setting latency timer to 64 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0C, vendor 0x4243) ssb: Core 2 found: PCI-E (cc 0x820, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243) ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0 input: applesmc as /devices/platform/applesmc.768/input/input6 usb 2-4: new high speed USB device number 3 using ehci_hcd sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 usb 2-4: New USB device found, idVendor=05ac, idProduct=8501 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: Built-in iSight usb 2-4: Manufacturer: Micron firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 cfg80211: Calling CRDA to update world regulatory domain usb 3-1: new full speed USB device number 2 using uhci_hcd usb 3-1: New USB device found, idVendor=05ac, idProduct=1000 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 b43-phy0: Broadcom 4321 WLAN found (core revision 12) firewire_core: created device fw0: GUID 0021e9fffebe792a, S400 usb 3-2: new low speed USB device number 3 using uhci_hcd ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio Broadcom 43xx driver loaded [ Features: PNLS, Firmware-ID: FW13 ] usb 3-2: New USB device found, idVendor=045e, idProduct=0040 usb 3-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 3-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) usb 3-2: Manufacturer: Microsoft snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) hda_codec: ALC889A: SKU not ready 0x400000f0 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 usb 5-1: new low speed USB device number 2 using uhci_hcd usb 5-1: New USB device found, idVendor=0a81, idProduct=0205 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: PS2 to USB Converter usb 5-1: Manufacturer: CHESEN usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 generic-usb: probe of 0003:05AC:1000.0001 failed with error -71 generic-usb: probe of 0003:05AC:1000.0002 failed with error -71 input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input8 generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-2/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9 generic-usb 0003:0A81:0205.0004: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1/input0 usb 7-1: new low speed USB device number 2 using uhci_hcd input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input10 generic-usb 0003:0A81:0205.0005: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 7-1: New USB device found, idVendor=05ac, idProduct=8242 usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1: Product: IR Receiver usb 7-1: Manufacturer: Apple Computer, Inc. usb 7-2: new full speed USB device number 3 using uhci_hcd usb 7-2: New USB device found, idVendor=05ac, idProduct=022a usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2: Product: Apple Internal Keyboard / Trackpad usb 7-2: Manufacturer: Apple Computer usb 3-1: USB disconnect, device number 2 appletouch: Geyser mode initialized. input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input11 usbcore: registered new interface driver appletouch apple 0003:05AC:8242.0006: hiddev0,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0 input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input12 apple 0003:05AC:022A.0007: input,hidraw4: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0 input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input13 apple 0003:05AC:022A.0008: input,hidraw5: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2 usb 3-1: new full speed USB device number 4 using uhci_hcd usb 3-1: New USB device found, idVendor=05ac, idProduct=8205 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb Adding 3955912k swap on /dev/sda5. Priority:-1 extents:1 across:3955912k EXT4-fs (sda4): re-mounted. Opts: (null) EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro loop: module loaded i2c /dev entries driver fuse init (API version 7.17) microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14 b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01) ADDRCONF(NETDEV_UP): wlan0: link is not ready sky2 0000:03:00.0: eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present wlan0: direct probe to d8:c7:c8:ad:e3:90 (try 1/3) wlan0: direct probe responded wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX AssocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: Th0S: read arg fail applesmc: Th0H: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TM0P: read data fail applesmc: Th0S: read arg fail applesmc: TN0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: Th0S: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ACPI: EC: GPE storm detected, transactions will use polling mode applesmc: TW0P: read arg fail applesmc: TW0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TTF0: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TC0D: read data fail applesmc: TN0P: read data fail applesmc: TW0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TW0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: Th0H: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TW0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TM0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain applesmc: TM0P: read arg fail wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TC0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: Th0H: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TTF0: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TC0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: Th0S: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: Th1H: read data fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TW0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: Th0H: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TW0P: read arg fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated applesmc: TM0P: read data fail ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated ieee80211 phy0: wlan0: No probe response from AP d8:c7:c8:ad:e3:90 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with d8:c7:c8:ad:e3:90 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:90 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:90 (capab=0x421 status=0 aid=2) wlan0: associated