[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1322973098-2528-1-git-send-email-shuo.liu@freescale.com>
Date: Sun, 4 Dec 2011 12:31:36 +0800
From: <shuo.liu@...escale.com>
To: <dwmw2@...radead.org>, <Artem.Bityutskiy@...ia.com>,
<scottwood@...escale.com>
CC: <linux-mtd@...ts.infradead.org>, <linuxppc-dev@...ts.ozlabs.org>,
<akpm@...ux-foundation.org>, <linux-kernel@...r.kernel.org>,
<leoli@...escale.com>, <shuo.liu@...escale.com>
Subject: [PATCH 1/3] mtd/nand : use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR
From: Liu Shuo <b35362@...escale.com>
On both of large-page chip and small-page chip, we always should use
'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
use a overflowed 'column' to set it.
Signed-off-by: Liu Shuo <b35362@...escale.com>
Signed-off-by: Li Yang <leoli@...escale.com>
---
drivers/mtd/nand/fsl_elbc_nand.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index cc08a11..6fce7da 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -414,9 +414,17 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
page_addr, column);
elbc_fcm_ctrl->column = column;
- elbc_fcm_ctrl->oob = 0;
elbc_fcm_ctrl->use_mdr = 1;
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ elbc_fcm_ctrl->oob = 1;
+ } else {
+ WARN_ON(column != 0);
+ elbc_fcm_ctrl->oob = 0;
+ }
+
fcr = (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |
(NAND_CMD_SEQIN << FCR_CMD2_SHIFT) |
(NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT);
@@ -441,16 +449,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(FIR_OP_CW1 << FIR_OP6_SHIFT) |
(FIR_OP_RS << FIR_OP7_SHIFT));
- if (column >= mtd->writesize) {
+ if (elbc_fcm_ctrl->oob)
/* OOB area --> READOOB */
- column -= mtd->writesize;
fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
- elbc_fcm_ctrl->oob = 1;
- } else {
- WARN_ON(column != 0);
+ else
/* First 256 bytes --> READ0 */
fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
- }
}
out_be32(&lbc->fcr, fcr);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists