| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20111203123516.5ebb057b@notabene.brown>
Date: Sat, 3 Dec 2011 12:35:16 +1100
From: NeilBrown <neilb@...e.de>
To: Igor Grinberg <grinberg@...pulab.co.il>
Cc: Samuel Ortiz <sameo@...ux.intel.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] MFD: TWL: add power off functionality
On Sun, 27 Nov 2011 11:42:17 +0200 Igor Grinberg <grinberg@...pulab.co.il>
wrote:
> ping!
pong ...
Hi,
I've been trying this patch out on my GTA04 with 3.2-rc4 and it doesn't
work :-(
As soon as it tries to touch the i2c controller to send the power-down
message I get:
[ 96.130920] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa070008
[ 96.138885] Internal error: : 1028 [#1] PREEMPT
[ 96.143585] Modules linked in: bluetooth ipv6 g_ether hso rfkill
[ 96.149841] CPU: 0 Not tainted (3.2.0-rc4+ #145)
[ 96.155029] PC is at omap_i2c_wait_for_bb+0xc4/0x100
[ 96.160186] LR is at omap_i2c_wait_for_bb+0xac/0x100
[ 96.165344] pc : [<c02e84d4>] lr : [<c02e84bc>] psr: 60000013
[ 96.165344] sp : d4a1ddc0 ip : d4a1dd20 fp : 00000002
[ 96.177246] r10: 00000002 r9 : c0d1f2c8 r8 : dbda9c00
[ 96.182678] r7 : c05d2a88 r6 : dbda9c00 r5 : ffff9aa8 r4 : c0d1f458
[ 96.189453] r3 : 00000008 r2 : 00000002 r1 : fa070000 r0 : 00000001
[ 96.196228] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 96.203643] Control: 10c5387d Table: 8bdc8019 DAC: 00000015
[ 96.209625] Process poweroff (pid: 722, stack limit = 0xd4a1c2f0)
The call trace is
[ 96.373413] [<c02e84d4>] (omap_i2c_wait_for_bb+0xc4/0x100) from [<c02e8aa8>] (omap_i2c_xfer+0x34/0x4fc)
[ 96.383178] [<c02e8aa8>] (omap_i2c_xfer+0x34/0x4fc) from [<c02e6978>] (i2c_transfer+0xac/0x130)
[ 96.392211] [<c02e6978>] (i2c_transfer+0xac/0x130) from [<c0259d20>] (twl_i2c_read+0xd8/0x12c)
[ 96.401153] [<c0259d20>] (twl_i2c_read+0xd8/0x12c) from [<c025ba0c>] (twl4030_power_off+0x34/0x124)
[ 96.410583] [<c025ba0c>] (twl4030_power_off+0x34/0x124) from [<c000f130>] (machine_power_off+0x1c/0x28)
[ 96.420349] [<c000f130>] (machine_power_off+0x1c/0x28) from [<c004ad94>] (sys_reboot+0x124/0x1e0)
[ 96.429565] [<c004ad94>] (sys_reboot+0x124/0x1e0) from [<c000e780>] (ret_fast_syscall+0x0/0x3c)
It has accessed this same address 0xfa070008 multiple times during normally
running, but here at shutdown it gets an external abort.
Presumably something is being turned of earlier in the shutdown sequence so
that i2c is no longer available, but I have no idea what.
Do you have any idea what might be being disabled/turned-off/unmapped/
cleared/whatever that could cause this?
I see:
[ 96.029968] twl 1-0048: shutdown
[ 96.038604] i2c i2c-1: shutdown
amongst the messages, but as far as I can tell there is no actual shutdown
method for these to call so they don't do anything.
Ideas?
Thanks,
NeilBrown
>
>
> On 11/13/11 11:49, Igor Grinberg wrote:
> > TWL family of PMICs, used in master mode, have a power off
> > functionality. The resulting power off sequence shuts down all the SoC
> > supplies, LDOs, etc. The sequence is described in the datasheets
> > chapter "Power-Off Sequence".
> > Note, that board must be wired correctly for the power off to work as
> > expected.
> >
> > Signed-off-by: Igor Grinberg <grinberg@...pulab.co.il>
> > ---
> > drivers/mfd/twl4030-power.c | 42 ++++++++++++++++++++++++++++++++++++++++--
> > include/linux/i2c/twl.h | 2 ++
> > 2 files changed, 42 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> > index a764676..d905f51 100644
> > --- a/drivers/mfd/twl4030-power.c
> > +++ b/drivers/mfd/twl4030-power.c
> > @@ -34,7 +34,8 @@
> > static u8 twl4030_start_script_address = 0x2b;
> >
> > #define PWR_P1_SW_EVENTS 0x10
> > -#define PWR_DEVOFF (1<<0)
> > +#define PWR_DEVOFF (1 << 0)
> > +#define SEQ_OFFSYNC (1 << 0)
> >
> > #define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
> > #define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b)
> > @@ -511,12 +512,27 @@ int twl4030_remove_script(u8 flags)
> > return err;
> > }
> >
> > +/*
> > + * In master mode, start the power off sequence.
> > + * After a successful execution, TWL shuts down the power to the SoC
> > + * and all peripherals connected to it.
> > + */
> > +void twl4030_power_off(void)
> > +{
> > + int err;
> > +
> > + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, PWR_DEVOFF,
> > + TWL4030_PM_MASTER_P1_SW_EVENTS);
> > + if (err)
> > + pr_err("TWL4030 Unable to power off\n");
> > +}
> > +
> > void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
> > {
> > int err = 0;
> > int i;
> > struct twl4030_resconfig *resconfig;
> > - u8 address = twl4030_start_script_address;
> > + u8 val, address = twl4030_start_script_address;
> >
> > err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
> > TWL4030_PM_MASTER_KEY_CFG1,
> > @@ -548,6 +564,28 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
> > }
> > }
> >
> > + /* Board has to be wired properly to use this feature */
> > + if (twl4030_scripts->use_poweroff && !pm_power_off) {
> > + /* Default for SEQ_OFFSYNC is set, lets ensure this */
> > + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &val,
> > + TWL4030_PM_MASTER_CFG_P123_TRANSITION);
> > + if (err) {
> > + pr_warning("TWL4030 Unable to read registers\n");
> > +
> > + } else if (!(val & SEQ_OFFSYNC)) {
> > + val |= SEQ_OFFSYNC;
> > + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, val,
> > + TWL4030_PM_MASTER_CFG_P123_TRANSITION);
> > + if (err) {
> > + pr_err("TWL4030 Unable to setup SEQ_OFFSYNC\n");
> > + goto relock;
> > + }
> > + }
> > +
> > + pm_power_off = twl4030_power_off;
> > + }
> > +
> > +relock:
> > err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0,
> > TWL4030_PM_MASTER_PROTECT_KEY);
> > if (err)
> > diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> > index 114c0f6..78d3465 100644
> > --- a/include/linux/i2c/twl.h
> > +++ b/include/linux/i2c/twl.h
> > @@ -652,10 +652,12 @@ struct twl4030_power_data {
> > unsigned num;
> > struct twl4030_resconfig *resource_config;
> > #define TWL4030_RESCONFIG_UNDEF ((u8)-1)
> > + bool use_poweroff; /* Board is wired for TWL poweroff */
> > };
> >
> > extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
> > extern int twl4030_remove_script(u8 flags);
> > +extern void twl4030_power_off(void);
> >
> > struct twl4030_codec_data {
> > unsigned int digimic_delay; /* in ms */
>
Download attachment "signature.asc" of type "application/pgp-signature" (829 bytes)
Powered by blists - more mailing lists