| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAP245DXhQcKzf6Hv+t+NbDp9C+XFna0AHoXX3Py7=7o0XkvOrg@mail.gmail.com>
Date: Mon, 5 Dec 2011 02:02:41 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
Cc: linaro-dev@...ts.linaro.org, linux-kernel@...r.kernel.org,
Anson Huang <b20788@...escale.com>, lenb@...nel.org,
Amit Kachhap <amit.kachhap@...aro.org>,
Robert Lee <rob.lee@...aro.org>,
Patch Tracking <patches@...aro.org>
Subject: Re: [PATCH] thermal: Add anatop thermal driver
Ying-Chun,
Len signs-off several of the commits to the thermal framework[1]. So
it is a good idea to cc him.
Amit Daniel is currently working on patches to make the thermal
framework less ACPI-centric. And Rob will be interested in the driver
since he works at Freescale and is tasked with making sure the thermal
management works on their platform. I've cc'ed them all.
That said, unless Freescale is shipping ACPI on the i.MX6, this driver
needs some serious work before it is ready for mainline. Some
high-level comments inline.
Regards,
Amit
[1] ./scripts/get_maintainer.pl -f drivers/thermal/thermal_sys.c
On Sat, Dec 3, 2011 at 8:52 PM, Ying-Chun Liu (PaulLiu)
<paul.liu@...aro.org> wrote:
> From: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
>
> Anatop thermal driver for Freescale imx6 system. This driver currently
> supports basic temperature reading.
>
> Signed-off-by: Anson Huang <b20788@...escale.com>
> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@...aro.org>
> ---
> drivers/thermal/Kconfig | 11 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/anatop_driver.h | 146 +++++++
> drivers/thermal/anatop_thermal.c | 825 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 983 insertions(+), 0 deletions(-)
> create mode 100644 drivers/thermal/anatop_driver.h
> create mode 100644 drivers/thermal/anatop_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index f7f71b2..792152e 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -18,3 +18,14 @@ config THERMAL_HWMON
> depends on THERMAL
> depends on HWMON=y || HWMON=THERMAL
> default y
> +
> +config THERMAL_ANATOP
> + tristate "Anatop Thermal Zone"
> + depends on THERMAL
If thermal is really a requirement for MX6, as state below, it should
be auto-selected when the SOC is enabled as follows:
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..41638c8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -616,6 +616,7 @@ config SOC_IMX6Q
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select USE_OF
+ select THERMAL_ANATOP
help
This enables support for Freescale i.MX6 Quad processor.
> + default y
> + help
> + This driver supports ANATOP thermal zones. It is HIGHLY
> + recommended that this option be enabled on MX6 platform, as
> + your processor(s) may be damaged without it.
> +
> + To compile this driver as a module, choose M here.
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 31108a0..2f88011 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -3,3 +3,4 @@
> #
>
> obj-$(CONFIG_THERMAL) += thermal_sys.o
> +obj-$(CONFIG_THERMAL_ANATOP) += anatop_thermal.o
> diff --git a/drivers/thermal/anatop_driver.h b/drivers/thermal/anatop_driver.h
> new file mode 100644
> index 0000000..5879fca
> --- /dev/null
> +++ b/drivers/thermal/anatop_driver.h
> @@ -0,0 +1,146 @@
> +/*
> + * anatop_drivers.h
> + *
> + * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@...el.com>
> + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@...el.com>
> + *
I assume you copied an existing Intel driver and then hacked it to get
it working on your platform. You don't need this copyright to Intel
above since you're creating a new file.
However, it is polite to add a line saying what file this driver was
copied from in the commit description or at the top of the file.
> + * Copyright (C) 2011 Freescale Semiconductor, Inc.
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> + *
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + */
> +
> +#ifndef __ANATOP_DRIVERS_H__
> +#define __ANATOP_DRIVERS_H__
> +
> +/* Device */
> +#define ANATOP_ACPI_MAX_HANDLES 10
> +struct anatop_handle_list {
> + u32 count;
> + acpi_namespace_node * handles[ANATOP_ACPI_MAX_HANDLES];
> +};
Are you really doing ACPI on your platform?
> +struct anatop_device {
> + struct device dev;
> + acpi_namespace_node *handle; /* no handle for fixed hardware */
> + char name[40];
> + int id;
> + void *driver_data;
> +};
> +struct anatop_device_id {
> + __u8 id[ACPI_ID_LEN];
> + kernel_ulong_t driver_data;
> +};
> +typedef int (*anatop_op_add) (struct anatop_device *device);
> +typedef int (*anatop_op_remove) (struct anatop_device *device, int type);
> +typedef int (*anatop_op_start) (struct anatop_device *device);
> +typedef int (*anatop_op_suspend) (struct anatop_device *device,
> + pm_message_t state);
> +typedef int (*anatop_op_resume) (struct anatop_device *device);
> +typedef int (*anatop_op_bind) (struct anatop_device *device);
> +typedef int (*anatop_op_unbind) (struct anatop_device *device);
> +typedef void (*anatop_op_notify) (struct anatop_device *device, u32 event);
> +
> +struct anatop_ops {
> + u32 anatop_op_add:1;
> + u32 anatop_op_start:1;
> +};
> +
> +struct anatop_device_ops {
> + anatop_op_add add;
> + anatop_op_remove remove;
> + anatop_op_start start;
> + anatop_op_suspend suspend;
> + anatop_op_resume resume;
> + anatop_op_bind bind;
> + anatop_op_unbind unbind;
> + anatop_op_notify notify;
> +};
> +
> +struct anatop_driver {
> + char name[80];
> + char class[80];
> + const struct acpi_device_id *ids; /* Supported Hardware IDs */
> + unsigned int flags;
> + struct anatop_device_ops ops;
> + struct device_driver drv;
> + struct module *owner;
> +};
> +
> +
> +
> +typedef u32 anatop_status; /* All ANATOP Exceptions */
> +
> +#define AT_OK (anatop_status) 0x0000
> +#define AT_ERROR (anatop_status) 0x0001
> +
> +
> +#define ANATOP_MAX_STRING 80
> +
> +/*
> + * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt
> + * if you add to this list.
> + */
> +#define ANATOP_BUS_COMPONENT 0x00010000
> +#define ANATOP_AC_COMPONENT 0x00020000
> +#define ANATOP_BATTERY_COMPONENT 0x00040000
> +#define ANATOP_BUTTON_COMPONENT 0x00080000
> +#define ANATOP_SBS_COMPONENT 0x00100000
> +#define ANATOP_FAN_COMPONENT 0x00200000
> +#define ANATOP_PCI_COMPONENT 0x00400000
> +#define ANATOP_POWER_COMPONENT 0x00800000
> +#define ANATOP_CONTAINER_COMPONENT 0x01000000
> +#define ANATOP_SYSTEM_COMPONENT 0x02000000
> +#define ANATOP_THERMAL_COMPONENT 0x04000000
> +#define ANATOP_MEMORY_DEVICE_COMPONENT 0x08000000
> +#define ANATOP_VIDEO_COMPONENT 0x10000000
> +#define ANATOP_PROCESSOR_COMPONENT 0x20000000
> +
> +/*
> + * _HID definitions
> + * HIDs must conform to ACPI spec(6.1.4)
> + * Linux specific HIDs do not apply to this and begin with LNX:
> + */
> +
> +#define ANATOP_POWER_HID "LNXPOWER"
> +#define ANATOP_PROCESSOR_OBJECT_HID "LNXCPU"
> +#define ANATOP_SYSTEM_HID "LNXSYSTM"
> +#define ANATOP_THERMAL_HID "LNXTHERM"
> +#define ANATOP_BUTTON_HID_POWERF "LNXPWRBN"
> +#define ANATOP_BUTTON_HID_SLEEPF "LNXSLPBN"
> +#define ANATOP_VIDEO_HID "LNXVIDEO"
> +#define ANATOP_BAY_HID "LNXIOBAY"
> +#define ANATOP_DOCK_HID "LNXDOCK"
> +/* Quirk for broken IBM BIOSes */
IBM laptops shipping with IMX6 now? :)
> +#define ANATOP_SMBUS_IBM_HID "SMBUSIBM"
> +
> +/*
> + * For fixed hardware buttons, we fabricate acpi_devices with HID
> + * ACPI_BUTTON_HID_POWERF or ACPI_BUTTON_HID_SLEEPF. Fixed hardware
> + * signals only an event; it doesn't supply a notification value.
> + * To allow drivers to treat notifications from fixed hardware the
> + * same as those from real devices, we turn the events into this
> + * notification value.
> + */
> +#define ANATOP_FIXED_HARDWARE_EVENT 0x100
> +
> +static inline void *anatop_driver_data(struct anatop_device *d)
> +{
> + return d->driver_data;
> +}
> +
> +#endif /*__ANATOP_DRIVERS_H__*/
> diff --git a/drivers/thermal/anatop_thermal.c b/drivers/thermal/anatop_thermal.c
> new file mode 100644
> index 0000000..45d817a
> --- /dev/null
> +++ b/drivers/thermal/anatop_thermal.c
> @@ -0,0 +1,825 @@
> +/*
> + * anatop_thermal.c - anatop Thermal Zone Driver
> + *
> + * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@...el.com>
> + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@...el.com>
Same comment about copyright as above.
This files seems to be a copy of drivers/acpi/thermal.c with lots of
search/replace acpi with anatop. Unless you really require the ACPI
abstractions (I highly doubt it), you're better off using the thermal
framework directly instead of the ACPI abstraction of the thermal
framework that is useful on x86 platforms.
IOW, let's rework the driver. Come talk to us.
> + * Copyright (C) 2011 Freescale Semiconductor, Inc.
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> + *
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + * This driver fully implements the anatop thermal policy as described in the
> + * anatop 2.0 Specification.
> + *
> + * TBD: 1. Implement passive cooling hysteresis.
> + * 2. Enhance passive cooling (CPU) states/limit interface to support
> + * concepts of 'multiple limiters', upper/lower limits, etc.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/dmi.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/types.h>
> +#include <linux/jiffies.h>
> +#include <linux/kmod.h>
> +#include <linux/reboot.h>
> +#include <linux/device.h>
> +#include <linux/uaccess.h>
> +#include <linux/thermal.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include "anatop_driver.h"
> +
> +/* register define of anatop */
> +#define HW_ANADIG_ANA_MISC0 (0x00000150)
> +#define HW_ANADIG_ANA_MISC0_SET (0x00000154)
> +#define HW_ANADIG_ANA_MISC0_CLR (0x00000158)
> +#define HW_ANADIG_ANA_MISC0_TOG (0x0000015c)
> +
> +#define HW_ANADIG_TEMPSENSE0 (0x00000180)
> +#define HW_ANADIG_TEMPSENSE0_SET (0x00000184)
> +#define HW_ANADIG_TEMPSENSE0_CLR (0x00000188)
> +#define HW_ANADIG_TEMPSENSE0_TOG (0x0000018c)
> +
> +#define HW_ANADIG_TEMPSENSE1 (0x00000190)
> +#define HW_ANADIG_TEMPSENSE1_SET (0x00000194)
> +#define HW_ANADIG_TEMPSENSE1_CLR (0x00000198)
> +
> +#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
> +
> +#define BP_ANADIG_TEMPSENSE0_TEMP_VALUE 8
> +#define BM_ANADIG_TEMPSENSE0_TEMP_VALUE 0x000FFF00
> +#define BF_ANADIG_TEMPSENSE0_TEMP_VALUE(v) \
> + (((v) << 8) & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
> +#define BM_ANADIG_TEMPSENSE0_RSVD0 0x00000080
> +#define BM_ANADIG_TEMPSENSE0_TEST 0x00000040
> +#define BP_ANADIG_TEMPSENSE0_VBGADJ 3
> +#define BM_ANADIG_TEMPSENSE0_VBGADJ 0x00000038
> +#define BF_ANADIG_TEMPSENSE0_VBGADJ(v) \
> + (((v) << 3) & BM_ANADIG_TEMPSENSE0_VBGADJ)
> +#define BM_ANADIG_TEMPSENSE0_FINISHED 0x00000004
> +#define BM_ANADIG_TEMPSENSE0_MEASURE_TEMP 0x00000002
> +#define BM_ANADIG_TEMPSENSE0_POWER_DOWN 0x00000001
> +
> +#define BP_ANADIG_TEMPSENSE1_RSVD0 16
> +#define BM_ANADIG_TEMPSENSE1_RSVD0 0xFFFF0000
> +#define BF_ANADIG_TEMPSENSE1_RSVD0(v) \
> + (((v) << 16) & BM_ANADIG_TEMPSENSE1_RSVD0)
> +#define BP_ANADIG_TEMPSENSE1_MEASURE_FREQ 0
> +#define BM_ANADIG_TEMPSENSE1_MEASURE_FREQ 0x0000FFFF
> +#define BF_ANADIG_TEMPSENSE1_MEASURE_FREQ(v) \
> + (((v) << 0) & BM_ANADIG_TEMPSENSE1_MEASURE_FREQ)
> +
> +
> +#define PREFIX "ANATOP: "
> +
> +#define ANATOP_THERMAL_DRIVER_NAME "Anatop Thermal"
> +#define ANATOP_THERMAL_DEVICE_NAME "Thermal Zone"
> +#define ANATOP_THERMAL_FILE_STATE "state"
> +#define ANATOP_THERMAL_FILE_TEMPERATURE "temperature"
> +#define ANATOP_THERMAL_FILE_TRIP_POINTS "trip_points"
> +#define ANATOP_THERMAL_FILE_COOLING_MODE "cooling_mode"
> +#define ANATOP_THERMAL_FILE_POLLING_FREQ "polling_frequency"
> +#define ANATOP_THERMAL_NOTIFY_TEMPERATURE 0x80
> +#define ANATOP_THERMAL_NOTIFY_THRESHOLDS 0x81
> +#define ANATOP_THERMAL_NOTIFY_DEVICES 0x82
> +#define ANATOP_THERMAL_NOTIFY_CRITICAL 0xF0
> +#define ANATOP_THERMAL_NOTIFY_HOT 0xF1
> +#define ANATOP_THERMAL_MODE_ACTIVE 0x00
> +
> +#define ANATOP_THERMAL_MAX_ACTIVE 10
> +#define ANATOP_THERMAL_MAX_LIMIT_STR_LEN 65
> +
> +#define _COMPONENT ANATOP_THERMAL_COMPONENT
> +#define POLLING_FREQ 20
> +#define TEMP_CRITICAL_SHUTDOWN 380
> +#define TEMP_CRITICAL_SLEEP 360
> +#define TEMP_PASSIVE 320
> +#define MEASURE_FREQ 327 /* 327 RTC clocks delay, 10ms */
> +#define CONVER_CONST 1413 /* rough value, need calibration */
> +#define CONVER_DIV_1024 550 /* div value, need calibration */
> +
> +MODULE_AUTHOR("Anson Huang");
> +MODULE_DESCRIPTION("ANATOP Thermal Zone Driver");
> +MODULE_LICENSE("GPL");
> +
> +static int psv;
> +unsigned long anatop_base;
> +
> +module_param(psv, int, 0644);
> +MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
> +
> +static int anatop_thermal_add(struct anatop_device *device);
> +static int anatop_thermal_remove(struct platform_device *pdev);
> +static int anatop_thermal_resume(struct platform_device *pdev);
> +/* static void anatop_thermal_notify(struct anatop_device *device,
> + * u32 event); */
> +static int anatop_thermal_power_on(void);
> +static int anatop_thermal_power_down(void);
> +
> +static const struct anatop_device_id thermal_device_ids[] = {
> + {ANATOP_THERMAL_HID, 0},
> + {"", 0},
> +};
> +MODULE_DEVICE_TABLE(anatop, thermal_device_ids);
> +
> +struct anatop_thermal_state {
> + u8 critical:1;
> + u8 hot:1;
> + u8 passive:1;
> + u8 active:1;
> + u8 reserved:4;
> + int active_index;
> +};
> +
> +struct anatop_thermal_state_flags {
> + u8 valid:1;
> + u8 enabled:1;
> + u8 reserved:6;
> +};
> +
> +struct anatop_thermal_critical {
> + struct anatop_thermal_state_flags flags;
> + unsigned long temperature;
> +};
> +
> +struct anatop_thermal_hot {
> + struct anatop_thermal_state_flags flags;
> + unsigned long temperature;
> +};
> +
> +struct anatop_thermal_passive {
> + struct anatop_thermal_state_flags flags;
> + unsigned long temperature;
> + unsigned long tc1;
> + unsigned long tc2;
> + unsigned long tsp;
> +};
> +
> +struct anatop_thermal_active {
> + struct anatop_thermal_state_flags flags;
> + unsigned long temperature;
> +};
> +
> +struct anatop_thermal_trips {
> + struct anatop_thermal_critical critical;
> + struct anatop_thermal_hot hot;
> + struct anatop_thermal_passive passive;
> + struct anatop_thermal_active active[ANATOP_THERMAL_MAX_ACTIVE];
> +};
> +
> +struct anatop_thermal_flags {
> + u8 cooling_mode:1; /* _SCP */
> + u8 devices:1; /* _TZD */
> + u8 reserved:6;
> +};
> +
> +struct anatop_thermal {
> + struct anatop_device *device;
> + unsigned long temperature;
> + unsigned long last_temperature;
> + unsigned long polling_frequency;
> + u8 zombie;
> + struct anatop_thermal_flags flags;
> + struct anatop_thermal_state state;
> + struct anatop_thermal_trips trips;
> + struct anatop_handle_list devices;
> + struct thermal_zone_device *thermal_zone;
> + int tz_enabled;
> + int kelvin_offset;
> + struct mutex lock;
> +};
> +
> +/* ---------------------------------------------
> + Thermal Zone Management
> + --------------------------------------------- */
> +static int anatop_dump_temperature_register(void)
> +{
> + if (!anatop_base) {
> + pr_info("anatop_base is not initialized!!!\n");
> + return -EINVAL;
> + }
> +
> + pr_info("HW_ANADIG_TEMPSENSE0 = 0x%x\n",
> + __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE0));
> + pr_info("HW_ANADIG_TEMPSENSE1 = 0x%x\n",
> + __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE1));
> +}
> +
> +static int anatop_tempsense_value_to_dc(int val)
> +{
> + int val_dc;
> + val_dc = (CONVER_CONST - val) * CONVER_DIV_1024 / 1024;
> +
> + return val_dc;
> +}
> +
> +static int anatop_thermal_get_temperature(struct anatop_thermal *tz)
> +{
> + unsigned int tmp = 300;
> + unsigned int reg;
> + unsigned int i;
> + if (!tz)
> + return -EINVAL;
> +
> + tz->last_temperature = tz->temperature;
> +
> + /* now we only using single measure, every time we measure
> + the temperature, we will power on/down the anadig module*/
> + anatop_thermal_power_on();
> +
> + /* write measure freq */
> + reg = __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE1);
> + reg &= ~BM_ANADIG_TEMPSENSE1_MEASURE_FREQ;
> + reg |= MEASURE_FREQ;
> + __raw_writel(reg, anatop_base + HW_ANADIG_TEMPSENSE1);
> +
> + __raw_writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP,
> + anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
> + __raw_writel(BM_ANADIG_TEMPSENSE0_FINISHED,
> + anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
> + __raw_writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP,
> + anatop_base + HW_ANADIG_TEMPSENSE0_SET);
> +
> + tmp = 0;
> + /* read five times of temperature values to get average*/
> + for (i = 0; i < 5; i++) {
> + while ((__raw_readl(anatop_base + HW_ANADIG_TEMPSENSE0)
> + & BM_ANADIG_TEMPSENSE0_FINISHED) == 0)
> + msleep(20);
> + reg = __raw_readl(anatop_base + HW_ANADIG_TEMPSENSE0);
> + tmp += (reg & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
> + >> BP_ANADIG_TEMPSENSE0_TEMP_VALUE;
> + __raw_writel(BM_ANADIG_TEMPSENSE0_FINISHED,
> + anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
> + /* anatop_dump_temperature_register(); */
> + }
> +
> + tmp = tmp / 5;
> + tz->temperature = anatop_tempsense_value_to_dc(tmp);
> +
> + pr_debug("Temperature is %lu C\n", tz->temperature);
> + anatop_thermal_power_down();
> +
> + return 0;
> +}
> +
> +static int anatop_thermal_get_polling_frequency(struct anatop_thermal *tz)
> +{
> + /* treat the polling interval as freq */
> + tz->polling_frequency = POLLING_FREQ;
> +
> + return 0;
> +}
> +
> +static int anatop_thermal_set_cooling_mode(struct anatop_thermal *tz, int mode)
> +{
> +
> + return 0;
> +}
> +
> +#define ANATOP_TRIPS_CRITICAL 0x01
> +#define ANATOP_TRIPS_HOT 0x02
> +#define ANATOP_TRIPS_PASSIVE 0x04
> +#define ANATOP_TRIPS_ACTIVE 0x08
> +#define ANATOP_TRIPS_DEVICES 0x10
> +
> +#define ANATOP_TRIPS_INIT (ANATOP_TRIPS_CRITICAL | \
> + ANATOP_TRIPS_HOT | ANATOP_TRIPS_PASSIVE)
> +
> +static int anatop_thermal_trips_update(struct anatop_thermal *tz, int flag)
> +{
> + /* Critical Shutdown */
> + if (flag & ANATOP_TRIPS_CRITICAL) {
> + tz->trips.critical.temperature = TEMP_CRITICAL_SHUTDOWN;
> + tz->trips.critical.flags.valid = 1;
> +
> + }
> +
> + /* Critical Sleep(HOT) (optional) */
> + if (flag & ANATOP_TRIPS_HOT) {
> + tz->trips.hot.temperature = TEMP_CRITICAL_SLEEP;
> + tz->trips.hot.flags.valid = 1;
> +
> + }
> +
> + /* Passive (optional) */
> + if (flag & ANATOP_TRIPS_PASSIVE) {
> + tz->trips.passive.temperature = TEMP_PASSIVE;
> + tz->trips.passive.flags.valid = 1;
> + }
> +
> + return 0;
> +}
> +
> +static int anatop_thermal_get_trip_points(struct anatop_thermal *tz)
> +{
> + int i, valid, ret = anatop_thermal_trips_update(tz, ANATOP_TRIPS_INIT);
> +
> + if (ret)
> + return ret;
> +
> + valid = tz->trips.critical.flags.valid |
> + tz->trips.hot.flags.valid |
> + tz->trips.passive.flags.valid;
> +
> + for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE; i++)
> + valid |= tz->trips.active[i].flags.valid;
> +
> + if (!valid) {
> + printk(KERN_WARNING FW_BUG "No valid trip found\n");
> + return -ENODEV;
> + }
> + return 0;
> +}
> +
> +static void anatop_thermal_check(void *data)
> +{
> + struct anatop_thermal *tz = data;
> +
> + thermal_zone_device_update(tz->thermal_zone);
> +}
> +
> +/* sys I/F for generic thermal sysfs support */
> +#define KELVIN_TO_CEL(t, off) (((t) - (off)))
> +
> +static int thermal_get_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + struct anatop_thermal *tz = thermal->devdata;
> + int result;
> +
> + if (!tz)
> + return -EINVAL;
> + result = 0;
> + result = anatop_thermal_get_temperature(tz);
> + *temp = tz->temperature;
> + if (result)
> + return result;
> + else
> + return 0;
> +}
> +static const char enabled[] = "kernel";
> +static const char disabled[] = "user";
> +static int thermal_get_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode *mode)
> +{
> + struct anatop_thermal *tz = thermal->devdata;
> +
> + if (!tz)
> + return -EINVAL;
> +
> + *mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
> + THERMAL_DEVICE_DISABLED;
> +
> + return 0;
> +}
> +
> +static int thermal_set_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode mode)
> +{
> + struct anatop_thermal *tz = thermal->devdata;
> + int enable;
> +
> + if (!tz)
> + return -EINVAL;
> +
> + /* enable/disable thermal management from thermal driver */
> + if (mode == THERMAL_DEVICE_ENABLED)
> + enable = 1;
> + else if (mode == THERMAL_DEVICE_DISABLED)
> + enable = 0;
> + else
> + return -EINVAL;
> +
> + if (enable != tz->tz_enabled) {
> + tz->tz_enabled = enable;
> + /*
> + printk((KERN_INFO,
> + "%s anatop thermal control\n",
> + tz->tz_enabled ? enabled : disabled));
> + */
> + anatop_thermal_check(tz);
> + }
> + return 0;
> +}
> +
> +static int thermal_get_trip_type(struct thermal_zone_device *thermal,
> + int trip, enum thermal_trip_type *type)
> +{
> + struct anatop_thermal *tz = thermal->devdata;
> + int i;
> +
> + if (!tz || trip < 0)
> + return -EINVAL;
> +
> + if (tz->trips.critical.flags.valid) {
> + if (!trip) {
> + *type = THERMAL_TRIP_CRITICAL;
> + return 0;
> + }
> + trip--;
> + }
> +
> + if (tz->trips.hot.flags.valid) {
> + if (!trip) {
> + *type = THERMAL_TRIP_HOT;
> + return 0;
> + }
> + trip--;
> + }
> +
> + if (tz->trips.passive.flags.valid) {
> + if (!trip) {
> + *type = THERMAL_TRIP_PASSIVE;
> + return 0;
> + }
> + trip--;
> + }
> +
> + for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE &&
> + tz->trips.active[i].flags.valid; i++) {
> + if (!trip) {
> + *type = THERMAL_TRIP_ACTIVE;
> + return 0;
> + }
> + trip--;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
> + int trip, unsigned long *temp)
> +{
> + struct anatop_thermal *tz = thermal->devdata;
> + int i;
> +
> + if (!tz || trip < 0)
> + return -EINVAL;
> + if (tz->trips.critical.flags.valid) {
> + if (!trip) {
> + *temp = KELVIN_TO_CEL(
> + tz->trips.critical.temperature,
> + tz->kelvin_offset);
> + return 0;
> + }
> + trip--;
> + }
> +
> + if (tz->trips.hot.flags.valid) {
> + if (!trip) {
> + *temp = KELVIN_TO_CEL(
> + tz->trips.hot.temperature,
> + tz->kelvin_offset);
> + return 0;
> + }
> + trip--;
> + }
> +
> + if (tz->trips.passive.flags.valid) {
> + if (!trip) {
> + *temp = KELVIN_TO_CEL(
> + tz->trips.passive.temperature,
> + tz->kelvin_offset);
> + return 0;
> + }
> + trip--;
> + }
> +
> + for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE &&
> + tz->trips.active[i].flags.valid; i++) {
> + if (!trip) {
> + *temp = KELVIN_TO_CEL(
> + tz->trips.active[i].temperature,
> + tz->kelvin_offset);
> + return 0;
> + }
> + trip--;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
> + unsigned long *temperature) {
> + struct anatop_thermal *tz = thermal->devdata;
> +
> + if (tz->trips.critical.flags.valid) {
> + *temperature = KELVIN_TO_CEL(
> + tz->trips.critical.temperature,
> + tz->kelvin_offset);
> + return 0;
> + } else
> + return -EINVAL;
> +}
> +
> +static int thermal_notify(struct thermal_zone_device *thermal, int trip,
> + enum thermal_trip_type trip_type)
> +{
> + u8 type = 0;
> + /* struct anatop_thermal *tz = thermal->devdata; */
> +
> + if (trip_type == THERMAL_TRIP_CRITICAL)
> + type = ANATOP_THERMAL_NOTIFY_CRITICAL;
> + else if (trip_type == THERMAL_TRIP_HOT)
> + type = ANATOP_THERMAL_NOTIFY_HOT;
> + else
> + return 0;
> +/*
> + if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
> + return 1;
> +*/
> + return 0;
> +}
> +
> +typedef int (*cb)(struct thermal_zone_device *, int,
> + struct thermal_cooling_device *);
> +static int anatop_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev,
> + cb action)
> +{
> + /* struct anatop_thermal *tz = thermal->devdata; */
> +
> + int result = 0;
> +
> + return result;
> +}
> +
> +static int
> +anatop_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + return anatop_thermal_cooling_device_cb(thermal, cdev,
> + thermal_zone_bind_cooling_device);
> +}
> +
> +static int
> +anatop_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + return anatop_thermal_cooling_device_cb(thermal, cdev,
> + thermal_zone_unbind_cooling_device);
> +}
> +
> +static struct thermal_zone_device_ops anatop_thermal_zone_ops = {
> + .bind = anatop_thermal_bind_cooling_device,
> + .unbind = anatop_thermal_unbind_cooling_device,
> + .get_temp = thermal_get_temp,
> + .get_mode = thermal_get_mode,
> + .set_mode = thermal_set_mode,
> + .get_trip_type = thermal_get_trip_type,
> + .get_trip_temp = thermal_get_trip_temp,
> + .get_crit_temp = thermal_get_crit_temp,
> + .notify = thermal_notify,
> +};
> +
> +static int anatop_thermal_register_thermal_zone(struct anatop_thermal *tz)
> +{
> + int trips = 0;
> + int i;
> +
> + if (tz->trips.critical.flags.valid)
> + trips++;
> +
> + if (tz->trips.hot.flags.valid)
> + trips++;
> +
> + if (tz->trips.passive.flags.valid)
> + trips++;
> +
> + for (i = 0; i < ANATOP_THERMAL_MAX_ACTIVE
> + && tz->trips.active[i].flags.valid; i++, trips++)
> + ;
> +
> + if (tz->trips.passive.flags.valid)
> + tz->thermal_zone =
> + thermal_zone_device_register("anatoptz", trips, tz,
> + &anatop_thermal_zone_ops,
> + tz->trips.passive.tc1,
> + tz->trips.passive.tc2,
> + tz->trips.passive.tsp*100,
> + tz->polling_frequency*100);
> + else
> + tz->thermal_zone =
> + thermal_zone_device_register("anatoptz", trips, tz,
> + &anatop_thermal_zone_ops,
> + 0, 0, 0,
> + tz->polling_frequency*100);
> +#if 0
> + result = sysfs_create_link(&tz->device->dev.kobj,
> + &tz->thermal_zone->device.kobj, "thermal_zone");
> + if (result)
> + return result;
> +
> + result = sysfs_create_link(&tz->thermal_zone->device.kobj,
> + &tz->device->dev.kobj, "device");
> + if (result)
> + return result;
> +#endif
> +
> + tz->tz_enabled = 1;
> +
> + dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
> + tz->thermal_zone->id);
> + return 0;
> +}
> +/*
> +static void anatop_thermal_unregister_thermal_zone(struct anatop_thermal *tz)
> +{
> + sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
> + sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
> + thermal_zone_device_unregister(tz->thermal_zone);
> + tz->thermal_zone = NULL;
> +}
> +*/
> +
> +/* --------------------------------------------------------------
> + Driver Interface
> + ------------------------------------------------------------- */
> +static int anatop_thermal_get_info(struct anatop_thermal *tz)
> +{
> + int result = 0;
> +
> + if (!tz)
> + return -EINVAL;
> +
> + /* Get temperature [_TMP] (required) */
> + result = anatop_thermal_get_temperature(tz);
> + if (result)
> + return result;
> +
> + /* Get trip points [_CRT, _PSV, etc.] (required) */
> + result = anatop_thermal_get_trip_points(tz);
> + if (result)
> + return result;
> +
> + /* Set the cooling mode [_SCP] to active cooling (default) */
> + result = anatop_thermal_set_cooling_mode(tz,
> + ANATOP_THERMAL_MODE_ACTIVE);
> + if (!result)
> + tz->flags.cooling_mode = 1;
> +
> + /* Get default polling frequency [_TZP] (optional) */
> + anatop_thermal_get_polling_frequency(tz);
> +
> + return 0;
> +}
> +
> +static void anatop_thermal_guess_offset(struct anatop_thermal *tz)
> +{
> + tz->kelvin_offset = 273;
> +}
> +
> +static int anatop_thermal_add(struct anatop_device *device)
> +{
> + int result = 0;
> + struct anatop_thermal *tz = NULL;
> + if (!device)
> + return -EINVAL;
> +
> + tz = kzalloc(sizeof(struct anatop_thermal), GFP_KERNEL);
> + if (!tz)
> + return -ENOMEM;
> +
> + tz->device = device;
> + strcpy(device->name, ANATOP_THERMAL_DEVICE_NAME);
> + device->driver_data = tz;
> + mutex_init(&tz->lock);
> +
> + result = anatop_thermal_get_info(tz);
> + if (result)
> + goto free_memory;
> +
> + anatop_thermal_guess_offset(tz);
> +
> + result = anatop_thermal_register_thermal_zone(tz);
> + if (result)
> + goto free_memory;
> +
> + goto end;
> +
> +free_memory:
> + kfree(tz);
> +end:
> + return result;
> +}
> +static int anatop_thermal_remove(struct platform_device *pdev)
> +{
> + /* struct anatop_device *device = platform_get_drvdata(pdev); */
> + return 0;
> +}
> +
> +static int anatop_thermal_resume(struct platform_device *pdev)
> +{
> +
> + return 0;
> +}
> +static int anatop_thermal_power_on(void)
> +{
> + __raw_writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN,
> + anatop_base + HW_ANADIG_TEMPSENSE0_CLR);
> +
> + __raw_writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF,
> + anatop_base + HW_ANADIG_ANA_MISC0_SET);
> + return 0;
> +}
> +
> +static int anatop_thermal_power_down(void)
> +{
> + __raw_writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN,
> + anatop_base + HW_ANADIG_TEMPSENSE0_SET);
> +
> + __raw_writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF,
> + anatop_base + HW_ANADIG_ANA_MISC0_CLR);
> + return 0;
> +}
> +
> +static int anatop_thermal_probe(struct platform_device *pdev)
> +{
> + int retval = 0;
> + struct resource *res;
> + void __iomem *base;
> +
> + struct anatop_device *device;
> + device = kzalloc(sizeof(*device), GFP_KERNEL);
> + if (!device) {
> + retval = -ENOMEM;
> + goto device_alloc_failed;
> + }
> +
> + platform_set_drvdata(pdev, device);
> +
> + /* ioremap the base address */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (res == NULL) {
> + dev_err(&pdev->dev, "No anatop base address provided\n");
> + goto anatop_failed;
> + }
> +
> + base = ioremap(res->start, res->end - res->start);
> + if (base == NULL) {
> + dev_err(&pdev->dev, "failed to rebase anatop base address\n");
> + goto anatop_failed;
> + }
> + anatop_base = (unsigned long)base;
> +
> + anatop_thermal_add(device);
> +
> + goto success;
> +anatop_failed:
> + kfree(device);
> +device_alloc_failed:
> +success:
> + pr_info("%s\n", __func__);
> + return retval;
> +}
> +static int anatop_thermal_suspend(struct platform_device *pdev,
> + pm_message_t state)
> +{
> + return 0;
> +}
> +
> +static struct platform_driver anatop_thermal_driver_ldm = {
> + .driver = {
> + .name = "anatop_thermal",
> + .bus = &platform_bus_type,
> + },
> + .probe = anatop_thermal_probe,
> + .remove = anatop_thermal_remove,
> + .suspend = anatop_thermal_suspend,
> + .resume = anatop_thermal_resume,
> +};
> +
> +static int __init anatop_thermal_init(void)
> +{
> + pr_debug("Anatop Thermal driver loading\n");
> + return platform_driver_register(&anatop_thermal_driver_ldm);
> +}
> +
> +static void __exit anatop_thermal_exit(void)
> +{
> + platform_driver_unregister(&anatop_thermal_driver_ldm);
> + pr_debug("Anatop Thermal driver successfully unloaded\n");
> +}
> +
> +module_init(anatop_thermal_init);
> +module_exit(anatop_thermal_exit);
> --
> 1.7.7.3
>
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@...ts.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists